A method to measure the interaction of Rac/Cdc42 with their binding partners using fluorescence resonance energy transfer between mutants of green fluorescent protein

Enhanced blue fluorescent protein (EBFP) and enhanced green fluorescent protein (EGFP) mutants of GFP in close proximity to one another can act as a fluorescence resonance energy transfer (FRET) pair. Unstructured amino acid linkers of varying length were inserted between EBFP and EGFP, revealing that linkers even as long as 50 amino acids can be accommodated and still allow FRET to occur. This led to the development of a novel biosensor for Rac/Cdc42 binding to their effector proteins based on the insertion of amino acids 75-118 of p21-activated kinase (PAK) between the GFP mutants. We demonstrate that this protein construct allows significant FRET between EBFP and EGFP and retains the ability to bind to Rac in its GTP-bound form with a binding affinity similar to the uncomplexed PAK fragment, and furthermore, on binding to Rac or Cdc42 a marked change in FRET takes place. This forms the basis for a simple, sensitive, and rapid method to measure binding of Rac/Cdc42 to their effector proteins. Since the signal is dependent upon the interaction with active GTP-bound forms it acts as a biosensor for the activation of Rac/Cdc42. It has the potential for use in live cells and for identifying localization of Rac/Cdc42 within subcellular compartments.     

Conformations of variably linked chimeric proteins evaluated by synchrotron X-ray small-angle scattering

We constructed chimeric proteins that consist of two green fluorescent protein variants, EBFP and EGFP, connected by flexible linkers, (GGGGS)n (n = 3 approximately 4), and helical linkers, (EAAAK)n (n = 2 approximately 5). The conformations of the chimeric proteins with the various linkers were evaluated using small-angle X-ray scattering (SAXS). The SAXS experiments showed that introducing the short helical linkers (n = 2 approximately 3) causes multimerization, while the longer linkers (n = 4 approximately 5) solvate monomeric chimeric proteins. With the moderate-length linkers (n = 4), the observed radius of gyration (R(g)) and maximum dimension (D(max)) were 38.8 A and 120 A with the flexible linker, and 40.2 A and 130 A with the helical linker, respectively. The chimeric protein with the helical linker assumed a more elongated conformation as compared to that with the flexible linker. When the length of the helical linker increased (n = 5), R(g) and D(max) increased to 43.2 A and 140 A, respectively. These results suggest that the longer helix effectively separates the two domains of the chimeric protein. Considering the connectivity of the backbone peptide of the protein, the helical linker seems to connect the two domains diagonally. Surprisingly, the chimeric proteins with the flexible linker exhibited an elongated conformation, rather than the most compact side-by-side conformation expected from the fluorescence resonance energy transfer (FRET) analysis. Furthermore, the SAXS analyses suggest that destabilization of the short helical linker causes multimerization of the chimeric proteins. Information about the global conformation of the chimeric protein is thus be necessary for optimization of the linker design.     

Improved green and blue fluorescent proteins for expression in bacteria and mammalian cells

Fluorescent proteins have become an invaluable tool in cell biology. The green fluorescent protein variant EGFP is especially widely applied. Use of fluorescent proteins, including EGFP, however can be hindered by inefficient protein folding, resulting in protein aggregation and reduced fluorescence. This is especially profound in prokaryotic cells. Furthermore, EBFP, a blue fluorescent variant of EGFP, is rarely used because of its dim fluorescence and fast photobleaching. Thus, efforts to improve properties such as protein folding, fluorescence brightness, and photostability are important. Strongly enhanced green fluorescent (SGFP2) and strongly enhanced blue fluorescent (SBFP2) proteins were created, based on EGFP and EBFP, respectively. We used site-directed mutagenesis to introduce several mutations, which were recently shown to improve the fluorescent proteins EYFP and ECFP. SGFP2 and SBFP2 exhibit faster and more efficient protein folding and accelerated chromophore oxidation in vitro. For both strongly enhanced fluorescent proteins, the photostability was improved 2-fold and the quantum yield of SBFP2 was increased 3-fold. The improved folding efficiency reduced the extent of protein aggregation in Escherichia coli, thereby increasing the brightness of bacteria expressing SGFP2 7-fold compared to the brightness of those expressing EGFP. Bacteria expressing SBFP2 were 16-fold more fluorescent than those expressing EBFP. In mammalian cells, the improvements were less pronounced. Cells expressing SGFP2 were 1.7-fold brighter than those expressing EGFP, which was apparently due to more efficient protein expression and/or chromophore maturation. Mammalian cells expressing SBFP2 were 3.7-fold brighter than cells expressing EBFP. This increase in brightness closely resembled the increase in intrinsic brightness observed for the purified recombinant protein. The increased maturation efficiency and photostability of SGFP2 and SBFP2 facilitate detection and extend the maximum duration of fluorescence imaging.     

Quantitative understanding of the energy transfer between fluorescent proteins connected via flexible peptide linkers

The fusion of different protein domains via peptide linkers is a powerful, modular approach to obtain proteins with new functions. A detailed understanding of the conformational behavior of peptide linkers is important for applications such as fluorescence resonance energy transfer (FRET)-based sensor proteins and multidomain proteins involved in multivalent interactions. To investigate the conformational behavior of flexible glycine- and serine-containing peptide linkers, we constructed a series of fusion proteins of enhanced cyan and yellow fluorescent proteins (ECFP-linker-EYFP) in which the linker length was systematically varied by incorporating between 1 and 9 GGSGGS repeats. As expected, both steady-state and time-resolved fluorescence measurements showed a decrease in energy transfer with increasing linker length. The amount of energy transfer observed in these fusion proteins can be quantitatively understood by simple models that describe the flexible linker as a worm-like chain with a persistence length of 4.5 A or a Gaussian chain with a characteristic ratio of 2.3. The implications of our results for understanding the properties of FRET-based sensors and other fusion proteins with Gly/Ser linkers are discussed.     

Novel fluorescence-based screen to identify small synthetic internal ribosome entry site elements

We report here a novel fluorescent protein-based screen to identify small, synthetic internal ribosome entry site (IRES) elements in vivo. A library of bicistronic plasmids encoding the enhanced blue and green fluorescent proteins (EBFP and EGFP) separated by randomized 50-nucleotide-long sequences was amplified in bacteria and delivered into mammalian cells via protoplast fusion. Cells that received functional IRES elements were isolated using the EBFP and EGFP reporters and fluorescence-activated cell sorting, and several small IRES elements were identified. Two of these elements were subsequently shown to possess IRES activity comparable to that of a variant of the encephalomyocarditis virus IRES element in a context-independent manner both in vitro and in vivo, and these elements functioned in multiple cell types. Although no sequence or structural homology was apparent between the synthetic IRES elements and known viral and cellular IRES elements, the two synthetic IRES elements specifically blocked poliovirus (PV) IRES-mediated translation in vitro. Competitive protein-binding experiments suggested that these IRES elements compete with PV IRES-mediated translation by utilizing some of the same factors as the PV IRES to direct translation. The utility of this fluorescent protein-based screen in identifying IRES elements with improved activity as well as in probing the mechanism of IRES-mediated translation is discussed.     

Increasing the homogeneity, stability and activity of human serum albumin and interferon-alpha2b fusion protein by linker engineering

Previous studies in our laboratory have shown that when the N-terminus of interferon-alpha2b (IFN-alpha2b) was directly fused of to the C-terminus of human serum albumin (HSA), the resultant fusion protein (HSA-IFN-alpha2b) was heterogeneous (migrated as doublets on non-reducing SDS-PAGE) and unstable (prone to form covalent aggregates). The heterogeneity and instability of HSA-IFN-alpha2b was ascribed to the structural disturbance between HSA and IFN-alpha2b. To alleviate such structural disturbance, linkers with different lengths (1, 2, 5, 10 amino acid residues) or different conformation (flexible linker (FL, GGGGS), rigid linker (RL, PAPAP) or helix-forming linker (HL, AEAAAKEAAAKA)) were inserted between HSA and IFN-alpha2b. It was demonstrated that linker with 5 amino acid residues was sufficient to separated HSA and IFN-alpha2b effectively, as fusion protein with this linker migrated as single band on non-reducing SDS-PAGE. The fusion proteins with FL, RL and HL linkers were purified to homogeneity with yields of 20%, while the recovery rate of HSA-IFN-alpha2b was only 10%. Accelerated thermal stress tests showed that in contrast to HSA-IFN-alpha2b, fusion proteins with FL, RL and HL linkers were free of aggregates after stored at 37 degrees C for 10 days. Stability tests also revealed that fusion proteins with FL, RL and HL linkers had different susceptibility to hydrolysis, with HSA-RL-IFN-alpha2b being the least susceptible to hydrolysis at pH 6 and 7. Activity assay revealed that the insertion of FL, RL and HL linkers increased the anti-viral activity of fusion protein by 39%, 68% and 115%, respectively.     

An analysis of protein domain linkers: their classification and role in protein folding

Recent advances in protein engineering have come from creating multi-functional chimeric proteins containing modules from various proteins. These modules are typically joined via an oligopeptide linker, the correct design of which is crucial for the desired function of the chimeric protein. Here we analyse the properties of naturally occurring inter-domain linkers with the aim to design linkers for domain fusion. Two main types of linker were identified; helical and non-helical. Helical linkers are thought to act as rigid spacers separating two domains. Non-helical linkers are rich in prolines, which also leads to structural rigidity and isolation of the linker from the attached domains. This means that both linker types are likely to act as a scaffold to prevent unfavourable interactions between folding domains. Based on these results we have constructed a linker database intended for the rational design of linkers for domain fusion, which can be accessed via the Internet at http://mathbio.nimr.mrc.ac.uk.     

Folding properties of the hepatitis B core as a carrier protein for vaccination research

The hepatitis B core (HBc) protein has been used successfully in numerous experiments as a carrier for heterologous peptides. Folding and capsid formation of the chimeric proteins is not always achieved easily. In silico analyses were performed to provide further comprehension of the feasibility for predicting successful capsid formation. In contrast to previous work, we show that common in silico predictions do not ensure assembly into particles. We included new considerations regarding capsid formation of HBc fusion proteins. Not only the primary sequence and the length of the inserts seem important, also the rigidity, the distance between the N and the C-terminus and the presence of cysteines, which could form disulphide bonds, could influence proper capsid formation. Furthermore, new conformational insights were formulated when linkers were added to create extra flexibility of the chimeric particles. Different hypotheses were suggested to clarify the obtained results. To this extent, the addition of glycine-rich linkers could lower high rigidity of the insert, removal of the strain of the core protein or ease interaction between the HBc and the insert. Finally, we observed specific changes in capsid formation properties when longer linkers were used. These findings have not been reported before in this and other virus-like particle carriers. In this study, we also propose a new high-yield purification protocol for fusion proteins to be used in vaccination experiments with the carrier protein or in comparative studies of particulate or non-particulate HBc fusion proteins.     

Properties of the nonhelical end domains of vimentin suggest a role in maintaining intermediate filament network structure

To investigate the functional role of the nonhelical domains of the intermediate filament (IF) protein vimentin, we carried out transient transfection of constructs encoding fusion proteins of these domains with enhanced green fluorescent protein (EGFP). Expression of these fusion proteins did not have any effect on the endogenous IF networks of transfected cells. However, the head domain-EGFP fusion protein localized almost exclusively to the nucleus. This localization could be disrupted in a reversible fashion by chilling cells. Furthermore, the head domain was capable of targeting to the nucleus a strictly cytoplasmic protein, pyruvate kinase. Thus, the vimentin head domain contains information that specifically directs proteins into the nucleus. In contrast, the nonhelical tail domain of vimentin, when expressed as a fusion protein with EGFP, was retained in the cytoplasm. Cytoplasmic retention of tail domain-containing fusion proteins appeared to be dependent on the integrity of the microtubule network. Our results are consistent with a proposal that the nonhelical end domains of vimentin are involved in maintaining an extended IF network by exerting oppositely directed forces along the filaments. The head domains exert a nuclear-directed force while the tail domains extend the IF network toward the cell periphery via a microtubule-dependent mechanism.     

Fluorolabeling of antibody variable domains with green fluorescent protein variants: application to an energy transfer-based homogeneous immunoassay

A site-specific and efficient fluorolabeling of antibody variable regions with green fluorescent protein (GFP) variants and its application to an energy transfer-based homogeneous fluoroimmunoassay (open sandwich FIA) were attempted. Two chimeric proteins, Trx-V(H)-EBFP and Trx-V(L)-EGFP, consisting of V(H) and V(L) fragments of anti-hen egg lysozyme (HEL) antibody HyHEL-10 and two GFP color variants, EBFP and EGFP, respectively, were designed to be expressed in cytoplasm of trxB - mutant Escherichia coli as fusions with thioredoxin from E.coli The mixture of two proteins could be purified with HEL-affinity chromatography, retaining sufficient intrinsic fluorescence and binding activity to HEL. A significant increase in fluorescence resonance energy transfer (FRET) dependent on HEL concentration was observed, indicating the reassociation of the V(H) and V(L) domains of these chimeric proteins due to co-existing antigen. With this open sandwich FIA, an HEL concentration of 1-100 microg/ml could be non-competitively determined. The assay could be performed in a microplate format and took only a few minutes to obtain a sufficient signal after simple mixing of the chimeric proteins with samples. This represents the first demonstration that the FRET between GFP variants is applicable to homogeneous immunoassay.     

Linkers in the structural biology of protein–protein interactions

Linkers or spacers are short amino acid sequences created in nature to separate multiple domains in a single protein. Most of them are rigid and function to prohibit unwanted interactions between the discrete domains. However, Gly‐rich linkers are flexible, connecting various domains in a single protein without interfering with the function of each domain. The advent of recombinant DNA technology made it possible to fuse two interacting partners with the introduction of artificial linkers. Often, independent proteins may not exist as stable or structured proteins until they interact with their binding partner, following which they gain stability and the essential structural elements. Gly‐rich linkers have been proven useful for these types of unstable interactions, particularly where the interaction is weak and transient, by creating a covalent link between the proteins to form a stable protein–protein complex. Gly‐rich linkers are also employed to form stable covalently linked dimers, and to connect two independent domains that create a ligand‐binding site or recognition sequence. The lengths of linkers vary from 2 to 31 amino acids, optimized for each condition so that the linker does not impose any constraints on the conformation or interactions of the linked partners. Various structures of covalently linked protein complexes have been described using X‐ray crystallography, nuclear magnetic resonance and cryo‐electron microscopy techniques. In this review, we evaluate several structural studies where linkers have been used to improve protein quality, to produce stable protein–protein complexes, and to obtain protein dimers.     

重组单链抗体-低分子质量尿激酶融合蛋白在 CHO 细胞中的抗降解研究

抗人纤维蛋白单链抗体-低分子质量尿激酶(Ⅱn-UK)融合蛋白,兼有单链抗体对纤维蛋白的亲和性和尿激酶的溶栓活性,有望开发成为新型导向溶栓药物.但基于通用连接肽(G4S)3的Ⅱn-linker-UK融合蛋白在CHO细胞中表达时出现明显的降解.为了解决此问题,利用分子生物学方法,对Hn-UK融合蛋白进行了分子改造,包括置换连接肽,改变两个半分子(moiety)的相对位置,以及对连接肽附近明确的蛋白酶位点进行突变等方法,并分别研究了改造后的11种Ⅱn-1inker-UK或UK-linker-Ⅱn突变体在CHO细胞中分泌性表达时的稳定性,最终筛选到一种抗降解的突变体.     

Cell-surface modification of non-GMO without chemical treatment by novel GMO-coupled and -separated cocultivation method

We developed a novel method to coat living non-genetically modified (GM) cells with functional recombinant proteins. First, we prepared GM yeast to secrete constructed proteins that have two domains: a functional domain and a binding domain that recognizes other cells. Second, we cocultivated GM and non-GM yeasts that share and coutilize the medium containing recombinant proteins produced by GM yeasts using a filter-membrane-separated cultivation reactor. We confirmed that GM yeast secreted enhanced green fluorescent protein (EGFP) fusion proteins to culture medium. After cocultivation, EGFP fusion proteins produced by GM yeast were targeted to non-GM yeast (Saccharomyces cerevisiae BY4741ΔCYC8 strain) cell surface. Yeast cell-surface engineering is a useful method that enables the coating of GM yeast cell surface with recombinant proteins to produce highly stable and accumulated protein particles. The results of this study suggest that development of cell-surface engineering from GM organisms (GMOs) to living non-GMOs by our novel cocultivation method is possible.     

Comparison of IRES and F2A-based locus-specific multicistronic expression in stable mouse lines

Efficient and stoichiometric expression of genes concatenated by bi- or multi-cistronic vectors has become an invaluable tool not only in basic biology to track and visualize proteins in vivo, but also for vaccine development and in the clinics for gene therapy. To adequately compare, in vivo, the effectiveness of two of the currently popular co-expression strategies - the internal ribosome entry site (IRES) derived from the picornavirus and the 2A peptide from the foot-and-mouth disease virus (FDMV) (F2A), we analyzed two locus-specific knock-in mouse lines co-expressing SRY-box containing gene 9 (Sox9) and enhanced green fluorescent protein (EGFP) linked by the IRES (Sox9(IRES-EGFP)) or the F2A (Sox9(F2A-EGFP)) sequence. Both the constructs expressed Sox9 and EGFP proteins in the appropriate Sox9 expression domains, with the IRES construct expressing reduced levels of EGFP compared to that of the F2A. The latter, on the other hand, produced about 42.2% Sox9-EGFP fusion protein, reflecting an inefficient ribosome 'skipping' mechanism. To investigate if the discrepancy in the 'skipping' process was locus-dependent, we further analyzed the FLAG(3)-Bapx1(F2A-EGFP) mouse line and found similar levels of fusion protein being produced. To assess if EGFP was hindering the 'skipping' mechanism, we examined another mouse line co-expressing Bagpipe homeobox gene 1 homolog (Bapx1), Cre recombinase and EGFP (Bapx1(F2A-Cre-F2A-EGFP)). While the 'skipping' was highly efficient between Bapx1 and Cre, the 'skipping' between Cre and EGFP was highly inefficient. We have thus demonstrated in our comparison study that the efficient and close to equivalent expression of genes linked by F2A is achievable in stable mouse lines, but the EGFP reporter may cause undesirable inhibition of the 'skipping' at the F2A sequence. Hence, the use of other reporter genes should be explored when utilizing F2A peptides.     

Detection of an interaction between prion protein and neuregulin I-β1 by fluorescence resonance energy transfer analysis

Cellular prion protein (PrP) copurifies with neuregulin type I-β1 (NRG I-β1), but no interaction has been detected by a general immunoprecipitation study. We speculate that PrP interacts with NRG I-β1. Here, the interaction of PrP with NRG I-β1 was detected by measuring fluorescence resonance energy transfer (FRET) between enhanced blue (EBFP) and enhanced green (EGFP) fluorescent protein-fusion proteins. Full-length PrP interacted with EGFP in addition to NRG I-β1. From this result, we deduced that PrP interacts with EGFP through its unstructured N-terminal domain. We therefore detected FRET between PrP deleting the N-terminal domain and NRG I-β1. In contrast, the C-terminal domain of PrP interacted with NRG I-β1 and the proteins dissociated completely in the presence of sodium chloride. This interaction occurs at the nanomolar level, which is important for the reaction to be functional in organisms. We concluded that PrP interacted with NRG I-β1 through its C-terminal domain.     

Length requirements for membrane fusion of influenza virus hemagglutinin peptide linkers to transmembrane or fusion peptide domains

During membrane fusion, the influenza A virus hemagglutinin (HA) adopts an extended helical structure that contains the viral transmembrane and fusion peptide domains at the same end of the molecule. The peptide segments that link the end of this rod-like structure to the membrane-associating domains are approximately 10 amino acids in each case, and their structure at the pH of fusion is currently unknown. Here, we examine mutant HAs and influenza viruses containing such HAs to determine whether these peptide linkers are subject to specific length requirements for the proper folding of native HA and for membrane fusion function. Using pairwise deletions and insertions, we show that the region flanking the fusion peptide appears to be important for the folding of the native HA structure but that mutant proteins with small insertions can be expressed on the cell surface and are functional for membrane fusion. HA mutants with deletions of up to 10 residues and insertions of as many as 12 amino acids were generated for the peptide linker to the viral transmembrane domain, and all folded properly and were expressed on the cell surface. For these mutants, it was possible to designate length restrictions for efficient membrane fusion, as functional activity was observed only for mutants containing linkers with insertions or deletions of eight residues or less. The linker peptide mutants are discussed with respect to requirements for the folding of native HAs and length restrictions for membrane fusion activity.     

Intracellular trafficking of a tagged and functional mammalian olfactory receptor

Tagged G‐protein‐coupled receptors (GPCRs) have been used to facilitate intracellular visualization of these receptors. We have used a combination of adenoviral vector gene transfer and tagged olfactory receptors to help visualize mammalian olfactory receptor proteins in the normal olfactory epithelium of rats, and in cell culture. Three recombinant adenoviral vectors were generated carrying variously tagged versions of rat olfactory receptor I7. The constructs include an N‐terminal Flag epitope tag (Flag:I7), enhanced green fluorescent protein (EGFP) fusion protein (EGFP:I7), and a C‐terminal EGFP fusion (I7:EGFP). These receptor constructs were assayed in rat olfactory sensory neurons (OSNs) and in a heterologous system (HEK 293 cell line) for protein localization and functional expression. Functional expression of the tagged receptor proteins was tested by electroolfactogram (EOG) recordings in the infected rat olfactory epithelium, and by calcium imaging in single cells. Our results demonstrate that the I7:EGFP fusion protein and Flag:I7 are functionally expressed in OSNs while the EGFP:I7 fusion is not, probably due to inappropriate processing of the protein in the cells. These data suggest that a small epitope tag (Flag) at the N‐terminus, or EGFP located at the C‐terminus of the receptor, does not affect ligand binding or downstream signaling. In addition, both functional fusion proteins (Flag:I7 and I7:EGFP) are properly targeted to the plasma membrane of HEK 293 cells. © 2002 Wiley Periodicals, Inc. J Neurobiol 50: 56–68, 2002     

多聚精氨酸融合增强型绿色荧光蛋白制备方法及穿膜效果

为了方便细胞穿膜肽R9融合蛋白的可溶性表达及功能上的研究,构建了pSUMO (小分子泛素样修饰蛋白) -R9-EGFP (增强型绿色荧光蛋白) 原核表达载体。分别纯化EGFP及R9-EGFP蛋白后,作用于HepG2,细胞经流式细胞仪及激光共聚焦检测R9细胞穿膜肽的作用效果。实验结果显示在SUMO分子伴侣的作用下,R9-EGFP融合蛋白获得可溶性表达。经流式细胞仪检测,R9细胞穿膜肽可以快速有效的携带目的蛋白进入细胞内部且呈时间、剂量依赖性,大约1.5 h以后荧光强度进入平台期。共聚焦显微镜检测结果表明R9细胞穿膜肽可以有效携带EGFP进入HepG2细胞,并显示主要聚集在细胞浆内。同时体外经肝素抑制实验显示,肝素抑制R9-EGFP穿膜的效率达到50％。这些结果表明,可以利用pSUMO-R9/Ni-NTA表达纯化系统,快速、有效地表达出可溶性多聚精氨酸融合蛋白,同时R9细胞穿膜肽可以有效地携带目的蛋白进入细胞内,为进一步研究多聚精氨酸的穿膜机制提供了基础。     

Linkers for improved cleavage of fusion proteins with an engineered alpha-lytic protease.

Addition of an N-terminal fusion partner can greatly aid the expression and purification of a recombinant protein in Escherichia coli. We investigated two genetically engineered proteases designed to remove the fusion partner after the protein of interest has been expressed. Recombinant human insulin-like growth factor-II (hIGF-II) has been produced from E. coli-derived fusion proteins using a novel enzymatic cleavage system that uses a mutant of alpha-lytic protease. Initially, two potential fusion protein linkers were designed, Pro-Ala-Pro-His (PAPH) and Pro-Ala-Pro-Met (PAPM), and were tested as substrates in the form of synthetic dodecapeptides. Using mass spectrometry and reverse-phase HPLC, the position of cleavage was confirmed and the kinetics of synthetic peptide cleavage were examined. Use of the linkers in hIGF-II fusion proteins produced in E. coli was then evaluated. The fusion proteins constructed consist of the first 11 amino acids of porcine growth hormone linked N-terminally to hIGF-II by six amino acids that include the dipeptide Val-Asn followed by a variable tetrapeptide protease cleavage motif. Mass spectrometry and N-terminal sequencing confirmed that proteolytic cleavage of the fusion proteins had occurred at the predicted sites. Using the fusion proteins as substrates, the cleavage of the rationally designed motifs by the alpha-lytic protease mutant was compared. The fusion protein containing the motif PAPM had a k(cat)/K(M) ratio indicating a 1.6-fold preference over the PAPH fusion protein for cleavage by this enzyme. Furthermore, when hIGF-II fusion proteins containing the designed cleavable linkers were processed with the engineered alpha-lytic protease, they gave greatly improved yields of native hIGF-II compared to an analogous fusion protein cleaved by H64A subtilisin. Comparison of the peptide and protein cleavage studies shows that the efficient proteolysis of the cleavage motifs is an inherent property of the designed sequences and is not determined by secondary or tertiary structure in the fusion proteins.     

Kinetics of the intramolecular disulfide exchange between the periplasmic domains of DsbD

DsbD from Escherichia coli catalyzes the transport of electrons from cytoplasmic thioredoxin to the periplasmic substrate proteins DsbC, DsbG and CcmG. DsbD consists of a periplasmic, N-terminal domain (nDsbD), a central transmembrane domain and a periplasmic, C-terminal domain (cDsbD). Each of these domains contains two essential cysteine residues that are required for intermolecular disulfide exchange between DsbD and substrates, and intramolecular disulfide exchange between the three DsbD domains. In order to determine the rate of intramolecular electron transfer from cDsbD to nDsbD, we constructed a redox-sensitive tryptophan variant of cDsbD (cDsbD(W)) that shows an approximately threefold increase in fluorescence upon reduction and has the same redox potential and reactivity as wild-type cDsbD. cDsbD(W) was then used for the construction of fusion proteins with nDsbD and cDsbD(W), connected via flexible linkers of different length. Using the DsbD substrate DsbC, which can only be reduced by nDsbD and does not react with cDsbD, we could directly measure the intramolecular electron transfer from cDsnD(W) to nDsbB in the fusion proteins. We show that the intramolecular disulfide exchange is significantly faster than the reaction between isolated nDsbD and cDsbD. Nevertheless, the effective concentration of 0.2 mM of the domains in the fusions is comaparably low. The rate of 23 s(-1) for the intramolecular disulfide exchange in the fusions was independent of the linker length and may represent the upper limit for the substrate turnover of full-length DsbD.