Plasmid RP4 host-lethal function kilA and its repressor korA sequences are part of the cryptic tellurite resistance transposon Tn521

The normally silent 4.5 kb tellurite resistance transposon Tn521 of RP4 has been shown to carry sequences from both the flanking kilA and korA loci of this broad host range plasmid. The major portion of both of these sequences were used as probes to examine DNA homology in Southern transfer hybridization experiments with plasmid recipients of Tn521 chosen from varying incompatibility groups. In the case of every recipients molecule analyzed using either probe, DNA homology was observed.     

Multiple integration sites for the lactose transposon Tn951 on plasmid RP1 and establishment of a coordinate system for Tn951

Summary Various molecules generated by transposition of the lactose transposon Tn951 from plasmid pGC1 to plasmid RP1 were examined by DNA heteroduplex and restriction endonuclease analysis. Tn951 was found to transpose to at least eight different sites on RP1 in both possible orientations. A coordinate system for the lactose transposon Tn951 is constructed.     

Characterization of Pseudomonas mercury-resistance transposon Tn502, which has a preferred insertion site in RP1

Tn502mer differs in size and restriction map from the well-characterized Tn501mer. It also differs in its preferential and high-frequency insertion into the 6 kb PstI-C region of RP1. The affinity for this region is perpetuated in pVS76, a clone of RP1 PstI-C in pBR322. Restriction mapping of independent pVS76::Tn502 derivatives revealed that Tn502 inserted at the same site (or small region) in PstI-C corresponding to the 35 kb coordinate in RP1. Insertion occurred in both orientations, but one was preferred. When PstI-C was deleted from RP1, acquisition of Tn502 was reduced and the sites of insertion randomized.     

Genetic organization of transposon Tn10

Transposon Tn10 is 9300 bp in length, with 1400 bp inverted repeats at its ends. The inverted repeats are structurally intact IS-like sequences (Ross et al., 1979). Analysis of deletion mutants and structural variants of Tn10, reported below, shows that the two IS10 segments contain all of the Tn10-encoded genetic determinants, both sites and functions, that are required for transposition. Furthermore, the two repeats (IS10-Right and IS10-Left) are not functionally equivalent: IS10-Right is fully functional and is capable by itself of promoting normal levels of Tn10 transposition; IS10-Left functions only poorly by itself, promoting transposition at a very low level when IS10-Right is inactivated. Complementation analysis shows that IS10-Right encodes at least one function, required for Tn10 transposition, which can act in trans and which works at the ends of the element. Also, all of the sites specifically required for normal Tn10 transposition have been localized to the outermost 70 bp at each end of the element; there is no evidence that specific sites internal to the element play an essential role. Finally, Tn10 modulates its own transposition in such a way that transposition-defective point mutants, unlike deletion mutants, are not complemented by functions provided in trans; and wild-type Tn10, unlike deletion mutants, is not affected by functions provided in trans from a "high hopper" Tn10 element.     

The tetracycline-resistance transposon Tn10 inhibits translocation of Tn10

Summary Using a set of overlapping deletion mutants in the tetracycline-resistance transposon Tn10, it has been established that certain regions of the Tn10 genome exert a powerful inhibition on translocation of an intact Tn10 element into the bacterial genome. Such inhibition is strongly temperature dependent: at 37° C translocation is inhibited by at least a factor of 100; no inhibition of translocation is detected at 30° C.     

Detection and characterization of Tn2501, a transposon included within the lactose transposon Tn951

The DNA sequence spanning coordinates 9.9 to 16.4 kilobases of the lactose transposon Tn951 ( Cornelis et al., Mol. Gen. Genet. 160:215-224, 1978) constitutes a transposable element by itself. Unlike Tn951 ( Cornelis et al., Mol. Gen. Genet. 184:241-248, 1981), this element, called Tn2501 , transposes in the absence of any other transposon. Transposition of Tn2501 proceeds through transient cointegration and duplicates 5 base pairs of host DNA. Tn2501 is flanked by nearly perfect inverted repeats (44 of 48), related to the inverted repeats of Tn21 ( Zheng et al., Nucleic Acids Res. 9:6265-6278, 1982). Unlike Tn21 , Tn2501 does not confer mercury resistance.     

Map of plasmid RP4 derived by insertion of transposon C.

We have determined the location of 36 sites on plasmid RP4 into which transposon C (an 8.5 × 10⁶ molecular weight DNA sequence conferring trimethoprim and streptomycin resistance) had spontaneously inserted itself. These were located by sucrose gradient analysis of EcoRI-generated and then, separately, the HindIII-generated DNA fragments from each RP4-TnC² plasmid. RP4 has a single EcoRI-susceptible site and, suitably displaced from this, a HindIII-susceptible site, whereas TnC has, respectively, one and two sites for these two enzymes. Thus the sizes of the restriction fragments depend on the location and orientation of the inserted TnC.Some of the RP4-TnC clones had lost one of the RP4 characters: transferability (Tra), tetracycline (Tc) or kanamycin (Km) resistances, but no ampicillin (Ap) sensitive clones were detected. Insertions giving each of these phenotypic changes cluster together at positions on the circular RP4 map that presumably locate the genes responsible for the Tra⁺, Km^r and Tc^r phenotypes. The Tra^? plasmids were grouped into four classes on the basis of their conferred phage sensitivities and plasmid copy numbers. The gene giving Ap^r was located by its known proximity to a BamHI-susceptible site. All the plasmids analysed had TnC inserted with one particular orientation. TnC insertions giving no detectable phenotypic change were not randomly placed around RP4, but clustered into certain regions. Two large regions, one containing TnA, had no TnC insertions. Ligation experiments with restriction fragments from various RP4-TnC plasmids led to the conclusion that both these regions contain genes essential to the replication and maintenance of RP4. The location of the HindIII site of RP4 within the gene giving Km^r should prove valuable to the use of this plasmid as a cloning vehicle.     

High-frequency chromosome transfer in Rhodopseudomonas sphaeroides promoted by broad-host-range plasmid RP1 carrying mercury transposon Tn501.

Insertion of the mercury resistance transposon Tn501 into broad-host-range plasmid RP1 greatly enhanced the ability of this plasmid to promote chromosome transfer in the photosynthetic bacterium Rhodopseudomonas sphaeroides. Compared with the wild-type RP1, which produced less than 10(-8) recombinants per donor cell, RP1::Tn501 produced between 10(-3) and 10(-7) recombinants per donor cell depending upon the marker selected. Plasmid RP1::Tn501 promoted polarized transfer of the chromosome from one or perhaps two origins on the chromosome, giving rise to two linkage groups. All of the biosynthetic and antibiotic resistance genes that have been mapped, including those involved in photosynthesis, occur on one or another of these linkage groups.     

Generation of Tn5 insertions in streptococcal conjugative transposon Tn916

A method has been developed for the introduction of Tn5 into Escherichia coli plasmid chimeras containing Streptococcus faecalis DNA. Tn5 could be introduced via a lambda::Tn5 delivery vehicle. The system proved to be particularly efficient and facilitated insertions at numerous sites on DNA containing the 16-kilobase conjugative transposon Tn916. It was possible to introduce some of the resulting Tn916::Tn5 derivatives back into S. faecalis by using a recently developed protoplast transformation procedure. A presumed zygotic induction resulted in insertion of the Tn916 derivatives at multiple sites in the S. faecalis chromosome.     

Sucrose utilization determinants of transposon Tn2555

The Sac- -derivatives of the plasmid pBRS5.2 containing the sucrose utilization transposon Tn2555 were obtained by using the insertional mutagenesis. The sac mutations were mapped within the transposons DNA fragment of about 3kb. The existence of two linkage groups of the sac mutations was shown by complementation analysis. Among the gene products of Tn2555 the polypeptides of about 58, 36, 27, 14 and 12 kd were found. The data on relation of the sac genes of Tn2555 and the ones of the known plasmid pUR400 of Salmonella typhimurium are discussed.     

In vitro transposition of transposon Tn3

Transposition of the ampicillin-resistant transposon Tn3 was reproduced in vitro using the Escherichia coli cell extract. In this cell-free system, we used plasmid DNA carrying mini-Tn3 as donor and phage lambda DNA as target and assayed for ampicillin-resistance transducing phages formed by cointegration of these DNA molecules. Ampicillin-resistance transducing phages, which were obtained by in vitro packaging of lambda DNA after the in vitro transposition reaction, were formed only in the presence of Tn3 transposase. The reaction required mini-Tn3 with the proper sequence and orientation of the terminal inverted repeats of Tn3. The reaction also required DNA synthesis but not RNA synthesis by E. coli RNA polymerase.     

Transposition of the kanamycin-resistance transposon Tn903

Summary The insertion of the kanamycin-resistance transposon, Tn903, into the Escherichia coli chromosome was studied. Tn903 is similar in structure to the well known transposons Tn5 and Tn10 in that it has a unique central sequence flanked by inverted repeat sequences extending more than a thousand base pairs. However, the central region of Tn903 has enough single-frame coding capacity only for the drug modifying enzyme, whereas Tn5 and Tn10 carry multigenic unique sequences. In this paper we demonstrate that two different classes of insertion event occur: (1) the first class is a complex event in which all or part of the genome of the bacteriophage lambda vector is co-inserted near the purE locus on the E. coli chromosome (11.7 min); (2) the second class appears to be a simple transposition event in which the transposon alone is inserted at relatively nonspecific sites in the chromosome, as has been described for Tn5 and Tn10. Furthermore both classes show dependency on homology-requiring recombination systems. We suggest that Tn903 transposes infrequently because it must utilize a recA-controlled host function, whereas Tn5 and Tn10 are recA-independent and encode similar but more active functions on the transposon DNA.     

Insertion sites and the terminal nucleotide sequences of the Tn4 transposon.

The nucleotide sequences at the ends of the Tn4 transposon (mercury spectinomycin and sulfonamide resistance) have been determined. They are inverted repeated sequences of 38 nucleotides with three mismatched base pairs. These sequences are strongly homologous with the terminal sequences of Tn501 (mercury resistance) but less so with those of Tn3 (ampicillin resistance). The Tn4 transposon generates pentanucleotide members (Tn3, Tn1000, Tn501, Tn551, IS2) with the exception of Tn1721 and bacteriophage Mu. Among the three Tn4 insertion sites examined here, two of them occurred near a nonanucleotide sequence in perfect homology with part of the terminal inverted-repeat sequence of Tn4 and the third insertion occurred near a sequence of partial homology to one end of Tn4. All three insertions were in the same orientation such that IRb is proximal to its homologous sequence on the recipient DNA.     

Artificial Tn2551 transposon with replicative properties

A hybrid plasmid, pBE10 was constructed. It consists of DNAs of RSF2124 (ColE1 :: Tn3) plasmid and pUB110 plasmid of Staphylococcus aureus. The latter can be stably maintained in Bacillus subtilis. BamHI cleaved pUB110 was introduced into the BamHI site of transposon Tn3 and the resulting enlarged Tn3 (Tn2551) was transposed from pBE10 onto phage lambda and than to pMB9 (Tc) and RSF1010(Sm Su) plasmids. Restriction and heteroduplex analysis of pMB9 :: Tn2551(pBE21) and RSF1010 :: :: TN2551(pBE32) was carried out. Plasmids pBE10, pBE21 and pBE32 demonstrated some kind of molecular instability when introduced by transformation into Bacillus subtilis.     

Tn7: a target site-specific transposon

The bacterial transposon Tn7 is an unusual mobile DNA segment. Most transposable elements move at low-frequency and display little target site-selectivity. By contrast, Tn7 inserts at high-frequency into a single specific site in the chromosomes of many bacteria. In the absence of this specific site, called attTn7 in Escherichia coli where Tn7 has been most extensively studied, Tn7 transposes at low-frequency and inserts into many different sites. Much has recently been learned about Tn7 transposition from both genetic and biochemical studies. The Tn7 recombination machinery is elaborate and includes a large number of Tn7-encoded proteins, probably host-encoded proteins and also rather large cis-acting transposition sequences at the transposon termini and at the target site. Dissection of the Tn7 transposition mechanism has revealed that the DNA strand breakage and joining reactions that underlie the translocation of Tn7 have several unusual features.     

Bacterial transposon Tn5: evolutionary inferences

Transposable elements induce spontaneous mutations, promote genome rearrangements, regulate gene expression, and participate in the horizontal spread of genes encoding traits such as antibiotic resistance among bacterial genera too distantly related to undergo homologous recombination. Here we review the bacterial transposon Tn5 and focus on those aspects of its functional organization and transposition which provide insights into how it and other elements may have arisen, proliferated, and evolved.      

Generation of Tn5 insertions in streptococcal conjugative transposon Tn916.

A method has been developed for the introduction of Tn5 into Escherichia coli plasmid chimeras containing Streptococcus faecalis DNA. Tn5 could be introduced via a lambda::Tn5 delivery vehicle. The system proved to be particularly efficient and facilitated insertions at numerous sites on DNA containing the 16-kilobase conjugative transposon Tn916. It was possible to introduce some of the resulting Tn916::Tn5 derivatives back into S. faecalis by using a recently developed protoplast transformation procedure. A presumed zygotic induction resulted in insertion of the Tn916 derivatives at multiple sites in the S. faecalis chromosome.     

Tn1545: a conjugative shuttle transposon

Summary Tn1545, from Streptococcus pneumoniae BM4200, confers resistance to kanamycin (aphA-3), erythromycin (ermAM) and tetracycline (tetM). The 25.3 kb element is self-transferable to various Gram-positive bacterial genera where it transposes. Tn1545 was cloned in its entirety in the recombination deficient Escherichia coli HB101 where it was unstable. The three resistance genes aphA-3, ermAM and tetM were expressed but were not transferable to other E. coli cells. Tn1545 transposed from the hybrid plasmid to multiple sites of the chromosome of its new host. The element re-transposed, at a frequency of 5×10^-9, from the chromosome to various sites of a conjugative plasmid where it could be lost by apparently clean excision. The element transformed and transposed to the chromosome of Bacillus subtilis. The properties of the conjugative shuttle transposon Tn1545 may account for the recent emergence of genes from Gram-positive bacteria in Gramnegative organisms.