Raman spectroscopic study of poly (β-benzyl-L-aspartate) and sequential polypeptides

Poly-β-benzyl-L -aspartate (poly[Asp(OBzl)]) forms either a lefthanded α-helix, β-sheet, ω-helix, or random coil under appropriate conditions. In this paper the Raman spectra of the above poly[Asp(OBzl)] conformations are compared. The Raman active amide I line shifts from 1663 cm^?1 to 1679 cm^?1 upon thermal conversion of poly[Asp(OBzl)] from the α-helical to β-sheet conformation while an intense line appearing at 890 cm^?1 in the spectrum of the α-helix decreases in intensity. The 890 cm^?1 line also displays weak intensity when the polymer is dissolved in chloroform–dichloroacetic acid solution and therefore is converted to the random coil. This line probably arises from a skeletal vibration and is expected to be conformationally sensitive. Similar behavior in the intensity of skeletal vibrations is discussed for other polypeptides undergoing conformational transitions. The Raman spectra of two cross-β-sheet copolypeptides, poly(Ala-Gly) and poly(Ser-Gly), are examined. These sequential polypeptides are model compounds for the crystalline regions of Bombyx mori silk fibroin which forms an extensive β-sheet structure. The amide I, III, and skeletal vibrations appeared in the Raman spectra of these polypeptides at the frequencies and intensities associated with β-sheet homopolypeptides. Since the sequential copolypeptides are intermediate in complexity between the homopolypeptides and the proteins, these results indicate that Raman structure–frequency correlations obtained from homopolypeptide studies can now be applied to protein spectra with greater confidence. The perturbation scheme developed by Krimm and Abe for explaining the frequency splitting of the amide I vibrations in β-sheet polyglycine is applied to poly(L -valine), poly-(Ala-Gly), poly(Ser-Gly), and poly[Asp(OBzl)]. The value of the “unperturbed” frequency, V₀, for poly[Asp(OBzl)] was significantly greater than the corresponding values for the other polypeptides. A structural origin for this difference may be displacement of adjacent hydrogen-bonded chains relative to the standard β-sheet conformation.     

Correlation between the sequence-length distribution and structure of statistical copolymers of L-valine and γ-benzyl-L-glutamate

Statistical copolymers were prepared from N-carboxyanhydrides of L -valine and γ-benzyl-L -glutamate in dioxan with triethylamine as an initiator. The copolymerization conversion was determined by ir spectroscopy, the copolymer composition by amino acid analysis, and the molecular weights by light scattering. The monomer reactivity ratios were found to be r_Val = 0.14 and r_Glu(OBzl) = 6.4. High-molecular-weight copolymers are formed even at low conversions. The content of β-structure in the copolymers was estimated from the ir spectra in copolymerization mixtures. The sequence-length distribution of L -valine and γ-benzyl-L -glutamate copolymers was calculated and its dependence on copolymerization conversion is discussed. Relations between the sequence-length distribution and the content of β-structure were studied. It was found that the content of β-structure in samples with the same composition is different for low- and high-conversion copolymers. The formation of β-structure in copolymers in the copolymerization mixture requires a certain minimal sequence length, which has been found to be about 6 valine units.     

Local conformations of ends of α-helical poly[Glu(OBzl)] studied by circular dichroism of terminal chromophores

Conformations of terminal peptide units of α-helical poly(γ-benzyl-L -glutamate), poly-[Glu(OBzl)], were examined by an induced circular dichroism (CD) of chromophores which were covalently attached to both ends of the chain. In chloroform, where the helical poly-[Glu(OBzl)] exists as a head-to-tail-type dimeric associate, the chromophores showed a strong CD induced by an asymmetric perturbation from the helical structure. The induced CD almost disappeared by an addition of a few percent of dichloroacetic acid, which has been reported as a powerful breaker of the associate. These results are explained by an incorporation of terminal peptide units into a helical conformation in the head-to-tail associate and a local unfolding of the terminal portions by the addition of acid. An induced CD of a charge-transfer complex between the two terminal chromophores was also observed and the structure of the helix–helix junction of the head-to-tail dimer is discussed.     

15N-nmr spectroscopy. 33. Assignments of isotactic and syndiotactic sequences in poly(D,L-amino acids)

¹⁵N-enriched (D ,L -Leu)_n, (γ-OMe-D ,L -Glu)_n, (D ,L -Val)_n, and (D ,L -Phe)_n were prepared, 40.55-MHz ¹⁵N-nmr spectra were measured in various solvents. The signal patterns depend strongly on the nature of the solvent, yet in most cases at least four signals are resolved, representing the four enantiomeric pairs of triads L -L -L (D -D -D ), L -D -L (D -L -D ), L -L -D (D -D -L ), and D -L -L (L -D -D ). Numerous copolypeptides of the general structure (A)_n-B*-(A)_m (the asterisk denotes 40–50% ¹⁵N enrichment) were synthesized and measured as models for syndiotactic sequences in the spectra of poly(D ,L -amino acids). In this way unambiguous assignments for both isotactic and syndiotactic trials were obtained. A spectroscopic rule was established: “isotactic sequences absorb downfield of syndiotactic ones.” Furthermore, the spectra of various types of stereocopolypeptides such as (L -Leu/L -Val)_n and (L -Leu/D -Val)_n were investigated, including the ternary systems (L -Leu/L -Ala/D -Ala)_n (L -Leu/L -Ala/Gly)_n, (L -Leu/D -Ala/Gly)_n, (L -Val/L -Ala/Gly)_n, and (L -Val/D -Ala/Gly)_n. All copolymerization of D - and L -amino acid NCAs investigated in this work showed a low degree of stereoselectivity.     

The random copolymerization of γ-benzyl-L-glutamate and L-valine N-carboxyanhydrides: Reactivity ratio and heteogeneity studies

The random copolymerization of the N-carboxyhydrides of γ-benzyl-L -glutamate and L -valine using triethylamine as the initiator in low dielectric media reults in high-molecular-weight copolymers at low convenrson. This behavior makes it possible to apply the monomer reactivity ration theory, which was dervied for addition polymerizations, and from the use of the copolymer composition equation, the respective monomer reactivity ratios, the average and incremental copolymer compositions, and the monomer feed ratio at any conversion can be determined. A comparison of the reactivity ratios for the copolymerization of γ-benzyl-L -glutamate NCA and L -valine NCA in benzene/methylene chloride (r_G = 2.1, r_V = 0.6) with those obtained using dioxane (r_G = 2.7, r_V = 0.3) indicates that the interchain compositional heterogeneity is greater for copolymers prepared in the dioxane. For Example, at 100% conversion of the monomeric NCAs, Poly[Glu(OBzl)⁵⁰Val⁵⁰] prepared in dioxance has an interchain composition ranging from 74 to 0 mol % γ-benzyl-L -glutamate, whereas in benzene/methylene chloride the interchain composition of γ-benzyl-L -glutamae ranges from 65 to 0 mol %. Once the reactivity ratios are obtained for any pair of α-amino and N-carboxyanhydrides, the use of the aforementioned parameters relating to interchain composition can give insight into the compositional heterogeneity between chains as a function of conversion and provide a basis for the preparation of random α-amino acid copolymers that are homogeneous.     

Rigidity of α-helical polypeptides. A new method of obtaining the persistence length from viscosimetric data

The hydrodynamic properties of α-helical poly(L -glutamic acid), (Glu)_n in aqueous solutions and in mixtures of water with organic solvents have been interpreted in terms of the persistence length of the macromolecule. A modification of the method of Vitovskaya and Tsvetkov has been proposed in order to allow a more accurate determination of this parameter. The addition of an organic solvent increases strongly the rigidity of the helical conformation of (Glu)_n. A comparison is made with some data of the literature of poly[N⁵-(3-hydroxy propyl)L -glutamine], [Gln(CH₂)₃OH]_n, and poly(γ-benzyl-L -glutamate), [Glu(OBzl)]_n.     

Carrier design: Conformational studies of amino acid (X) and oligopeptide (X-DL-Alam) substituted poly(L-lysine)

The present study was undertaken to examine the influence of the reversal of the sidechain sequential order on the conformation of branched polypeptides. At the same time, the influence of the optically active amino acid joined directly to the poly (L -Lys) backbone and the DL -Ala oligomer grafted as chain-terminating fragment were separately analyzed. Therefore two sets of polypeptides were synthesized corresponding to the general formula poly [Lys-(X_i,)] (XK) and poly[Lys-(DL -Ala_m-X_i)] (AXK) when X = Ala, D -Ala, Leu, D -Leu, Phe, D -Phe, Ile, Pro, Glu.,D -Glu, or His. For coupling amino acid X to polylysine, three types of active ester methods were compared: the use of pentafluorophenyl or pentachlorophenyl ester, and the effect of the addition of an equimolar amount of 1-hydroxybenzotriazole. After cleavage of protecting groups, AXK polypeptides were synthesized by grafting short oligo (DL -Ala) chains to XK by using N-carboxy-DL -Ala anhydride. The CD measurements performed in water solutions of various pH values and ionic strengths were used for classification of the polypeptide conformations as either ordered (helical) or unordered. Different from what was observed with the unsubstituted poly (L -Lys), poly[Lys-(X_i)] type polypeptides can adopt ordered structure even under nearly physiological conditions (pH 7.3, 0.2M NaCl). These data suggest that the introduction of amino acid residue with either (ar) alkyl side chain (Ala, Leu, Phe) or negatively charged side chain (Glu) promotes markedly the formation of ordered structure. Comparison of chiroptical properties of poly [Lys- (DL -Ala_m-X_i)] and of poly [Lys- (X_i)] reveals that side-chain interactions play an important role in the stabilization of ordered solution conformation of AXK type branched polypeptides. The results give rather conclusive evidence that not only hydrophobic interactions, but also ionic attraction, can be involved in the formation and stabilization of helical conformation of branched polypeptides. © 1993 John Wiley & Sons, Inc.     

The infuence of interchain compositional heterogeneity on the conformation in random copolymers of γ-benzyl-L-glutamate and L-valine

Variation in the solvent used for the copolymerization of γ-benzyl-L -glutamate and L -valine N-carboxyanhydrides provides copolymers which have variable interchain compositions, and this variation in interchain compositional heterogeneity is reflected in the solid-state conformations of the respective copolymers. Poly[Glu(OBzl)²⁹Val⁷¹] prepared in dioxane exhibits a β-structure, whereas a copolymer of the same average composition prepared in benzene/methylene chloride shows predominantly an β-helix conformation with a small amount of β-structure. The use of the monomer reactivity ratio permits the calculation of the average and incremental copolymer compositions at any conversion; thus, correlations between conformation and interchain compositional heterogeneity can be made. In general, copolymers prepared in dioxane show a greater distribution of chain composition and therefore permit a wider variety of conformation than copolymers prepared in benzene/methylene chloride under identical conditions.     

Chirality of amino acids of microorganisms used in food biotechnology

Bacteria of the genera Acetobacter, Bifidobacterium, Brevibacterium, Lactobacillus, Micrococcus, Propionibacterium, and Streptococcus, which are used as so-called starter cultures for the large-scale production of fermented foods and beverages in food biotechnology, have been investigated for the chirality of their amino acids (AA) by gas chromatography (GC). Bacteria were grown in complex media, centrifuged, and washed with 0.85% aqueous NaCl. Aliquots were totally hydrolyzed (6 M HCl, 110°C, 18 h), or extracted with 70% aqueous ethanol in order to isolated free AA. The AA were adsorbed on Dowex WX 8 cation-exchanger, eluted with 4 M ammonia and converted into their N(O)-trifluoroacetyl(TFA) 2-propyl esters or TFA methyl esters. The AA derivatives were investigated by capillary GC using the chiral stationary phases Chirasil-L -Val, Chirasil-D -Val, and Lipodex E. Besides L -AA, in all bacteria D -amino acids (D -AA) were detected; those in the highest relative amounts were D -Ala and D -Asp (occurring in all bacteria) and, in several cases, D -Glu. Lower, but significant amounts of other D -AA such as D -Ser, D -Pro, D -Val, D -Thr, D -Ile, D -Leu, D -Met, D -Phe, D -Tyr, D -Orn, and D -Lys were also detected in certain bacteria. These findings explain the origin of D -AA found in all fermented foods and drinks produced with the aid of bacterial starter cultures. © 1993 Wiley-Liss, Inc.     

Conformations of a monodisperse homohexapeptide,Nps-[Glu(OBzl)]6-NHEt,and its critical concentration of β-form formation in solution

Nps-[Glu(OBzl)]₆-NHEt has been prepared by coupling Nps-[Glu(OBzl)]₂-OH with HCl,H-[Glu(OBzl)]₄-NHEt by means of dicyclohexylcarbodiimide. The ir spectra of its nujol mull show that the hexapeptide has the β-structure of antiparallel chains. When it is dissolved in dioxane or ethylene dichloride, the hexapeptide consists of a mixture of the β-form and the solvated σ-form, but the β-form can exist only above a certain critical concentration. The critical concentration is about 0.4g dl^?1 in dioxane and 0.08g dl^?1 in ethylene dichloride, and the content of β-form increases with increasing concentration above it. The CD of the dioxane and ethylene dichloride solutions shows concentration dependence in visible and uv regions.     

Reversing-pulse electric birefringence of poly (γ-benzyl-L-glutamate). II. Field-strength dependence of steady-state and decay signals of well-fractionated samples

The electric field dependence (up to 21 kV/cm) of the steady-state and decay signals has been examined on the four well-fractionated samples of poly(γ-benzyl-L -glutamate), [Glu(OBzl)]_n, in N,N-dimethylformamide at 535 nm and 20°C. Together with the data previously obtained from the reversing-pulse electric birefringence [Ueda, K., Nomura, M. & Yamaoka, K. (1983) Biopolymers 22 , 2077–2090], the steady-state birefringence and field-free relaxation time were analyzed by a method that takes into account the polydispersity of the chain length. The weight-average chain length, (l_w), permanent dipole moment, (μ_w), electric polarizability anisotropy, (Δα_w), and the length-independent optical anisotropy factor were evaluated. The axial translation per residue was calculated for the [Glu(OBzl)]_n helix, but the uncertainly involved in the weight-average molecular weights, determined from light scattering by different investigators, makes the determination of the exact conformation of [Glu(OBzl)]_n difficult. The contribution of Δα_w to electric field orientation was found to be significant, since Δα_w was approximately proportional to l_w. A linear relationship also exists between μ_w and l_w, when the [Glu(OBzl)]_n helix is shorter than about 1200 Å.     

Conformational study of poly(α,β-L-aspartic acid)

The conformation of several samples of poly(α,β-L -Asp) with a molar fraction of β-bonds ranging from 0.1 to 0.55 was investigated by means of ir and CD spectroscopy and potentiometric titration and compared with the results obtained previously with poly(α-L -Asp). All samples investigated underwent a conformational change induced by changes in their degree of ionization: unpronounced ir absorption of amide V at 650 cm^?1 was shifted to 620 cm^?1 and substantially increased on deionization; CD spectra changed with the degree of ionization, passing through an isosbestic point; and the pattern of the titration curves was more complex than that of a simple polyelectrolyte. The conformation developing with the decreasing degree of ionization may be considered to be α-helix, as deduced according to the analogous behavior of other polypeptides. The extent of the conformational change in the individual samples depends on the molar fraction of β-bonds: the higher it is, the lower is the helix-forming ability of the sample.     

Relationship between conformation and physicochemical properties of polypeptides. I. Synthesis of homo- and co-oligopeptides by the liquid-phase method

The synthesis of the following oligo- and co-oligopeptides by the liquid-phase method is described: (L -Met)₁₅ (I), [L -Glu(OBzl)]₂₀ (II), (L -Val)₈-Gly (IV), (L -Ile)₈-Gly (V), (L -Ile)₄-Gly-(L -Ile)₄ (VI), (L -Ile)₄-Pro-(L -Ile)₄ (VII), (L -Met)₅-L -Pro-(L -Met)₅ (VIII), [L -Glu(OBzl)]₇-L -Pro-[L -Glu(OBzl)]₇ (IX). The oligomers are covalently bound to bifunctional polyethylene glycol (PEG) and monofunctional PEG-M of M_r 5 × 10³?2 × 10⁴. Analytical controls were carried out after each step of synthesis in order to ensure quantitative coupling yields. All products could be obtained in high purity as indicated by amino acid analysis, thin-layer chromatography and chiroptical methods. The solubility of the oligomers was strongly enhanced by the presence of the C-terminal PEG group, enabling conformational investigations in a variety of solvents. A significant relationship between conformation and physicochemical properties of the oligopeptides was observed. Oligomers with tendencies to adopt α-helical (I, II) or unordered structures (VI–IX) showed no pronounced change in solubility or coupling kinetics during chain elongation, whereas the onset of a β-structure (IV, V) was paralleled by a drastic decrease in solubility and reactivity of the terminal amino groups. Most notably, the insertion of a proline or glycine in the middle of a β-forming peptide chain (VI, VII) resulted in a considerable increase in solubility compared to the corresponding homo-oligomers. The impact of the conformational properties of a peptide chain on strategic considerations of peptide synthesis in solution is delineated.     

Intra- and intermolecular charge-transfer interactions between terminal electron donor and acceptor attached to poly(γ-benzyl-L-glutamate) in solution

Poly(γ-benzyl-L -glutamate) having a terminal dimethylaminoanilide group as an electron donor (D) and a terminal 3,5-dinitrobenzoyl group as an electron acceptor (A) (A-[Glu(OBzl)]_n-D) was synthesized by the N-carboxyanhydride method. Polymer samples were fractionated by gel chromatography and their number-average degrees of polymerization n were determined by the absorbances of the terminal chromophores. These polymers in chloroform and dimethylformamide solutions showed a charge-transfer (CT) absorption band around 455 nm, and the fraction of the polymer forming the CT complex was evaluated as a function of the chain length. CT absorption for short chains (n = 5 ～ 20) was attributed to intramolecular CT complex in which the A-[Glu(OBzl)]_n-D chain takes cyclic conformations. An optimum chain length for the intramolecular CT was found to be n ? 10, where the [Glu(OBzl)]_n chain may most easily bend back to form cyclic conformations. Stronger CT absorption observed for longer chains than n = 20 was shown to be intermolecular, and an intermolecular head-to-tail aggregation was found to be a cause of the strong CT interaction. All helical A-[Glu(OBzl)]_n-D chains were found to form the head-to-tail dimers in chloroform solution.     

Synthesis of poly(L-Tyr-L-Glu-L-Ala-Gly) and poly(L-Glu-L-Lys-L-Ala) and their circular dichroism spectra in aqueous solution

Two sequential polypeptides, poly(O-benzyl-L -Tyr-γ-benzyl-L -Glu-L -Ala-Gly) and poly(ε-benzyloxycarbonyl-L -Lys-L -Glu-L -Ala), were synthesized, the former by the pentachlorophenyl ester of the tetrapeptide monomer and the latter by the azide of the tripeptide monomer. After deprotection and dialysis, poly(L -Tyr-L -Glu-L -Ala-Gly) was obtained in 71% yield and had a molecular weight of 53,000. The circular dichroism spectra (CD) of the polymer at pH's 7.2, 10.5, and 11.8 and of oligomers and of the monomer at pH 7.2 indicated that the polymer exists in an α-helical conformation. After deprotection, poly(L -Lys-L -Glu-L -Ala) was obtained in 37% yield and had a molecular weight of 3000. The CD spectra of the polymer at pH 7.2 and 2.8, and of the monomer at pH 7.2, indicated that the polymer is in a randomly coiled configuration.     

Searching for folding initiation sites of staphylococcal nuclease: a study of N-terminal short fragments

The N-terminal short fragments of staphylococcal nuclease (SNase), SNase20, SNase28, and SNase36, corresponding to the sequence regions, Ala1-Gly20, Ala1-Lys28, and Ala1-Leu36, respectively, as well as an 8-residue peptide (Ala17-Ile18-Asp19-Gly20-Asp21-Thr22-Val23-Lys24) have been synthesized. The conformational states of these fragments were investigated using CD and NMR spectroscopy in aqueous solution and in trifluoroethanol (TFE)-H(2)O mixture. SNase20 containing a sequence corresponding to a bent peptide in native SNase shows a transient population of bend-like conformation around Ala12-Thr13-Leu14 in TFE-H(2)O mixture. The sequence region of Ala17-Thr22 of SNase28 displays a localized propensity for turn-like conformation in both aqueous solution and TFE-H(2)O mixture. The conformational ensemble of SNase36 in aqueous solution includes populated turn-like conformations localized in sequence regions Ala17-Thr22 and Tyr27-Gln30. The analysis suggests that these sequence regions, which form the regular secondary structures in native protein, may serve as the folding nucleation sites of SNase fragments of different chain lengths starting from the N-terminal end. Thus, the formation of bend- and turn-like conformations of these sequence regions may be involved in the early folding events of the SNase polypeptide chain in vitro.     

Structural and ICAM-1-docking properties of a cyclic peptide from the I-domain of LFA-1: an inhibitor of ICAM-1/LFA- 1-mediated T-cell adhesion

The purpose of this work was to study the conformation of cyclic peptide 1, cyclo(1,12)-Pen1-Ile2-Thr3-Asp4-Gly5-Glu6-Ala7- Thr8-Asp9-Ser10-Gly11-Cys12-OH, derived from the I-domain of the LFA-1 alpha-subunit. We found that cyclic peptide 1 can bind to the D1-domain of ICAM-1 and inhibit ICAM-1/LFA-1-mediated homotypic and heterotypic T-cell adhesion. To understand the bioactive conformation and binding requirements for cyclic peptide 1, its solution structure was studied using NMR, CD, and molecular dynamics simulations. Furthermore, possible binding properties between the cyclic peptide and the D1-domain of ICAM-1 were evaluated using docking experiments. This cyclic peptide has a stable betaII -turn at Asp4- Gly5-Glu6-Ala7 and a betaI-turn at Pen1-Ile2-Thr3-Asp4; a less stable betaV-turn is found at the C-terminal region. The beta-turn at Asp4- Gly5-Glu6-Ala7 was also found in the X-ray structure of the I-domain of LFA-1. Our CD studies showed that the peptide binds to calcium/magnesium and forms a 1:1 (peptide:calcium/magnesium) complex with low cation concentrations and multiple types of complexes with higher cation concentrations. Binding to divalent cations causes a conformational change in peptide 1; this is consistent with our previous study that binding of peptide 1 to ICAM-1 was influenced by divalent cations. Docking studies show the interaction between cyclic peptide 1 and the D1-domain of ICAM-1; it indicates that the Ile2-Thr3-Asp4-Gly4-Glu6-Ala7-Thr8 sequence interacts with the F and C strands of the D1-domain. Finally, these studies will help us design a new generation of selective peptides that may bind better to the D1-domain of ICAM-1.     

Relative stability of the α-helix of deuterated poly(γ-benzyl-L-glutamate)

The coil-to-helix transition temperatures of hydrogen bearing and deuterated poly(γ-benzyl-L -glutamate) in 1,3-dichlorotetrafluoroacetone/H₂O and/D₂O mixtures, respectively, have been determined. Together with previously obtained data for the conformational transition of this polypeptide in normal and deuterated dichloroacetic acid, these results have been used in an analysis of the effect of deuterium substitution on the intrinsic stability of the α-helical form of poly(γ-benzyl-L -glutamate). The findings, consistent for both solvent systems, showed that the deuterated polypeptide is some 5% more stable than the normal protonated poly(γ-benzyl-L -glutamate), while the polypeptide-active solvent interaction enthalpy is also slightly increased by deuterium substitution in the respective molecules. A consideration of available data for poly(β-benzyl-L -aspartate) reveals an anomaly with respect to the present analysis.     

A Study of stepwise conformational changes in poly(β-benzyl-L-aspartate) with the helix–coil transition by means of proton and carbon-13 NMR

The helix–coil transition for poly(β-benzyl-L -aspartate) [poly(Asp[OBzl])] in solvent mixtures of trifluoroacetic acid/deuterated chloroform (F₃AcOH/CDCl₃) was studied by means of proton and carbon-13 nmr. Conformational fixation of the side chain occurs before the coil–helix transition of the backbone, when neighboring phenyl rings face each other. Another type of conformational fixation occurs in the side chain after the coil–helix transition of the backbone. These conformational changes of the side chain are due to the changes of the strength of the interaction between the side-chain ester group and the F₃AcOH molecule. In the absence of F₃AcOH (coil-forming solvent), the polymer has a rather rigid structure in which the side chain may wrap around the backbone. These conformational changes of the polymer are closely related to the changes of the interaction between the polymer and F₃AcOH molecules.     

13C and 1H NMR studies of helix-coil transition of poly(β-benzyl-L-aspartate) and poly(γ-benzyl-L-glutamate): Behavior in nonprotonating solvent mixtures,and origin of solvent-induced chemical shift

From the results of ¹³C-nmr measurement of poly(β-benzyl-L -aspartate) and its model compounds in dimethyl sulphoxide/deuterated chloroform mixtures, it was found that the side chain of poly(β-benzyl-L -aspartate) is solvated by dimethyl sulphoxide in the region more than dimethyl sulphoxide 20% (v/v), where the backbone maintains the α-helix. The chemical shift differences in the benzyl group carbons of poly(γ-benzyl-L -glutamate) (trifluoroacetic acid/deuterated chloroform) accompanied by the helix-coil transition, originate from the interaction between the ester group of the side chain and trifluoroacetic acid. The chemical shift difference in the ester carbon is similar. On the other hand, the chemical shift differences of the side-chain carbons in the alkyl portion (C^β, C^γ) originate not only from the interaction between the ester group of the side chain and trifluoroacetic acid, but also from some other unknown factors. The chemical shift differences of the side-chain carbons of poly(β-benzyl-L -aspartate) originate from the interaction between the ester group of the side chain and trifluoroacetic acid.