Synthesis and conformational properties of polypeptides containing long aliphatic side chains. Poly(Nepsilon-stearyl-L-lysine) and poly(Nepsilon-pelargonyl-L-lysine).

Poly(N^ε-stearyl-L -lysine) and poly(N^ε-pelargonyl-L -lysine) were synthesized both by polymerization of N^ε-pelargonyl and N^ε-stearyl-L -lysine NCA and by acylation of poly(L-lysine) with pelargonyl and stearyl chloride. This second route has proven to be very useful, since completely acylated polymers are obtained in almost quantitative yield, whereas the usual scheme of preparation of ε protected poly(L-lysine) cannot easily be applied due to solubility problems. Poly(N^εpelargonyl and stearyl-L -lysine) are soluble in alcohols containing linear aliphatic chains such as n-butanol and n-octanol and in mixtures of these alcohols with hydrocarbons such as n-hexane and n-heptane. Both polymers show an α-helical conformation in the above solvents, which can be disrupted upon addition of sulfuric acid. Also in the solid state, poly(N^ε-stearyl-L -lysine) and poly(N^ε-pelargonyl-L -lysine) show X-ray diffraction patterns typical of order structure.     

Conformational studies of sequential polypeptides containing lysine and tyrosine

The conformation of three sequential copolypeptides, poly(L -tyrosyl-L -lysine), poly(L -tyrosyl-L -lysyl-L -lysine), and poly[L -tyrosyl-(L -lysyl)₂-L -lysine] have been studied by a variety of techniques, including CD, ir spectroscopy, analytical ultracentrifugation, and x-ray diffraction. Depending upon the pH and sovent composition, poly(L -tyrosyl-L lysyl-L -lysine) and poly [L -tyrosyl-(L lysyl)₂-L -lysine] can adopt either the α-helical or random-coil conformation, while poly(L -tyrosyl-L -lysine) forms either inter- or intramolecular β-structures.     

Chemosynthesis of poly(ε-lysine)-analogous polymers by microwave-assisted click polymerization

Poly(ε-lysine) (ε-PL)-analogous click polypeptides with not only similar α-amino side groups but also similar main chain to ε-PL were chemically synthesized for the first time through click polymerization from aspartic (or glutamic)-acid-based dialkyne and diazide monomers. With microwave-assisting, the reaction time of click polymerization was compressed into 30 min. The polymers were fully characterized by NMR, ATR-FTIR, and SEC-MALLS analysis. The deprotected click polypeptides had similar pK(a) value (7.5) and relatively low cytotoxicity as ε-PL and could be used as substitutes of ε-PL in biomedical applications, especially in endotoxin selective removal. Poly(ethylene glycol) (PEG)-containing alternating copolymers with α-amino groups were also synthesized and characterized. After deprotection, the polymers could be used as functional gene vector with PEG shadowing system and NCA initiator to get amphiphilic graft polymers.     

Spin-label studies of the pH-induced random coil to α-helix conformational transition in poly(L-lysine)

Poly(L -lysine) of various molecular weights between 2700 and 475,000 was spin-labeled. From the electron spin resonance spectra, the degree of freedom of the nitroxide was determined by calculation of the rotational correlation time as the poly(L -lysine) underwent the pH-induced random coil to α-helix conformational transition. In general, the rotational correlation time of the nitroxide increased as the pH was increased, indicating a more restricted environment for the spin label when poly(L -lysine) is deprotonated. For the high-molecular-weight poly(L -lysine) this corresponds to the formation of the α-helix and indicates that the side chain–side chain interaction and decreased segmental motion of the backbone (slightly) restricts the motion of the spin label. For the 2700-molecular-weight poly(L -lysine), previously shown not to assume a helical conformation at high pH, the increase in the rotational correlation time of the spin label indicates that the side chain–side chain interaction takes place after deprotonation but without helix formation. This may indicate that helix formation per se is not needed to produce the observed effect even with the high-molecular-weight polymers. The rotational correlation time of the spin label at a particular pH did not depend on the molecular weight of the poly(L -lysine) over the 200-fold range of molecular weights. This indicates that the rotational correlation time reflects the rotational mobility of the spin label in a localized environment and not the rotational diffusion of the entire macromolecule.     

Conformational studies on Cu(II) polycomplexes of pyridoxal Schiff bases of polypeptides

Structures of Cu(II) complexes of pyridoxal Schiff bases with poly(L -lysine), poly(L -ornithine), and poly(L -α,γ-diaminobutyric acid) were investigated by absorption spectra, CD, and conformational analysis. Although the polypeptides retain their typical right-handed α-helical conformation, opposite Cotton effects were found for the poly(L -lysine) and poly(L -ornithine) polycomplexes in the whole range of wavelengths from 600 to 250 nm. As in the analogous derivatives of salicyladehyde, this effect seems to be due to a stereospecific binding of the square planar Cu(II)-bis-pyridoxylideneimine group to the α-helical matrix. Circular dichroism spectrum of poly(L -α,γ-diaminobutyric acid) polycomplex is similar to that found for poly(L -lysine) derivative, but indicates large tetrahedral distortion of the square-planar coordination of copper ion.     

Stability of helical polyamino acids in solution at high temperatures

Optical rotatory dispersion studies have been carried out at temperatures up to 150 °C. on poly(γ-benzyl L -glutamate) in α-chloronaphthalene and N-methylcaprolactam, and on poly-ε-carbobenzoxy-L -lysine, poly-δ-carbobenzoxy-L -ornithine, and poly(L -glutamic acid) in N-methylacetamide. The Moffitt-Yang ?b₀ values were large in all cases, but significant decreases in ?b₀ were observed at the upper temperature limits of the study suggesting that a transition region was being entered. Polymer degradation generally precluded examination of the systems through the suggested transition region.     

Side-chain effect on conformation of ionizable polypeptides in aqueous solution

In order to study the effect of side-chain length on the conformation of polypeptides, conformational changes of various ionic polypeptides with various lengths of side chain, poly-N^ε-glutaryl-L -lysine (PGL), poly-N^δ-glutaryl-L -ornithine (PGO), poly-N^ε-succinyl-L -lysine (PSL), and poly-N^δ-succinyl-L -ornithine (PGO), were investigated by ORD, potentiometric titration, and dilatometric measurements in aqueous solution. The results of optical rotation and potentiometric titration measurements indicate strongly that the α-helix stability increases in the sequence PSO < PSL ～ PGO < PGL, which corresponds to increased side-chain length. The volume change associated with the helix–coil transition also increased in the above sequence. This series of polymers seems to be more hydrophobic compared with poly-L -glutamic acid or poly-L -lysine, as suggested from the values of enthalpy and entropy changes for coil–helix transitions.     

Induced CD and interaction of some porphyrin derivatives with α-helical polypeptides in aqueous solutions

Absorption spectra and induced CD have been measured on aqueous solutions of water-soluble porphyrins with α-helical poly(L -glutamic acid) or α-helical poly (L -lysine) at different mixing ratios. For the former, porphyrin is porphine-meso-tetra (4-N-methylpyridinium) (TMpyP), and for the latter, it is porphine-meso-tetra (4-benzenesulfonate) (TPPS) or porphine-meso-tetra(4-benzoate) (TPPC). All the solutions of porphyrin-polypeptide systems show hypochromism in the Soret band and induced CD in the Soret region. The CD is characterized by a positive band at a shorter wavelength and a stronger negative band at a longer wavelength. The hypochromicity and the magnitude of molar ellipticities are much larger for the TPPS– and TPPC–poly (L -lysine) systems than for the TMpyP–poly (L -glutamic acid) system. Porphyrin ions bind to the α-helix electrostatically, and the two components of the Soret transition of porphyrin are subject to dissymmetric perturbation. TMpyP ions bind to the α-helix at isolated sites, while TPPS ions and TPPC ions are in pairs on the α-helix, that is, two ions bind consecutively and dissymmetrically. In the TMpyP–poly (L -glutamic acid) system a single CD band is associated with each of the two components of the Soret transition, and these are of opposite sign. In the TPPS– and TPPC–poly (L -lysine) systems, a pair of positive and negative CD bands is associated with each of the two components, thus giving apparently a single pair of CD bands with a shoulder, owing to partial overlapping.     

Syntheses and conformational studies of poly(Nε-methyl-L-lysine), poly(Nδ-methyl-L-ornithine), poly(Nδ-ethyl-L-ornithine), and their carbobenzoxy derivatives

The helix–coil transitions of poly(N^ε-methyl, N^ε-carbobenzoxy-L -lysine), poly(N^δ-methyl, N^δ-carbobenzoxy-L -ornithine), and poly(N^δ-ethyl, N^δ-carbobenzoxy-L -ornithine) in chloroform–dichloroacetic acid and their corresponding decarbobenzoxylated polypeptides in alkaline solutions were followed by optical rotation measurements. The introduction of a methyl or an ethyl group to the side chains of the carbobenzoxy derivatives of poly(L -lysine) and poly(L -ornithine) appeared to weaken the helical conformation at 25°C. The thermodynamic quantities of the three water-soluble polypeptides were calculated from the data on potentiometric titrations at several temperatures. For uncharged coil-to-helix transition, ΔH = ?370 cal/mol and ΔS = ?1.1 eu/mol for poly(N^ε-methyl-L -lysine), and ΔH = ?540 cal/mol and ΔS = ?1.6 eu/mol for poly(N^δ-ethyl-L -ornithine) (all on molar residue basis). The absolute values of ΔH and ΔS dropped in the region of pH-induced transition and eventually both quantities became positive. The initiation factor σ was about 2 × 10^?3, which was essentially independent of temperature. For poly(N^δ-methyl-L -ornithine) the coil-to-helix transition was not complete even when the polymer was uncharged at high pH.     

β-Lysine discrimination by lysyl-tRNA synthetase

Elongation factor P is modified with (R)-β-lysine by the lysyl-tRNA synthetase (LysRS) paralog PoxA. PoxA specificity is orthogonal to LysRS, despite their high similarity. To investigate α- and β-lysine recognition by LysRS and PoxA, amino acid replacements were made in the LysRS active site guided by the PoxA structure. A233S LysRS behaved as wild type with α-lysine, while the G469A and A233S/G469A variants decreased stable α-lysyl-adenylate formation. A233S LysRS recognized β-lysine better than wildtype, suggesting a role for this residue in discriminating α- and β-amino acids. Both enantiomers of β-lysine were substrates for tRNA aminoacylation by LysRS, which, together with the relaxed specificity of the A233S variant, suggest a possible means to develop systems for in vivo co-translational insertion of β-amino acids.     

Synthesis and conformational study of poly(N -benzyl-L-lysine) and its benzyloxycarbonyl derivative

The solvent-and pH-induced conformational changes are examined in order to investigate the influence of benzyl group. Polymer was prepared via N^?-benzyloxycarbonyl, N^?-benzyl-N^α-carboxy-L -lysine anhydride. The resulting poly (N^?-benzyloxycarbonyl, N^?-benzyl-L -lysine) was obtained in high yield and had a high molecular weight. The protected polymer was removed into poly (N^?-benzyl-L -lysine) by treating it with hydrogen bromide. From the results of the ORD and CD, the protected polymer has a righthanded α-helix, showing [m′]₂₃₃ = –10,300, [θ]₂₂₀ = –27,600 and [θ]₂₀₇ = –25,100 in dioxane. The breakdown of the helical conformation is found to occur at 8% dichloroacetic acid in chloroform-dichloroacetic acid mixture. In the pH range 3.35–6.90, poly (N^?-benzyl-L -lysine) is in a random coil structure. In the pH range 7.50–13.0, the polypeptide has a right-handed α-helix structure; [m′]₂₃₃ = –12,000, [0]₂₂₀ = –27,200, and [0]₂₀₇ = –27,000. In comparison with poly-L -lysine, the coil-to-helix transition is observed at lower pH range in 50% n-propanol. Above pH 8 by heating, the α ? β transition of poly (N^?-benzyl-L -lysine) is not observed in an aqueous media.     

Ferric complexes of acetoacetyl derivatives of poly(L-lysine), poly(L-ornithine), and poly(L-diaminobutyric acid). II. Conformational properties in solution. Evidence for a stereospecific complex formation

The conformational properties of ferric complexes of poly(N^ε-acetoacetyl-L -lysine), poly(N^δ-acetoacetyl-L -ornithine), and poly(N^γ-acetoacetyl-L -diaminobutyric acid) were investigated in 1:1 water/dioxane by CD techniques. Optical activity was found in the visible and in the uv absorption region of the polymeric complexes. The conformation of the peptide backbone was always that of a right-handed α-helix, and was found independent of the degree of complexation, at least up to a degree of binding of 20%. In the absorption region of the side-chain chromophores the optical activity is substantially affected by complex formation. In all three cases a splitting of the ligand π → π* transition centered at 257 nm is observed. These data suggest a stereospecific complex formation. From the signs of the splitting it also appears that the chirality of the poly(N^δ-acetoacetyl-L -ornithine) complex is opposite that of the other two polymers.     

Analysis of the conformation and thermal stability of the high-affinity IgE Fc receptor β chain polymorphic proteins*

The high-affinity IgE Fc receptor (FcεRI) β chain acts as a signal amplifier through the immunoreceptor tyrosine-based activation motif in its C-terminal intracellular region. Polymorphisms in FcεRI β have been linked to atopy, asthma, and allergies. We investigated the secondary structure, conformation, and thermal stability of FcεRI β polymorphic (β-L172I, β-L174V, and β-E228G) proteins. Polymorphisms did not affect the secondary structure and conformation of FcεRI β. However, we calculated Gibbs free energy of unfolding (ΔG_unf) and significant differences were observed in ΔG_unf values between the wild-type FcεRI β (β-WT) and β-E228G. These results suggested that β-E228G affected the thermal stability of FcεRI β. The role of β-E228G in biological functions and its involvement in allergic reactions have not yet been elucidated in detail; therefore, differences in the thermal stability of β-E228G may affect the function of FcεRI β.     

The tRNA synthetase paralog PoxA modifies elongation factor-P with (R)-β-lysine

The lysyl-tRNA synthetase paralog PoxA modifies elongation factor P (EF-P) with α-lysine at low efficiency. Cell-free extracts containing non-α-lysine substrates of PoxA modified EF-P with a change in mass consistent with addition of β-lysine, a substrate also predicted by genomic analyses. EF-P was efficiently functionally modified with (R)-β-lysine but not (S)-β-lysine or genetically encoded α-amino acids, indicating that PoxA has evolved an activity orthogonal to that of the canonical aminoacyl-tRNA synthetases.     

The thermal induced helix--beta transition of poly(N epsilon-methyl-L-lysine) and poly(N delta-ethyl-L-ornithine) in aqueous solution

Uncharged poly(N^ε-methyl-L -lysine) (PMLL) and its isomer, poly(N^δ-ethyl-L -ornithine) (PELO), in alkaline solution (pH ca. 12) undergo a helix-to-β transition upon mild heating at 50°C or higher in a manner similar to that of poly(L -lysine) (PLL). The rate of conversion follows the order: PMLL < PELO < PLL. The helix can be regenerated upon cooling near zero degrees, for instance, after more than 12 hr at 2°C. At concentrations less than 0.02% the β form is intramolecular, but at higher concentrations both intra- and intermolecular β forms are generated. Poly(N^δ-methyl-L -ornithine) (PMLO), an isomer of PLL, behaves like poly(L -ornithine); uncharged PMLO in alkaline solution is partially helical and becomes disordered at elevated temperatures.     

Spectroscopic studies of random chain and -helical polypeptides in hexafluoroisopropanol

The infrared, ultraviolet, circular dichroism, and optical rotatory dispersion spectra of five synthetic polypeptides dissolved in hexafluoroisopropanol are reported. This solvent is useful because it dissolves most proteins and non-ionic polypeptides and also is transparent in spectral regions critical for polypeptide conformational diagnoses. Poly-γ-morpholinylethyl-L -glutamamide has random chain type spectra in this solvent, whereas the spectra of poly-γ-methyl-L -glutamate, poly-L -methionine, poly-ε, N -Carbo-benzoxy-L -lysine, and poly-L -homoserine indicate that these four polypeptides are α-helical. Small but significant variability between the different α-helical polypeptides is seen in their circular dichroism spectra and optical rotatory dispersions. An argument is presented that these differences may be due to slight geometry differences between different α-helices.     

A Colorimetric Assay of Lipoyl-N-?-Lysine Hydrolysis Activity Using 2,6-Dibromoquinone-4-Chlorimide

Lipoic acid is a coenzyme for pyruvate dehydrogenase, α-ketoglutarate dehydrogenase, branched chain-ketoacid dehydrogenase, and the glycine cleavage system. Lipoic acid is covalently attached through an amide to the ?-amino group of specific lysine residues of these enzymes. Lipoamidase hydrolyzes the amide bond of lipoyl-N-?-lysine. Because of the difficulty in quantitating lipoic acid or lysine released by hydrolysis of lipoyl-N-?-lysine, a sensitive assay of lipoamidase activity was developed based on quantitation of lipoic acid liberated from lipoyl-?-lysine using 2,6-dibromoquinone-4-chlorimide (DBQC). This method involves acidification of the assay mixture with HCl and separation of lipoic acid from lipoyl-N-?-lysine by extraction into ethyl acetate where it can react with DBQC. This method is as sensitive as methods based on the reaction of lipoic acid with dinitrothiobenzoate and requires only a single extraction, but does not require reduction of the disulfide and the color reagent does not need to be prepared daily. Results obtained using this assay to quantitate lipoic acid released from lipoyl-N-p-aminobenzoate correlated excellently with results obtained using the Marshall–Bratton reaction to quantitatep-aminobenzoate. We have detected lipoyl-N-?-lysine hydrolysis activity that is distinct from that of biotinidase and bile salt-stimulated lipase in lymphoblasts from a patient with biotinidase deficiency. This assay can be used to measure lipoyl-N-?-lysine hydrolysis activity in tissues, especially those with little or no biotinidase activity.     

Interactions between mucopolysaccharides and cationic polypeptides in aqueous solution: Chondroitin 4-sulfate and dermatan sulfate

Circular dichroism spectroscopy has been used to study the interactions of both dermatan sulfate and chondroitin 4-sulfate with the cationic polypeptides; poly(L -arginine), poly(L -lysine), and poly(L -ornithine). The results indicate that the mucopolysaccharides have a conformation directing effect on both poly(L -arginine) and poly-(L -lysine) such that these polypeptides adopt the α-helical conformation. The extent of interaction in each polypeptide-polysaccharide system can be judged by the degree of induced helicity and the “melting temperature” at which the interaction is disrupted On comparison of these results with those previously obtained for chondroitin 6-sulfate-polypeptide mixtures, the extent of interaction can be seen to depend on the length of the amino acid side chain and the positions of the anionic groups on the mucopolysaccharide chain. Such considerations place the three mucopolysaccharides in order of increasing interaction: chondroitin 4-sulfate < chondroitin 6-sulfate < dermatan sulfate. These results are correlated with observations that dermatan sulfate is bound more tightly to collagen in connective tissues than are the other two polysaccharides.