Efficient Solar Cells Based on Light‐Harvesting Antimony Sulfoiodide

Although antimony sulfoiodide (SbSI) exhibits very interesting properties including high photoconductivity, ferroelectricity, and piezoelectricity, it is not applied to solar cells. Meanwhile, SbSI is predominantly prepared as a powder using a high‐temperature, high‐pressure system. Herein, the fabrication of solar cells utilizing SbSI as light harvesters is reported for the first time to the best of knowledge. SbSI is prepared by solution processing, followed by annealing under mild temperature conditions by a reaction between antimony trisulfide, which is deposited by chemical bath deposition on a mesoporous TiO₂ electrode and antimony triiodide, under air at a low temperature (90 °C) without any external pressure. The solar cells fabricated using SbSI exhibit a power conversion efficiency of 3.05% under standard illumination conditions of 100 mW cm^?2.     

Hybrid Perovskite‐Organic Flexible Tandem Solar Cell Enabling Highly Efficient Electrocatalysis Overall Water Splitting

Perovskite‐organic tandem solar cells are attracting more attention due to their potential for highly efficient and flexible photovoltaic device. In this work, efficient perovskite‐organic monolithic tandem solar cells integrating the wide bandgap perovskite (1.74 eV) and low bandgap organic active PBDB‐T:SN6IC‐4F (1.30 eV) layer, which serve as the top and bottom subcell, respectively, are developed. The resulting perovskite‐organic tandem solar cells with passivated wide‐bandgap perovskite show a remarkable power conversion efficiency (PCE) of 15.13%, with an open‐circuit voltage (V_oc) of 1.85 V, a short‐circuit photocurrent (J_sc) of 11.52 mA cm^?2, and a fill factor (FF) of 70.98%. Thanks to the advantages of low temperature fabrication processes and the flexibility properties of the device, a flexible tandem solar cell which obtain a PCE of 13.61%, with V_oc of 1.80 V, J_sc of 11.07 mA cm^?2, and FF of 68.31% is fabricated. Moreover, to demonstrate the achieved high V_oc in the tandem solar cells for potential applications, a photovoltaic (PV)‐driven electrolysis system combing the tandem solar cell and water splitting electrocatalysis is assembled. The integrated device demonstrates a solar‐to‐hydrogen efficiency of 12.30% and 11.21% for rigid, and flexible perovskite‐organic tandem solar cell based PV‐driven electrolysis systems, respectively.     

Organic Gelators as Growth Control Agents for Stable and Reproducible Hybrid Perovskite‐Based Solar Cells

Low‐molecular‐weight organic gelators are widely used to influence the solidification of polymers, with applications ranging from packaging items, food containers to organic electronic devices, including organic photovoltaics. Here, this concept is extended to hybrid halide perovskite‐based materials. In situ time‐resolved grazing incidence wide‐angle X‐ray scattering measurements performed during spin coating reveal that organic gelators beneficially influence the nucleation and growth of the perovskite precursor phase. This can be exploited for the fabrication of planar n‐i‐p heterojunction devices with MAPbI₃ (MA = CH₃NH₃⁺) that display a performance that not only is enhanced by ≈ 25% compared to solar cells where the active layer is produced without the use of a gelator but that also features a higher stability to moisture and a reduced hysteresis. Most importantly, the presented approach is straightforward and simple, and it provides a general method to render the film formation of hybrid perovskites more reliable and robust, analogous to the control that is afforded by these additives in the processing of commodity “plastics.”     

Molecular Interlayers in Hybrid Perovskite Solar Cells

Organic–inorganic hybrid perovskite solar cells (PSC) are promising third‐generation solar cells. They exhibit good power conversion efficiencies and in principle they can be fabricated with lower energy consumption than many more established technologies. To improve the efficiency and long‐term stability of PSC, organic molecules are frequently used as “interlayers.” Interlayers are thin layers or monolayers of organic molecules that modify a specific interface in the solar cell. Here, the latest progress in the use of interlayers to optimize the performance of PSC is reviewed. Where appropriate interesting examples from the field of organic photovoltaics (OPV) are also presented as there are many similarities in the types of interlayers that are used in PSC and OPV. The review is organized into three parts. The first part focuses on why organic molecule interlayers improve the performance of the solar cells. The second section discusses commonly used molecular interlayers. In the last part, different approaches to make thin and uniform interlayers are discussed.     

Emerging 2D Layered Materials for Perovskite Solar Cells

Perovskite solar cells (PSCs) are now at the forefront of the state‐of‐the‐art photovoltaic technologies due to their high efficiency and low fabrication costs. To further realize the potential of this fascinating class of solar cells, nanostructured functional materials have been playing important roles. 2D layered materials have attracted a great deal of interest due to their fascinating properties and unique structure. Recently, the exploration of a wide range of novel 2D materials for use in PSCs has seen considerable progress, but still a lot remains to be done in this field. In this progress report, the advancements that have recently been made in the application of these emerging 2D materials, beyond graphene, for PSCs are presented. Both the advantages and challenges of these 2D materials for PSCs are highlighted. Finally, important directions for the future advancements toward efficient, low‐cost, and stable PSCs are outlined.     

Scaling Up ITO‐Free Solar Cells

Indium‐tin‐oxide‐free (ITO‐free) polymer solar cells with composite electrodes containing current‐collecting grids and a semitransparent poly(3,4‐ethylenedioxythiophene):polystyrenesulfonate) (PEDOT:PSS) conductor are demonstrated. The up‐scaling of the length of the solar cell from 1 to 6 cm and the effect of the grid line resistance are explored for a series of devices. Laser‐beam‐induced current (LBIC) mapping is used for quality control of the devices. A theoretical modeling study is presented that enables the identification of the most rational cell dimension for the grids with different resistances. The performance of ITO‐free organic solar cells with different dimensions and different electrode resistances are evaluated for different light intensities. The current generation and electric potential distribution are found to not be uniformly distributed in large‐area devices at simulated 1 Sun illumination. The generated current uniformity increases with decreasing light intensities.     

Current Collecting Grids for ITO‐Free Solar Cells

Indium‐tin‐oxide (ITO) free polymer solar cells prepared by ink jet printing a composite front electrode comprising silver grid lines and a semitransparent PEDOT:PSS conductor are demonstrated. The effect of grid line density is explored for a large series of devices and a careful modeling study enabling the identification of the most rational grid structure is presented. Both optical and light beam induced current (LBIC) mapping of the devices are used to support the power loss model and to follow the evolution of the performance over time. Current generation is found to be evenly distributed over the active area initially progressing to a larger graduation in areas with different performance. Over time coating defects also become much more apparent in the LBIC images.     

Molecular Design of Interfacial Modifiers for Polymer‐Inorganic Hybrid Solar Cells

The heterojunction of poly(3‐hexylthiophene) (P3HT) and TiO₂ in hybrid solar cells is systematically engineered with four cyanoacrylic acid‐containing conjugated molecules with various lowest unoccupied molecular orbital (LUMO) levels, WL‐1 to WL‐4, which are prepared by the formylation of thiophene derivatives in a Vilsmeier–Haack reaction, followed by treatment with cyanoacetic acid. The optical characteristics, redox properties, and intrinsic dipole moments of these interfacial modifiers (IMs) are examined using UV‐vis spectrophotometry, cyclic voltammetry, and density functional theory calculations. Using cyanoacrylic acid as a terminal anchoring group in IMs increases the electron affinity in regions close to the titania surface and forms a molecular dipole that is orientated away from the TiO₂ surface, enabling both open‐circuit voltage (V_OC) and short‐circuit current density to be increased simultaneously. Photovoltaic measurements demonstrate that V_OC increases with the dipole moment of IMs along the molecular backbone. Moreover, the external quantum efficiency (EQE) spectra display a bimodal distribution, revealing that both IMs and P3HT contribute to the photocurrent. The EQE at 570 nm is identified as characteristic of P3HT. More importantly, the LUMO of the IMs decisively determines the dissociation efficiency of P3HT excitons. The device based on P3HT/WL‐4/TiO₂ exhibits the highest power conversion efficiency of 2.87%.     

Development of Dopant‐Free Organic Hole Transporting Materials for Perovskite Solar Cells

There has been considerable progress over the last decade in development of the perovskite solar cells (PSCs), with reported performances now surpassing 25.2% power conversion efficiency. Both long‐term stability and component costs of PSCs remain to be addressed by the research community, using hole transporting materials (HTMs) such as 2,2′,7,7′‐tetrakis(N,N′‐di‐pmethoxyphenylamino)‐9,9′‐spirbiuorene(Spiro‐OMeTAD) and poly[bis(4‐phenyl)(2,4,6‐trimethylphenyl)amine] (PTAA). HTMs are essential for high‐performance PSC devices. Although effective, these materials require a relatively high degree of doping with additives to improve charge mobility and interlayer/substrate compatibility, introducing doping‐induced stability issues with these HTMs, and further, additional costs and experimental complexity associated with using these doped materials. This article reviews dopant‐free organic HTMs for PSCs, outlining reports of structures with promising properties toward achieving low‐cost, effective, and scalable materials for devices with long‐term stability. It summarizes recent literature reports on non‐doped, alternative, and more stable HTMs used in PSCs as essential components for high‐efficiency cells, categorizing HTMs as reported for different PSC architectures in addition to use of dopant‐free small molecular and polymeric HTMs. Finally, an outlook and critical assessment of dopant‐free organic HTMs toward commercial application and insight into the development of stable PSC devices is provided.     

Metal‐Oxide‐Free Methylammonium Lead Iodide Perovskite‐Based Solar Cells: the Influence of Organic Charge Transport Layers

Metal‐oxide‐free methylammonium lead iodide perovskite‐based solar cells are prepared using a dual‐source thermal evaporation method. This method leads to high quality reproducible films with large crystal domain sizes allowing for an in depth study of the effect of perovskite film thickness and the nature of the electron and hole blocking layers on the device performance. The power conversion efficiency increases from 4.7% for a device with only an organic electron blocking layer to almost 15% when an organic hole blocking layer is also employed. In addition to the in depth study on small area cells, larger area cells (approx. 1 cm^?2) are prepared and exhibit efficiencies in excess of 10%.     

Fully Solution‐Processed TCO‐Free Semitransparent Perovskite Solar Cells for Tandem and Flexible Applications

Semitransparent perovskite solar cells (st‐PSCs) have received remarkable interest in recent years because of their great potential in applications for solar window, tandem solar cells, and flexible photovoltaics. However, all reported st‐PSCs require expensive transparent conducting oxides (TCOs) or metal‐based thin films made by vacuum deposition, which is not cost effective for large‐scale fabrication: the cost of TCOs is estimated to occupy ≈75% of the manufacturing cost of PSCs. To address this critical challenge, this study reports a low‐temperature and vacuum‐free strategy for the fabrication of highly efficient TCO‐free st‐PSCs. The TCO‐free st‐PSC on glass exhibits 13.9% power conversion efficiency (PCE), and the four‐terminal tandem cell made with the st‐PSC top cell and c‐Si bottom cell shows an overall PCE of 19.2%. Due to the low processing temperature, the fabrication of flexible st‐PSCs is demonstrated on polyethylene terephthalate and polyimide, which show excellent stability under repeated bending or even crumbing.     

Efficient Indium‐Doped TiOx Electron Transport Layers for High‐Performance Perovskite Solar Cells and Perovskite‐Silicon Tandems

In addition to a good perovskite light absorbing layer, the hole and electron transport layers play a crucial role in achieving high‐efficiency perovskite solar cells. Here, a simple, one‐step, solution‐based method is introduced for fabricating high quality indium‐doped titanium oxide electron transport layers. It is shown that indium‐doping improves both the conductivity of the transport layer and the band alignment at the ETL/perovskite interface compared to pure TiO₂, boosting the fill‐factor and voltage of perovskite cells. Using the optimized transport layers, a high steady‐state efficiency of 17.9% for CH₃NH₃PbI₃‐based cells and 19.3% for Cs_0.05(MA_0.17FA_0.83)_0.95Pb(I_0.83Br_0.17)₃‐based cells is demonstrated, corresponding to absolute efficiency gains of 4.4% and 1.2% respectively compared to TiO₂‐based control cells. In addition, a steady‐state efficiency of 16.6% for a semi‐transparent cell is reported and it is used to achieve a four‐terminal perovskite‐silicon tandem cell with a steady‐state efficiency of 24.5%.     

Aqueous‐Processed Polymer/Nanocrystal Hybrid Solar Cells with Double‐Side Bulk Heterojunction

Aqueous‐solution‐processed solar cells (ASCs) are promising candidates of the next‐generation large‐area, low‐cost, and flexible photovoltaic conversion equipment because of their unique environmental friendly property. Aqueous‐solution‐processed polymer/nanocrystals (NCs) hybrid solar cells (AHSCs) can effectively integrate the advantages of the polymer (e.g., flexibility and lightweight) and the inorganic NCs (e.g., high mobility and broad absorption), and therefore be considered as an ideal system to further improve the performance of ASCs. In this work, double‐side bulk heterojunction (BHJ), in which one BHJ combines the active material with electron transport material and the other combines the active material with hole transport material, is developed in the AHSCs. Through comparing with the single‐side BHJ device, promoted carrier extraction, enhanced internal quantum efficiency, extended width of the depletion region, and prolonged carrier lifetime are achieved in double‐side BHJ devices. As a result, power conversion efficiency exceeding 6% is obtained, which breaks the bottleneck efficiency around ≈5.5%. This work demonstrates a device architecture which is more remarkable compared with the traditional only donor–acceptor blended BHJ. Under conservative estimation, it provides instructive architecture not only in the ASCs, but also in the organic solar cells (SCs), quantum dot SCs, and perovskite SCs.