Localized High‐Concentration Electrolytes Boost Potassium Storage in High‐Loading Graphite

Reversible intercalation of potassium‐ion (K⁺) into graphite makes it a promising anode material for rechargeable potassium‐ion batteries (PIBs). However, the current graphite anodes in PIBs often suffer from poor cyclic stability with low coulombic efficiency. A stable solid electrolyte interphase (SEI) is necessary for stabilizing the large interlayer expansion during K⁺ insertion. Herein, a localized high‐concentration electrolyte (LHCE) is designed by adding a highly fluorinated ether into the concentrated potassium bis(fluorosulfonyl)imide/dimethoxyethane, which forms a durable SEI on the graphite surface and enables highly reversible K⁺ intercalation/deintercalation without solvent cointercalation. Furthermore, this LHCE shows a high ionic conductivity (13.6 mS cm^?1) and excellent oxidation stability up to 5.3 V (vs K⁺/K), which enables compatibility with high‐voltage cathodes. The kinetics study reveals that K⁺ intercalation/deintercalation does not follow the same pathway. The potassiated graphite exhibits excellent depotassiation rate capability, while the formation of a low stage intercalation compound is the rate‐limiting step during potassiation.     

MoS2 Nanosheets Vertically Aligned on Carbon Paper: A Freestanding Electrode for Highly Reversible Sodium‐Ion Batteries

The development of sodium‐ion batteries for large‐scale applications requires the synthesis of electrode materials with high capacity, high initial Coulombic efficiency (ICE), high rate performance, long cycle life, and low cost. A rational design of freestanding anode materials is reported for sodium‐ion batteries, consisting of molybdenum disulfide (MoS₂) nanosheets aligned vertically on carbon paper derived from paper towel. The hierarchical structure enables sufficient electrode/electrolyte interaction and fast electron transportation. Meanwhile, the unique architecture can minimize the excessive interface between carbon and electrolyte, enabling high ICE. The as‐prepared MoS₂@carbon paper composites as freestanding electrodes for sodium‐ion batteries can liberate the traditional electrode manufacturing procedure, thereby reducing the cost of sodium‐ion batteries. The freestanding MoS₂@carbon paper electrode exhibits a high reversible capacity, high ICE, good cycling performance, and excellent rate capability. By exploiting in situ Raman spectroscopy, the reversibility of the phase transition from 2H‐MoS₂ to 1T‐MoS₂ is observed during the sodium‐ion intercalation/deintercalation process. This work is expected to inspire the development of advanced electrode materials for high‐performance sodium‐ion batteries.     

Exploiting Lithium–Ether Co‐Intercalation in Graphite for High‐Power Lithium‐Ion Batteries

The intercalation of lithium ions into graphite electrode is the key underlying mechanism of modern lithium‐ion batteries. However, co‐intercalation of lithium‐ions and solvent into graphite is considered undesirable because it can trigger the exfoliation of graphene layers and destroy the graphite crystal, resulting in poor cycle life. Here, it is demonstrated that the [lithium–solvent]⁺ intercalation does not necessarily cause exfoliation of the graphite electrode and can be remarkably reversible with appropriate solvent selection. First‐principles calculations suggest that the chemical compatibility of the graphite host and [lithium–solvent]⁺ complex ion strongly affects the reversibility of the co‐intercalation, and comparative experiments confirm this phenomenon. Moreover, it is revealed that [lithium–ether]⁺ co‐intercalation of natural graphite electrode enables much higher power capability than normal lithium intercalation, without the risk of lithium metal plating, with retention of ≈87% of the theoretical capacity at current density of 1 A g^?1. This unusual high rate capability of the co‐intercalation is attributed to the (i) absence of the desolvation step, (ii) negligible formation of the solid–electrolyte interphase on graphite surface, and (iii) fast charge‐transfer kinetics. This work constitutes the first step toward the utilization of fast and reversible [lithium–solvent]⁺ complex ion intercalation chemistry in graphite for rechargeable battery technology.     

Mg Substitution Clarifies the Reaction Mechanism of Olivine LiFePO4

Understanding the reaction mechanism of olivine compounds as electrode materials for lithium lithium‐ion batteries have has received much attention recently. The question whether olivine LiFePO4 undergoes two‐phase or non‐nonequilibrium single‐phase reaction during electrochemical processes has taken center stage in the understanding of the faster reaction kinetics observed in this material. Here, the lithiation/delithiation mechanism of Mg Mg‐substituted LiFePO4 using high high‐resolution X‐ray diffraction(XRD), transmission electron microscopy(TEM), and electrochemical measurements is reported. Ex situ partially (de)lithiated olivine‐ LiMg0.2Fe0.8PO4 show the existence of stable equilibrium intermediate phases as characterized by the presence of more than two phases and broadness of diffraction peaks. Electron energy loss spectroscopy profiles across individual nanoparticles further confirm uniform lithiation with a constant Fe–L3 energy measured across each nanoparticle, suggestive of solid solution behavior in individual particles. In addition, a continuous shift in the diffraction peak position is observed even in the “two‐phase” region in the ex situ electrochemical (de)lithiated electrodes.     

A High‐Performance Composite Electrode for Vanadium Redox Flow Batteries

A composite electrode composed of reduced graphene oxide‐graphite felt (rGO‐GF) with excellent electrocatalytic redox reversibility toward V²⁺/V³⁺ and VO²⁺/VO₂⁺ redox couples in vanadium batteries was fabricated by a facile hydrothermal method. Compared with the pristine graphite felt (GF) electrode, the rGO‐GF composite electrode possesses abundant oxygen functional groups, high electron conductivity, and outstanding stability. Its corresponding energy efficiency and discharge capacity are significantly increased by 20% and 300%, respectively, at a high current density of 150 mA cm^?2. Moreover, a discharge capacity of 20 A h L^?1 is obtained with a higher voltage efficiency (74.5%) and energy efficiency (72.0%), even at a large current density of 200 mA cm^?2. The prepared rGO‐GF composite electrode holds great promise as a high‐performance electrode for vanadium redox flow battery (VRFB).     

A Hybrid Electrolytes Design for Capacity‐Equivalent Dual‐Graphite Battery with Superior Long‐Term Cycle Life

Based on cation/anion graphite intercalation chemistry (GIC) processes, dual‐graphite batteries promise to be an energy storage device of high safety and low cost. However, few single electrolyte systems can simultaneously meet the requirements of both high oxidative stability during high voltage anion‐GIC on cathode and high reversibility upon cation‐GIC on anode. Thus, in order to rigidly remedy the irreversible capacity loss, excessive electrode materials need to be fabricated within full cell, resulting in an imbalance toward capacity‐dependent mass loading proportion between both electrodes. This work introduces a hybrid (dual‐organic) electrolytes design strategy into this promising technology. Segregated by a Nafion‐based separator, an ionic liquid electrolyte within the cathodic side can endure high operation potentials, while high Li‐GIC reversibility can be achieved in a superconcentrated ether‐based electrolyte on the anode side. On a mechanistic level, various cation‐GIC processes conducted in different electrolyte systems are clearly revealed and are summarized based on systematical characterizations. More importantly, after synergistically tuning the advantage and drawback of each electrolyte in this hybrid system, the dual‐graphite full cell assembled with capacity‐equivalent graphite‐based electrodes (1:1 mass loading) demonstrates superior long‐term cycling stability with ultrahigh capacity retention for over 3000 cycles.     

Manganese Oxide/Carbon Aerogel Composite: an Outstanding Supercapacitor Electrode Material

Manganese oxide/carbon aerogel composite electrodes are prepared by a self‐limiting anodic‐electrochemical deposition of manganese oxide into a binder‐enriched carbon aerogel layer, drop‐cast on a graphite substrate, using 0.1 M Mn(CH₃COO)₂·4H₂O as the electrolyte. Manganese oxide grows in the form of thin nanofibers along the backbone of the carbon aerogel, leaving adequate working space for the electrolyte and enabling a fuller extent of the utilization of the manganese oxide to make the composite an outstanding supercapacitor electrode material. The manganese oxide is determined to be Mn₃O₄ with the Raman spectroscopy and high‐resolution transmission electron microscopy. The rectangularity of the cyclic‐voltammogram loops of the composite electrode is excellent and remains that way for scan rates up to a very‐high value of 500 mV s^?1, indicating extremely good redox reversibility and cycle efficiency. At a scan rate of 25 mV s^?1, the specific capacitance, as measured in 0.5 M Na₂SO₄ for a potential window of 0.1–0.9 V vs. Ag/AgCl, reaches a maximum value of 503 F g^?1 and experiences only a negligible decay of less than 1% at the 6000th cycle, implying an extraordinary cycling stability. The cycling efficiency is as high as 98% at a current density of 8 A g^?1 cm^?2, showing an almost‐ideal capacitive behavior. The power density reaches 48.5 kW kg^?1 and the energy density 21.6 W h kg^?1 at a scan rate of 500 mV s^?1, well above the specifications of current state‐of‐the‐art supercapacitors.     

Electrochemical behavior of caffeic acid at single-walled carbon nanotube:graphite-based electrode

The performance of a single-walled carbon nanotube:graphite-based electrode, prepared by mixing single-walled carbon nanotubes (SWCNTs) and graphite powder, is described. The resulting electrode shows an excellent behavior for the redox of caffeic acid (CA), an important biological molecule. Due to the existing resemblance between electrochemical and biological reactions, it can be assumed that the oxidation mechanisms on the electrode and in the body share similar principles. SWCNT:graphite-based electrode presents a significant decrease in the overvoltage for the CA oxidation as well as a dramatic improvement in the reversibility of the CA redox behavior in comparison with the graphite-based and glassy carbon (GC) electrodes.     

Multidimensional Ordered Bifunctional Air Electrode Enables Flash Reactants Shuttling for High‐Energy Flexible Zn‐Air Batteries

Direct growth of electrocatalysts on conductive substrates is an emerging strategy to prepare air electrodes for flexible Zn‐air batteries (FZABs). However, electrocatalysts grown on conductive substrates usually suffer from disorder and are densely packed with “prohibited zones”, in which internal blockages shut off the active sites from catalyzing the oxygen reaction. Herein, to minimize the “prohibited zones”, an ordered multidimensional array assembled by 1D carbon nanotubes and 2D carbon nanoridges decorated with 0D cobalt nanoparticles (referred as MPZ‐CC@CNT) is constructed on nickel foam. When the MPZ‐CC@CNT is directly applied as a self‐supported electrode for FZAB, it delivers a marginal voltage fading rate of 0.006 mV cycle^?1 over 1800 cycles (600 h) at a current density of 50 mA cm^?2 and an impressive energy density of 946 Wh kg^?1. Electrochemical impedance spectroscopy reveals that minimal internal resistance and electrochemical polarization, which is beneficial for the flash reactant shuttling among the triphase (i.e., oxygen, electrolyte, and catalyst) are offered by the open and ordered architecture. This advanced electrode design provides great potential to boost the electrochemical performance of other rechargeable battery systems.     

Operando Observations of SEI Film Evolution by Mass‐Sensitive Scanning Transmission Electron Microscopy

The solid electrolyte interphase (SEI) spontaneously formed on anode surfaces as a passivation layer plays a critical role in the lithium dissolution and deposition upon discharge/charge in lithium ion batteries and lithium‐metal batteries. The formation kinetics and failure of the SEI films are the key factors determining the safety, power capability, and cycle life of lithium ion and lithium‐metal batteries. Since SEI films evolve with the volumetric and interfacial changes of anodes, it is technically challenging in experimental study of SEI kinetics. Here operando observations are reported of SEI formation, growth, and failure at a high current density by utilizing a mass‐sensitive Cs‐corrected scanning transmission electron microscopy. The sub‐nano‐scale observations reveal a bilayer hybrid structure of SEI films and demonstrate the radical assisted SEI growth after the SEI thickness beyond the electron tunneling regime. The failure of SEI films is associated with rapid dissolution of inorganic layers when they directly contact with the electrolyte in broken SEI films. The initiation of cracks in SEI films is caused by heterogeneous volume changes of the electrodes during delithiation. These microscopic insights have important implications in understanding SEI kinetics and in developing high‐performance anodes with the formation of robust SEI films.     

Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode

Artificial solid‐electrolyte interphase (SEI) is one of the key approaches in addressing the low reversibility and dendritic growth problems of lithium metal anode, yet its current effect is still insufficient due to insufficient stability. Here, a new principle of “simultaneous high ionic conductivity and homogeneity” is proposed for stabilizing SEI and lithium metal anodes. Fabricated by a facile, environmentally friendly, and low‐cost lithium solid‐sulfur vapor reaction at elevated temperature, a designed lithium sulfide protective layer successfully maintains its protection function during cycling, which is confirmed by both simulations and experiments. Stable dendrite‐free cycling of lithium metal anode is realized even at a high areal capacity of 5 mAh cm^?2, and prototype Li–Li₄Ti₅O₁₂ cell with limited lithium also achieves 900 stable cycles. These findings give new insight into the ideal SEI composition and structure and provide new design strategies for stable lithium metal batteries.     

Fluorinated End‐Groups in Electrolytes Induce Ordered Electrolyte/Anode Interface Even at Open‐Circuit Potential as Revealed by Sum Frequency Generation Vibrational Spectroscopy

Fluorine‐based additives have a tremendously beneficial effect on the performance of lithium‐ion batteries, yet the origin of this phenomenon is unclear. This paper shows that the formation of a solid‐electrolyte interphase (SEI) on the anode surface in the first five charge/discharge cycles is affected by the stereochemistry of the electrolyte molecules on the anode surface starting at open‐circuit potential (OCP). This study shows an anode‐specific model system, the reduction of 1,2‐diethoxy ethane with lithium bis(trifluoromethane)sulfonimide, as a salt on an amorphous silicon anode, and compares the electrochemical response and SEI formation to its fluorinated version, bis(2,2,2‐trifluoroethoxy) ethane (BTFEOE), by sum frequency generation (SFG) vibrational spectroscopy under reaction conditions. The SFG results suggest that the ? CF₃ end‐groups of the linear ether BTFEOE change their adsorption orientation on the a‐Si surface at OCP, leading to a better protective layer. Supporting evidence from ex situ scanning electron microscopy and X‐ray photoelectron spectroscopy depth profiling measurements shows that the fluorinated ether, BTFEOE, yields a smooth SEI on the a‐Si surface and enables lithium ions to intercalate deeper into the a‐Si bulk.     

Recent Developments on and Prospects for Electrode Materials with Hierarchical Structures for Lithium‐Ion Batteries

Since their successful commercialization in 1990s, lithium‐ion batteries (LIBs) have been widely applied in portable digital products. The energy density and power density of LIBs are inadequate, however, to satisfy the continuous growth in demand. Considering the cost distribution in battery system, it is essential to explore cathode/anode materials with excellent rate capability and long cycle life. Nanometer‐sized electrode materials could quickly take up and store numerous Li⁺ ions, afforded by short diffusion channels and large surface area. Unfortunately, low thermodynamic stability of nanoparticles results in electrochemical agglomeration and raises the risk of side reactions on electrolyte. Thus, micro/nano and hetero/hierarchical structures, characterized by ordered assembly of different sizes, phases, and/or pores, have been developed, which enable us to effectively improve the utilization, reaction kinetics, and structural stability of electrode materials. This review summarizes the recent efforts on electrode materials with hierarchical structures, and discusses the effects of hierarchical structures on electrochemical performance in detail. Multidimensional self‐assembled structures can achieve integration of the advantages of materials with different sizes. Core/yolk–shell structures provide synergistic effects between the shell and the core/yolk. Porous structures with macro‐, meso‐, and micropores can accommodate volume expansion and facilitate electrolyte infiltration.     

An In Situ Interface Reinforcement Strategy Achieving Long Cycle Performance of Dual‐Ion Batteries

Dual‐ion batteries (DIBs) with high operation voltage offer promising candidates for low‐cost clean energy chemistries. However, there still exist tough issues, including structural collapse of the graphite cathode due to solvent co‐intercalation and electrolyte decomposition on the electrode/electrolyte interface, which results in unsatisfactory cyclability and fast battery failure. Herein, Li₄Ti₅O₁₂ (LTO) modified mesocarbon microbeads (MCMBs) are proposed as a cathode material. The LTO layer functions as a skeleton and offers electrocatalytic active sites for in situ generation of a favorable and compatible cathode electrolyte interface (CEI) layer. The synergetic LTO‐CEI network can change the thermodynamic behavior of the PF₆^? intercalation process and maintain the structural integrity of the graphite cathode, as a “Great Wall” to protect the cathode from structural collapse and electrolyte decomposition. Such LTO‐CEI reinforced cathode exhibits a prolonged cyclability with 85.1% capacity retention after 2000 cycles even at cut‐off potential of 5.4 V versus Li⁺/Li. Moreover, the LTO‐modified MCMB (+)//prelithiated MCMB (?) full cell exhibits a high energy density of ≈200 Wh kg^?1, remarkably enhanced cyclability with 93.5% capacity retention after 1000 cycles. Undoubtedly, this work offers in‐depth insight into interface chemistry, which can arouse new originality to boost the development of DIBs.     

A High Energy Density Aqueous Battery Achieved by Dual Dissolution/Deposition Reactions Separated in Acid‐Alkaline Electrolyte

Aqueous batteries are facing big challenges in the context of low working voltages and energy density, which are dictated by the narrow electrochemical window of aqueous electrolytes and low specific capacities of traditional intercalation‐type electrodes, even though they usually represent high safety, low cost, and simple maintenance. For the first time, this work demonstrates a record high‐energy‐density (1503 Wh kg^?1 calculated from the cathode active material) aqueous battery system that derives from a novel electrolyte design to expand the electrochemical window of electrolyte to 3 V and two high‐specific‐capacity electrode reactions. An acid‐alkaline dual electrolyte separated by an ion‐selective membrane enables two dissolution/deposition electrode redox reactions of MnO₂/Mn²⁺ and Zn/Zn(OH)₄^2? with theoretical specific capacities of 616 and 820 mAh g^?1, respectively. The newly proposed Zn–Mn²⁺ aqueous battery shows a high Coulombic efficiency of 98.4% and cycling stability of 97.5% of discharge capacity retention for 1500 cycles. Furthermore, in the flow battery based on Zn–Mn²⁺ pairs, more excellent stability of 99.5% of discharge capacity retention for 6000 cycles is achieved due to greatly improved reversibility of the Zn anode. This work provides a new path for the development of novel aqueous batteries with high voltage and energy density.     

Manipulating Adsorption–Insertion Mechanisms in Nanostructured Carbon Materials for High‐Efficiency Sodium Ion Storage

Hard carbon is one of the most promising anode materials for sodium‐ion batteries, but the low Coulombic efficiency is still a key barrier. In this paper, a series of nanostructured hard carbon materials with controlled architectures is synthesized. Using a combination of in situ X‐ray diffraction mapping, ex situ nuclear magnetic resonance (NMR), electron paramagnetic resonance, electrochemical techniques, and simulations, an “adsorption–intercalation” mechanism is established for Na ion storage. During the initial stages of Na insertion, Na ions adsorb on the defect sites of hard carbon with a wide adsorption energy distribution, producing a sloping voltage profile. In the second stage, Na ions intercalate into graphitic layers with suitable spacing to form NaC _x compounds similar to the Li ion intercalation process in graphite, producing a flat low voltage plateau. The cation intercalation with a flat voltage plateau should be enhanced and the sloping region should be avoided. Guided by this knowledge, nonporous hard carbon material has been developed which has achieved high reversible capacity and Coulombic efficiency to fulfill practical application.     

Direct and indirect electron transfer between electrodes and redox proteins

The direct electrochemistry of redox proteins has been achieved at a variety of electrodes, including modified gold, pyrolytic graphite and metal oxides. Careful design of electrode surfaces and electrolyte conditions are required for the attainment of rapid and reversible protein-electrode interaction. The electron transfer reactions of more complex systems, such as redox enzymes, are now being examined. The 'well-behaved' electrochemistry of redox proteins can be usefully exploited by coupling the electrode reaction to enzymes for which the redox proteins act as cofactors. In systems where direct electron transfer is very slow, small electron carriers, or mediators, may be employed to enhance the rate of electron exchange with the electrode. The organometallic compound ferrocene and its derivatives have proved particularly effective in this role. A new generation of electrochemical biosensors employs ferrocene derivatives as mediators.     

A novel enzymatic hydrogen peroxide biosensor based on Ag/C nanocables

A novel enzymatic hydrogen peroxide sensor was successfully fabricated based on the nanocomposites containing of Ag/C nanocables and gold nanoparticles (AuNPs). Ag/C nanocables have been synthesized by a hydrothermal method and then AuNPs were assembled on the surface of Ag/C nanocables. The nanocomposites were confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). The above nanocomposites have satisfactory chemical stability and excellent biocompatibility. Cyclic voltammetry (CV) was used to evaluate the electrochemical performance of the Ag/C/Au nanocomposites at glassy carbon electrode (GCE). The results indicated that the Ag/C/Au nanocomposites exhibited excellent electrocatalytic activity to the reduction of H(2)O(2). It offered a linear range of 6.7×10(-9) to 8.0×10(-6) M, with a detection limit of 2.2×10(-9) M. The apparent Michaelis-Menten constant of the biosensor was 51.7×10(-6) M. These results indicated that Ag/C/Au nanocomposites have potential for constructing of a variety of electrochemical biosensors.     

Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A Review

There are growing concerns over the environmental, climate, and health impacts caused by using non‐renewable fossil fuels. The utilization of green energy, including solar and wind power, is believed to be one of the most promising alternatives to support more sustainable economic growth. In this regard, lithium‐ion batteries (LIBs) can play a critically important role. To further increase the energy and power densities of LIBs, silicon anodes have been intensively explored due to their high capacity, low operation potential, environmental friendliness, and high abundance. The main challenges for the practical implementation of silicon anodes, however, are the huge volume variation during lithiation and delithiation processes and the unstable solid‐electrolyte interphase (SEI) films. Recently, significant breakthroughs have been achieved utilizing advanced nanotechnologies in terms of increasing cycle life and enhancing charging rate performance due partially to the excellent mechanical properties of nanomaterials, high surface area, and fast lithium and electron transportation. Here, the most recent advance in the applications of 0D (nanoparticles), 1D (nanowires and nanotubes), and 2D (thin film) silicon nanomaterials in LIBs are summarized. The synthetic routes and electrochemical performance of these Si nanomaterials, and the underlying reaction mechanisms are systematically described.     

Pristine or Highly Defective? Understanding the Role of Graphene Structure for Stable Lithium Metal Plating

The role of graphene host structure/chemistry in plating–stripping in lithium metal anodes employed for lithium metal batteries is first examined in this study. Structural and chemical defects are bad, since highly defective graphene promotes unstable solid electrolyte interphase (SEI) growth. This consumes the fluoroethylene carbonate (FEC) additive in the carbonate electrolyte and is correlated with rapid decay in Coulombic efficiency (CE) and formation of filament‐like Li dendrites. A unique flow‐aided sonication exfoliation method is employed to synthesize “defect‐free” graphene (df‐G), allowing for a direct performance comparison with conventional reduced graphene oxide (r‐GO). At cycle 1, the r‐GO is better electrochemically wetted by Li than df‐G, indicating that initially it is more lithiophilic. With cycling, the nucleation overpotential with r‐GO becomes higher than with df‐G, indicating less facile plating reactions. The df‐G yields state‐of‐the‐art electrochemical performance, with the post cycled metal surface being relatively smooth and dendrite‐free. Conversely, r‐GO templates have CE rapidly degrade from the onset, with extensive dendrites after cycling. Severe SEI growth and associated FEC depletion with r‐GO are further confirmed by electrochemical impedance analysis and surface science methods. A new design rule is provided for Li metal templates: An ideal host must be noncatalytic toward SEI formation.