Seamlessly Conductive 3D Nanoarchitecture of Core–Shell Ni‐Co Nanowire Network for Highly Efficient Oxygen Evolution

Electrochemical splitting of water is an attractive way to produce hydrogen fuel as a clean and renewable energy source. However, a major challenge is to accelerate the sluggish kinetics of the anodic half‐cell reaction where oxygen evolution reaction (OER) takes place. Here, a seamlessly conductive 3D architecture is reported with a carbon‐shelled Ni‐Co nanowire network as a highly efficient OER electrocatalyst. Highly porous and granular Ni‐Co nanowires are first grown on a carbon fiber woven fabric utilizing a cost‐effective hydrothermal method and then conductive carbon shell is coated on the Ni‐Co nanowires via glucose carbonization and annealing processes. The conductive carbon layer surrounding the nanowires is introduced to provide a continuous pathway for facile electron transport throughout the whole of the integrated 3D catalyst. This 3D hierarchical structure provides several synergistic effects and beneficial functions including a large number of active sites, easy accessibility of water, fast electron transport, rapid release of oxygen gas, enhanced electrochemical durability, and stronger structural integrity, resulting in a remarkable OER activity that delivers an overpotential of 302 mV with a Tafel slope of 43.6 mV dec^?1 at a current density of 10 mA cm^?2 in an alkaline medium electrolyte (1 m KOH).     

Tailored Electron Transfer Pathways in Aucore/Ptshell–Graphene Nanocatalysts for Fuel Cells

Au_core/Pt_shell–graphene catalysts (G‐Cys‐Au@Pt) are prepared through chemical and surface chemical reactions. Au–Pt core–shell nanoparticles (Au@Pt NPs) covalently immobilized on graphene (G) are efficient electrocatalysts in low‐temperature polymer electrolyte membrane fuel cells. The 9.5 ± 2 nm Au@Pt NPs with atomically thin Pt shells are attached on graphene via l ‐cysteine (Cys), which serves as linkers controlling NP loading and dispersion, enhancing the Au@Pt NP stability, and facilitating interfacial electron transfer. The increased activity of G‐Cys‐Au@Pt, compared to non‐chemically immobilized G‐Au@Pt and commercial platinum NPs catalyst (C‐Pt), is a result of (1) the tailored electron transfer pathways of covalent bonds integrating Au@Pt NPs into the graphene framework, and (2) synergetic electronic effects of atomically thin Pt shells on Au cores. Enhanced electrocatalytic oxidation of formic acid, methanol, and ethanol is observed as higher specific currents and increased stability of G‐Cys‐Au@Pt compared to G‐Au@Pt and C–Pt. Oxygen reduction on G‐Cys‐Au@Pt occurs at 25 mV lower potential and 43 A g_Pt^?1 higher current (at 0.9 V vs reversible hydrogen electrode) than for C–Pt. Functional tests in direct fomic acid, methanol and ethanol fuel cells exhibit 95%, 53%, and 107% increased power densities for G‐Cys‐Au@Pt over C–Pt, respectively.     

Hierarchical NiCo2S4@NiO Core–Shell Heterostructures as Catalytic Cathode for Long‐Life Li‐O2 Batteries

The critical challenges of Li‐O₂ batteries lie in sluggish oxygen redox kinetics and undesirable parasitic reactions during the oxygen reduction reaction and oxygen evolution reaction processes, inducing large overpotential and inferior cycle stability. Herein, an elaborately designed 3D hierarchical heterostructure comprising NiCo₂S₄@NiO core–shell arrays on conductive carbon paper is first reported as a freestanding cathode for Li‐O₂ batteries. The unique hierarchical array structures can build up multidimensional channels for oxygen diffusion and electrolyte impregnation. A built‐in interfacial potential between NiCo₂S₄ and NiO can drastically enhance interfacial charge transfer kinetics. According to density functional theory calculations, intrinsic LiO₂‐affinity characteristics of NiCo₂S₄ and NiO play an importantly synergistic role in promoting the formation of large peasecod‐like Li₂O₂, conducive to construct a low‐impedance Li₂O₂/cathode contact interface. As expected, Li‐O₂ cells based on NiCo₂S₄@NiO electrode exhibit an improved overpotential of 0.88 V, a high discharge capacity of 10 050 mAh g^?1 at 200 mA g^?1, an excellent rate capability of 6150 mAh g^?1 at 1.0 A g^?1, and a long‐term cycle stability under a restricted capacity of 1000 mAh g^?1 at 200 mA g^?1. Notably, the reported strategy about heterostructure accouplement may pave a new avenue for the effective electrocatalyst design for Li‐O₂ batteries.     

Rational Core–Shell Design of Open Air Low Temperature In Situ Processable CsPbI3 Quasi‐Nanocrystals for Stabilized p‐i‐n Solar Cells

As a promising alternative, inorganic perovskite nanocrystals allow reinforced stability of photovoltaic device. Unfortunately, directly assembling these nanocrystals into film is uncontrollable. Instead, in situ assembling technology under low temperature in open air is attractive but limited due to the tendency of nonperovskite transition. The adverse shell ligands and unstable core lattices are known as the fundamental problems. In order to address this issue, here proposed is a rational core–shell design: 1) with respect to ligands, a new one, 4‐fluorophenethylammonium iodide, is used to enhance bonding force and charge coupling between ligands and nanocrystals; 2) with respect to lattices, a novel compound H₂PbI₄ is employed to assist divalent ion (Mn²⁺) doping into perovskite lattices. By low temperature in situ processing CsPbI₃ quasi‐nanocrystal film, the highest power conversion efficiency of 13.4% for p‐i‐n solar cells is achieved, which retains 92% after 500 h in ambient air. The current study underlines the significance of rational hierarchical design of inorganic perovskite nanocrystals, especially for low temperature in situ processable electronic devices.     

General Dimension‐Controlled Synthesis of Hollow Carbon Embedded with Metal Singe Atoms or Core–Shell Nanoparticles for Energy Storage Applications

Metal–organic framework (MOF) derived carbonaceous nanocomposites have recently received enormous interest due to their intriguing physiochemical properties and diverse energy applications. However, there is a lack of general synthetic approaches that can achieve flexible dimension control while manipulating metal dispersion of MOF derived carbon composites. Herein, the authors present an attractive route for the growth of zeolitic imidazolate frameworks (ZIFs) with different dimensions and types of metal nodes that can be further transformed into either core–shell nanoparticles or metal single atoms. The formation of a ZIF‐8 seed layer on ZnO template is identified as the key step, enabling uniform growth of various ZIF materials (e.g., Zn/Co‐ZIF, Zn/Fe‐ZIF, and ZIF‐7) with different dimensions (1D, 2D, and 3D). Simultaneously, this approach avoids free growth of 0D MOF particles and diminishing of the ZnO template. To demonstrate the importance of dimensional control over the growth of ZIF materials for energy application, the 1D and 2D ZnO@ZIF precursors are converted into carbon nanotube and carbon nanoplate, which are decorated with Co/CoS₂ nanoparticles and Fe single atoms, respectively. Two high dimensional carbon nanocomposites deliver significantly enhanced performances compared to their 0D counterparts when employed as the Li‐ion battery anode and bifunctional oxygen electrocatalyst.     

A Stable Graphitic,Nanocarbon‐Encapsulated,Cobalt‐Rich Core–Shell Electrocatalyst as an Oxygen Electrode in a Water Electrolyzer

The oxygen electrode plays a vital role in the successful commercialization of renewable energy technologies, such as fuel cells and water electrolyzers. In this study, the Prussian blue analogue‐derived nitrogen‐doped nanocarbon (NC) layer‐trapped, cobalt‐rich, core–shell nanostructured electrocatalysts (core–shell Co@NC) are reported. The electrode exhibits an improved oxygen evolution activity and stability compared to that of the commercial noble electrodes. The core–shell Co@NC‐loaded nickel foam exhibits a lower overpotential of 330 mV than that of IrO₂ on nickel foam at 10 mA cm^?2 and has a durability of over 400 h. The commercial Pt/C cathode‐assisted, core–shell Co@NC–anode water electrolyzer delivers 10 mA cm^?2 at a cell voltage of 1.59 V, which is 70 mV lower than that of the IrO₂–anode water electrolyzer. Over the long‐term chronopotentiometry durability testing, the IrO₂–anode water electrolyzer shows a cell voltage loss of 230 mV (14%) at 95 h, but the loss of the core–shell Co@NC–anode electrolyzer is only 60 mV (4%) even after 350 h cell‐operation. The findings indicate that the Prussian blue analogue is a class of inorganic nanoporous materials that can be used to derive metal‐rich, core–shell electrocatalysts with enriched active centers.     

In Situ Tin(II) Complex Antisolvent Process Featuring Simultaneous Quasi‐Core–Shell Structure and Heterojunction for Improving Efficiency and Stability of Low‐Bandgap Perovskite Solar Cells

Unlike Pb‐based perovskites, it is still a challenge for realizing the targets of high performance and stability in mixed Pb–Sn perovskite solar cells owing to grain boundary traps and chemical changes in the perovskites. In this work, proposed is the approach of in‐situ tin(II) inorganic complex antisolvent process for specifically tuning the perovskite nucleation and crystal growth process. Interestingly, uniquely formed is the quasi‐core–shell structure of Pb–Sn perovskite–tin(II) complex as well as heterojunction perovskite structure at the same time for achieving the targets. The core–shell structure of Pb–Sn perovskite crystals covered by a tin(II) complex at the grain boundaries effectively passivates the trap states and suppresses the nonradiative recombination, leading to longer carrier lifetime. Equally important, the perovskite heterostructure is intentionally formed at the perovskite top region for enhancing the carrier extraction. As a result, the mixed Pb–Sn low‐bandgap perovskite device achieves a high power conversion efficiency up to 19.03% with fill factor over 0.8, which is among the highest fill factor in high‐performance Pb–Sn perovskite solar cells. Remarkably, the device fail time under continuous light illumination is extended by over 18.5‐folds from 30 to 560 h, benefitting from the protection of the quasi‐core–shell structure.     

Sequential Synthesis and Active‐Site Coordination Principle of Precious Metal Single‐Atom Catalysts for Oxygen Reduction Reaction and PEM Fuel Cells

Carbon‐supported precious metal single‐atom catalysts (PM SACs) have shown promising application in proton exchange membrane fuel cells (PEMFCs). However, the coordination principle of the active site, consisting of one PM atom and several coordinating anions, is still unclear for PM SACs. Here, a sequential coordination method is developed to dope a large amount of PM atoms (Ir, Rh, Pt and Pd) into a zeolite imidazolate framework (ZIF), which are further pyrolyzed into nitrogen‐coordinated PM SACs. The PM loadings are as high as 1.2–4.5 wt%, achieving the highest PM loadings in ZIF‐derived SACs to date. In the acidic half‐cell, Ir₁‐N/C and Rh₁‐N/C exhibit much higher oxygen reduction reaction (ORR) activities than nanoparticle catalysts Ir/C and Rh/C. In the contrast, the activities of Pd₁‐N/C and Pt₁‐N/C are considerably lower than Pd/C and Pt/C. Density function theory (DFT) calculations reveal that the ORR activity of PM SAC depends on the match between the OH* adsorption on PM and the electronegativity of coordinating anions, and the stronger OH* adsorption is, the higher electronegativity is needed for the coordinating anions. PEMFC tests confirm the active‐site coordination principle and show the extremely high atomic efficiency of Ir₁‐N/C. The revealed principle provides guidance for designing future PM SACs for PEMFCs.     

Novel Route to Fe‐Based Cathode as an Efficient Bifunctional Catalysts for Rechargeable Zn–Air Battery

Efficient bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts are of great importance for rechargeable metal–air batteries. Herein, FeN_x/C catalysts are synthesized by pyrolysis of thiourea and agarose containing α‐Fe₂O₃ nanoplate as Fe precursor, where α‐Fe₂O₃ nanoplate can prevent the aggregation of carbon sheets to effectively improve the specific surface area during the carbonization process. The FeN_x/C‐700‐20 catalyst displays excellent catalytic performance for both ORR and OER activity in alkaline conditions with more positive onset potential (1.1 V vs the reversible hydrogen electrode) and half‐wave potential, higher stability, and stronger methanol tolerance in alkaline solution, which are all superior to that of the commercial Pt/C catalyst. In this study, the detailed analyses demonstrate that the coexistence of Fe‐based species and high content of Fe‐N_x both play an important role for the catalytic activity. Furthermore, FeN_x/C‐700‐20 as cathode catalyst in Zn–air battery possesses higher charge–discharge stability and power density compared with that of commercial Pt/C catalyst, displaying great potential in practical implementation of for the rechargeable energy devices.     

Biomass‐Derived 3D Carbon Aerogel with Carbon Shell‐Confined Binary Metallic Nanoparticles in CNTs as an Efficient Electrocatalyst for Microfluidic Direct Ethylene Glycol Fuel Cells

Flexible and 3D carbon aerogels (CAs) composed of carbon nanotubes (CNTs) with carbon shell‐confined binary palladium–nickel (Pd_x–Ni_y) nanocatalysts on carbon fibers (Pd_x–Ni_y/NSCNT/CA) have been developed through a facile chemical vapor deposition method. The 3D porous carbon network and the synergistic effect of carbon shell‐confined bimetal nanoparticles of rationally constructed aerogels facilitate enhanced electrocatalytic and antipoisoning activities toward ethylene glycol (EG) oxidation reaction compared to the commercial Pt/C catalyst. With the 3D morphological features and direct growth of Pd–Ni bimetallic nanoparticles encapsulated CNTs on carbon fibers, the Pd₅₂–Ni₄₈/NSCNT/CA delivers a maximum microfluidic direct ethylene glycol fuel cell (µDEGFC) power density and durability of, respectively, 62.8 mW cm^?2 and 60 h. The superior performance observed, with Pd₅₂–Ni₄₈/NSCNT/CA amongst the catalysts reported in the literature, opens an exciting research avenue towards powering next‐generation, portable electronics.     

NiFe Layered Double Hydroxide Nanoparticles on Co,N‐Codoped Carbon Nanoframes as Efficient Bifunctional Catalysts for Rechargeable Zinc–Air Batteries

The future large‐scale deployment of rechargeable zinc–air batteries requires the development of cheap, stable, and efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this work, a highly efficient bifunctional electrocatalyst is prepared by depositing 3–5 nm NiFe layered double hydroxide (NiFe‐LDH) nanoparticles on Co,N‐codoped carbon nanoframes (Co,N‐CNF). The NiFe‐LDH/Co,N‐CNF electrocatalyst displayed an OER overpotential of 0.312 V at 10 mA cm^?2 and an ORR half‐wave potential of 0.790 V. The outstanding performance of the electrocatalyst is attributable to the high electrical conductivity and excellent ORR activity of Co,N‐CNF, together with the strong anchoring of 3–5 nm NiFe‐LDH nanoparticles, which preserves active sites. Inspired by the excellent OER and ORR performance of NiFe‐LDH/Co,N‐CNF, a prototype rechargeable zinc–air battery is developed. The battery exhibited a low discharge–charge voltage gap (1.0 V at 25 mA cm^?2) and long‐term cycling durability (over 80 h), and superior overall performance to a counterpart battery constructed using a mixture of IrO₂ and Pt/C as the cathode. The strategy developed here can easily be adapted to synthesize other bifunctional CNF‐based hybrid electrodes for ORR and OER, providing a practical route to more efficient rechargeable zinc–air batteries.     

NiFe‐Based Metal–Organic Framework Nanosheets Directly Supported on Nickel Foam Acting as Robust Electrodes for Electrochemical Oxygen Evolution Reaction

It is of great significance to develop highly efficient and superior stable oxygen evolution reaction (OER) electrocatalysts for upcoming electrochemical conversion technologies and clean energy systems. Here, an assembled 3D electrode is synthesized by a one‐step solvothermal process using such an original OER electrocatalyst. During the solvothermal process, Ni ions released from Ni foam in acidic solution and Fe ions added exogenously act as metal centers and coordinate with terephthalic acid (TPA) organic molecules by robust coordinate bonds, and finally, NiFe‐based metal–organic framework (MOF) nanosheets in situ grown on Ni foam, i.e., MIL‐53(FeNi)/NF, are prepared. This binder‐free 3D electrode shows superior OER activity with high current density (50 mA cm^?2) at an overpotential of 233 mV, a Tafel slope of 31.3 mV dec^?1, and excellent stability in alkaline aqueous solution (1 m KOH). It is discovered that introduction of Fe into MIL‐53 structure increases electrochemically‐active areas as well as reaction sites, accelerated electron transport capability, and modulated electronic structure to enhance catalytic performance. Besides, first principles calculations show that MIL‐53(FeNi) is more favorable for foreign atoms' adsorption and has increased 3d orbital electron density boosting intrinsic activity. This work elucidates a promising electrode for electrocatalysts and enriches direct application of MOF materials.     

Atomic Fe‐Doped MOF‐Derived Carbon Polyhedrons with High Active‐Center Density and Ultra‐High Performance toward PEM Fuel Cells

A metalorganic gaseous doping approach for constructing nitrogen‐doped carbon polyhedron catalysts embedded with single Fe atoms is reported. The resulting catalysts are characterized using scanning transmission electron microscopy, X‐ray photoelectron spectroscopy, and X‐ray absorption spectroscopy; for the optimal sample, calculated densities of Fe–N_x sites and active N sites reach 1.75812 × 10¹³ and 1.93693 × 10¹⁴ sites cm^‐2, respectively. Its oxygen reduction reaction half‐wave potential (0.864 V) is 50 mV higher than that of 20 wt% Pt/C catalyst in an alkaline medium and comparable to the latter (0.78 V vs 0.84 V) in an acidic medium, along with outstanding durability. More importantly, when used as a hydrogen–oxygen polymer electrolyte membrane fuel cell (PEMFC) cathode catalyst with a catalyst loading as low as 1 mg cm^‐2 (compared with a conventional loading of 4 mg cm^‐2), it exhibits a current density of 1100 mA cm^‐2 at 0.6 V and 637 mA cm^‐2 at 0.7 V, with a power density of 775 mW cm^‐2, or 0.775 kW g^–1 of catalyst. In a hydrogen–air PEMFC, current density reaches 650 mA cm^‐2 at 0.6 V and 350 mA cm^‐2 at 0.7 V, and the maximum power density is 463 mW cm^‐2, which makes it a promising candidate for cathode catalyst toward high‐performance PEMFCs.     

Bifunctional Conducting Polymer Coated CoP Core–Shell Nanowires on Carbon Paper as a Free‐Standing Anode for Sodium Ion Batteries

This study proposes a conformal surface coating of conducting polymer for protecting 1D nanostructured electrode material, thereby enabling a free‐standing electrode without binder for sodium ion batteries. Here, polypyrrole (PPy), which is one of the representative conducting polymers, encapsulated cobalt phosphide (CoP) nanowires (NWs) grown on carbon paper (CP), finally realizes 1D core–shell CoP@PPy NWs/CP. The CoP core is connected to the PPy shell via strong chemical bonding, which can maintain a Co–PPy framework during charge/discharge. It also possesses bifunctional features that enhances the charge transfer and buffers the volume expansion. Consequently, 1D core–shell CoP@PPy NWs/CP demonstrates superb electrochemical performance, delivering a high areal capacity of 0.521 mA h cm^?2 at 0.15 mA cm^?2 after 100 cycles, and 0.443 mA h cm^?2 at 1.5 mA cm^?2 even after 1000 cycles. Even at a high current density of 3 mA cm^?2, a significant areal discharge capacity reaching 0.285 mA h cm^?2 is still maintained. The outstanding performance of the CoP@PPy NWs/CP free‐standing anode provides not only a novel insight into the modulated volume expansion of anode materials but also one of the most effective strategies for binder‐free and free‐standing electrodes with decent mechanical endurance for future secondary batteries.     

Hierarchical Porous Carbonized Co3O4 Inverse Opals via Combined Block Copolymer and Colloid Templating as Bifunctional Electrocatalysts in Li–O2 Battery

Hierarchically organized porous carbonized‐Co₃O₄ inverse opal nanostructures (C‐Co₃O₄ IO) are synthesized via complementary colloid and block copolymer self‐assembly, where the triblock copolymer Pluronic P123 acts as the template and the carbon source. These highly ordered porous inverse opal nanostructures with high surface area display synergistic properties of high energy density and promising bifunctional electrocatalytic activity toward both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). It is found that the as‐made C‐Co₃O₄ IO/Ketjen Black (KB) composite exhibits remarkably enhanced electrochemical performance, such as increased specific capacity (increase from 3591 to 6959 mA h g^?1), lower charge overpotential (by 284.4 mV), lower discharge overpotential (by 19.0 mV), and enhanced cyclability (about nine times higher than KB in charge cyclability) in Li–O₂ battery. An overall agreement is found with both C‐Co₃O₄ IO/KB and Co₃O₄ IO/KB in ORR and OER half‐cell tests using a rotating disk electrode. This enhanced catalytic performance is attributed to the porous structure with highly dispersed carbon moiety intact with the host Co₃O₄ catalyst.     

Graphitic Nanoshell/Mesoporous Carbon Nanohybrids as Highly Efficient and Stable Bifunctional Oxygen Electrocatalysts for Rechargeable Aqueous Na–Air Batteries

Efficient and cost‐effective bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are of vital importance in energy conversion and storage devices. Despite the recent progress in bifunctional oxygen electrocatalysts, their unbalanced and insufficient OER and ORR activities has continued to pose challenges for the practical application of such energy devices. The design of highly integrated, high‐performance, bifunctional oxygen electrocatalysts composed of highly graphitic nanoshells embedded in mesoporous carbon (GNS/MC) is reported. The GNS/MC exhibits very high oxygen electrode activity, which is one of the best performances among nonprecious metal bifunctional oxygen electrocatalysts, and substantially outperforms Ir‐ and Pt‐based catalysts. Moreover, the GNS/MC shows excellent durability for both OER and ORR. In situ X‐ray absorption spectroscopy and square wave voltammetry reveal the roles of residual Ni and Fe entities in enhancing OER and ORR activities. Raman spectra indicate highly graphitic, defect‐rich nature of the GNS/MC, which can contribute to the enhanced OER activity and to high stability for the OER and ORR. In aqueous Na–air battery tests, the GNS/MC air cathode‐based cell exhibits superior performance to Ir/C‐ and Pt/C‐based batteries. Significantly, the GNS/MC‐based cell demonstrates the first example of rechargeable aqueous Na–air battery.