Emerging 2D Layered Materials for Perovskite Solar Cells

Perovskite solar cells (PSCs) are now at the forefront of the state‐of‐the‐art photovoltaic technologies due to their high efficiency and low fabrication costs. To further realize the potential of this fascinating class of solar cells, nanostructured functional materials have been playing important roles. 2D layered materials have attracted a great deal of interest due to their fascinating properties and unique structure. Recently, the exploration of a wide range of novel 2D materials for use in PSCs has seen considerable progress, but still a lot remains to be done in this field. In this progress report, the advancements that have recently been made in the application of these emerging 2D materials, beyond graphene, for PSCs are presented. Both the advantages and challenges of these 2D materials for PSCs are highlighted. Finally, important directions for the future advancements toward efficient, low‐cost, and stable PSCs are outlined.     

Single‐Walled Carbon Nanotubes in Emerging Solar Cells: Synthesis and Electrode Applications

Emerging solar cells, namely, organic solar cells and perovskite solar cells, are the thin‐film photovoltaics that have light to electricity conversion efficiencies close to that of silicon solar cells while possessing advantages in having additional functionalities, facile‐processability, and low fabrication cost. To maximize these advantages, the electrode components must be replaced by materials that are more flexible and cost‐effective. Researchers around the globe have been looking for the new electrodes that meet these requirements. Among many candidates, single‐walled carbon nanotubes have demonstrated their feasibility as the new alternative to conventional electrodes, such as indium tin oxide and metals. This review discusses various growth methods of single‐walled carbon nanotubes and their electrode applications in thin‐film photovoltaics.     

Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices

The successful isolation of phosphorene (atomic layer thick black phosphorus) in 2014 has currently aroused the interest of 2D material researchers. In this review, first, the fundamentals of phosphorus allotropes, phosphorene, and black phosphorus, are briefly introduced, along with their structures, properties, and synthesis methods. Second, the readers are presented with an overview of their energy applications. Particularly in electrochemical energy storage, the large interlayer spacing (0.53 nm) in phosphorene allows the intercalation/deintercalation of larger ions as compared to its graphene counterpart. Therefore, phosphorene may possess greater potential for high electrochemical performance. In addition, the status of lithium ion batteries as well as secondary sodium ion batteries is reviewed. Next, each application for energy generation, conversion, and storage is described in detail with milestones as well as the challenges. These emerging applications include supercapacitors, photovoltaic devices, water splitting, photocatalytic hydrogenation, oxygen evolution, and thermoelectric generators. Finally the fast‐growing dynamic field of phosphorene research is summarized and perspectives on future possibilities are presented calling on the efforts of chemists, physicists, and material scientists     

MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency

MXene, a new class of 2D materials, has gained significant attention owing to its attractive electrical conductivity, tunable work function, and metallic nature for wide range of applications. Herein, delaminated few layered Ti₃C₂T_x MXene contacted Si solar cells with a maximum power conversion efficiency (PCE) of ≈11.5% under AM1.5G illumination are demonstrated. The formation of an Ohmic junction of the metallic MXene to n⁺‐Si surface efficiently extracts the photogenerated electrons from n⁺np⁺‐Si, decreases the contact resistance, and suppresses the charge carrier recombination, giving rise to excellent open‐circuit voltage and short‐circuit current density. The rapid thermal annealing process further improves the electrical contact between Ti₃C₂T_x MXene and n⁺‐Si surface by reducing sheet resistance, increasing electrical conductivity, and decreasing cell series resistance, thus leading to a remarkable improvement in fill factor and overall PCE. The work demonstrated here can be extended to other MXene compositions as potential electrodes for developing highly performing solar cells.     

Molecular Interlayers in Hybrid Perovskite Solar Cells

Organic–inorganic hybrid perovskite solar cells (PSC) are promising third‐generation solar cells. They exhibit good power conversion efficiencies and in principle they can be fabricated with lower energy consumption than many more established technologies. To improve the efficiency and long‐term stability of PSC, organic molecules are frequently used as “interlayers.” Interlayers are thin layers or monolayers of organic molecules that modify a specific interface in the solar cell. Here, the latest progress in the use of interlayers to optimize the performance of PSC is reviewed. Where appropriate interesting examples from the field of organic photovoltaics (OPV) are also presented as there are many similarities in the types of interlayers that are used in PSC and OPV. The review is organized into three parts. The first part focuses on why organic molecule interlayers improve the performance of the solar cells. The second section discusses commonly used molecular interlayers. In the last part, different approaches to make thin and uniform interlayers are discussed.     

Few‐Layer Black Phosphorus Nanosheets as Electrocatalysts for Highly Efficient Oxygen Evolution Reaction

Black phosphorus (BP) is a new rediscovered layered material, which has attracted enormous interests in the field of electrocatalysis. Recent investigations reveal that bulk BP is a promising electrocatalyst for oxygen evolution reactions (OER), whereas its bulk crystal structure restricts sufficient active sites for achieving highly efficient OER catalytic performances. Toward this end, few‐layer BP nanosheets prepared by facile liquid exfoliation are applied as electrocatalysts and exhibit preferable electrocatalytic OER activity in association with structural robustness; subsequently, the dependence of current density and applied bias potential on the concentration of OH^? has also been uncovered. Most importantly, we are aware that reduction in the thickness of BP nanosheets would generate extra active sites from the ultrathin planar structure and complimenting to the electrocatalytic activities. It is further anticipated that the current work might provide further implementation about the OER performance of BP nanosheets, thereby, offering extendable availabilities for BP‐based electrocatalysts in constructing high‐performance OER devices.     

Foldable Semitransparent Organic Solar Cells for Photovoltaic and Photosynthesis

Semitransparent organic solar cells (ST‐OSCs) have attracted extensive attention for their potential greenhouse applications. Conventional ST‐OSCs are typically based on indium tin oxide (ITO) electrodes which suffer from mechanical brittleness. Therefore, alternatives for ITO are required for realization of foldable‐flexible ST‐OSCs (FST‐OSCs). Herein, flexible poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) electrodes are prepared as ITO alternatives via polyhydroxy compound (xylitol) microdoping and acid treatment. As a result, flexible opaque OSCs based on PBDB‐T‐2F:Y6 photoactive system yield a high efficiency of 14.20%. The desirable optical properties of modified PEDOT:PSS electrodes in the visible light region and PBDB‐T‐2F:Y6 photoactive layer in the near‐infrared region facilitate the fabrication of FST‐OSCs with over 10% efficiency and 21% average visible light transmittance. Those FST‐OSCs also display excellent mechanical stability against bending and folding due to the xylitol doping, where over 80% of the initial efficiency can still be maintained even after 1000 folding cycles. Meanwhile, parallel comparisons between plants grown under direct sunlight with a FST‐OSCs roof and those under direct sunlight yield very similar results in terms of branch sturdiness and hypertrophic leaves. The results pave the way for realizing high‐performing FST‐OSCs based on PEDOT:PSS electrodes that could utilize visible light for plant growth and infrared light for power generation.     

Antimony (V) Complex Halides: Lead‐Free Perovskite‐Like Materials for Hybrid Solar Cells

Using bromoantimonate (V) (N‐EtPy)[SbBr₆] as an example, it is demonstrated that ABX₆ compounds can form perovskite‐like 3D crystalline frameworks with short interhalide contacts, enabling advanced optoelectronic characteristics of these materials. The designed compound shows an impressive performance in planar junction solar cells delivering external quantum efficiency of ≈80% and power conversion efficiency of ≈4%, thus being comparable with the conventional perovskite material MAPbBr₃. The discovery of the first perovskite‐like compound ABX₆ exhibiting good photovoltaic performance opens wide opportunities for rational design of novel perovskite‐like semiconductor materials for advanced electronic and photovoltaic applications.     

Few‐Layer MoS2 Flakes as Active Buffer Layer for Stable Perovskite Solar Cells

Solution‐processed few‐layer MoS₂ flakes are exploited as an active buffer layer in hybrid lead–halide perovskite solar cells (PSCs). Glass/FTO/compact‐TiO₂/mesoporous‐TiO₂/CH₃NH₃PbI₃/MoS₂/Spiro‐OMeTAD/Au solar cells are realized with the MoS₂ flakes having a twofold function, acting both as a protective layer, by preventing the formation of shunt contacts between the perovskite and the Au electrode, and as a hole transport layer from the perovskite to the Spiro‐OMeTAD. As prepared PSC demonstrates a power conversion efficiency (η) of 13.3%, along with a higher lifetime stability over 550 h with respect to reference PSC without MoS₂ (Δη/η = ?7% vs. Δη/η = ?34%). Large‐area PSCs (1.05 cm² active area) are also fabricated to demonstrate the scalability of this approach, achieving η of 11.5%. Our results pave the way toward the implementation of MoS₂ as a material able to boost the shelf life of large‐area perovskite solar cells in view of their commercialization.     

Self‐Assembled 2D Perovskite Layers for Efficient Printable Solar Cells

2D organic–inorganic hybrid Ruddlesden–Popper perovskites have emerged recently as candidates for the light‐absorbing layer in solar cell technology due largely to their impressive operational stability compared with their 3D‐perovskite counterparts. The methods reported to date for the preparation of efficient 2D perovksite layers for solar cells involve a nonscalable spin‐coating step. In this work, a facile, spin‐coating‐free, directly scalable drop‐cast method is reported for depositing precursor solutions that self‐assemble into highly oriented, uniform 2D‐perovskite films in air, yielding perovskite solar cells with power conversion efficiencies (PCE) of up to 14.9% (certified PCE of 14.33% ± 0.34 at 0.078 cm²). This is the highest PCE to date for a solar cell with 2D‐perovskite layers fabricated by nonspin‐coating method. The PCEs of the cells display no evidence of degradation after storage in a nitrogen glovebox for more than 5 months. 2D‐perovskite layer deposition using a slot‐die process is also investigated for the first time. Perovskite solar cells fabricated using batch slot‐die coating on a glass substrate or R2R slot‐die coating on a flexible substrate produced PCEs of 12.5% and 8.0%, respectively.