Surface‐Plasmon Assisted Energy Conversion in Dye‐Sensitized Solar Cells

In this study, the effect of plasmonic core‐shell structures, consisting of dielectric cores and metallic nanoshells, on energy conversion in dye‐sensitized solar cells (DSSCs) is investigated. The structure of the core‐shell particles is controlled to couple with visible light so that the visible component of the solar spectrum is amplified near the core‐shell particles. In core‐shell particle – TiO₂ nanoparticle films, the local field intensity and light pathways are increased due to the surface plasmons and light scattering. This, in turn, enlarges the optical cross‐section of dye sensitizers coated onto the mixed films. When 22 vol% of core‐shell particles are added to a 5 μm thick TiO₂ film, the energy conversion efficiency of DSSCs increases from 2.7% to 4.0%, in spite of a more than 20% decrease in the amount of dyes adsorbed on the composite films. The correlation between core‐shell particle content and energy conversion efficiency in DSSCs is explained by the balance among near‐field effects, light scattering efficiency, and surface area in the composite films.     

Atomic Layer Deposition of Highly Transparent Platinum Counter Electrodes for Metal/Polymer Flexible Dye‐Sensitized Solar Cells

Atomic layer deposition (ALD) is used to deposit Pt nanoparticles at low temperature (25–150 °C) to fabricate highly transparent counter electrodes (CEs) for flexible dye‐sensitized solar cells (DSCs). The Pt nanoparticles (NPs) are deposited for different number of ALD cycles on indium tin oxide (ITO)/polyethylene naphthalate (PEN) substrates. Rutherford backscattering spectroscopy (RBS) and transmission electron microscopy (TEM) are used to assess the Pt NP loading, density, and size. There is a trade‐off between transparency and catalytic activity of the CE, and the best cell performances of back‐side‐illuminated DSCs (≈3.7% efficiency) are achieved for Pt ALD at temperatures in the range of 100–150 °C, even though deposition at 25 °C is also viable. The best cell produced with ALD platinized CE (100 cycles at 100 °C) outperforms the reference cells fabricated with electrodeposited and sputtered Pt CEs, with relative improvements in efficiency of 19% and 29%, respectively. In addition, these parameters are used to fabricate a large area CE for a sub‐module (active area of 17.6 cm²), resulting in an efficiency of 3.1%, which demonstrates the scalability of the process.     

High‐Performance,Transparent, Dye‐Sensitized Solar Cells for See‐Through Photovoltaic Windows

Dye‐sensitized solar cells (DSCs) have attracted great interest as one of the most promising photovoltaic technologies, and transparent DSCs show potential applications as photovoltaic windows. However, the competition between light absorption for photocurrent generation and light transmittance for obtaining high transparency limits the performance of transparent DSCs. Here, transparent DSCs exhibiting a high light transmittance of 60.3% and high energy conversion efficiency (3.66%) are reported. The strategy is to create a cocktail system composed of ultraviolet and near‐infrared dye sensitizers that selectively and efficiently harvest light in the invisible or low‐eye‐sensitivity region while transmitting light in high‐eye‐sensitivity regions. This new design provides a reasonable approach for realizing high efficiency and transparency DSCs that have potential applications as photovoltaic windows.     

Development of Next‐Generation Organic‐Based Solar Cells: Studies on Dye‐Sensitized and Perovskite Solar Cells

Next‐generation organic solar cells such as dye‐sensitized solar cells (DSSCs) and perovskite solar cells (PSCs) are studied at the National Institute of Advanced Industrial Science and Technology (AIST), and their materials, electronic properties, and fabrication processes are investigated. To enhance the performance of DSSCs, the basic structure of an electron donor, π‐electron linker, and electron acceptor, i.e., D–π–A, is suggested. In addition, special organic dyes containing coumarin, carbazole, and triphenylamine electron donor groups are synthesized to find an effective dye structure that avoids charge recombination at electrode surfaces. Meanwhile, PSCs are manufactured using both a coating method and a laser deposition technique. The results of interfacial studies demonstrate that the level of the conduction band edge (CBE) of a compact TiO₂ layer is shifted after TiCl₄ treatment, which strongly affects the solar cell performance. Furthermore, a special laser deposition system is developed for the fabrication of the perovskite layers of PSCs, which facilitates the control over the deposition rate of methyl ammonium iodide used as their precursor.     

Dominating Energy Losses in NiO p‐Type Dye‐Sensitized Solar Cells

Nickel oxide based p‐type dye‐sensitized solar cells (DSCs) are limited in their efficiencies by poor fill factors (FFs). This work explores the origins of this limitation. Transient absorption spectroscopy identifies fast recombination between the injected hole and the dye anion under applied load as one of the predominant reasons for the poor FF of NiO‐based DSCs. A reduced hole injection efficiency, η_INJ, under applied load is found to play an equally important role. Both, the dye regeneration yield, Φ_REG, and η_INJ decrease by approximately 40%–50% when moving from short‐ to open‐circuit conditions. Spectroelectrochemical measurements reveal that the electrochromic properties of NiO are a further limiting factor for the device performance leading to variable light‐harvesting efficiencies, η_LH, under applied load. The peak light‐harvesting efficiency decreases from 63% at short circuit to 57% at 600 mV reducing the FF of NiO DSCs by 5%. This effect is expected to be more pronounced for future devices with higher operating voltages. Incident, photon‐to‐electron conversion efficiency front–back analysis at applied bias is utilized to characterize the interfacial charge recombination. It is found that the recombination between the injected hole and the redox mediator has a surprisingly small effect on the FF.     

Mesh‐Shaped Nanopatterning of Pt Counter Electrodes for Dye‐Sensitized Solar Cells with Enhanced Light Harvesting

A facile process to produce large‐area platinum (Pt) counter electrode platforms with well‐arrayed, mesh‐shaped nanopatterns using commercially available TiO₂ paste and poly(dimethyl siloxane) (PDMS) nanostamps is presented. The process involves mesh‐shaped (200 nm × 200 nm) nanopatterning of a TiO₂ scaffold onto a fluorine‐doped tin oxide (FTO) substrate, followed by Pt sputtering. The structure and morphology of the counter electrodes are characterized by a field emission scanning electron microscope (FE‐SEM) and an atomic force microscope (AFM). Solid‐state dye‐sensitized solar cells (ssDSSCs) fabricated with these mesh‐shaped Pt counter electrodes showed an efficiency of 7.0%. This is one of the highest efficiencies observed for N719 dye and is much higher than that of devices with non‐patterned, thermally deposited electrodes (5.4%) or non‐patterned, sputtering deposited electrodes (5.7%). This improvement is attributed to enhanced light harvesting and a greater surface area and has been confirmed by incident photon‐to current efficiency (IPCE), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) measurements.     

Recent Progress in Dye‐Sensitized Solar Cells Using Nanocrystallite Aggregates

Nanocrystallite aggregates are spherical assemblies of nanometer‐sized crystallites and feature a size on the order of sub‐micrometers. This paper reports and summarizes recent progress in nanocrystallite aggregates for applications in dye‐sensitized solar cells. It emphasizes that nanocrystallite aggregates are a promising class of materials with the capability to generate light scattering, enhance electron transport, retain high specific surface area for dye adsorption, and facilitate electrolyte diffusion while serving as the photoelectrode film of a dye‐sensitized solar cell. In the Perspectives section, it is suggested that optimization of the porosity of the aggregates, the facets of nanocrystallites forming the aggregates, and the structure of photoelectrode film could possibly lead to breakthroughs in improving the power conversion efficiency of the current state‐of‐the‐art dye‐sensitized solar cells.     

Rational Design of Metal Oxide–Based Cathodes for Efficient Dye‐Sensitized Solar Cells

Recently, there is an urgent need for alternative energy resources due to the nonrenewable nature of fossil fuels and increasing CO₂ greenhouse gas emissions. The photovoltaic technologies which directly utilize the abundant and sustainable solar energy are critical. Among various photovoltaic devices (solar cells), dye‐sensitized solar cells (DSSCs) have gained increasing attention due to their high efficiency and easy fabrication process in the past decade. The cathode is a critical part in DSSCs while the benchmark Pt cathode suffers from high cost and scarcity. Thus, the development of alternative Pt‐free cathodes has attracted significant attention with the aim to heighten the cost competitiveness of DSSCs. Among various cathodes, metal oxides are of growing interest due to their superior activity, robust stability, and low cost. Simple oxides such as WO₃ and SnO₂ are used as cathodes for DSSCs. Considering the fixed atomic environment in simple oxides, complex oxides are more attractive as cathodes because of their more flexible physical and chemical properties. This review attempts to present the rational design of simple/complex metal oxide–based cathodes in DSSCs and then to provide useful guidance for the future design of Pt‐free cathodes. The demonstrated design strategies can be extended to other electrocatalysis‐based applications.     

Porphyrin Sensitizers with Donor Structural Engineering for Superior Performance Dye‐Sensitized Solar Cells and Tandem Solar Cells for Water Splitting Applications

Zn(II)–porphyrin sensitizers, coded as SGT‐020 and SGT‐021 , are designed and synthesized through donor structural engineering. The photovoltaic (PV) performances of SGT sensitizer‐based dye‐sensitized solar cells (DSSCs) are systematically evaluated in a thorough SM315 as a reference sensitizer. The effect of the donor ability and the donor bulkiness on photovoltaic performances is investigated for establishing the structure–performance relationship in the platform of porphyrin‐triple bond‐benzothiadiazole‐acceptor sensitizers. By introducing a more bulky fluorene unit to the amine group in the SM315 , the power conversion efficiency (PCE) is enhanced with the increased short‐circuit current (J_sc) and open‐circuit voltage (V_oc), due to the improved light‐harvesting ability and the efficient prevention of charge recombination, respectively. As a consequence, a maximum PCE of 12.11% is obtained for SGT‐021 , whose PCE is much higher than the 11.70% PCE for SM315 . To further improve their maximum efficiency, the first parallel tandem DSSCs employing cobalt electrolyte in the top and bottom cells are demonstrated and an extremely high efficiency of 14% is achieved, which is currently the highest reported value for tandem DSSCs. The series tandem DSSCs give a remarkably high V_oc value of >1.83 V. From this DSSC tandem configuration, 7.4% applied bias photon‐to‐current efficiency is achieved for solar water splitting.     

Titanium Dioxide Mesoporous Electrodes for Solid‐State Dye‐Sensitized Solar Cells: Cross‐Analysis of the Critical Parameters

We report a comparative study on the use of four different mesoporous titanium dioxide (TiO₂) photo‐electrodes for the fabrication of solid‐state dye‐sensitized solar cells (sDSSCs). The photovoltaic parameters of the device correlate with several intrinsic properties of the film, based not only on its morphological features, as commonly considered in standard characterizations, but also on the transport and the electronic properties of the photo‐electrode. These properties differ significantly for TiO₂ electrodes processed using different colloidal pastes, and are decisive for the photovoltaic efficiency, ranging from 3.7% up to 5.1%. In particular, the dielectric permittivity of each mesoporous layer (ε_eff) and the number of traps (N_t) determined by the space‐charge‐limited current (SCLC) theory are found to be a bottle‐neck for the charge transport, greatly influencing the fill factor (FF) and open circuit voltage (V_oc) of the cells. In addition, a direct correlation between TiO₂ surface potential with the V_oc was established. Cross‐analysis of key macroscopic parameters of the films prior to integration in the devices, in particular focusing on the determination of the capacitance and surface potential shift of the TiO₂ mesoporous anode, represents a straightforward yet powerful method to screen and select the most suitable TiO₂ for applications in sDSSCs.     

Surface State‐Mediated Charge Transfer of Cs2SnI6 and Its Application in Dye‐Sensitized Solar Cells

A vacancy‐ordered double perovskite, Cs₂SnI₆, has emerged as a promising lead‐free perovskite in the optoelectronic field. However, the charge transfer kinetics mediated by its surface state remains unclear. Here, the charge transfer mechanism of Cs₂SnI₆ is reported and the role of its surface state in the presence of a redox mediator is clarified. Specifically, charge transfer through the surface state of Cs₂SnI₆ and its subsequent surface state charging are demonstrated by cyclic voltammetry and Mott–Schottky measurements, respectively. Because it is expected that the surface state of Cs₂SnI₆ is capable of regenerating oxidized organic dyes, a Cs₂SnI₆‐based regenerator is developed for a dye‐sensitized solar cell composed of fluorine‐doped tin oxide (FTO)/dyed mesoporous TiO₂/regenerator/poly(3,4‐ethylenedioxythiophene)/FTO. As expected, the performance of the Cs₂SnI₆‐based regenerator is strongly dependent on the highest occupied molecular orbital of the dyes. Consequently, Cs₂SnI₆ shows efficient charge transfer with a thermodynamically favorable charge acceptor level, achieving a 79% enhancement in the photocurrent density (14.1 mA cm^?2) compared with that of a conventional liquid electrolyte (7.9 mA cm^?2). The results suggest that the surface state of Cs₂SnI₆ is the main charge transfer pathway in the presence of a redox mediator and should be considered in future designs of Cs₂SnI₆‐based devices.     

Indolizine‐Based Donors as Organic Sensitizer Components for Dye‐Sensitized Solar Cells

Strong electron‐donating functionality is desirable for many organic donor‐π‐bridge‐acceptor (D‐π‐A) dyes. Strategies for increasing the electron‐donating strength of common nitrogen‐based donors include planarization of nitrogen substituents and the use of low resonance‐stabilized energy aromatic ring‐substituted nitrogen atoms. Organic donor motifs based on the planar nitrogen containing heterocycle indolizine are synthesized and incorporated into dye‐sensitized solar cell (DSC) sensitizers. Resonance active substitutions at several positions on indolizine in conjugation with the D‐π‐A π‐system are examined computationally and experimentally. The indolizine‐based donors are observed to contribute electron density with strengths greater than triarylamines and diarylamines, as evidenced by UV/Vis, IR absorptions, and oxidation potential measurements. Fluorescence lifetime studies in solution and on TiO₂ yield insights in understanding the performance of indolizine‐based dyes in DSC devices.     

TiO2 Nanocrystals Synthesized by Laser Pyrolysis for the Up‐Scaling of Efficient Solid‐State Dye‐Sensitized Solar Cells

A crucial issue regarding emerging nanotechnologies remains the up‐scaling of new functional nanostructured materials towards their implementation in high performance applications on a large scale. In this context, we demonstrate high efficiency solid‐state dye‐sensitized solar cells prepared from new porous TiO₂ photoanodes based on laser pyrolysis nanocrystals. This strategy exploits a reduced number of processing steps as well as non‐toxic chemical compounds to demonstrate highly porous TiO₂ films. The possibility to easily tune the TiO₂ nanocrystal physical properties allows us to demonstrate all solid‐state dye‐sensitized devices based on a commercial benchmark materials (organic indoline dye and molecular hole transporter) presenting state‐of‐the‐art performance comparable with reference devices based on a commercial TiO₂ paste. In particular, a drastic improvement in pore infiltration, which is found to balance a relatively lower surface area compared to the reference electrode, is evidenced using laser‐synthesized nanocrystals resulting in an improved short‐circuit current density under full sunlight. Transient photovoltage decay measurements suggest that charge recombination kinetics still limit device performance. However, the proposed strategy emphasizes the potentialities of the laser pyrolysis technique for up‐scaling nanoporous TiO₂ electrodes for various applications, especially for solar energy conversion.