Developmental dynamics of ecomorphological convergence in a transcontinental lizard radiation

Phenotypic convergence has confounded evolutionary biologists for centuries, explained as adaptations to shared selective pressures, or alternatively, the result of limited developmental pathways. We tested the relative roles of adaptation and constraint in generating convergent cranial morphologies across a large lizard radiation, the Lacertidae, whose members inhabit diverse environments throughout the Old World and display high amounts of homoplasy associated with ecological niche. Using 3D X‐ray computed tomography, we quantified cranial shape variation associated with ontogeny, allometry, and ecology, covering all lacertid genera and one‐third of species diversity. Landmark‐based geometric morphometrics showed that cranial shape varied significantly among biomes, with substantial convergence among arid‐dwelling lineages. Comparisons of species cranial growth trajectories between biomes revealed that allometric postdisplacement, as evidenced by decreased elevation of a constant ontogenetic slope, drives the convergent paedomorphic appearance of independent arid‐dwelling forms. We hypothesize that observed heterochronic changes reflect temporal compression of ancestral life history in response to extreme environments, with associated phenotypes occurring as by‐products of adaptive shifts in reproductive investment. Although allometry has long been considered a developmental constraint, our results demonstrate that allometric flexibility during early ontogeny produces convergent ecomorphologies over vast temporal and spatial scales, thus dramatically obscuring underlying phylogenetic signals.     

ALLOMETRIC CONSTRAINTS AND THE EVOLUTION OF ALLOMETRY

Morphological traits often covary within and among species according to simple power laws referred to as allometry. Such allometric relationships may result from common growth regulation, and this has given rise to the hypothesis that allometric exponents may have low evolvability and constrain trait evolution. We formalize hypotheses for how allometry may constrain morphological trait evolution across taxa, and test these using more than 300 empirical estimates of static (within‐species) allometric relations of animal morphological traits. Although we find evidence for evolutionary changes in allometric parameters on million‐year, cross‐species time scales, there is limited evidence for microevolutionary changes in allometric slopes. Accordingly, we find that static allometries often predict evolutionary allometries on the subspecies level, but less so across species. Although there is a large body of work on allometry in a broad sense that includes all kinds of morphological trait–size relationships, we found relatively little information about the evolution of allometry in the narrow sense of a power relationship. Despite the many claims of microevolutionary changes of static allometries in the literature, hardly any of these apply to narrow‐sense allometry, and we argue that the hypothesis of strongly constrained static allometric slopes remains viable.     

Pitfalls in understanding the functional significance of genital allometry

The male genitalia of arthropods consistently show negative static allometry (the genitalia of small males of a species are disproportionally large, and those of large males are disproportionally small). We discuss relations between the ‘one‐size‐fits‐all’ hypothesis to explain this allometry and the regimes of selection that may be acting on genitalia. We focus on the contrasts between directional vs. stabilizing selection, and natural vs. sexual selection. In addition, we point out some common methodological problems in studies of genital allometry. One‐size‐fits‐all types of arguments for negative allometry imply net stabilizing selection, but the effects of stabilizing selection on allometry will be weaker when the correlation between body size and the trait size is weaker. One‐size‐fits‐all arguments can involve natural as well as sexual selection, and negative allometry can also result from directional selection. Several practical problems make direct tests of whether directional or stabilizing selection is acting difficult. One common methodological problem in previous studies has been concentration on absolute rather than relative values of the allometric slopes of genitalia; there are many reasons to doubt the usefulness of comparing absolute slopes with the usual reference value of 1.00. Another problem has been the failure to recognize that size and shape are independent traits of genitalia; rapid divergence in the shape of genitalia is thus not paradoxical with respect to the reduced variation in their sizes that is commonly associated with negative allometric scaling.     

Phylogenetic and size constrains on cranial ontogenetic allometry of spiny rats (Echimyidae,Rodentia)

Analysis of ontogenetic development is crucial for understanding the emergence of phenotypic discrepancies between animal taxa. The study of allometric trajectories within a phylogenetic context is a feasible approach to assess the morphological change across different evolutionary lineages. Here, we report the disparity of multivariate ontogenetic allometry in the Echimyidae, a taxonomically diverse rodent family, as well as the effects of size on the evolution of skull ontogeny. The ontogenetic trajectories of 15 echimyid operational taxonomic unities (12 genera plus one genus with three species) belonging to all subfamilies and major clades, when plotted in allometric space, revealed strong and significant phylogenetic signals. Allometric trajectories were found to be constrained by phylogenetic ancestry, with changes approximately adjusting to a Brownian motion model of evolution. Moreover, the occupation of allometric space by echimyid taxa was significantly correlated with adult size rather than with shape, suggesting that the variation in adult size might result in critically intrinsic and structural constraints on allometric coefficients. These findings disagreed with the hypothesis that allometric disparities might be mainly adaptive with undetectable phylogenetic signals.     

Postmetamorphic ontogenetic allometry and the evolution of skull shape in Nest‐building frogs Leptodactylus (Anura: Leptodactylidae)

Allometry constitutes an important source of morphological variation. However, its influence in head development in anurans has been poorly explored. By using geometric morphometrics followed by statistical and comparative methods we analyzed patterns of allometric change during cranial postmetamorphic ontogeny in species of Nest‐building frogs Leptodactylus (Leptodactylidae). We found that the anuran skull is not a static structure, and allometry plays an important role in defining its shape in this group. Similar to other groups with biphasic life‐cycle, and following a general trend in vertebrates, ontogenetic changes mostly involve rearrangement in rostral, otoccipital, and suspensorium regions. Ontogenetic transformations are paralleled by shape changes associated with evolutionary change in size, such that the skulls of species of different intrageneric groups are scaled to each other, and small and large species show patterns of paedomorphic/peramorphic features, respectively. Allometric trajectories producing those phenotypes are highly evolvable though, with shape change direction and magnitude varying widely among clades, and irrespective of changes in absolute body size. These results reinforce the importance of large‐scale comparisons of growth patterns to understand the plasticity, evolution, and polarity of morphological changes in different clades.     

Hydraulic architecture and the evolution of shoot allometry in contrasting climates

We used pairs of congeneric shrub species from contrasting habitats to test for repeated evolutionary divergence in leaf-stem allometry and shoot hydraulic architecture in response to water availability. Allometric relationships and mean ratios between leaf size (individual and total area and mass per shoot) and stem cross-sectional area were compared between habitats using six species pairs representing three genera (Arctostaphylos, Baccharis, Ceanothus). We measured correlations among evolutionary changes in allometric, morphological, and physiological traits using phylogenetic independent contrasts. Allometric analysis revealed habitat differences: slopes were homogeneous among species (=1.46), but the more mesic-adapted species generally supported more leaf area at a common stem cross-sectional area. Reducing bivariate allometry to a ratio obscured this pattern because ratios varied with stem size, which was unrelated to habitat. Mean individual leaf size also was not correlated with either water availability or leaf-stem allometry. Stem hydraulic conductivity was generally lower in the xeric-adapted species of each pair, and its evolution mirrored changes in shoot allometry. This study provides evidence for repeated evolutionary divergence in shoot allometry and hydraulic architecture associated with water availability and demonstrates the importance of shoot allometry to water relations, independent of leaf size.     

PATTERNS OF THRESHOLD EVOLUTION IN POLYPHENIC INSECTS UNDER DIFFERENT DEVELOPMENTAL MODELS

Two hypotheses address the evolution of polyphenic traits in insects. Under the developmental reprogramming model, individuals exceeding a threshold follow a different developmental pathway from individuals below the threshold. This decoupling is thought to free selection to independently hone alternative morphologies, increasing phenotypic plasticity and morphological diversity. Under the alternative model, extreme positive allometry explains the existence of alternative phenotypes and divergent phenotypes are developmentally coupled by a continuous reaction norm, such that selection on either morph acts on both. We test the hypothesis that continuous reaction norm polyphenisms, evolve through changes in the allometric parameters of even the smallest males with minimal trait expression, whereas threshold polyphenisms evolve independent of the allometric parameters of individuals below the threshold. We compare two polyphenic species; the dung beetle Onthophagus taurus, whose allometry has been modeled both as a threshold polyphenism and a continuous reaction norm and the earwig Forficula auricularia , whose allometry is best modeled with a discontinuous threshold. We find that across populations of both species, variation in forceps or horn allometry in minor males are correlated to the population's threshold. These findings suggest that regardless of developmental mode, alternative morphs do not evolve independently of one another.     

Modes of ontogenetic allometric shifts in crocodylian vertebrae

During postnatal ontogeny of vertebrates, allometric trends in certain morphological units or dimensions can shift drastically among isometry, positive allometry, and negative allometry. However, detailed patterns of allometric transitions in certain timings have not been explored well. Identifying the presence and nature of allometric shifts is essential for understanding the patterns of changes in relative size and shape and the proximal factors that are controlling these changes mechanistically. Allometric trends in 10 selected vertebrae (cervical 2–caudal 2) from hatchlings to very mature individuals of Alligator mississippiensis (Archosauria, Crocodylia) are reported in the present study. Allometric coefficients in 12 vertebral dimensions are calculated and compared relative to total body length, including centrum, neural spine, transverse process, zygapophysis, and neural pedicle. During the postnatal growth, positive allometry is the most common type of relative change (10 of the 12 dimensions), although the diameter of the neural canal shows a negative allometric trend. However, when using spurious breaks (i.e. allometric trends subdivided into growth stages using certain growth events, and key body sizes and/or ages), vertebral parts exhibit various pathways of allometric shifts. Based on allometric trends in three spurious breaks, separated by the end of endochondral ossification (body length: approximnately 0.9 m), sexual maturity (1.8 m), and the stoppage of body size increase (2.8 m), six types of ontogenetic allometric shifts are established. Allometric shifts exhibit a wide range from positive allometry restricted only in the early postnatal stage (Type I) to life‐long positive allometry (Type VI). This model of ontogenetic allometric shifts is then applied to interpret potential mechanisms (causes) of allometric changes, such as (1) growth itself (when allometric trend gradually decreases to isometric or negative allometric change: Type II–IV allometric shift); (2) developmental constraint (when positive allometry is limited only in the early growth stage: Type I allometric shift); and (3) functional or biomechanical drive (when positive allometry continues throughout ontogeny: Type VI allometric shift).     

Diversity trends and their ontogenetic basis: an exploration of allometric disparity in rodents

It has been hypothesized that most morphological evolution occurs by allometric differentiation. Because rodents encapsulate a phenomenal amount of taxonomic diversity and, among several clades, contrasting levels of morphological diversity, they represent an excellent subject to address the question: how variable are allometric patterns during evolution? We investigated the influence of phylogenetic relations and ecological factors on the results of the first quantification of allometric disparity among rodents by exploring allometric space, a multivariate morphospace here derived from, and encapsulating all, the ontogenetic trajectories of 34 rodent species from two parallel phylogenetic radiations. Disparity was quantified using angles between ontogenetic trajectories for different species and clades. We found an overlapping occupation of allometric space by muroid and hystricognath species, revealing both clades possess similar abilities to evolve in different directions of phenotypic space, and anatomical diversity does not act to constrain the labile nature of allometric patterning. Morphological features to enable efficient processing of food serve to group rodents in allometric space, reflecting the importance of convergent morphology, rather than shared evolutionary history, in the generation of allometric patterns. Our results indicate that the conserved level of morphological integration found among primates cannot simply be extended to all mammals.     

Sex combs,allometry, and asymmetry in Drosophila

There has been recent debate about the expected allometry of sexually‐selected traits. Although sexually‐selected traits exhibit a diversity of allometric patterns, signalling characters are frequently positively allometric. By contrast, insect genitalia tend to be negatively allometric, although the allometry of nongenital sexually‐selected characters in insects is largely unknown (with some notable exceptions). It has also been suggested that there should be a negative association between the asymmetry and size of bilaterally‐paired, sexually‐selected traits, although this claim is controversial. We assessed the allometry and asymmetry (fluctuating asymmetry, FA) of a nongenital contact–courtship structure, the sex comb, in replicate populations of three species of Drosophila (we also measured wing FA). Sex combs are sexually‐selected characters used to grasp the female's abdomen and genitalia and to spread her wings prior to and during copulation. Although species differed in the size of the sex combs, all combs were positively allometric, and comb allometry did not generally differ significantly between species or populations. Comb and wing asymmetry did vary across species, although not across populations of the same species. However, FA was trait specific and was never negatively associated with trait size. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2011, 103 , 923–934.     

Allometric escape from acoustic constraints is rare for frog calls

Allometric constraint is a product of natural selection and physical laws, particularly with respect to body size and traits constrained by properties thereof, such as metabolism, longevity, and vocal frequency. Allometric relationships are often conserved across lineages, indicating that physical constraints dictate scaling patterns in deep time, despite substantial genetic and ecological divergence among organisms. In particular, acoustic allometry (sound frequency ~ body size) is conserved across frogs, in defiance of massive variation in both body size and frequency. Here, we ask how many instances of allometric escape have occurred across the frog tree of life using a Bayesian framework that estimates the location, number, and magnitude of shifts in the adaptive landscape of acoustic allometry. Moreover, we test whether ecology in terms of calling site could affect these relationships. We find that calling site has a major influence on acoustic allometry. Despite this, we identify only four major instances of allometric escape, potentially deriving from ecomorphological adaptations to new signal modalities. In these instances of allometric escape, the optima and strength of the scaling relationship are different than expected for most other frog species, representing new adaptive regimes of body size ~ call frequency. Allometric constraints on frog calls are highly conserved and have rarely allowed escape, despite frequent invasions of new adaptive regimes and dramatic ecomorphological divergence. Our results highlight the rare instances in which natural and sexual selection combined can overcome physical constraints on sound production.     

Life-history variation and allometry for sexual size dimorphism in Pacific salmon and trout

Allometry for sexual size dimorphism (SSD) is common in animals, but how different evolutionary processes interact to determine allometry remains unclear. Among related species SSD (male : female) typically increases with average body size, resulting in slopes of less than 1 when female size is regressed on male size: an allometric relationship formalized as 'Rensch's rule' . Empirical studies show that taxa with male-biased SSD are more likely to satisfy Rensch's rule and that a taxon's mean SSD is negatively correlated with allometric slope, implicating sexual selection on male size as an important mechanism promoting allometry for SSD. I use body length (and life-history) data from 628 (259) populations of seven species of anadromous Pacific salmon and trout (Oncorhynchus spp.) to show that in this genus life-history variation appears to regulate patterns of allometry both within and between species. Although all seven species have intraspecific allometric slopes of less than 1, contrary to expectation slope is unrelated to species' mean SSD, but is instead negatively correlated with two life-history variables: the species' mean marine age and variation in marine age. Second, because differences in marine age among species render SSD and body size uncorrelated, the interspecific slope is isometric. Together, these results provide an example of how evolutionary divergence in life history among related species can affect patterns of allometry for SSD across taxonomic scales.     

A Test of Genital Allometry Using Two Damselfly Species does not Produce Hypoallometric Patterns

It is widely admitted that sexual selection is the responsible force behind genital traits. However, the particular mechanisms of genital evolution are still debated. Recently, studies of genital static allometry in insects have been used to elucidate such mechanisms. Insect genital traits are often reported to show negative allometry (i.e., a slope < 1), which has generated a number of ideas on how genital traits are selected. However, many studies that have inferred selection mechanisms have omitted consideration of the function of genital traits, used unreliable indicators of body size, and only rarely included female genitalia in their analysis. We investigated whether negative allometry operates for genitalia in two damselfly species (Protoneura cara and Ischnura denticollis). Damselflies are suitable for genital allometry tests as their genital function and body size indicators (wing length and head width) are relatively well known and established. First, we show that the aedeagus is used to physically remove sperm from both sperm storage organs (bursa and spermatheca) and that wing length and head width correlate positively with other morphological traits for the two study species. Second, we estimated genital allometry by measuring aedeagal length, vaginal length, bursal volume, and spermathecal volume. Our results indicate no consistent allometric pattern. Allometry for aedeagal length and vaginal width was not the same. Thus, there was no support for a negative allometric relationship. We urge researchers investigating allometry to look directly at how genitalia function rather than inferring function from allometric relationships only.     

Evolution of ontogeny in the hippopotamus skull: using allometry to dissect developmental change

Allometry describes the effect of size change on aspects of an organism's form and can be used to summarize the developmental history of growing parts of an animal. By comparing how allometric growth differs between species, it is possible to reveal differences in their pathways of development. The ability to compare and categorize developmental change between species is demonstrated here using morphometric methods. This involves the interspecific statistical comparison of a large number of bivariate relationships that summarize ontogenetic trajectories. These linear ontogenetic trajectories can be modified as they evolve in any of three ways: ontogenetic scaling indicative of change in the duration of growth, lateral shifts indicative of changes in prenatal development, and directional change indicative of novel modes of postnatal growth. I apply this analysis to skulls of the common hippopotamus ( Hippopotamus amphibius ) and the pygmy hippopotamus ( Hexaprotodon liberiensis ). The number of allometric changes falling into each category was statistically determined and Jolicoeur's multivariate generalization of simple allometry was used to provide an overview of cranial variation. For these skulls, directional change was not found to be statistically significant, but ontogenetic scaling and lateral shifts were both common. This indicates that conserved patterns of growth covariance (ontogenetic scaling) can be separated from novel or derived patterns (directional change and/or lateral shifts). This study demonstrates that He. liberiensis is not simply an ontogenetically scaled version of its larger relative. The evolutionary implications of allometric growth variation are discussed in the light of these findings and those of other studies.  © 2003 The Linnean Society of London, Biological Journal of the Linnean Society , 2003, 80 , 625–638.     

Evolution of post-weaning skull ontogeny in New World opossums (Didelphidae)

Quantification of mammalian skull development has received much attention in the recent literature. Previous results in different lineages have shown an effect of historical legacy on patterns of skull growth. In marsupials, the skull of adults exhibits high variation across species, principally along a size axis. The development keys of the marsupial skull are fundamental to understanding the evolution of skull function in this clade. Its generally well-resolved phylogeny makes the group ideal for studying macroevolution of skull ontogeny. Here, we tested the hypothesis that ontogenetic similarity is correlated with phylogeny in New World marsupials, so that developmental patterns are expected to be conserved from ancestral opossums. We concatenated our previously published ontogenetic cranial data from several opossum species with new ontogenetic sequences and constructed an allometric space on the basis of a set of comparable cranial linear measurements. In this ontogenetic space, we determined the degree of correspondence of developmental patterns and the phylogeny of the group. In addition, we mapped ontogenetic trajectories onto the opossum phylogeny, treating the trajectories as composite, continuously varying characters. Didelphids differed widely in the magnitude of skull allometry across species. Splanchnocranial components exhibited all possible patterns of inter-specific variation, whereas mandibular variables were predominantly allometrically “positive” and neurocranial components were predominantly allometrically “negative.” The distribution of species in allometric space reflected the compounded effect of phylogeny and size variation characteristic of didelphids. The terminal morphology of related species differed in shape, so their ontogenetic trajectories deviated with respect to that of reconstructed common ancestors in varying degree. Phylogeny was the main factor structuring the allometric space of New World marsupials. Didelphids inherited an ancestral constellation of allometry coefficients without change and retained much of it throughout their lineage history. Conserved allometric values on the nodes splitting placental outgroups and marsupials suggest a developmental basis common to all therians.     

Variation in the ontogenetic allometry of horn length in bovids along a body mass continuum

Allometric relationships describe the proportional covariation between morphological, physiological, or life‐history traits and the size of the organisms. Evolutionary allometries estimated among species are expected to result from species differences in ontogenetic allometry, but it remains uncertain whether ontogenetic allometric parameters and particularly the ontogenetic slope can evolve. In bovids, the nonlinear evolutionary allometry between horn length and body mass in males suggests systematic changes in ontogenetic allometry with increasing species body mass. To test this hypothesis, we estimated ontogenetic allometry between horn length and body mass in males and females of 19 bovid species ranging from ca. 5 to 700 kg. Ontogenetic allometry changed systematically with species body mass from steep ontogenetic allometries over a short period of horn growth in small species to shallow allometry with the growth period of horns matching the period of body mass increase in the largest species. Intermediate species displayed steep allometry over long period of horn growth. Females tended to display shallower ontogenetic allometry with longer horn growth compared to males, but these differences were weak and highly variable. These findings show that ontogenetic allometric slope evolved across species possibly as a response to size‐related changes in the selection pressures acting on horn length and body mass.     

Quantitative genetic variation in static allometry in the threespine stickleback

The common pattern of replicated evolution of a consistent shape-environment relationship might reflect selection acting in similar ways within each environment, but divergently among environments. However, phenotypic evolution depends on the availability of additive genetic variation as well as on the direction of selection, implicating a bias in the distribution of genetic variance as a potential contributor to replicated evolution. Allometry, the relationship between shape and size, is a potential source of genetic bias that is poorly understood. The threespine stickleback, Gasterosteus aculeatus, provides an ideal system for exploring the contribution of genetic variance in body shape allometry to evolutionary patterns. The stickleback system comprises marine populations that exhibit limited phenotypic variation, and young freshwater populations which, following independent colonization events, have often evolved similar phenotypes in similar environments. In particular, stickleback diversification has involved changes in both total body size and relative size of body regions (i.e., shape). In a laboratory-reared cohort derived from an oceanic Alaskan population that is phenotypically and genetically representative of the ancestor of the diverse freshwater populations in this region, we determined the phenotypic static allometry, and estimated the additive genetic variation about these population-level allometric functions. We detected significant allometry, with larger fish having relatively smaller heads, a longer base to their second dorsal fin, and longer, shallower caudal peduncles. There was additive genetic variance in body size and in size-independent body shape (i.e., allometric elevation), but typically not in allometric slopes. These results suggest that the parallel evolution of body shape in threespine stickleback is not likely to have been a correlated response to selection on body size, or vice versa. Although allometry is common in fishes, this study highlights the need for additional data on genetic variation in allometric functions to determine how allometry evolves and how it influences phenotypic evolution.     

Genotype × environment interaction in the allometry of body,genitalia and signal traits in Enchenopa treehoppers (Hemiptera: Membracidae)

Developmental plasticity may promote divergence by exposing genetic variation to selection in novel ways in new environments. We tested for this effect in the static allometry (i.e. scaling on body size) of traits in advertisement signals, body and genitalia. We used a member of the Enchenopa binotata species complex of treehoppers – a clade of plant‐feeding insects in which speciation is associated with colonization of novel environments involving marked divergence in signals, subtle divergence in body size and shape, and no apparent divergence in genitalia. We found no change in mean allometric slopes across environments, but substantial genetic variation and genotype × environment interaction (G × E) in allometry. The allometry of signal traits showed the most genetic variation and G × E, and that of genitalia showed the weakest G × E. Our findings suggest that colonizing novel environments may have stronger diversifying consequences for signal allometry than for genitalia allometry. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 105 , 187–196.     

The geographic structure of morphological variation in eight species of fiddler crabs (Ocypodidae: genus Uca) from the eastern United States and Mexico

Species with larger geographic distributions are more likely to encounter a greater variety of environmental conditions and barriers to gene flow than geographically‐restricted species. Thus, even closely‐related species with similar life‐history strategies might vary in degree and geographic structure of variation if they differ in geographic range size. In the present study, we investigated this using samples collected across the geographic ranges of eight species of fiddler crabs (Crustacea: Uca) from the Atlantic and Gulf coasts of North America. Morphological variation in the carapace was assessed using geometric morphometric analysis of 945 specimens. Although the eight Uca species exhibit different degrees of intraspecific variation, widespread species do not necessarily exhibit more intraspecific or geographic variation in carapace morphology. Instead, species with more intraspecific variation show stronger morphological divergence among populations. This morphological divergence is partly a result of allometric growth coupled with differences in maximum body size among populations. On average, 10% of total within‐species variation is attributable to allometry. Possible drivers of the remaining morphological differences among populations include gene flow mediated by ocean currents and plastic responses to various environmental stimuli, with isolation‐by‐distance playing a less important role. The results obtained indicate that morphological divergence among populations can occur over shorter distances than expected based on dispersal potential. © 2010 The Linnean Society of London, Biological Journal of the Linnean Society, 2010, 100 , 248–270.     

An ontogenetic perspective on the study of sexual dimorphism, phylogenetic variability, and allometry of the skull of European ground squirrel, Spermophilus citellus (Linnaeus, 1766)

Most studies of morphological variability in or among species are performed on adult specimens. However, it has been proven that knowledge of the patterns of size and shape changes and their covariation during ontogeny is of great value for the understanding of the processes that produce morphological variation. In this study, we investigated the patterns of sexual dimorphism, phylogenetic variability, and ontogenetic allometry in the Spermophilus citellus with geometric morphometrics applied to cross-sectional ontogenetic data of 189 skulls from three populations (originating from Burgenland, Banat, and Dojran) belonging to two phylogenetic lineages (the Northern and Southern). Our results indicate that sexual dimorphism in the ventral cranium of S. citellus is expressed only in skull size and becomes apparent just before or after the first hibernation because of accelerated growth in juvenile males. Sexes had the same pattern of ontogenetic allometry. Populations from Banat and Dojran, belonging to different phylogroups, were the most different in size but had the most similar adult skull shape. Phylogenetic relations among populations, therefore, did not reflect skull morphology, which is probably under a significant influence of ecological factors. Populations had parallel allometric trajectories, indicating that alterations in development probably occur prenatally. The species’ allometric relations during cranial growth showed characteristic nonlinear trajectories in the two northern populations, with accelerated shape changes in juveniles and continued but almost isometric growth in adults. The adult cranial shape was reached before sexual maturity of both sexes and adult size after sexual maturity. The majority of shape changes during growth are probably correlated with the shift from a liquid to a solid diet and to a lesser degree due to allometric scaling, which explained only 20 % of total shape variation. As expected, viscerocranial components grew with positive and neurocranial with negative allometry.