Transition Metal Sulfides Based on Graphene for Electrochemical Energy Storage

Transition metal sulfides, as an important class of inorganics, can be used as excellent electrode materials for various types of electrochemical energy storage, such as lithium‐ion batteries, sodium‐ion batteries, supercapacitors, and others. Recent works have identified that mixing graphene or graphene derivatives with transition metal sulfides can result in novel composites with better electrochemical performance. This review summarizes the latest advances in transition metal sulfide composites with graphene or graphene derivatives. The synthetic strategies and morphologies of these composites are introduced. The authors then discuss their applications in lithium‐ion batteries, sodium‐ion batteries, and supercapacitors. Finally, the authors give their personal viewpoints about the challenges and opportunities for the future development about this direction.     

One‐Step Fabrication of Ultrathin Porous Nickel Hydroxide‐Manganese Dioxide Hybrid Nanosheets for Supercapacitor Electrodes with Excellent Capacitive Performance

A facile one‐step hydrothermal co‐deposition method for growth of ultrathin Ni(OH)₂‐MnO₂ hybrid nanosheet arrays on three dimensional (3D) macroporous nickel foam is presented. Due to the highly hydrophilic and ultrathin nature of hybrid nanosheets, as well as the synergetic effects of Ni(OH)₂ and MnO₂, the as‐fabricated Ni(OH)₂‐MnO₂ hybrid electrode exhibits an ultrahigh specific capacitance of 2628 F g^?1. Moreover, the asymmetric supercapacitor with the as‐obtained Ni(OH)₂‐MnO₂ hybrid film as the positive electrode and the reduced graphene oxide as the negative electrode has a high energy density (186 Wh kg^?1 at 778 W kg^?1), based on the total mass of active materials.     

Molten‐NaNH2 Densified Graphene with In‐Plane Nanopores and N‐Doping for Compact Capacitive Energy Storage

Capacitive carbons are attractive for energy storage on account of their superior rate and cycling performance over traditional battery materials, but they usually suffer from a far lower volumetric energy density. Starting with expanded graphene, a simple, multifunctional molten sodium amide treatment for the preparation of high‐density graphene with high capacitive performance in both aqueous and lithium battery electrolytes is reported. The molten sodium amide can condense the expanded graphene, lead to nitrogen doping and, what is more important, create moderate in‐plane nanopores on graphene to serve as ion access shortcuts in dense graphene stacks. The resulting high‐density graphene electrode can deliver a volumetric capacitance of 522 F cm^?3 in a potassium hydroxide electrolyte; and in a lithium‐ion battery electrolyte, it exhibits a gravimetric and volumetric energy density of 618 W h kg^?1 and 740 W h L^?1, respectively, and even outperforms commercial LiFePO₄.     

Large‐Area,Ultrathin Inorganic Network Coverages–Graphene Hierarchical Electrodes for Flexible,Heat‐Resistant Energy Storage Application

Graphene and quasi‐2D graphene‐like materials with an ultrathin thickness have been investigated as a new class of nanoscale materials due to their distinctive properties. A novel “molecular tools‐assistances” strategy is developed to fabricate two kinds of graphene‐based electrodes, ultrathin Fe‐doped MnO₂ network coverage–graphene composites (G‐MFO) and ultrathin MoS₂ network coverage–graphene composites (G‐MoS₂) with special hierarchical structures. Such structures enable a large contact interface between the active materials and graphene and thus fully exploit the synergistic effect from both the high specific capacitance of MFO or MoS₂ and the superb conductivity of graphene. Benefiting from their unique structural features, G‐MFO and G‐MoS₂ films directly use as free‐standing electrodes for flexible asymmetric supercapacitors with a nonaqueous gel electrolyte. The device achieves a high energy/power density, superior flexibility, good rate capability as well as outstanding performance stability even at a high temperature. This work represents a promising prototype to design new generation of hybrid supercapacitors for future energy storage devices.     

Nanostructured Ternary Electrodes for Energy‐Storage Applications

A three‐component, flexible electrode is developed for supercapacitors over graphitized carbon fabric, utilizing γ‐MnO₂ nanoflowers anchored onto carbon nanotubes (γ‐MnO₂/CNT) as spacers for graphene nanosheets (GNs). The three‐component, composite electrode doubles the specific capacitance with respect to GN‐only electrodes, giving the highest‐reported specific capacitance (308 F g^?1) for symmetric supercapacitors containing MnO₂ and GNs using a two‐electrode configuration, at a scan rate of 20 mV s^?1. A maximum energy density of 43 W h kg^?1 is obtained for our symmetric supercapacitors at a constant discharge‐current density of 2.5 A g^?1 using GN–(γ‐MnO₂/CNT)‐nanocomposite electrodes. The fabricated supercapacitor device exhibits an excellent cycle life by retaining ≈90% of the initial specific capacitance after 5000 cycles.     

Textile‐Based Electrochemical Energy Storage Devices

In the past few years, insensitive attentions have been drawn to wearable and flexible energy storage devices/systems along with the emergence of wearable electronics. Much progress has been achieved in developing flexible electrochemical energy storage devices with high end‐use performance. However, challenges still remain in well balancing the electrochemical properties, mechanical properties, and the processing technologies. In this review, a specific perspective on the development of textile‐based electrochemical energy storage devices (TEESDs), in which textile components and technologies are utilized to enhance the energy storage ability and mechanical properties of wearable electronic devices, is provided. The discussion focuses on the material preparation and characteristics, electrode and device fabrication strategies, electrochemical performance and metrics, wearable compatibility, and fabrication scalability of TEESDs including textile‐based supercapacitors and lithium‐ion batteries.     

Spatial Charge Storage within Honeycomb‐Carbon Frameworks for Ultrafast Supercapacitors with High Energy and Power Densities

Carbon‐based supercapacitors store charge through the adsorption of electrolyte ions onto the carbon surface. Therefore, it would be more attractive for the enhanced charge storage if the locations for storing charge can be extended from carbon surface to space. Here, a novel spatial charge storage mechanism based on counterion effect from Fe(CN)₆^3? ions bridged by oxygen groups and confined into honeycomb‐carbon frameworks is presented, which can provide additionally spatial charge storage for electrical double‐layer capacitances in a negative potential region and pseudocapacitances from Fe(CN)₆^3?/Fe(CN)₆^4? in a positive potential region. More importantly, an ultrafast supercapacitor based on this novelty carbon can be charged/discharged within 0.7 s to deliver both high specific energy of 15 W h kg^?1 and ultrahigh specific power of 79.1 kW kg^?1 in 1 m Na₂SO₄ electrolyte, much higher than those of previously reported asymmetric supercapacitors in aqueous electrolytes, as well as excellent cycling stability. These features suggest a new generation of ultrafast asymmetric supercapacitors as novel high‐performance energy storage devices.     

Aniline Tetramer‐Graphene Oxide Composites for High Performance Supercapacitors

Polyaniline (PANI), a promising conducting polymer for supercapacitor, exhibits high specific capacitance and good rate capability. However, it suffers from low cycling stability due to the breakage or scission of polymer chains and loss of contact caused by the volume change during the charge–discharge, as well as the irreversible oxidation and reduction. Here, a strategy for using aniline tetramers loaded on graphene oxide (AT‐GO) is developed to prevent chain breaking and increase the tolerance of volume change. The potential window is also controlled to reduce the irreversible reactions. In a three electrode test, AT‐GO exhibits a good cycling stability with specific capacitance remaining more than 93 to 96% after 2000 cycles. In a two electrode test, the specific capacitance remains 97.7% of its initial specific capacitance after 2000 cycles by suppressing the side reactions. AT‐GO also shows a high specific capacitance of more than 769 F g^?1 at 1 A g^?1 and it remains 581 F g^?1 at 60 A g^?1, suggesting a good rate capability. These results suggest that AT‐GO is a promising electrode material for practical applications.     

Facile Synthesis of 3D MnO2–Graphene and Carbon Nanotube–Graphene Composite Networks for High‐Performance,Flexible, All‐Solid‐State Asymmetric Supercapacitors

The integration of graphene nanosheets on the macroscopic level using a self‐assembly method has been recognized as one of the most effective strategies to realize the practical applications of graphene materials. Here, a facile and scalable method is developed to synthesis two types of graphene‐based networks, manganese dioxide (MnO₂)–graphene foam and carbon nanotube (CNT)–graphene foam, by solution casting and subsequent electrochemical methods. Their practical applications in flexible all‐solid‐state asymmetric supercapacitors are explored. The proposed method facilitates the structural integration of graphene foam and the electroactive material and offers several advantages including simplicity, efficiency, low‐temperature, and low‐cost. The as‐prepared MnO₂–graphene and CNT–graphene electrodes exhibit high specific capacitances and rate capability. By using polymer gel electrolytes, a flexible all‐solid‐state asymmetric supercapacitor was synthesized with MnO₂–graphene foam as the positive electrode and CNT‐graphene as the negative electrode. The asymmetric supercapacitors can be cycled reversibly in a high‐voltage region of 0 to 1.8 V and exhibit high energy density, remarkable rate capability, reasonable cycling performance, and excellent flexibility.     

Sulfidation of NiMn‐Layered Double Hydroxides/Graphene Oxide Composites toward Supercapacitor Electrodes with Enhanced Performance

Supercapacitors can deliver high‐power density and long cycle stability, but the limited energy density due to poor electronic and ionic conductivity of the supercapacitor electrode has been a bottleneck in many applications. A strategy to prepare microflower‐like NiMn‐layered double hydroxides (LDH) with sulfidation is delineated to reduce the charge transfer resistance of supercapacitor electrode and realize faster reversible redox reactions with notably enhanced specific capacitance. The incorporation of graphite oxide (GO) in NiMn LDH during sulfidation leads to simultaneous reduction of GO with enhanced conductivity, lessened defects, and doping of S into the graphitic structure. Cycling stability of the sulfidized composite electrode is enhanced due to the alleviation of phase transformation during electrochemical cycling test. As a result, this sulfidation product of LDH/GO (or LDHGOS) can reach a high‐specific capacitance of 2246.63 F g^?1 at a current density of 1 A g^?1, and a capacitance of 1670.83 F g^?1 is retained at a high‐current density of 10 A g^?1, exhibiting an outstanding capacitance and rate performance. The cycling retention of the LDHGOS electrode is also extended to ≈ 67% after 1500 cycles compared to only ≈44% of the pristine NiMn LDH.     

Graphene Quantum Dots‐Based Advanced Electrode Materials: Design,Synthesis and Their Applications in Electrochemical Energy Storage and Electrocatalysis

Graphene quantum dots (GQDs) have aroused great interest in the scientific community in recent years due to their unique physicochemical properties and potential applications in different fields. To date, much research has been conducted on the ingenious design and rational construction of GQDs‐based nanomaterials used as electrode materials and/or electrocatalysts. Despite these efforts, research on the efficient synthesis and application of GQDs‐based nanomaterials is still in the early stages of development and timely updates of recent research progress on new design concepts, synthetic strategies, and significant breakthroughs in GQDs‐based nanomaterials are highly desired. In light of the above, the effect of synthetic methods on the final product of the GQDs, the GQDs synthesis mechanism, and specific perspectives regarding the effect of the unique surface and structural properties of GQDs (e.g., defects, heteroatom doping, surface/edge state, size, conductivity) on the electrochemical energy‐related systems are discussed in‐depth in this review. Additionally, this review also focuses on the design of GQDs‐based composites and their applications in the fields of electrochemical energy storage (e.g., supercapacitors and batteries) and electrocatalysis (e.g., fuel cell, water splitting, CO₂ reduction), along with constructive suggestions for addressing the remaining challenges in the field.     

In Situ Generation of Few‐Layer Graphene Coatings on SnO2‐SiC Core‐Shell Nanoparticles for High‐Performance Lithium‐Ion Storage

A simple ball‐milling method is used to synthesize a tin oxide‐silicon carbide/few‐layer graphene core‐shell structure in which nanometer‐sized SnO₂ particles are uniformly dispersed on a supporting SiC core and encapsulated with few‐layer graphene coatings by in situ mechanical peeling. The SnO₂‐SiC/G nanocomposite material delivers a high reversible capacity of 810 mA h g^?1 and 83% capacity retention over 150 charge/discharge cycles between 1.5 and 0.01 V at a rate of 0.1 A g^?1. A high reversible capacity of 425 mA h g^?1 also can be obtained at a rate of 2 A g^?1. When discharged (Li extraction) to a higher potential at 3.0 V (vs. Li/Li⁺), the SnO₂‐SiC/G nanocomposite material delivers a reversible capacity of 1451 mA h g^?1 (based on the SnO₂ mass), which corresponds to 97% of the expected theoretical capacity (1494 mA h g^?1, 8.4 equivalent of lithium per SnO₂), and exhibits good cyclability. This result suggests that the core‐shell nanostructure can achieve a completely reversible transformation from Li_4.4Sn to SnO₂ during discharging (i.e., Li extraction by dealloying and a reversible conversion reaction, generating 8.4 electrons). This suggests that simple mechanical milling can be a powerful approach to improve the stability of high‐performance electrode materials involving structural conversion and transformation.     

Mixed Metal Sulfides for Electrochemical Energy Storage and Conversion

Mixed metal sulfides (MMSs) have attracted increased attention as promising electrode materials for electrochemical energy storage and conversion systems including lithium‐ion batteries (LIBs), sodium‐ion batteries (SIBs), hybrid supercapacitors (HSCs), metal–air batteries (MABs), and water splitting. Compared with monometal sulfides, MMSs exhibit greatly enhanced electrochemical performance, which is largely originated from their higher electronic conductivity and richer redox reactions. In this review, recent progresses in the rational design and synthesis of diverse MMS‐based micro/nanostructures with controlled morphologies, sizes, and compositions for LIBs, SIBs, HSCs, MABs, and water splitting are summarized. In particular, nanostructuring, synthesis of nanocomposites with carbonaceous materials and fabrication of 3D MMS‐based electrodes are demonstrated to be three effective approaches for improving the electrochemical performance of MMS‐based electrode materials. Furthermore, some potential challenges as well as prospects are discussed to further advance the development of MMS‐based electrode materials for next‐generation electrochemical energy storage and conversion systems.     

Scalable,Self‐Aligned Printing of Flexible Graphene Micro‐Supercapacitors

Graphene micro‐supercapacitors (MSCs) are an attractive energy storage technology for powering miniaturized portable electronics. Despite considerable advances in recent years, device fabrication typically requires conventional microfabrication techniques, limiting the translation to cost‐effective and high‐throughput production. To address this issue, we report here a self‐aligned printing process utilizing capillary action of liquid inks in microfluidic channels to realize scalable, high‐fidelity manufacturing of graphene MSCs. Microstructured ink receivers and capillary channels are imprinted on plastic substrates and filled by inkjet printing of functional materials into the receivers. The liquid inks move under capillary flow into the adjoining channels, allowing reliable patterning of electronic materials in complex structures with greatly relaxed printing tolerance. Leveraging this process with pristine graphene and ion gel inks, miniaturized all‐solid‐state graphene MSCs are demonstrated to concurrently achieve outstanding resolution (active footprint: <1 mm², minimum feature size: 20 µm) and yield (44/44 devices), while maintaining a high specific capacitance (268 µF cm^–2) and robust stability to extended cycling and bending, establishing an effective route to scale down device size while scaling up production throughput.     

3D Nanostructures for the Next Generation of High‐Performance Nanodevices for Electrochemical Energy Conversion and Storage

Among the different nanostructures that have been demonstrated as promising materials for various applications, 3D nanostructures have attracted significant attention as building blocks for constructing high‐performance nanodevices. Particularly over the last decade, considerable research efforts have been devoted to designing, fabricating, and evaluating 3D nanostructures as electrodes for electrochemical energy conversion and storage devices. Although remarkable progress has been achieved, the performance of electrochemical energy devices based on 3D nanostructures in terms of energy conversion efficiency, energy storage capability, and device reliability still needs to be significantly improved to meet the requirements for practical applications. Rather than simply outlining and comparing different 3D nanostructures, this article systematically summarizes the general advantages as well as the existing and future challenges of 3D nanostructures for electrochemical energy conversion and storage, focusing on photoelectrochemical water splitting, photoelectrocatalytic solar‐to‐fuels conversion from nitrogen and carbon dioxide, rechargeable metal‐ion batteries, and supercapacitors. A comprehensive understanding of these advantages and challenges shall provide valuable guidelines and enlightenments to facilitate the further development of 3D nanostructured materials, and contribute to the achieving more efficient energy conversion and storage technologies toward a sustainable energy future.     

Photo‐Rechargeable Electric Energy Storage Systems

The global energy demand is increasing at the same time as fossil fuel resources are dwindling. Consequently, the search for alternative energy sources is a major topic worldwide. Solar energy is one of the most promising, effective and emission‐free energy sources. However, the energy has to be stored to compensate the fluctuating availability of the sun and the actual energy demand. Photo‐rechargeable electric energy storage systems may solve this problem by immediately storing the generated electricity. Different combinations of solar cells and storage devices are possible. High efficiencies can be achieved by the combination of dye‐sensitized solar cells (DSSC) and capacitors. However, other hybrid devices including DSSCs or organic photovoltaic systems and redox flow batteries, lithium ion batteries and metal air batteries are playing an increasing role in this research field. This Progress Report reviews the state of the art research of photo‐rechargeable batteries based on organic solar cells, as well as storage modules.