<Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of the medicinal plant <Emphasis Type="Italic">Centaurea montana</Emphasis>

An efficient transformation system was developed for Centaurea montana by co-cultivation of leaf explants with Agrobacterium tumefaciens strain AGL1 that contained a plasmid harboring the isopentenyl transferase gene under the control of the developmentally regulated Atmyb32 promoter of Arabidopsis thaliana and the gene encoding for hygromycin resistance under the control of the Cauliflower Mosaic Virus 35S (CaMV35S) promoter. A total of 990 explants were infected with Agrobacterium, and 18 shoots were regenerated resulting in an overall transformation efficiency of 1.8%. Molecular analyses, including PCR, Southern blotting and RT-PCR, were performed on T₀ and T₁ plants to confirm chromosomal integration and expression of the transgene in the phenotypically normal transformed plants. Transformation of C. montana was also performed using A. tumefaciens supervirulent strain EHA105 harboring the β-glucuronidase (GUS) reporter gene. Expression of the GUS gene in the putative transgenics was confirmed using a histochemical GUS assay.     

Applications of whole-cell bacterial sensors in biotechnology and environmental science

Biosensors have major advantages over chemical or physical analyses with regard to specificity, sensitivity, and portability. Recently, many types of whole-cell bacterial biosensors have been developed using recombinant DNA technology. The bacteria are genetically engineered to respond to the presence of chemicals or physiological stresses by synthesizing a reporter protein, such as luciferase, β-galactosidase, or green fluorescent protein. In addition to an overview of conventional biosensors, this minireview discusses a novel type of biosensor using a photosynthetic bacterium as the sensor strain and the crtA gene, which is responsible for carotenoid synthesis, as the reporter. Since bacteria possess a wide variety of stress-response mechanisms, including antioxidation, heat-shock responses, nutrient-starvation, and membrane-damage responses, DNA response elements for several stress-response proteins can be fused with various reporter genes to construct a versatile set of bacterial biosensors for a variety of analytes. Portable biosensors for on-site monitoring have been developed using a freeze-dried biosensing strain, and cell array biosensors have been designed for high-throughput analysis. Moreover, in the future, the use of single-cell biosensors will permit detailed analyses of samples. Signals from such sensors could be detected with digital imaging, epifluorescence microscopy, and/or flow cytometry.     

New family of biosensors for monitoring BTX in aquatic and edaphic environments

Benzene, toluene, ethylbenzene and xylenes (BTEX) contamination is a serious threat to public health and the environment, and therefore, there is an urgent need to detect its presence in nature. The use of whole‐cell reporters is an efficient, easy‐to‐use and low‐cost approach to detect and follow contaminants outside specialized laboratories; this is especially important in oil spills that are frequent in marine environments. The aim of this study is the construction of a bioreporter system and its comparison and validation for the specific detection of monocyclic aromatic hydrocarbons in different host bacteria and environmental samples. Our bioreporter system is based on the two component regulatory system TodS–TodT of P. putida DOT‐T1E, and the P_todX promoter fused to the GFP protein as the reporter protein. For the construction of different biosensors, this bioreporter was transferred into three different bacterial strains isolated from three different environments, and their performance was measured. Validation of the biosensors on water samples spiked with petrol, diesel and crude oil on contaminated waters from oil spills and on contaminated soils demonstrated that they can be used in mapping and monitoring some BTEX compounds (specifically benzene, toluene and two xylene isomers). Validation of biosensors is an important issue for the integration of these devices into pollution‐control programmes.     

Development of replicative <Emphasis Type="Italic">oriC</Emphasis> plasmids and their versatile use in genetic manipulation of <Emphasis Type="Italic">Cytophaga hutchinsonii</Emphasis>

Cytophaga hutchinsonii is a Gram-negative aerobic soil bacterium which can digest crystalline cellulose completely through a strategy different from that of the well-studied cellulolytic aerobic fungi and anaerobic bacteria. However, despite the availability of a published genome sequence, studies on this organism have been very limited because of the lack of a genetic manipulation system. This paper describes the development of replicative oriC plasmids, carrying the replication origin of the C. hutchinsonii chromosome, and an electroporation method for Escherichia coli–C. hutchinsonii shuttle vectors based on oriC plasmids with an efficiency of about 2 × 10⁴ transformants per microgram plasmid DNA. Heterologous proteins, including green fluorescent protein and β-galactosidase, were expressed successfully and proved functional in C. hutchinsonii under the control of the CHU_1284 promoter in oriC plasmids. Finally, the gene CHU_0344, encoding the main extracellular protein, was targeted by homologous recombination based on the oriC plasmid. These genetic techniques and tools will provide a means to study the novel cellulose degradation system of C. hutchinsonii.     

Optimization of biolistic bombardment parameters for <Emphasis Type="Italic">Dendrobium</Emphasis> Sonia 17 calluses using GFP and GUS as the reporter system

Genetic transformation system of Dendrobium Sonia 17 was optimized using green fluorescent protein (GFP) and -glucuronidase (GUS) gene as the reporter systems. The 35S-sgfp-TYG-nos (p35S) and pSMDFR, carrying sgfp and gusA gene, respectively, were co-bombarded into the calluses. Parameters optimized were acceleration pressure, target distance, gold particle size, pre-bombardment cultured time, plasmid DNA precipitation, total plasmid DNA and the ratio of the plasmids co-bombarded. Both reporter systems responded similarly to the bombardment parameters investigated. Based on the GUS/GFP spot counts, the GFP expression rate was higher than that for GUS under the control of the same promoter, CaMV 35S. GFP could be used as the reporter system for the co-bombardment as it was rapid and non-destructive system to monitor the transformed tissues. A combination of GFP and antibiotic resistance gene was used to select stable putative transformants.     

Versatile Escherichia coli Expression Vectors for Production of Truncated Proteins

Several expression vector plasmids containing the tac promoter, the rrnBT₁T₂ terminator, and the pUC ori sequence were constructed. Some of them, the pES series, have a start codon in all three reading frames and multiple cloning sites downstream of the tac promoter and have stop codons also in all three frames and additional stop codons accompanying restriction sites. They are designed for versatile expression of truncated proteins which are produced by deleting portions of the inserted DNA.     

Construction of a Promoter-probe Vector for <Emphasis Type="Italic">Bacillus thuringiensis</Emphasis>: the Identification of <Emphasis Type="Italic">cis</Emphasis>-acting Elements of the <Emphasis Type="Italic">chiA</Emphasis> Locus

The expression and application of Bacillus thuringiensis (Bt) chitinase genes have been extensively investigated. However, little information is available regarding the regulation of chitinase gene expression in Bt. In this study, a shuttle promoter-probe vector was constructed incorporating the thermostable β-galactosidase gene bgaB of B. stearothermophilus as the reporter for the study of Bt promoters. Using this plasmid, the activity of the chiA gene promoter in Bt was investigated. Deletion analysis of the putative chiA promoter region revealed that the sequence located ~75 bp DNA from positions −116 to −42, with respect to the translation start site, is the core promoter of chiA gene. Furthermore, a site for chitin induction was identified near position −36. This site for negative regulation was indicated downstream of the RNA polymerase binding sites of the promoter of chiA. The expression of chiA started in cell grown for about 6 h and reached the maximum after 60 h of incubation. Induction of chiA expression by chitin was demonstrated by an increase in β-galactosidase activity of ~2.5-fold.     

The role of the interdomain B linker in the activation of the XylR protein of Pseudomonas putida

In the presence of toluene and other structural analogues, the enhancer binding protein XylR activates the sigma54 promoter Pu of the TOL (toluene degradation) plasmid pWW0 of Pseudomonas putida. Introduction of amino acid changes Val-219Asp and Ala-220Pro, which enter a proline kink at the interdomain region (B linker) between the A (signal reception) module and the central portion of XylR, originated a protein with unforeseen properties. These included a minor ability to activate Pu in the absence of aromatic effectors, a much higher responsiveness to m-xylene and a significant response to a large collection of aromatic inducers. Such changes could not be attributed to variations in XylR expression levels or to the fortuitous creation of a novel promoter, but to a genuine change in the properties of the activator. Structural predictions suggested that the mutation entirely disrupted an otherwise probable coiled-coil structure. A second directed mutant within the same region consisting of a major replacement of amino acids A220-N221 by the peptide HHHR produced an even more exacerbated phenotype. These data support a model in which the linker B region influences the effector profile by modifying at a distance the operative shape of the effector pocket and fixing the protein in an intermediate step of the activation process.     

Production of the <Emphasis Type="Italic">Aspergillus aculeatus</Emphasis> endo-1,4-β-mannanase in <Emphasis Type="Italic">A. niger</Emphasis>

The β-mannanase gene (man1) from Aspergillus aculeatus MRC11624 (Izuka) was patented for application in the coffee industry. For production of the enzyme, the gene was originally cloned and expressed in Saccharomyces cerevisiae. However the level of production was found to be economically unfeasible. Here we report a 13-fold increase in enzyme production through the successful expression of β-mannanase of Aspergillus aculeatus MRC11624 in Aspergillus niger under control of the A. niger glyceraldehyde-3-phosphate dehydrogenase promoter (gpd _P) and the A. awamori glucoamylase terminator (glaA_T). The effect of medium composition on mannanase production was evaluated, and it was found that the glucose concentration and the organic nitrogen source had an effect on both the volumetric enzyme activity and the specific enzyme activity. The highest mannanase activity levels of 16,596 nkat ml⁻¹ and 574 nkat mg⁻¹ dcw were obtained for A. niger D15[man1] when cultivated in a process-viable medium containing corn steep liquor as the organic nitrogen source and high glucose concentrations.     

Tissue-specific expression of the rolC promoter of the Ri plasmid in transgenic rice plants

Summary Transgenic rice plants were obtained from protoplasts treated with two plasmids by electroporation. Primary transformants were selected on the basis of resistance to hygromycin, conferred by one of the co-transferred plasmids. Out of 26 hygromycin-resistant plants 2 showed the reporter gene activity due to another plasmid possessing a chimeric gene consisting of the promoter (about 900 by upstream non-coding region) of the ORF12 gene (roIC of the Ri plasmid and the coding region for -glucuronidase (GUS). Using a colorimetric reaction, the GUS enzyme was found to be localized in vascular tissues, demonstrating the similar expression of the roIC gene promoter in monocots and dicots (Sugaya et al. 1989; Schmülling et al. 1989).