An Ultralong Lifespan and Low‐Temperature Workable Sodium‐Ion Full Battery for Stationary Energy Storage

Presently, commercialization of sodium‐ion batteries (SIBs) is still hindered by the relatively poor energy‐storage performance. In addition, low‐temperature (low‐T) Na storage is another principal concern for the wide application of SIBs. Unfortunately, the Na‐transfer kinetics is extremely sluggish at low‐T, as a result, there are few reports on low‐T SIBs. Here, an advanced low‐T sodium‐ion full battery (SIFB) assembled by an anode of 3D Se/graphene composite and a high‐voltage cathode (Na₃V₂(PO₄)₂O₂F) is developed, exhibiting ultralong lifespan (over even 15 000 cycles, the capacity retention is still up to 86.3% at 1 A g^?1), outstanding low‐T energy storage performance (e.g., all values of capacity retention are >75% after 1000 cycles at temperatures from 25 to ?25 °C at 0.4 A g^?1), and high‐energy/power properties. Such ultralong lifespan signifies that the developed sodium‐ion full battery can be used for longer than 60 years, if batteries charge/discharge once a day and 80% capacity retention is the standard of battery life. As a result, the present study not only promotes the practicability and commercialization of SIBs but also points out the new developing directions of next‐generation energy storage for wider range applications.     

Layered Oxide Cathodes for Sodium‐Ion Batteries: Phase Transition,Air Stability,and Performance

The increasing demand for replacing conventional fossil fuels with clean energy or economical and sustainable energy storage drives better battery research today. Sodium‐ion batteries (SIBs) are considered as a promising alternative for grid‐scale storage applications due to their similar “rocking‐chair” sodium storage mechanism to lithium‐ion batteries, the natural abundance, and the low cost of Na resources. Searching for appropriate electrode materials with acceptable electrochemical performance is the key point for development of SIBs. Layered transition metal oxides represent one of the most fascinating electrode materials owing to their superior specific capacity, environmental benignity, and facile synthesis. However, three major challenges (irreversible phase transition, storage instability, and insufficient battery performance) are known for cathodes in SIBs. Herein, a comprehensive review on the latest advances and progresses in the exploration of layered oxides for SIBs is presented, and a detailed and deep understanding of the relationship of phase transition, air stability, and electrochemical performance in layered oxide cathodes is provided in terms of refining the structure–function–property relationship to design improved battery materials. Layered oxides will be a competitive and attractive choice as cathodes for SIBs in next‐generation energy storage devices.     

Exploration of Advanced Electrode Materials for Rechargeable Sodium‐Ion Batteries

As the rapid growth of the lithium‐ion battery (LIB) market raises concerns about limited lithium resources, rechargeable sodium‐ion batteries (SIBs) are attracting growing attention in the field of electrical energy storage due to the large abundance of sodium. Compared with the well‐developed commercial LIBs, all components of the SIB system, such as the electrode, electrolyte, binder, and separator, need further exploration before reaching a practical industrial application level. Drawing lessons from the LIB research, the SIB electrode materials are being extensively investigated, resulting in tremendous progress in recent years. In this article, the progress of the research on the development of electrode materials for SIBs is summarized. A variety of new electrode materials for SIBs, including transition‐metal oxides with a layered or tunnel structure, polyanionic compounds, and organic molecules, have been proposed and systematically investigated. Several promising materials with moderate energy density and ultra‐long cycling performance are demonstrated. Appropriate doping and/or surface treatment methodologies are developed to effectively promote the electrochemical properties. The challenges of and opportunities for exploiting satisfactory SIB electrode materials for practical applications are outlined.     

Sodium‐Ion Battery Materials and Electrochemical Properties Reviewed

The demand for electrochemical energy storage technologies is rapidly increasing due to the proliferation of renewable energy sources and the emerging markets of grid‐scale battery applications. The properties of batteries are ideal for most electrical energy storage (EES) needs, yet, faced with resource constraints, the ability of current lithium‐ion batteries (LIBs) to match this overwhelming demand is uncertain. Sodium‐ion batteries (SIBs) are a novel class of batteries with similar performance characteristics to LIBs. Since they are composed of earth‐abundant elements, cheaper and utility scale battery modules can be assembled. As a result of the learning curve in the LIB technology, a phenomenal progression in material development has been realized in the SIB technology. In this review, innovative strategies used in SIB material development, and the electrochemical properties of anode, cathode, and electrolyte combinations are elucidated. Attractive performance characteristics are herein evidenced, based on comparative gravimetric and volumetric energy densities to state‐of‐the‐art LIBs. In addition, opportunities and challenges toward commercialization are herein discussed based on patent data trend analysis. With extensive industrial adaptations expected, the commercial prospects of SIBs look promising and this once discarded technology is set to play a major role in EES applications.     

High‐Abundance and Low‐Cost Metal‐Based Cathode Materials for Sodium‐Ion Batteries: Problems,Progress, and Key Technologies

Recently, room‐temperature stationary sodium‐ion batteries (SIBs) have received extensive investigations for large‐scale energy storage systems (EESs) and smart grids due to the huge natural abundance and low cost of sodium. The SIBs share a similar “rocking‐chair” sodium storage mechanism with lithium‐ion batteries; thus, selecting appropriate electrodes with a low cost, satisfactory electrochemical performance, and high reliability is the key point for the development for SIBs. On the other hand, the carefully chosen elements in the electrodes also largely determine the cost of SIBs. Therefore, earth‐abundant‐metal‐based compounds are ideal candidates for reducing the cost of electrodes. Among all the high‐abundance and low‐cost metal elements, cathodes containing iron and/or manganese are the most representative ones that have attracted numerous studies up till now. Herein, recent advances on both iron‐ and manganese‐based cathodes of various types, such as polyanionic, layered oxide, MXene, and spinel, are highlighted. The structure–function property for the iron‐ and manganese‐based compounds is summarized and analyzed in detail. With the participation of iron and manganese in sodium‐based cathode materials, real applications of room‐temperature SIBs in large‐scale EESs will be greatly promoted and accelerated in the near future.     

Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries

Lithium‐ion batteries (LIBs) have dominated the portable electronics industry and solid‐state electrochemical research and development for the past two decades. In light of possible concerns over the cost and future availability of lithium, sodium‐ion batteries (SIBs) and other new technologies have emerged as candidates for large‐scale stationary energy storage. Research in these technologies has increased dramatically with a focus on the development of new materials for both the positive and negative electrodes that can enhance the cycling stability, rate capability, and energy density. Two‐dimensional (2D) materials are showing promise for many energy‐related applications and particularly for energy storage, because of the efficient ion transport between the layers and the large surface areas available for improved ion adsorption and faster surface redox reactions. Recent research highlights on the use of 2D materials in these future ‘beyond‐lithium‐ion’ battery systems are reviewed, and strategies to address challenges are discussed as well as their prospects.     

Ethers Illume Sodium‐Based Battery Chemistry: Uniqueness,Surprise, and Challenges

Sodium‐ion batteries (SIBs) have the potential to be practically applied in large‐scale energy storage markets. The rapid progress of SIBs research is primarily focused on electrodes, while electrolytes attract less attention. Indeed, the improvement of electrode performance is arguably correlated with the electrolyte optimization. In conventional lithium‐ion batteries (LIBs), ether‐based electrolytes are historically less practical owing to the insufficient passivation of both anodes and cathodes. As an important class of aprotic electrolytes, ethers have revived with the emerging lithium‐sulfur and lithium‐oxygen batteries in recent years, and are even booming in the wave of SIBs. Ether‐based electrolytes are unique to enabling these new battery chemistries in terms of producing stable ternary graphite intercalation compounds, modifying anode solid electrolyte interphases, reducing the solubility of intermediates, and decreasing polarization. Better still, ether‐based electrolytes are compatible with specific inorganic cathodes and could catalyze the assembly of full SIBs prototypes. This Research News article aims to summarize the recent critical reports on ether‐based electrolytes in sodium‐based batteries, to unveil the uniqueness of ether‐based electrolytes to advancing diverse electrode materials, and to shed light on the viability and challenges of ether‐based electrolytes in future sodium‐based battery chemistries.     

Challenges in Developing Electrodes,Electrolytes, and Diagnostics Tools to Understand and Advance Sodium‐Ion Batteries

Considering the natural abundance and low cost of sodium resources, sodium‐ion batteries (SIBs) have received much attention for large‐scale electrochemical energy storage. However, smart structure design strategies and good mechanistic understanding are required to enable advanced SIBs with high energy density. In recent years, the exploration of advanced cathode, anode, and electrolyte materials, as well as advanced diagnostics have been extensively carried out. This review mainly focuses on the challenging problems for the attractive battery materials (i.e., cathode, anode, and electrolytes) and summarizes the latest strategies to improve their electrochemical performance as well as presenting recent progress in operando diagnostics to disclose the physics behind the electrochemical performance and to provide guidance and approaches to design and synthesize advanced battery materials. Outlook and perspectives on the future research to build better SIBs are also provided.     

Transition Metal Oxide Anodes for Electrochemical Energy Storage in Lithium‐ and Sodium‐Ion Batteries

Lithium‐ion batteries (LIBs) with outstanding energy and power density have been extensively investigated in recent years, rendering them the most suitable energy storage technology for application in emerging markets such as electric vehicles and stationary storage. More recently, sodium, one of the most abundant elements on earth, exhibiting similar physicochemical properties as lithium, has been gaining increasing attention for the development of sodium‐ion batteries (SIBs) in order to address the concern about Li availability and cost—especially with regard to stationary applications for which size and volume of the battery are of less importance. Compared with traditional intercalation reactions, conversion reaction‐based transition metal oxides (TMOs) are prospective anode materials for rechargeable batteries thanks to their low cost and high gravimetric specific capacities. In this review, the recent progress and remaining challenges of conversion reactions for LIBs and SIBs are discussed, covering an overview about the different synthesis methods, morphological characteristics, as well as their electrochemical performance. Potential future research directions and a perspective toward the practical application of TMOs for electrochemical energy storage are also provided.     

Recent Progress on Spray Pyrolysis for High Performance Electrode Materials in Lithium and Sodium Rechargeable Batteries

Advanced electrode materials have been intensively explored for next‐generation lithium‐ion batteries (LIBs), and great progresses have been achieved for many potential candidates at the lab‐scale. To realize the commercialization of these materials, industrially‐viable synthetic approaches are urgently needed. Spray pyrolysis (SP), which is highly scalable and compatible with on‐line continuous production processes, offers great fidelity in synthesis of electrode materials with complex architectures and chemistries. In this review, motivated by the rapid advancement of the given technology in the battery area, we have summarized the recent progress on SP for preparing a great variety of anode and cathode materials of LIBs with emphasis on their unique structures generated by SP and how the structures enhanced the electrochemical performance of various electrode materials. Considering the emerging popularity of sodium‐ion batteries (SIBs), recent electrode materials for SIBs produced by SP will also be discussed. Finally, the powerfulness and limitation along with future research efforts of SP on preparing electrode materials are concisely provided. Given current worldwide interests on LIBs and SIBs, we hope this review will greatly stimulate the collaborative efforts among different communities to optimize existing approaches and to develop innovative processes for preparing electrode materials.     

The First Report on Excellent Cycling Stability and Superior Rate Capability of Na3V2(PO4)3 for Sodium Ion Batteries

Sodium ion batteries are attractive for the rapidly emerging large‐scale energy storage market for intermittent renewable resources. Currently a viable cathode material does not exist for practical non‐aqueous sodium ion battery applications. Here we disclose a high performance, durable electrode material based on the 3D NASICON framework. Porous Na₃V₂(PO₄)₃/C was synthesized using a novel solution‐based approach. This material, as a cathode, is capable of delivering an energy storage capacity of ～400 mWh/g vs. sodium metal. Furthermore, at high current rates (10, 20 and 40 C), it displayed remarkable capacity retention. Equally impressive is the long term cycle life. Nearly 50% of the initial capacity was retained after 30,000 charge/discharge cycles at 40 C (4.7 A/g). Notably, coulombic efficiency was 99.68% (average) over the course of cycling. To the best of our knowledge, the combination of high energy density, high power density and ultra long cycle life demonstrated here has never been reported before for sodium ion batteries. We believe our findings will have profound implications for developing large‐scale energy storage systems for renewable energy sources.     

A High‐Power Na3V2(PO4)3‐Bi Sodium‐Ion Full Battery in a Wide Temperature Range

Sodium‐ion batteries (SIBs) that operate in a wide temperature range are in high demand for practical large‐scale electric energy storage. Herein, a novel full SIB is composed of a bulk Bi anode, a Na₃V₂(PO₄)₃/carbon nanotubes composite (NVP‐CNTs) cathode and a NaPF₆‐diglyme electrolyte. The Bi anode gradually evolves into a porous network in the ether‐based electrolyte during initial cycles, and in the NVP‐CNTs cathode the NVP is cross linked by CNTs to show large exchange current density. These unique features merit the full SIB of Bi//NVP‐CNTs with high Na⁺ diffusion coefficient and low reaction activation energy, and hence fast Na⁺ transport and facile redox reaction kinetics. The resultant full SIB presents high power density of 2354.6 W kg^?1 and energy density of 150 Wh kg^?1 and superior cycling stability in a wide temperature range from ?15 to 45 °C. This will shed light on battery design, and promote their development for practical applications in various weather conditions.     

Carbon Anodes for Nonaqueous Alkali Metal‐Ion Batteries and Their Thermal Safety Aspects

Since their commercialization by Sony in 1991, graphite anodes in combination with various cathodes have enabled the widespread success of lithium‐ion batteries (LIBs), providing over 10 billion rechargeable batteries to the global population. Next‐generation nonaqueous alkali metal‐ion batteries, namely sodium‐ion batteries (SIBs) and potassium‐ion batteries (PIBs), are projected to utilize intercalation‐based carbon anodes as well, due to their favorable electrochemical properties. While traditionally graphite anodes have dominated the market share of LIBs, other carbon materials have been investigated, including graphene, carbon nanotubes, and disordered carbons. The relationship between carbon material properties, electrochemical performance, and charge storage mechanisms is clarified for these alkali metal‐ion batteries, elucidating possible strategies for obtaining enhanced cycling stability, specific capacity, rate capability, and safety aspects. As a key component in determining cell performance, the solid electrolyte interphase layer is described in detail, particularly for its dependence on the carbon anode. Finally, battery safety at extreme temperatures is discussed, where carbon anodes are susceptible to dendrite formation, accelerated aging, and eventual thermal runaway. As society pushes toward higher energy density LIBs, this review aims to provide guidance toward the development of sustainable next‐generation SIBs and PIBs.     

Routes to High Energy Cathodes of Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) are now being actively developed as low cost and sustainable alternatives to lithium‐ion batteries (LIBs) for large‐scale electric energy storage applications. In recent years, various inorganic and organic Na compounds, mostly mimicked from their Li counterparts, have been synthesized and tested for SIBs, and some of them indeed demonstrate comparable specific capacity to the presently developed LIB electrodes. However, the lack of suitable cathode materials is still a major obstacle to the commercial development of SIBs. Here, we present a brief review on the recent developments of SIB cathodes, with a focus on low cost and high energy density materials (> 450 Wh kg^?1 vs Na) together with discussion of their Na‐storage mechanisms. The considerable differences in the structural requirements for Li‐ and Na‐storage reactions mean that it is not sufficient to design SIB cathode materials by simply mimicking LIB materials, and therefore great efforts are needed to discover new materials and reaction mechanisms to further develop variable cathodes for advanced SIB technology. Some directions for future research and possible strategies for building advanced cathode materials are also proposed here.     

Boosting Fast Sodium Storage of a Large‐Scalable Carbon Anode with an Ultralong Cycle Life

Sodium‐ion batteries (SIBs) are considered to be a promising alternative for large‐scale electricity storage. However, it is urgent to develop new anode materials with superior ultralong cycle life performance at high current rates. Herein, a low‐cost and large‐scalable sulfur‐doped carbon anode material that exhibits the best high‐rate cycle performance and the longest cycle life ever reported for carbon anodes is developed. The material delivers a reversible capacity of 142 mA h g^?1 at a current rate up to 10 A g^?1. After 10 000 cycles the capacity is remained at 126.5 mA h g^?1; 89.1% of the initial value. Density functional theory computations demonstrate that the sulfur‐doped carbon has a strong binding affinity for sodium which promotes sodium storage. Meanwhile, the kinetics analysis identifies the capacitive charge storage as a large contributor to sodium storage, which favors ultrafast storage of sodium ions. These results demonstrate a new way to design carbon‐based SIBs anodes for next‐generation large‐scale electricity storage.     

Low-Temperature Sodium-Ion Batteries: Challenges and Progress

As an ideal candidate for the next generation of large-scale energy storage devices, sodium-ion batteries (SIBs) have received great attention due to their low cost. However, the practical utility of SIBs faces constraints imposed by geographical and environmental factors, particularly in high-altitude and cold regions. In these areas, the low-temperature (LT) performance of SIBs presents a pressing technological challenge that requires significant breakthroughs. In LT environments, the electrochemical reaction kinetics of SIBs are sluggish, the electrode/electrolyte interface is unstable, and the diffusion of sodium ions in electrode materials is slow, leading to a decrease in battery performance. Therefore, the reasonable design of electrolyte and electrode materials is of great significance for optimizing the LT performance of SIBs. In this review, the research progress of LT SIBs electrolytes, cathode, and anode materials, as well as sodium metal batteries and solid-state electrolytes is systematically summarized in recent years, aiming to understand the design principles of LT SIBs, clarify the basic research and development of high-performance SIBs in practical applications, and promote the development of SIBs technology in the full temperature range.     

Na‐Ion Batteries for Large Scale Applications: A Review on Anode Materials and Solid Electrolyte Interphase Formation

The urgent need for optimizing the available energy through smart grids and efficient large‐scale energy storage systems is pushing the construction and deployment of Li‐ion batteries in the MW range which, in the long term, are expected to hit the GW dimension while demanding over 1000 ton of positive active material per system. This amount of Li‐based material is equivalent to almost 1% of current Li consumption and can strongly influence the evolution of the lithium supply and cost. Given this uncertainty, it becomes mandatory to develop an energy storage technology that depends on almost infinite and widespread resources: Na‐ion batteries are the best technology for large‐scale applications. With small working cells in the market that cannot compete in cost ($/W h) with commercial Li‐ion batteries, the consolidation of Na‐ion batteries mainly depends on increasing their energy density and stability, the negative electrodes being at the heart of these two requirements. Promising Na‐based negative electrodes for large‐scale battery applications are reviewed, along with the study of the solid electrolyte interphase formed in the anode surface, which is at the origin of most of the stability problems.     

Heteroatom Doping: An Effective Way to Boost Sodium Ion Storage

In response to the change of energy landscape, sodium‐ion batteries (SIBs) are becoming one of the most promising power sources for the post‐lithium‐ion battery (LIB) era due to the cheap and abundant nature of sodium, and similar electrochemical properties to LIBs. The electrochemical performance of electrode materials for SIBs is closely bound up with their crystal structures and intrinsic electronic/ionic states. Apart from nanoscale design and conductive composite strategies, heteroatom doping is another effective way to enhance the intrinsic transfer characteristics of sodium ions and electrons in crystal structures to accelerate reaction kinetics and thereby achieve high performance. In this review, the recent advancements in heteroatom doping for sodium ion storage of electrode materials are reviewed. Specifically, different doping strategies including nonmetal element doping (e.g., nitrogen, sulfur, phosphorous, boron, fluorine), metal element doping (magnesium, titanium, iron, aluminum, nickel, copper, etc.), and dual/triple doping (such as N–S, N–P, N–S–P) are reviewed and summarized in detail. Furthermore, various doping methods are introduced and their advantages and disadvantages are discussed. The doping effect on crystal structure and intrinsic electronic/ionic state are illustrated and the relationship with capacity and energy/power density is interrogated. Finally, future development trends in doping strategies for advanced SIBs electrodes are analyzed.     

Progress in High‐Voltage Cathode Materials for Rechargeable Sodium‐Ion Batteries

Room‐temperature rechargeable sodium‐ion batteries are considered as a promising alternative technology for grid and other storage applications due to their competitive cost benefit and sustainable resource supply, triumphing other battery systems on the market. To facilitate the practical realization of the sodium‐ion technology, the energy density of sodium‐ion batteries needs to be boosted to the level of current commercial Li‐ion batteries. An effective approach would be to elevate the operating voltage of the battery, which requires the use of electrochemically stable cathode materials with high voltage versus Na⁺/Na. This review summarizes the recent progress with the emerging high‐voltage cathode materials for room‐temperature sodium‐ion batteries, which include layered transitional‐metal oxides, Na‐rich materials, and polyanion compounds. The key challenges and corresponding strategies for these materials are also discussed, with an emphasis placed on the intrinsic structural properties, Na storage electrochemistry, and the voltage variation tendency with respect to the redox reactions. The insights presented in this article can serve as a guide for improving the energy densities of room‐temperature Na‐ion batteries.     

Surface Pseudocapacitive Mechanism of Molybdenum Phosphide for High‐Energy and High‐Power Sodium‐Ion Capacitors

Sodium‐based energy storage technologies are potential candidates for large‐scale grid applications owing to the earth abundance and low cost of sodium resources. Transition metal phosphides, e.g. MoP, are promising anode materials for sodium‐ion storage, while their detailed reaction mechanisms remain largely unexplored. Herein, the sodium‐ion storage mechanism of hexagonal MoP is systematically investigated through experimental characterizations, density functional theory calculations, and kinetics analysis. Briefly, it is found that the naturally covered surface amorphous molybdenum oxides layers on the MoP grains undergo a faradaic redox reaction during sodiation and desodiation, while the inner crystalline MoP remains unchanged. Remarkably, the MoP anode exhibits a pseudocapacitive‐dominated behavior, enabling the high‐rate sodium storage performance. By coupling the pseudocapacitive anode with a high‐rate‐battery‐type Na₃V₂O₂(PO₄)₂F@rGO cathode, a novel sodium‐ion full cell delivers a high energy density of 157 Wh kg^?1 at 97 W kg^?1 and even 52 Wh kg^?1 at 9316 W kg^?1. These findings present the deep understanding of the sodium‐ion storage mechanism in hexagonal MoP and offer a potential route for the design of high‐rate sodium‐ion storage materials and devices.