The Chlamydia effector chlamydial outer protein N (CopN) sequesters tubulin and prevents microtubule assembly

Chlamydia species are obligate intracellular pathogens that utilize a type three secretion system to manipulate host cell processes. Genetic manipulations are currently not possible in Chlamydia, necessitating study of effector proteins in heterologous expression systems and severely complicating efforts to relate molecular strategies used by Chlamydia to the biochemical activities of effector proteins. CopN is a chlamydial type three secretion effector that is essential for virulence. Heterologous expression of CopN in cells results in loss of microtubule spindles and metaphase plate formation and causes mitotic arrest. CopN is a multidomain protein with similarity to type three secretion system "plug" proteins from other organisms but has functionally diverged such that it also functions as an effector protein. We show that CopN binds directly to αβ-tubulin but not to microtubules (MTs). Furthermore, CopN inhibits tubulin polymerization by sequestering free αβ-tubulin, similar to one of the mechanisms utilized by stathmin. Although CopN and stathmin share no detectable sequence identity, both influence MT formation by sequestration of αβ-tubulin. CopN displaces stathmin from preformed stathmin-tubulin complexes, indicating that the proteins bind overlapping sites on tubulin. CopN is the first bacterial effector shown to disrupt MT formation directly. This recognition affords a mechanistic understanding of a strategy Chlamydia species use to manipulate the host cell cycle.     

G protein activation is prerequisite for functional coupling between Galpha/Gbetagamma and tubulin/microtubules

Heterotrimeric G proteins participate in signal transduction by transferring signals from cell surface receptors to intracellular effector molecules. Interestingly, recent results suggest that G proteins also interact with microtubules and participate in cell division and differentiation. It has been shown earlier that both alpha and betagamma subunits of G proteins modulate microtubule assembly in vitro. Since G protein activation and subsequent dissociation of alpha and betagamma subunits are necessary for G proteins to participate in signaling processes, here we asked if similar activation is required for modulation of microtubule assembly by G proteins. We reconstituted Galphabetagamma heterotrimer from myristoylated-Galpha and prenylated-Gbetagamma, and found that the heterotrimer blocks Gi1alpha activation of tubulin GTPase and inhibits the ability of Gbeta1gamma2 to promote in vitro microtubule assembly. Results suggest that G protein activation is required for functional coupling between Galpha/Gbetagamma and tubulin/microtubules, and supports the notion that regulation of microtubules is an integral component of G protein mediated signaling.     

Dynein Light Chain 1 (LC8) Association Enhances Microtubule Stability and Promotes Microtubule Bundling

Dynein light chain 1 (LC8), a highly conserved protein, is known to bind to a variety of different polypeptides. It functions as a dimer, which is inactivated through phosphorylation at the Ser-88 residue. A loss of LC8 function causes apoptosis in Drosophila embryos, and its overexpression induces malignant transformation of breast cancer cells. Here we show that LC8 binds to tubulin, promotes microtubule assembly, and induces the bundling of reconstituted microtubules in vitro. Furthermore, LC8 decorates microtubules both in Drosophila embryos and in HeLa cells, increases the microtubule stability, and promotes microtubule bundling in these cells. Microtubule stability influences a number of different cellular functions including mitosis and cell differentiation. The LC8 overexpression reduces the susceptibility of microtubules to cold and nocodazole-induced depolymerization in tissue-cultured cells and increases microtubule acetylation, suggesting that LC8 stabilizes microtubules. We also show that LC8 knockdown or transfection with inhibitory peptides destabilizes microtubules and inhibits bipolar spindle assembly in HeLa cells. In addition, LC8 knockdown leads to the mitotic block in HeLa cells. Furthermore, molecular docking analysis using the crystal structures of tubulin and LC8 dimer indicated that the latter may bind at α-β tubulin junction in a protofilament at sites distinct from the kinesin and dynein binding sites. Together, we provide the first evidence of a novel microtubule-associated protein-like function of LC8 that could explain its reported roles in cellular metastasis and differentiation.     

The control of microtubule stability in vitro and in transfected cells by MAP1B and SCG10

In neurons, the regulation of microtubules plays an important role for neurite outgrowth, axonal elongation, and growth cone steering. SCG10 family proteins are the only known neuronal proteins that have a strong destabilizing effect, are highly enriched in growth cones and are thought to play an important role during axonal elongation. MAP1B, a microtubule-stabilizing protein, is found in growth cones as well, therefore it was important to test their effect on microtubules in the presence of both proteins. We used recombinant proteins in microtubule assembly assays and in transfected COS-7 cells to analyze their combined effects in vitro and in living cells, respectively. Individually, both proteins showed their expected activities in microtubule stabilization and destruction respectively. In MAP1B/SCG10 double-transfected cells, MAP1B could not protect microtubules from SCG10-induced disassembly in most cells, in particular not in cells that contained high levels of SCG10. This suggests that SCG10 is more potent to destabilize microtubules than MAP1B to rescue them. In microtubule assembly assays, MAP1B promoted microtubule formation at a ratio of 1 MAP1B per 70 tubulin dimers while a ratio of 1 SCG10 per two tubulin dimers was needed to destroy microtubules. In addition to its known binding to tubulin dimers, SCG10 binds also to purified microtubules in growth cones of dorsal root ganglion neurons in culture. In conclusion, neuronal microtubules are regulated by antagonistic effects of MAP1B and SCG10 and a fine tuning of the balance of these proteins may be critical for the regulation of microtubule dynamics in growth cones.     

Scc1 (CP0432) and Scc4 (CP0033) function as a type III secretion chaperone for CopN of Chlamydia pneumoniae

The Chlamydia pneumoniae CopN protein is a member of the YopN/TyeA/InvE/MxiC family of secreted proteins that function to regulate the secretion of type III secretion system (T3SS) translocator and effector proteins. In this study, the Scc1 (CP0432) and Scc4 (CP0033) proteins of C. pneumoniae AR-39 were demonstrated to function together as a type III secretion chaperone that binds to an N-terminal region of CopN. The Scc1/Scc4 chaperone promoted the efficient secretion of CopN via a heterologous T3SS, whereas, the Scc3 chaperone, which binds to a C-terminal region of CopN, reduced CopN secretion.     

Role of tubulin-associated proteins in microtubule nucleation and elongation

Previous experiments have shown that a fraction of microtubule-associated proteins is essential for the self-assembly of microtubules in vitro. When tubulin was titrated with increasing concentrations of these non-tubulin accessory factors, both the rate and extent of polymerization increased in a sigmoidal as opposed to a stoichiometric fashion. The non-tubulin proteins promoted the nucleation of microtubules as determined from the analysis of the kinetics of tubulin selfassembly and the examination of the microtubule length distribution following polymerization. The effect of the non-tubulin factors on microtubule elongation was determined by kinetic experiments in which purified tubulin subunits were added to microtubule seeds and the initial rate of polymerization was measured under conditions where spontaneous self-assembly was below detectable levels. In addition, microtubule growth was also observed when isolated flagellar axonemes were incubated with purified tubulin subunits indicating that the non-tubulin factors were not an absolute requirement for elongation. Analysis of the data in terms of the condensation mechanism of microtubule assembly indicated that the non-tubulin proteins stimulated the growth of microtubules not by increasing the rate of polymerization but by decreasing the rate of depolyerization. The mechanism by which these accessory factors promote tubulin assembly may be summarized as follows: under the conditions employed, they are required for tubulin initiation but not for elongation; the factors affect the extent and net rate at which polymer is formed by binding to the polymer, thereby stabilizing the formed microtubules and consequently shifting the equilibrium to favor assembly.     

Structure of a benzylidene derivative of 9(10H)-anthracenone in complex with tubulin provides a rationale for drug design

Microtubules are composed of αβ-tubulin heterodimers and have been treated as highly attractive targets for antitumor drugs. A broad range of agents bind to tubulin and interfere with microtubule assembly, including colchicine binding site inhibitors (CBSIs). Tubulin Polymerization Inhibitor I (TPI1), a benzylidene derivative of 9(10H)-anthracenone, is a CBSI that inhibits the assembly of microtubules. However, for a long time, the design and development of anthracenone family drugs have been hindered by the lack of structural information of the tubulin-agent complex. Here we report a 2.3 Å crystal structure of tubulin complexed with TPI1, the first structure of anthracenone family agents. This complex structure reveals the interactions between TPI1 and tubulin, and thus provides insights into the development of new anthracenone derivatives targeting the colchicine binding site.     

Interaction of vinblastine with steady-state microtubules in vitro

At low concentrations, vinblastine binds rapidly and reversibly to a very limited number of high affinity sites on steady-state bovine brain microtubules (mean K_d, 1.9 × 10^?6m; 16.8 ± 4.3 vinblastine binding sites per microtubule) which appear to be located at one or both ends of the microtubules. At high concentrations, vinblastine binds to a high binding capacity class of sites of undetermined affinity, located on helical strands of protofilaments which form at the ends of depolymerizing microtubules, and/or along the surface of the microtubules. Substoichiometric inhibition of microtubule assembly, which occurs at low vinblastine concentrations, appears to be due to the binding of vinblastine to the high affinity class of sites. Fifty per cent inhibition of tubulin addition to the net assembly ends of steady-state microtubules occurred at 1.38 × 10^?7m-drug, and at this concentration, 1.16 ± 0.27 molecules of vinblastine were bound to the high affinity class of sites. Vinblastine appeared to bind directly to the microtubule ends, and our results indicate that vinblastine inhibits the assembly of steady-state bovine brain microtubules by binding rapidly and with high affinity to one or two molecules of tubulin at the net assembly ends. Splaying and peeling of protofilaments at microtubule ends and the active depolymerization of microtubules occurred only at vinblastine concentrations greater than 1 × 10^?6 to 2 × 10^?6m. This action of vinblastine is associated with and may be due to the binding of vinblastine to the high capacity class of sites. Both actions of vinblastine may be due to the binding of vinblastine to the same binding sites on the tubulin molecule, with the sites exhibiting either a high or low affinity depending upon the location in the microtubule.     

Increased microtubule assembly in bovine brain tubulin lacking the type III isotype of beta-tubulin

Tubulin, the major constituent protein of microtubules, is a heterodimer of alpha and beta subunits. Both alpha and beta exist in multiple isotypic forms. It is not clear if different isotypes perform different functions. In order to approach this question, we have made a monoclonal antibody specific for the beta III isotype of tubulin. This particular isotype is neuron-specific and appears to be phosphorylated near the C terminus. We have used immunoaffinity depletion chromatography to prepare tubulin lacking the beta III subunit. We find that removal of the beta III isotype results in a tubulin mixture able to assemble much more rapidly than is unfractionated tubulin when reconstituted with either of the two microtubule-associated proteins (MAPs), tau or MAP 2. Our results suggest that the different isotypes of tubulin differ from each other in their ability to polymerize into microtubules. We have also found that the anti-beta III antibody can stimulate microtubule assembly when reconstituted with tubulin and either tau or MAP 2. When reconstituted with tubulin lacking the beta III isotype, the antibody causes the tubulin to polymerize into a polymer that is a microtubule in the presence of MAP 2 and a ribbon in the presence of tau.     

Polyamine Sharing between Tubulin Dimers Favours Microtubule Nucleation and Elongation via Facilitated Diffusion

We suggest for the first time that the action of multivalent cations on microtubule dynamics can result from facilitated diffusion of GTP-tubulin to the microtubule ends. Facilitated diffusion can promote microtubule assembly, because, upon encountering a growing nucleus or the microtubule wall, random GTP-tubulin sliding on their surfaces will increase the probability of association to the target sites (nucleation sites or MT ends). This is an original explanation for understanding the apparent discrepancy between the high rate of microtubule elongation and the low rate of tubulin association at the microtubule ends in the viscous cytoplasm. The mechanism of facilitated diffusion requires an attraction force between two tubulins, which can result from the sharing of multivalent counterions. Natural polyamines (putrescine, spermidine, and spermine) are present in all living cells and are potent agents to trigger tubulin self-attraction. By using an analytical model, we analyze the implication of facilitated diffusion mediated by polyamines on nucleation and elongation of microtubules. In vitro experiments using pure tubulin indicate that the promotion of microtubule assembly by polyamines is typical of facilitated diffusion. The results presented here show that polyamines can be of particular importance for the regulation of the microtubule network in vivo and provide the basis for further investigations into the effects of facilitated diffusion on cytoskeleton dynamics.     

Spatial variation of microtubule depolymerization in large asters

Microtubule plus-end depolymerization rate is a potentially important target of physiological regulation, but it has been challenging to measure, so its role in spatial organization is poorly understood. Here we apply a method for tracking plus ends based on time difference imaging to measure depolymerization rates in large interphase asters growing in Xenopus egg extract. We observed strong spatial regulation of depolymerization rates, which were higher in the aster interior compared with the periphery, and much less regulation of polymerization or catastrophe rates. We interpret these data in terms of a limiting component model, where aster growth results in lower levels of soluble tubulin and microtubule-associated proteins (MAPs) in the interior cytosol compared with that at the periphery. The steady-state polymer fraction of tubulin was ∼30%, so tubulin is not strongly depleted in the aster interior. We propose that the limiting component for microtubule assembly is a MAP that inhibits depolymerization, and that egg asters are tuned to low microtubule density.     

γ‐Tubulin complex in Trypanosoma brucei: molecular composition,subunit interdependence and requirement for axonemal central pair protein assembly

γ‐Tubulin complex constitutes a key component of the microtubule‐organizing center and nucleates microtubule assembly. This complex differs in complexity in different organisms: the budding yeast contains the γ‐tubulin small complex (γTuSC) composed of γ‐tubulin, gamma‐tubulin complex protein (GCP)2 and GCP3, whereas animals contain the γ‐tubulin ring complex (γTuRC) composed of γTuSC and three additional proteins, GCP4, GCP5 and GCP6. In Trypanosoma brucei, the composition of the γ‐tubulin complex remains elusive, and it is not known whether it also regulates assembly of the subpellicular microtubules and the spindle microtubules. Here we report that the γ‐tubulin complex in T. brucei is composed of γ‐tubulin and three GCP proteins, GCP2‐GCP4, and is primarily localized in the basal body throughout the cell cycle. Depletion of GCP2 and GCP3, but not GCP4, disrupted the axonemal central pair microtubules, but not the subpellicular microtubules and the spindle microtubules. Furthermore, we showed that the γTuSC is required for assembly of two central pair proteins and that γTuSC subunits are mutually required for stability. Together, these results identified an unusual γ‐tubulin complex in T. brucei, uncovered an essential role of γTuSC in central pair protein assembly, and demonstrated the interdependence of individual γTuSC components for maintaining a stable complex.     

Structural and functional domains of tubulin

The molecular aspects of the microtubule system is a research area that has developed very rapidly during the past decade. Research on the assembly mechanisms and chemistry of tubulin and the molecular biology of microtubules have advanced our understanding of microtubule formation and its regulation. The emerging view of tubulin is of a macromolecule containing spatially discrete sequences that constitute functionally different domains with respect to self-association, interactions with microtubule associated proteins (MAPs) and specific ligands. Recent studies point to the role of the carboxyl-terminal moiety of tubulin subunits in regulating its assembly into microtubules. These investigations combined with further studies on the spatial relationships between tubulin domains should provide new insights into the detailed structural basis of microtubule assembly.     

Baccatin III induces assembly of purified tubulin into long microtubules

Baccatin III is widely considered to be an inactive derivative of Taxol. We have reexamined its effect on in vitro assembly of tubulin under a variety of conditions. We found baccatin III to be active in all circumstances in which Taxol is active: it assembled GTP-tubulin, GDP-tubulin, and microtubule protein into normal microtubules and stabilized these polymers against cold-induced disassembly. The effect of baccatin III on in vitro microtubule assembly was quantitatively assessed through determination of critical concentrations, which can be used to obtain the apparent equilibrium constants for the addition of tubulin subunits to growing microtubules. The apparent equilibrium constants for the growth reaction for baccatin III-induced GTP-tubulin and GDP-tubulin assembly measured at 37 degrees C were 4.2-4.6-fold less than those measured for Taxol-induced GTP-tubulin and GDP-tubulin assembly. These data indicate that the entire Taxol side chain contributes only about -1 kcal/mol to the apparent standard free energy of microtubule growth at 37 degrees C regardless of the nature of the E site nucleotide. These data also support the idea that the majority of the interactions between Taxol and tubulin that affect this equilibrium occur between the baccatin portion of the molecule and the binding site. We have also observed a structural difference in microtubules formed using baccatin III and Taxol. Baccatin III-induced microtubules were routinely much longer than those assembled by Taxol, even when very high concentrations of baccatin III were employed. One interpretation of these data is that baccatin III and Taxol differ in their abilities to nucleate GTP-tubulin. This difference in activity may have bearing on the large disparity in cytotoxicity of the two molecules.     

Cytoplasmic Dynein and Dynactin Are Required for the Transport of Microtubules into the Axon

Previous work from our laboratory suggested that microtubules are released from the neuronal centrosome and then transported into the axon (Ahmad, F.J., and P.W. Baas. 1995. J. Cell Sci. 108: 2761–2769). In these studies, cultured sympathetic neurons were treated with nocodazole to depolymerize most of their microtubule polymer, rinsed free of the drug for a few minutes to permit a burst of microtubule assembly from the centrosome, and then exposed to nanomolar levels of vinblastine to suppress further microtubule assembly from occurring. Over time, the microtubules appeared first near the centrosome, then dispersed throughout the cytoplasm, and finally concentrated beneath the periphery of the cell body and within developing axons. In the present study, we microinjected fluorescent tubulin into the neurons at the time of the vinblastine treatment. Fluorescent tubulin was not detected in the microtubules over the time frame of the experiment, confirming that the redistribution of microtubules observed with the experimental regime reflects microtubule transport rather than microtubule assembly. To determine whether cytoplasmic dynein is the motor protein that drives this transport, we experimentally increased the levels of the dynamitin subunit of dynactin within the neurons. Dynactin, a complex of proteins that mediates the interaction of cytoplasmic dynein and its cargo, dissociates under these conditions, resulting in a cessation of all functions of the motor tested to date (Echeverri, C.J., B.M. Paschal, K.T. Vaughan, and R.B. Vallee. 1996. J. Cell Biol. 132: 617–633). In the presence of excess dynamitin, the microtubules did not show the outward progression but instead remained near the centrosome or dispersed throughout the cytoplasm. On the basis of these results, we conclude that cytoplasmic dynein and dynactin are essential for the transport of microtubules from the centrosome into the axon.     

What tubulin drugs tell us about microtubule structure and dynamics

A wide range of small molecules, including alkaloids, macrolides and peptides, bind to tubulin and disturb microtubule assembly dynamics. Some agents inhibit assembly, others inhibit disassembly. The binding sites of drugs that stabilize microtubules are discussed in relation to the properties of microtubule associated proteins. The activities of assembly inhibitors are discussed in relation to different nucleotide states of tubulin family protein structures.     

Theory for modeling the copolymerization of tubulin and tubulin-colchicine complex

Substoichiometric concentrations of tubulin-colchicine complex (TC) inhibits microtubule assembly through a copolymerization reaction between tubulin and TC. We have determined the rates and extent of TC incorporation into bovine brain microtubules and developed a theory that models copolymerization. Our analysis suggests that while the apparent association rate constants for tubulin and TC are similar, the apparent dissociation rate constants for TC are a factor of five or more larger than those of tubulin. Copolymer composition showed only slight changes during assembly despite changes in the solution phase and showed little dependence at high TC upon the initial tubulin concentration. The theory was based on coupled Oosawa-Kasai equations that allow for the co-assembly of two components, tubulin and TC. An expression was derived that relates copolymer composition to reaction mixture composition and to the affinity of microtubule ends for tubulin and TC. This expression predicts copolymer composition at TC concentrations less than 10 microM and correlates composition with assembly inhibition. We perceive copolymerization as a facilitated incorporation of TC requiring the presence of tubulin. TC incorporation was dependent on the ratio of total tubulin to the dissociation constant for TC bound to microtubule ends. The copolymerization reaction is thus characterized by an interplay of two effects (a) where tubulin facilitates the incorporation of TC into the microtubule, and (b) where TC inhibits the assembly of tubulin into microtubules.     

Purification, characterization, and assembly properties of tubulin from unfertilized eggs of the sea urchin Strongylocentrotus purpuratus

Tubulin was purified from unfertilized eggs of the sea urchin Strongylocentrotus purpuratus by chromatography of an egg supernatant fraction on DEAE-Sephacel or DEAE-cellulose followed by cycles of temperature-dependent microtubule assembly and disassembly in vitro. After two assembly cycles, the microtubule protein consisted of the alpha- and beta-tubulins (greater than 98% of the protein) and trace quantities of seven proteins with molecular weights less than 55 000; no associated proteins with molecular weights greater than tubulin were observed. When analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis on urea-polyacrylamide gradient gels, the alpha- and beta-tubulins did not precisely comigrate with their counterparts from bovine brain. Two-dimensional electrophoresis revealed that urchin egg tubulin contained two major alpha-tubulins and a single major beta species. No oligomeric structures were observed in tubulin preparations maintained at 0 degrees C. Purified egg tubulin assembled efficiently into microtubules when warmed to 37 degrees C in a glycerol-free polymerization buffer containing guanosine 5'-triphosphate. The critical concentration for assembly of once- or twice-cycled egg tubulin was 0.12-0.15 mg/mL. Morphologically normal microtubules were observed by electron microscopy, and these microtubules were depolymerized by exposure to low temperature or to podophyllotoxin. Chromatography of a twice-cycled egg tubulin preparation on phosphocellulose did not alter its protein composition and did not affect its subsequent assembly into microtubules. At concentrations above 0.5-0.6 mg/mL, a concentration-dependent "overshoot" in turbidity was observed during the assembly reaction. These results suggest that egg tubulin assembles into microtubules in the absence of the ring-shaped oligomers and microtubule-associated proteins that characterize microtubule protein from vertebrate brain.     

Purification of microtubule protein from beef brain and comparison of the assembly requirements for neuronal microtubules isolated from beef and hog.

The polymerization of microtubule protein from beef brain is inefficient under the same conditions which are optimal for the assembly of microtubules isolated from hog brain (0.1 m piperazine-N,N′-bis(2-ethanesulfonic acid) buffer at pH 6.94). In examining the conditions required for microtubule polymerization in both beef brain extract and purified microtuble protein, it was determined that the pH optimum was pH 6.62 or 0.3 pH unit lower than the reported optimum for hog. Other assembly requirements (ionic strength, Mg²⁺ and nucleotide concentration, temperature) remained essentially the same as for hog. By separating and recombining fractions of tubulin and nontubulin components prepared from beef and hog microtubule protein, the requirement for the reduction in pH was found to be due to the tubulin and not to the microtubule-associated proteins. It was also determined that the efficiency of beef tubulin assembly, as measured by the yield of microtubule polymer, decreased rapidly after slaughter with a half-time of 19 min. Furthermore, when the overall efficiency of polymerization was reduced, the extent of assembly at each cycle of purification by disassembly and assembly was also observed to be depressed. The variations in the requirements for neuronal tubulin assembly in two closely related mammals suggest that the conditions required for assembly of microtubule protein in other tissues and cell types may also be different.     

Nucleotide binding and phosphorylation in microtubule assembly in vitro.

Two non-hydrolyzable analogs of GTP, guanylyl-β,γ-methylene diphosphonate and guanylyl imidodiphosphate, have been found to induce rapid and efficient microtubule assembly in vitro by binding at the exchangeable site (E-site) on tubulin. Characterization of microtubule polymerization by several criteria, including polymerization kinetics, nucleotide binding to depolymerized and polymerized microtubules, and microtubule stability, reveals strong similarities between microtubule assembly induced by GTP and non-hydrolyzable GTP analogs. Nucleoside triphosphates which bind weakly or not at all to tubulin, such as ATP, UTP and CTP, are shown to induce microtubule assembly by means of a nucleoside diphosphate kinase (NDP-kinase, EC 2.7.4.6.) activity which is not intrinsic to tubulin. The NDP-kinase mediates microtubule polymerization by phosphorylating tubulin-bound GDP in situ at the E-site. Although hydrolysis of exchangeably bound GTP occurs, it is found to be uncoupled from the polymerization reaction. The non-exchangeable nucleotide binding site on tubulin (N-site) is not directly involved in microtubule assembly in vitro. The N-site is shown to contain almost exclusively GTP which is not hydrolyzed during microtubule assembly. A scheme is presented in which GTP acts as an allosteric effector at the E-site during microtubule assembly in vitro.