Highly active immobilized hydrogenase from Desulfovibrio gigas

The hydrogenase from the sulfate reducer $\text{Desulfovibrio gigas}$ has been immobilized by covalent coupling onto a porous silica support. Two methods have been used: glutaraldehyde activation of aliphatic amino Spherosil and diazotation of aromatic amino Spherosil. The effect of cytochrome C₃ and CC₃ addition during coupling has been investigated. The highest enzymatic activity (4440 U/g support) and immobilization yield (29 %) was obtained when coupling hydrogenase in the presence of cytochrome C₃ or CC₃ with diazotized aromatic amino silica. This immobilized hydrogenase preparation which shows a very good resistance to oxygen inactivation seems suitable for hydrogen photoproduction by coupling with illuminated chloroplasts.     

On the production of dextran by free and immobilized dextransucrase

Dextransucrase from Leuconostoc mesenteroides was produced in a semicontinuous culture with slow addition of a concentrated sucrose solution. The resulting high activity of the fermentation broth allowed a one-step purification method, by gel permeation chromatography (GPC) in 96.4% yield. This procedure resulted in 140-fold purification, with specific activity of 122 U/mg. The enzyme was immobilized onto an amino-Spherosil support activated with glutaraldehyde. Preparations with dextransucrase activities as high as 40.5 U/g of support were obtained, when low specific area supports were used and maltose was added during the enzyme coupling. Diffusional limitations were found during enzyme reaction, as shown by a kinetic study. As a consequence of immobilization, the average molecular weight of dextrans seems to increase. Immobilized dextransucrase looks promising for low-molecular-weight dextran production. Clinical dextran was synthesized when the polysaccharides produced in the presence of maltose were used as acceptor of a second synthesis reaction. The molecular weight distribution of the resulting production was less disperse than when clinical dextran was produced by acid hydrolysis of high-molecular-weight dextran.     

Properties of soluble and immobilized Aspergillus niger β-xylosidase

Aspergillus niger β-xylosidase was characterized when in soluble form and when immobilized to alkylamine porous silica with glutaraldehyde and to alumina with titanium tetrachloride. Energies of activation averaged 13.4 KcaL/mol for the soluble enzyme, 9.0 Kcal/mol when immobilized to alumina, and 8.0 Kcal/mol when bound to silica. The highest activity of all forms of β-xylosidase was found near pH 3. The soluble enzyme was highly stable at pH 4, where lowest rates of decay occurred, and temperature of 65°C and below. The decay rates of alumina-bound β-xylosidase and pH 4 and equivalent temperatures were approximately 10 times as high. Michaells constants were 0.200 and 0.262mM for o-nitrophenyl-β-D -xylopyranoside with soluble and alumina-bound β-xylosidase, respectively.     

Enhanced activity and stability of <Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase by immobilization on aminopropyl glass

Immobilization of Bacillus licheniformis l-arabinose isomerase (BLAI) on aminopropyl glass modified with glutaraldehyde (4 mg protein g support⁻¹) was found to enhance the enzyme activity. The immobilization yield of BLAI was proportional to the quantity of amino groups on the surface of support. Reducing particle size increased the adsorption capacity (q _m) and affinity (k _a). The pH and temperature for immobilization were optimized to be pH 7.1 and 33°C using response surface methodology (RSM). The immobilized enzyme was characterized and compared to the free enzyme. There is no change in optimal pH and temperature before and after immobilization. However, the immobilized BLAI enzyme achieved 145% of the activity of the free enzyme. Correspondingly, the catalytic efficiency (k _cat/K _m) was improved 1.47-fold after immobilization compared to the free enzyme. The thermal stability was improved 138-fold (t _1/2 increased from 2 to 275 h) at 50°C following immobilization.     

Immobilization of Bacillus circulans β-galactosidase and its application in the synthesis of galacto-oligosaccharides under repeated-batch operation

A highly active and stable derivate of immobilized Bacillus circulans β-galactosidase was prepared for the synthesis of galacto-oligosaccharides (GOS) under repeated-batch operation. B. circulans β-galactosidase was immobilized on monofunctional glyoxyl agarose and three heterofunctional supports: amino-, carboxy-, and chelate-glyoxyl agarose. Glyoxyl agarose was the support with highest immobilization yield and stability being selected for the optimization of immobilization conditions and application in GOS synthesis. A central composite rotatable design was conducted to optimize contacted protein and immobilization time, using maximum catalytic potential as the objective function. Optimal conditions of immobilization were 28.9 mg/g and 36.4 h of contact, resulting in a biocatalyst with 595 IU/g and a half-life 89-fold higher than soluble enzyme. Immobilization process did not alter the synthetic capacity of β-galactosidase, obtaining the same GOS yield and product profile than the free enzyme. GOS yield and productivity remained unchanged along 10 repeated batches, with values of 39% (w/w) and 5.7 g GOS/g of biocatalyst·batch. Total product obtained after 10 batches of reaction was 56.5 g GOS/g of biocatalyst (1956 g GOS/g protein). Cumulative productivity in terms of mass of contacted protein was higher for the immobilized enzyme than for its soluble counterpart from the second batch of synthesis onwards.     

Enzymatic hydrolysis of cellulose to glucose lung immobilized β-glucosidase

The production of sugars by enzymatic hydrolysis of cellulose is a multistep process which includes conversion of the intermediate cellobiose to glucose by β-glucosidase. Aside from its role as an intermediate, cellobiose inhibits the endoglucanase components of typical cellulase enzyme systems. Because these enzyme systems often contain insufficient concentrations of β-glucosidase to prevent accumulation of inhibitory cellobiose, this research investigated the use of supplemental immobilized β-glucosidase to increase yield of glucose. Immobilized β-glucosidase from Aspergillus phoenicis was produced by sorption at controlled-pore alumina with about 90% activity retention. The product lost only about 10% of the original activity during an on-stream reaction period of 500 hr with cellobiose as substrate; maximum activity occurred near pH 3.5 and the apparent activation energy was about 11 kcal/mol. The immobilized β-glucosidase was used together with Trichoderma reesei cellulase to hydrolyze cellulosic materials, such as Solka Floc, corn stove and exploded wood. Increased yields of glucose and greater conversions of cellobiose of glucose were observed when the reaction systems contained supplemental immobilized β-glucosidase.     

Immobilization of goat brain aminopeptidase B in calcium alginate beads

Aminopeptidase B, an arginyl aminopeptidase, was purified from goat brain with a purification factor of ～280 and a yield of 2.7%. It was entrapped in calcium alginate together with bovine serum albumin. The optimal conditions for immobilization for maximum activity yield were 1% CaCl₂ and 2.5% alginate. The immobilized enzyme retained ～62% of its initial activity and could be used for five successive batch reactions with retention of 30% of the initial activity. The pH and temperature optima of the free and immobilized enzyme were pH 7.4, 45°C and pH 7.8, 50°C respectively, while the pH and thermal stability as well as the stability of the enzyme in organic solvents were improved significantly after entrapment. The K_m value for the immobilized enzyme was about twofold higher than that of the soluble enzyme. Because of this increased stability, the immobilized enzyme may be useful in the meat processing industry.     

Chemically surface modified gel (CSMG): an excellent enzyme-immobilization matrix for industrial processes

Invertase from S. cerevisiae has been immobilized on porous silica matrix, formed using sol-gel chemistry, with surface area of approximately 650 m(2)/g. The co-condensation of silica sol with 3-aminopropyl(triethoxy)silane produced an amino-chemically surface modified silica gel (N-CSMG) with a very high ligand loading of 3.6 mmol/g SiO(2); significantly higher than commercially available matrices. Surface amine groups were activated with glutaraldehyde to produce GA-N-CSMG, and invertase covalently attached by the aldehyde. Invertase was used as a model enzyme to measure the immobilizing character of the GA-N-CSMG material. Using an optimized immobilization protocol, a very high loading of 723 mg invertase per gram GA-N-CSMG is obtained; 3-200-fold higher than values published in literature. The reproducible, immobilized activity of 246,000 U/g GA-N-CSMG is also greater than any other in literature. Immobilized invertase showed almost 99% retention of free enzyme activity and no loss in catalytic efficiency. The apparent kinetic parameters K(M) and V(M) were determined using the Michealis-Menten kinetic model. K(M) of the free invertase was 1.5 times greater than that of the immobilized invertase--indicating a higher substrate affinity of the immobilized invertase. These findings show considerable promise for this material as an immobilization matrix in industrial processes.     

Immobilization and properties of Leuconostoc mesenteroids dextransucrase

Dextransucrase from Leuconostoc mesenteroides (NRRL B-512F) was purified by ultrafiltration and gel filtration chromatography in 54% yield. The specific activity of a heart cut was 58.6 U/mg; cumulative purification of that preparation was 247?fold. Of 13 carriers surveyed, only alkylamine porous silica gave immobilization efficiencies consistently above 15 %. Immobilization to silica changed the properties of dextransucrase relatively little, the optimum pH for activity remaining at 5.2, while that for stability decreased from pH 5.5?6 to pH 5.2. In short assays, highest activities of both soluble and immobilized dextransucrase occurred at 30°C. Activation energies below that temperature were 8.6 kcal/mol for the former form and 1.7 kcal/mol for the latter. Maximum stabilization of soluble dextransucrase was attained by 5mM Ca²⁺.     

Improved octyl glucoside synthesis using immobilized β-glucosidase on PA-M with reduced glucose surplus inhibition

A β-glucosidase extracted from bitter almond (Prunus dulcis var. amara) was immobilized on polyamine microspheres (PA-M) for catalytic octyl glucoside (OG) synthesis from glucose and octanol through reversed hydrolysis. The immobilization increased the activity of enzyme at pH 6.0–7.0, and the optimal reaction temperature for immobilized enzyme was identical to the free enzyme. The thermal stability and solvent tolerance of enzyme were increased by its immobilization. In the co-solvent system using 10% t-butyl alcohol and 10% (v/v) water, the yield of OG was increased by 1.7-fold compared to the yield from the system without co-solvent. Based on dynamic and Dixon plot analyses, the initial reaction velocity (V₀) increased approximately three-fold on immobilization and the OG synthesis was inhibited by surplus glucose. The inhibition dissociation constants for free and immobilized enzyme were 219?mM and 116?mM, respectively. A fed-batch mode was applied in the OG synthesis to minimize substrate inhibition. After 336?h of reaction, the OG yield and the conversion rate of glucose reached 134?mM and 59.6%, respectively. Compared to the batch operation, the fed-bath operation increased the OG yield and the conversion rate of glucose by 340% and 381%, respectively.     

Covalent coupling method for lipase immobilization on controlled pore silica in the presence of nonenzymatic proteins

Candida rugosa lipase was covalently immobilized on silanized controlled pore silica previously activated with glutaraldehyde in the presence of nonenzymatic proteins. This strategy is suggested to protect the enzyme from aggregation effects or denaturation that occurs as a result of the presence of silane precursors used in the formation of the silica matrix. The immobilization yield was evaluated as a function of the lipase loading and the additive type (albumin and lecithin) using statistical concepts. In agreement with the mathematical model, the maximum coupling yield (32.2%) can be achieved working at high lipase loading (450 units x g(-1) support) using albumin as an additive. In these conditions, the resulting immobilized lipase exhibits high hydrolytic (153.2 U x mg(-1)) and esterification (337.6 mmol x g(-1) x min) activities. The enhanced activity of the final lipase derivative is the sum of the benefits of the immobilization (that prevents enzyme aggregation) and the lipase coating by additives that increases the accessibility of active sites to the substrate.     

Biocatalytic characterization of Aspergillus oryzae β-galactosidase immobilized on functionalized multi-walled carbon nanotubes

The objectives of this work were to immobilize commercial Aspergillus oryzae β-galactosidase on functionalized multi-walled carbon nanotubes (MWCNTs) using different treatments and to characterize the products. Treatments were performed with glutaraldehyde, ethylenediamine and a mixture of concentrated H₂SO₄:HNO₃. The MWCNTs and their derivatives were characterized by thermogravimetric analysis. The immobilized enzymes were evaluated using inactivation kinetics, operating conditions, that is pH and temperature, kinetic parameters and lactose hydrolysis reusability. Immobilization yield and efficiency were significantly higher for β-galactosidase immobilized on MWCNTs functionalized by the acid mixture (Ac-Gal-MWCNTs). These values were 97% and 82%, respectively, after 3?h of immobilization. The activity of the Ac-Gal-MWCNTs was maintained at ～51% of their initial activity after being stored for 90 days at 4?°C. The Ac-Gal-MWCNTs retained more than 90% of their initial activity up to the fourth recycle. As the acid functionalization was the most efficient method tested for immobilizing A. oryzae β-galactosidase on MWCNTs, this method shows promise for industrial applications.     

Multipoint covalent immobilization of microbial lipase on chitosan and agarose activated by different methods

In this work Candida antarctica lipase type B (CALB) was immobilized on agarose and chitosan. The influence of activation agents (glycidol, glutaraldehyde and epichlorohydrin) and immobilization time (5, 24 and 72 h) on hydrolytic activity, thermal and alkaline stabilities of the biocatalyst was evaluated. Protein concentration and enzymatic activity in the supernatant were determined during the immobilization process. More active derivatives were attained when the enzymatic extract was first purified through dialysis. The highest activities achieved were: for agarose-glyoxyl (with glycidol), 845 U/g of gel, after 72 h of immobilization; for chitosan-glutaraldehyde and agarose-glutaraldehyde, respectively, 1209 U/g of gel and 2716 U/g of gel, after 5 h of immobilization. Thermal stability was significantly increased, when compared to the soluble enzyme: 20-fold for agarose-glyoxyl (with glycidol)-CALB, 18-fold for chitosan-glutaraldehyde-CALB and 21-fold for agarose-glutaraldehyde. The best derivative, 58-fold more stable than the soluble enzyme, was obtained when CALB was immobilized on chitosan activated in two steps, using glycidol and glutaraldehyde, 72 h immobilization time. The stabilization degree of the derivative increased with the immobilization time, an indication that a multipoint covalent attachment between enzyme and the support had really occurred.     

Resolution of N-(2-ethyl-6-methylphenyl) alanine by using microgel beads containing Pseudomonas cepacia lipase

Abstract

Pseudomonas cepacia lipase (PCL) was immobilized in alginate microgel beads by electrostatic dispersion. The high electrical potential applied in the immobilization process could significantly decrease the droplet size. The optimum conditions for lipase immobilization were 2% (w/v) alginate, 100 mM CaCl₂, 8 mg/mL enzyme, 4 kV electrical potential and 200 μm mean bead size. Under these conditions, 78.2 U/g of immobilized PCL activity was obtained with 39.1% retained activity and 57.2% immobilization efficiency. The immobilized PCL (PCL-CA) was subsequently used in the enantioselective hydrolysis of (R, S)-N-(2-ethyl-6-methylphenyl) alanine methyl ester. Although PCL-CA exhibited slightly lower activity than free PCL, it preserved the high enantioselectivity (E-value >?200), which afforded enantiomerically pure (R)-acid (99% e.e._p). Furthermore, PCL-CA exhibited higher thermal stability, storage and medium stability than that of free PCL. Batch-wise operational stability studies demonstrated that PCL-CA retained its initial activity for at least 10 cycles of hydrolysis.     

Hydrolysis of lactose in whey permeate by immobilized β-galactosidase from Penicillium notatum

A new low-cost β-galactosidase (lactase) preparation for whey permeate saccharification was developed and characterized. A biocatalyst with a lactase activity of 10 U/mg, a low transgalactosylase activity and a protein content of 0.22 mg protein/mg was obtained from a fermenter culture of the fungus Penicillium notatum. Factors influencing the enzymatic hydrolysis of lactose, such as reaction time, pH, temperature and enzyme and substrate concentration were standardized to maximize sugar yield from whey permeate. Thus, a 98.1% conversion of 5% lactose in whey permeate to sweet (glucose-galactose) syrup was reached in 48 h using 650 β-galactosidase units/g hydrolyzed substrate. After the immobilization of the acid β-galactosidase from Penicillium notatum on silanized porous glass modified by glutaraldehyde binding, more than 90% of the activity was retained. The marked shifts in the pH value (from 4.0 to 5.0) and optimum temperatures (from 50°C to 60°C) of the solid-phase enzyme were observed and discussed. The immobilized preparation showed high catalytic activity and stability at wider pH and temperature ranges than those of the free enzyme, and under the best operating conditions (lactose, 5%; β-galactosidase, 610–650 U/g lactose; pH 5.0; temperature 55°C), a high efficiency of lactose saccharification (84–88%) in whey permeate was achieved when lactolysis was performed both in a batch process and in a recycling packed-bed bioreactor. It seems that the promising results obtained during the assays performed on a laboratory scale make this immobilizate a new and very viable preparation of β-galactosidase for application in the processing of whey and whey permeates.     

Application of multi-component reaction for covalent immobilization of two lipases on aldehyde-functionalized magnetic nanoparticles; production of biodiesel from waste cooking oil

Lipase from Rhizomucor miehei (RML) and Thermomyces lanuginosa lipase (TLL) were immobilized on silica core-shell magnetic nanoparticles (Fe₃O₄@SiO₂) produced by coating Fe₃O₄ core with silica shell. The nanoparticles were functionalized with aldehyde groups followed by immobilization of RML and TLL by using a multi-component reaction in an extremely mild condition. Rapid immobilization of both enzymes (1.5−12 h) with high immobilization yields (81–100%) was observed. The maximum loading capacity of the support was determined to be 81 mg for RML and 97 mg for TLL. The thermal stability of the immobilized derivatives of RML and TLL were greatly improved by retaining 54 and 97 % of their initial activities at 65 °C, respectively. The immobilized preparations were used to produce biodiesel by transesterification of waste cooking oil. In an optimization study, Response Surface Methodology (RSM) and a central composite rotatable design (CCRD) were used to study the effect of amount of biocatalyst, temperature, reaction time, water adsorbent (wt.%) and ratio of t-butanol to oil (wt.%) on the yield of biodiesel production. Biodiesel production yield by immobilized TLL reached 93.1 % under optimal conditions while the maximum yield for RML was 57.5 %. Both immobilized derivatives showed high reusability after 5 cycles of the reaction.     

Fabrication of an organic–inorganic nanocomposite carrier for enzyme immobilization based on metal–organic coordination

An organic–inorganic nanocomposite which combined mesoporous silica SBA-15 and chitosan using a carboxyl functionalized ionic liquid as the bridging agent (SBA@CS) was successfully fabricated, and was used to immobilize porcine pancreas lipase (PPL) by physical adsorption, cross-linking and metal–organic coordination, respectively. The as-prepared carriers were characterized by scanning electron microscopy, Fourier transform infrared and energy-dispersive X-ray spectroscopy. Compared with immobilization onto the pure mesoporous silicon material SBA-15, all the batches of PPL immobilized onto organic–inorganic nanocomposites showed higher activity, improved stability and reusability as well as better resistance to pH and temperature changes. Among the immobilized PPLs, immobilization based on Co²⁺ coordination (SBA@CS-Co-PPL) produced the best enzymatic properties. The maximum immobilization efficiency and specific activity of 79.6% and 1975.8 U g⁻¹ were obtained with SBA@CS-Co, separately. More importantly, the activity of immobilized enzyme can still maintain 84.0% after 10 times of reuse. These results demonstrated that thus prepared organic–inorganic nanocomposite could be an ideal carrier for enzyme immobilization by metal–organic coordination.     

Immobilization of keratinolytic metalloprotease from Chryseobacterium sp. strain kr6 on glutaraldehyde-activated chitosan

Keratinases are exciting keratin-degrading enzymes; however, there have been relatively few studies on their immobilization. A keratinolytic protease from Chryseobacterium sp. kr6 was purified and its partial sequence determined using mass spectrometry. No significant homology to other microbial peptides in the NCBI database was observed. Certain parameters for immobilization of the purified keratinase on chitosan beads were investigated. The production of the chitosan beads was optimized using factorial design and surface response techniques. The optimum chitosan bead production for protease immobilization was a 20 g/l chitosan solution in acetic acid [1.5% (v/v)], glutaraldehyde ranging from 34 g to 56 g/l, and an activation time between 6 and 10 h. Under these conditions, above 80% of the enzyme was immobilized on the support. The behavior of the keratinase loading on the chitosan beads surface was well described using the Langmuir model. The maximum capacity of the support (qm) and dissociation constant (Kd) were estimated as 58.8 U/g and 0.245 U/ml, respectively. The thermal stability of the immobilized enzyme was also improved around 2-fold, when compared with that of the free enzyme, after 30 min at 65 degrees C. In addition, the activity of the immobilized enzyme remained at 63.4% after it was reused five times. Thus, the immobilized enzyme exhibited an improved thermal stability and remained active after several uses.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.     

Immobilization of lipase from Candida rugosa on a polymer support

Lipase from Candida rugosa was immobilized by adsorption onto a macroporous copolymer support. Under optimum conditions the maximum amount of protein bound was 15.4 mg/g and the immobilization efficiency was 62%. The kinetics of lipase binding to the selected polymer carrier was assessed by using a general model of topochemical reactions. The effect of temperature on adsorption was thoroughly investigated, as was the adsorption mechanism itself. Analysis of the proposed kinetic model and the specific kinetic parameters measured suggest that surface kinetics control the adsorption process. According to the activation energy (E _a) and the rate constant, k, the enzyme has rather a high affinity for the support's active sites. The immobilized enzyme was used to catalyse the hydrolysis of palm oil in a lecithin/isooctane reaction system, in which the enzyme's activity was 70% that of the free enzyme. Kinetic parameters such as maximum velocity (V _max) and the Michaelis constant (K _m) were determined for the free and the immobilized lipase. Following repeated use, the immobilized lipase retained 56% of its initial activity after the fifth hydrolysis cycle. Received: 3 April 1998 / Received revision: 28 July 1998 / Accepted: 29 July 1998