Isotope effect studies of chicken liver NADP malic enzyme: role of the metal ion and viscosity dependence

The role of the metal ion in the oxidative decarboxylation of malate by chicken liver NADP malic enzyme and details of the reaction mechanism have been investigated by 13C isotope effects. With saturating NADP and the indicated metal ion at a total concentration 10-fold higher than its Km, the following primary 13C kinetic isotope effects at C4 of malate [13(V/Kmal)] were observed at pH 8.0: Mg2+, 1.0336; Mn2+, 1.0365; Cd2+, 1.0366; Zn2+, 1.0337; Co2+, 1.0283; Ni2+, 1.025. Knowing the partitioning of the intermediate oxalacetate between decarboxylation to pyuvate and reduction to malate allows calculation of the intrinsic carbon isotope effect for decarboxylation. For Mg2+ as activator, this was 1.049 with NADP and 1.046 with 3-acetylpyridine adenine dinucleotide phosphate, although the intrinsic primary deuterium isotope effects on dehydrogenation were 5.6 and 4.2, and the partition ratios of the oxalacetate intermediate for decarboxylation as opposed to hydride transfer were 0.11 and 3.96 (the result of the different redox potentials of NADP and the acetylpyridine analogue). The close agreement of the intrinsic 13C isotope effects with each other and with the 13C isotope effect for the Mg2+-catalyzed nonenzymatic decarboxylation of oxalacetate of 1.0489 [Grissom, C. B., & Cleland, W. W. (1986) J. Am. Chem. Soc. 108, 5582] indicates a similarity of transition states for these reactions. It was not possible to calculate reasonable intrinsic carbon isotope effects with the other metal ions by use of the partitioning ratio of oxalacetate because of decarboxylation by another mechanism.(ABSTRACT TRUNCATED AT 250 WORDS)     

Multiple isotope effects with alternative dinucleotide substrates as a probe of the malic enzyme reaction

Deuterium isotope effects and 13C isotope effects with deuterium- and protium-labeled malate have been obtained for both NAD- and NADP-malic enzymes by using a variety of alternative dinucleotide substrates. With nicotinamide-containing dinucleotides as the oxidizing substrate, the 13C effect decreases when deuterated malate is the substrate compared to the value obtained with protium-labeled malate. These data are consistent with a stepwise chemical mechanism in which hydride transfer precedes decarboxylation of the oxalacetate intermediate as previously proposed [Hermes, J. D., Roeske, C. A., O'Leary, M. H., & Cleland, W. W. (1982) Biochemistry 21, 5106]. When dinucleotide substrates such as thio-NAD, 3-acetylpyridine adenine dinucleotide, and 3-pyridinealdehyde adenine dinucleotide that contain modified nicotinamide rings are used, the 13C effect increases when deuterated malate is the substrate compared to the value obtained with protium-labeled malate. These data, at face value, are consistent with a change in mechanism from stepwise to concerted for the oxidative decarboxylation portion of the mechanism. However, the increase in the deuterium isotope effect from 1.5 to 3 with a concomitant decrease in the 13C isotope effect from 1.034 to 1.003 as the dinucleotide substrate is changed suggests that the reaction may still be stepwise with the non-nicotinamide dinucleotides. A more likely explanation is that a beta-secondary 13C isotope effect accompanies hydride transfer as a result of hyperconjugation of the beta-carboxyl of malate as the transition state for the hydride transfer step is approached.(ABSTRACT TRUNCATED AT 250 WORDS)     

Equilibrium perturbation by isotope substitution.

When malic enzyme is added to a mixture of malate-2-d, TPN, CO2, pyruvate, and TPNH at concentrations calculated to be at equilibrium, the TPNH level first drops and then increases slowly to its original level. This equilibrium perturbation is caused by slower cleavage of C-D than C-H bonds during hydride transfer as malate-2-d and TPNH are partly converted into TPND and malate-2-h in the process of establishing isotopic equilibrium. With malate-2-d, isotope effects for malic enzyme at pH 7.1 and malate dehydrogenase at pH 9.3 of 1.45 and 1.70-2.16 (depending on oxaloacetate level) were determined with this method, while the corresponding isotope effects on V/Kmalate and V for the chemical reactions were 1.5-1.8 and 1.0, and 1.9 and 1.5 for the two enzymes. The advantage of this method is its extreme sensitivity, and the lack of interference from various artifacts. The sensitivity is sufficient to permit determination of 13C and 15N isotope effects in favorable cases, and values of 1.031 for malic enzyme with 13CO2, and 1.047 for glutamate dehydrogenase with 15NH4+ have been determined. In the course of this work it was discovered that the equilibrium constants for oxidation by DPN, and oxidative decarboxylation by TPN are lower for malate-2-d than for malate-2-h by a factor of 0.76-0.82. Changes in Keq upon deuterium substitution, which are predicted by the calculations of Hartshorn and Shiner (1972), should be observed for many other reactions as well.     

Alpha-secondary tritium kinetic isotope effects indicate hydrogen tunneling and coupled motion occur in the oxidation of L-malate by NAD-malic enzyme

The NAD-malic enzyme from Ascaris suum catalyzes the divalent metal ion-dependent oxidative decarboxylation of L-malate to give pyruvate and CO2, with NAD+ as the oxidant. Alpha-secondary tritium kinetic isotope effects were measured with NAD+ or APAD+ and L-malate-2-H(D) and several different divalent metal ions. The alpha-secondary tritium kinetic isotope effects are slightly higher than 1 with NAD+ and L-malate as substrates, much larger than the expected inverse isotope effect for a hybridization change from sp2 to sp3. The alpha-secondary tritium kinetic isotope effects are reduced to values near 1 with L-malate-2-D as the substrate, regardless of the metal ion that is used. Data suggest the presence of quantum mechanical tunneling and coupled motion in the malic enzyme reaction when NAD+ and malate are used as substrates. Isotope effects were also measured using the D/T method with NAD+ and Mn2+ as the substrate pair. A Swain-Schaad exponent of 2.2 (less than the value of 3.26 expected for strictly semiclassical behavior) is estimated, suggesting the presence of other slow steps along the reaction pathway. With APAD+ and Mn2+ as the substrate pair, inverse alpha-secondary tritium kinetic isotope effects are observed, and a Swain-Schaad exponent of 3.3 is estimated, consistent with rate-limiting hydride transfer and no quantum mechanical tunneling or coupled motion. Data are discussed in terms of the malic enzyme mechanism and the theory developed by Huskey for D/T isotope effects as an indicator of tunneling [Huskey, W. P. (1991) J. Phys. Org. Chem. 4, 361-366].     

Effect of metal ions on the aspartate transaminase (E.C.2.6.1.1.) activity in tobacco tissue culture

Aspartate transaminase enzyme was prepared from tobacco tissue cultures. Effect of 13 different metal ions on the enzyme activity was preliminarily studied. The enzyme activity was inhibited by five ions, namely Cd2+, Hg2+, Zn2+, Cu2+, and Ag+. None of the ions investigated enhanced the activity. Fe2+ caused an apparent activity increase in the reaction mixture. Pyridoxal-phosphate enhanced this effect of the Fe2+.     

Protonation mechanism and location of rate-determining steps for the Ascaris suum nicotinamide adenine dinucleotide-malic enzyme reaction from isotope effects and pH studies

The pH dependence of the kinetic parameters and the primary deuterium isotope effects with nicotinamide adenine dinucleotide (NAD) and also thionicotinamide adenine dinucleotide (thio-NAD) as the nucleotide substrates were determined in order to obtain information about the chemical mechanism and location of rate-determining steps for the Ascaris suum NAD-malic enzyme reaction. The maximum velocity with thio-NAD as the nucleotide is pH-independent from pH 4.2 to 9.6, while with NAD, V decreases below a pK of 4.8. V/K for both nucleotides decreases below a pK of 5.6 and above a pK of 8.9. Both the tartronate pKi and V/Kmalate decrease below a pK of 4.8 and above a pK of 8.9. Oxalate is competitive vs. malate above pH 7 and noncompetitive below pH 7 with NAD as the nucleotide. The oxalate Kis increases from a constant value above a pK of 4.9 to another constant value above a pK of 6.7. The oxalate Kii also increases above a pK of 4.9, and this inhibition is enhanced by NADH. In the presence of thio-NAD the inhibition by oxalate is competitive vs. malate below pH 7. For thio-NAD, both DV and D(V/K) are pH-independent and equal to 1.7. With NAD as the nucleotide, DV decreases to 1.0 below a pK of 4.9, while D(V/KNAD) and D(V/Kmalate) are pH-independent. Above pH 7 the isotope effects on V and the V/K values for NAD and malate are equal to 1.45, the pH-independent value of DV above pH 7. From the above data, the following conclusions can be made concerning the mechanism for this enzyme. Substrates bind to only the correctly protonated form of the enzyme. Two enzyme groups are necessary for binding of substrates and catalysis. Both NAD and malate are released from the Michaelis complex at equal rates which are equal to the rate of NADH release from E-NADH above pH 7. Below pH 7 NADH release becomes more rate-determining as the pH decreases until at pH 4.0 it completely limits the overall rate of the reaction.     

Isotope effect studies of the chemical mechanism of nicotinamide adenine dinucleotide malic enzyme from Crassula

The 13C primary kinetic isotope effect on the decarboxylation of malate by nicotinamide adenine dinucleotide malic enzyme from Crassula argentea is 1.0199 +/- 0.0006 with proteo L-malate-2-H and 1.0162 +/- 0.0003 with malate-2-d. The primary deuterium isotope effect is 1.45 +/- 0.10 on V/K and 1.93 +/- 0.13 on Vmax. This indicates a stepwise conversion of malate to pyruvate and CO2 with hydride transfer preceding decarboxylation, thereby suggesting a discrete oxaloacetate intermediate. This is in agreement with the stepwise nature of the chemical mechanism of other malic enzymes despite the Crassula enzyme's inability to reduce or decarboxylate oxaloacetate. Differences in morphology and allosteric regulation between enzymes suggest specialization of the Crassula malic enzyme for the physiology of crassulacean acid metabolism while maintaining the catalytic events found in malic enzymes from animal sources.     

Effect of thiol reagents on the activity of NADP-dependent malate dehydrogenase isolated from bovine adrenal cortex cytoplasm

NADP-dependent malate dehydrogenase was rapidly inactivated in the presence of mercurous chloride. Titration of malate dehydrogenase by 5,5'-dithiobis (2-nitrobenzoic acid) (DTNB) in a solution of 8 M urea revealed 18 SH groups per molecule of the enzyme. Eight sulphydryl groups reacted with DTNB in native malate dehydrogenase and their modification was not accompanied by a loss of the enzyme activity. The interaction of p-chloromercury benzoate (PCMB) with malate dehydrogenase resulted in a 70% decrease in the enzyme activity. The binding of the thiol reagents by the malate dehydrogenase molecule appreciably increased the Michaelis constant value for the substrate. In the presence of magnesium ions, NADP and malate did not affect the process of malate dehydrogenase modification by DTNB and did not protect the enzyme from the inactivation by PCMB. It is suggested from the data obtained that the sulphyryl groups are involved in maintaining the active conformation of the enzyme.     

Isolation and characterization of NADP+-linked isocitrate dehydrogenase of germinating pea seeds (Pisum sativum)

NADP+-linked isocitrate dehydrogenase (E.C.1.1.1.42) has been purified to homogeneity from germinating pea seeds. The enzyme is a tetrameric protein (mol wt, about 146,000) made up of apparently identical monomers (subunit mol wt, about 36,000). Thermal inactivation of purified enzyme at 45 degrees and 50 degrees C shows simple first order kinetics. The enzyme shows optimum activity at pH range 7.5-8. Effect of substrate [S] on enzyme activity at different pH (6.5-8) suggests that the proton behaves formally as an "uncompetitive inhibitor". A basic group of the enzyme (site) is protonated in this pH range in the presence of substrate only, with a pKa equal to 6.78. On successive dialysis against EDTA and phosphate buffer, pH 7.8 at 0 degrees C, yields an enzymatically inactive protein showing kinetics of thermal inactivation identical to the untreated (native) enzyme. Maximum enzyme activity is observed in presence of Mn2+ and Mg2+ ions (3.75 mM). Addition of Zn2+, Cd2+, Co2+ and Ca2+ ions brings about partial recovery. Other metal ions Fe2+, Cu2+ and Ni2+ are ineffective.     

Evidence for essential carboxyls in the cation-binding domain of the Na,K-ATPase.

Treatment of isolated canine renal Na,K-ATPase with a stable diazomethane analog, 4-(diazomethyl)-7-(diethylamino)-coumarin (DEAC), results in enzyme inactivation. The inactivation rate was dramatically increased when the enzyme was treated with DEAC in the presence of ATP and Mg2+ (in imidazole buffer) or Pi and Mg2+, conditions which produce enzyme phosphorylation. Inactivation in the presence of Pi and Mg2+ could be partially prevented by Na+ and almost completely prevented by K+. The quantity of DEAC covalently bound to the Na,K-ATPase was determined spectrophotometrically. The extent of inactivation was linearly related to the amount of K-protectable DEAC incorporation. Complete inactivation of ATPase activity occurred with 2.14 +/- 0.18 nmol of DEAC covalently bound/mg of protein. This suggests that only 1 or 2 carboxyl residues/catalytic center (estimated by high affinity ADP binding) are involved in the modification leading to inactivation. The modified enzyme exhibited normal levels of high affinity [3H]ADP (and hence ATP) binding, thus, the nucleotide-binding domain of the enzyme seems unaffected by the modification. In contrast, under conditions where native enzyme was able to occlude 3.82 nmol of K+ ions/mg of protein, DEAC-modified enzyme occluded only 0.33 nmol of K+ ions. Na+ occlusion by the enzyme (in the presence of oligomycin) was also reduced (by 80%) following treatment with DEAC. Phosphorylation by [32P]inorganic phosphate and Na(+)-activated phosphorylation of the modified enzyme with [32P]ATP yielded reduced levels of phosphoenzyme (about 36%) compared to native enzyme. The DEAC-modified [32P]phosphoenzyme formed from [32P]ATP was insensitive to the addition of K+ ions, under conditions which led to the rapid hydrolysis of native phosphoenzyme. Gel electrophoresis of modified protein revealed strong fluorescence labeling of the alpha-subunit, which was substantially reduced if treatment with DEAC was performed in the presence of K+ ions. Partial tryptic digestion and electrophoretic analysis revealed normal degradation patterns in the presence of ADP (E1 form) but the typical patterns, seen with K+ ions (E2K) or Na+ ions (E1Na) in native enzyme, were absent. A typical E2-like tryptic degradation pattern was seen, however, in the presence of vanadate ions and ouabain, suggesting that the modification does not freeze the enzyme in an E1 conformation and that the enzyme is still able to undergo the E1E2 conformational transition after modification. Our results suggest that a small number of carboxyl residues in the sodium pump alpha-subunit (perhaps one) are essential for K+ and Na+ binding and stabilizing the occluded enzyme cation forms. Esterification of the carboxyl groups by DEAC inactivates the enzyme.(ABSTRACT TRUNCATED AT 400 WORDS)     

Characterization of the zinc binding site of bacterial phosphotriesterase.

The bacterial phosphotriesterase has been found to require a divalent cation for enzymatic activity. This enzyme catalyzes the detoxification of organophosphorus insecticides and nerve agents. In an Escherichia coli expression system significantly higher concentrations of active enzyme could be produced when 1.0 mM concentrations of Mn2+, Co2+, Ni2+, and Cd2+ were included in the growth medium. The isolated enzymes contained up to 2 equivalents of these metal ions as determined by atomic absorption spectroscopy. The catalytic activity of the various metal enzyme derivatives was lost upon incubation with EDTA, 1,10-phenanthroline, and 8-hydroxyquinoline-5-sulfonic acid. Protection against inactivation by metal chelation was afforded by the binding of competitive inhibitors, suggesting that at least one metal is at or near the active site. Apoenzyme was prepared by incubation of the phosphotriesterase with beta-mercaptoethanol and EDTA for 2 days. Full recovery of enzymatic activity could be obtained by incubation of the apoenzyme with 2 equivalents of Zn2+, Co2+, Ni2+, Cd2+, or Mn2+. The 113Cd NMR spectrum of enzyme containing 2 equivalents of 113Cd2+ showed two resonances at 120 and 215 ppm downfield from Cd(ClO4)2. The NMR data are consistent with nitrogen (histidine) and oxygen ligands to the metal centers.     

Protein engineering of xylose (glucose) isomerase from Actinoplanes missouriensis. 3. Changing metal specificity and the pH profile by site-directed mutagenesis.

Aldose-ketose isomerization by xylose isomerase requires bivalent cations such as Mg2+, Mn2+, or Co2+. The active site of the enzyme from Actinoplanes missouriensis contains two metal ions that are involved in substrate binding and in catalyzing a hydride shift between the C1 and C2 substrate atoms. Glu 186 is a conserved residue located near the active site but not in contact with the substrate and not with a metal ligand. The E186D and E186Q mutant enzymes were prepared. Both are active, and their metal specificity is different from that of the wild type. The E186Q enzyme is most active with Mn2+ and has a drastically shifted pH optimum. The X-ray analysis of E186Q was performed in the presence of xylose and either Mn2+ or Mg2+. The Mn2+ structure is essentially identical to that of the wild type. In the presence of Mg2+, the carboxylate group of residue Asp 255, which is part of metal site 2 and a metal ligand, turns toward Gln 186 and hydrogen bonds to its side-chain amide. Mg2+ is not bound at metal site 2, explaining the low activity of the mutant with this cation. Movements of Asp 255 also occur in the wild-type enzyme. We propose that they play a role in the O1 to O2 proton relay accompanying the hydride shift.     

Contributions of valine-292 in the nicotinamide binding site of liver alcohol dehydrogenase and dynamics to catalysis

The participation of Val-292 in catalysis by alcohol dehydrogenase and the involvement of dynamics were investigated. Val-292 interacts with the nicotinamide ring of the bound coenzyme and may facilitate hydride transfer. The substitution of Val-292 with Ser (V292S) increases the dissociation constants for the coenzymes (NAD(+) by 50-fold, NADH by 75-fold) and the turnover numbers by 3-7-fold. The V292S enzyme crystallized in the presence of NAD(+) and 2,3,4,5,6-pentafluorobenzyl alcohol has an open conformation similar to the structure of the wild-type apo-enzyme, rather than the closed conformation observed for ternary complexes with wild-type enzyme. The V292S substitution perturbs the conformational equilibrium of the enzyme and decreases the kinetic complexity, which permits study of the hydride transfer step with steady-state kinetics. Eyring plots show that the DeltaH for the oxidation (V(1)) of the protio and deuterio benzyl alcohols is 13 kcal/mol and that the kinetic isotope effect of 4.1 is essentially temperature-independent. Eyring plots for the catalytic efficiency for reduction of benzaldehyde (V(2)/K(p)) with NADH or NADD are distinctly convex, being temperature-dependent from 5 to 25 degrees C and temperature-independent from 25 to 50 degrees C; the kinetic isotope effect of 3.2 for V(2)/K(p) is essentially independent of the temperature. The temperature dependencies and isotope effects for V(1) and V(2)/K(p) are not adequately explained by semiclassical transition state theory and are better explained by hydride transfer occurring through vibrationally assisted tunneling.     

Interaction of anions and divalent metal ions with phosphoenolpyruvate carboxykinase.

The catalytic activity of phosphoenolpyruvate carboxykinase in rat liver cytosol is stimulated by incubating with Fe2+, Mn2+, Co2+, and Cd2+. When purified, the enzyme no longer responds to Fe2+, Co2+, or Cd2+ but retains a response to Mn2+. Low concentrations of SO4(2-) in the incubation medium with enzyme and divalent transition metal allow stimulation by Fe2+ and Co2+ and enhance the response to Mn2+. Under identical conditions, orthophosphate with Fe2+ is a potent inhibitor of the enzyme (half-maximal inhibition at 50 muM). A thiol is required in the incubation medium for the effects of Fe2+ plus sulfate or orthophosphate to be expressed. The magnitude of these effects depends on the thiol concentration. Dithiothreitol is more effective than GSH and activation by sulfate plus Fe2+ appears to require the reduced form of dithiothreitol. Sulfate ion is not considered to be the physiological Fe2+-activator of P-enolpyruvate carboxykinase in rat liver cytosol, as this function is fulfilled by a newly discovered liver protein. Knowledge concerning the interaction of Fe2+ and sulfate with the enzyme may be useful in examining their interaction between the enzyme, ferrous ion, and this activator protein.     

Kinetics of the reaction between 5,5′-dithiobis[2-nitrobenzoic acid] and the sulphydryl group in Zn-dependent β-lactamase II

The kinetics of the reaction of the thiol residue in Zn²⁺-dependent β-lactamase II with 5,5′-dithiobis[2-nitrobenzoic acid], and the concomitant inactivation revealed that both events take place at the same rate. The inactivation could not be reverted by incubation with Zn²⁺ or by using a substrate concentration about eight times the K_m of the enzyme. EDTA incubation also produced inactivation of the enzyme, although it was reverted by increasing the substrate concentration in the assay. A dual role is proposed for Zn²⁺ in β-lactamase. The kinetic analysis of the thiol modification and the concomitant inactivation is in agreement with previous reports on the implication of the metal ion in catalysis. A role in stabilizing the native structure of the enzyme is also suggested.     

Proper positioning of the nicotinamide ring is crucial for the Ascaris suum malic enzyme reaction

The mitochondrial NAD-malic enzyme catalyzes the oxidative decarboxylation of malate to pyruvate and CO2. The role of the dinucleotide substrate in oxidative decarboxylation is probed in this study using site-directed mutagenesis to change key residues that line the dinucleotide binding site. Mutant enzymes were characterized using initial rate kinetics, and isotope effects were used to obtain information on the contribution of these residues to binding energy and catalysis. Results obtained for the N479 mutant enzymes indicate that the hydrogen bond donated by N479 to the carboxamide side chain of the nicotinamide ring is important for proper orientation in the hydride transfer step. The stepwise oxidative decarboxylation mechanism observed for the wt enzyme changed to a concerted one, which is totally rate limiting, for the N479Q mutant enzyme. In this case, it is likely that the longer glutamine side chain causes reorientation of malate such that it binds in a conformation that is optimal for concerted oxidative decarboxylation. Converting N479 to the shorter serine side chain gives very similar values of KNAD, Kmalate, and isotope effects relative to wt, but V/Et is decreased 2 000-fold. Data suggest an increased freedom of rotation, resulting in nonproductively bound cofactor. Changes were also made to two residues, S433 and N434, which interact with the nicotinamide ribose of NAD. In addition, N434 donates a hydrogen bond to the beta-carboxylate of malate. The KNAD for the S433A mutant enzyme increased by 80-fold, indicating that this residue provides significant binding affinity for the dinucleotide. With N434A, the interaction of the residue with malate is lost, causing the malate to reorient itself, leading to a slower decarboxylation step. The longer glutamine and methionine side chains stick into the active site and cause a change in the position of malate and/or NAD resulting in more than a 104-fold decrease in V/Et for these mutant enzymes. Overall, data indicate that subtle changes in the orientation of the cofactor and substrate dramatically influence the reaction rate.     

pH variation of the kinetic parameters and the catalytic mechanism of malic enzyme.

The pH variation of the kinetic parameters for the oxidative decarboxylation of L-malate and decarboxylation of oxalacetate catalyzed by malic enzyme has been used to gain information on the catalytic mechanism of this enzyme. With Mn2+ as the activator, an active-site residue with a pK of 5.4 must be protonated for oxalacetate decarboxylation and ionized for the oxidative decarboxylation of L-malate. With Mg2+ as the metal, this pK is 6, and, at high pH, V/K for L-malate decreases when groups with pKs of 7.8 and 9 are deprotonated. The group at 7.8 is a neutral acid (thought to be water coordinated to Mg2+), while the group at 9 is a cationic acid such as lysine. The V profile for reaction of malate shows these pKs displaced outward by 1.4 pH units, since the rate-limiting step is normally TPNH release, and the chemical reaction, which is pH sensitive, is 25 times faster. TPN binding is decreased by ionization of a group with pK 9.3 or protonation of a group with pK 5.3. The pH variation of the Km for Mg shows that protonation of a group with pK 8.7 (possibly SH) decreases metal binding in the presence of malate by a factor of 1400, and in the absence of malate by a factor of 20. A catalytic mechanism is proposed in which hydride transfer is accompanied by transfer of a proton to the group with pK 5.4-6, and enolpyruvate is protonated by water coordinated to the Mg2+ (pK 7.8) after decarboxylation and release of CO2.     

Effect of ferric and cupric ions on the inactivation rate of dextransucrase

When ferric ion was added to solutions of the enzyme dextransucrase, first-order followed by second-order inactivation behavior was observed. The initial rapid activity loss was attributed to a ferric ion interacting with the thiol group of the native monomer to form a less active enzyme-ion complex; the second inactivation stage involved enzyme-ion complex aggregation and disulfide cross-link formation. In contrast, Cu²⁺ ion inactivation demonstrated simple first-order kinetics. As with Fe³⁺, Cu²⁺ ions can form complexes with enzyme thiol groups. However, unlike ferric ions, cupric ions can also strongly interact with the imidazole ring of histidine. Since the dextransucrase active site contains two key histidines, imidazole-cupric-ion interactions could potentially inhibit enzymatic activity. Thus, it was hypothesized that first-order Cu²⁺ inactivation kinetics involved the adsorption of this ion to the enzyme's activity site. The addition of a reducing agent such as dithiothreitol can inhibit the second enzyme aggregation stage by breaking disulfide cross-links but cannot restrict the initial formation of metal-enzyme complexes.     

Determination of the mechanism of human malic enzyme with natural and alternate dinucleotides by isotope effects.

Human malic enzyme was studied by steady state kinetics, deuterium isotope effects, and 13C isotope effects with both the physiological dinucleotide cofactor and several alternate cofactors. The log V vs pH profile with NAD revealed two pK(a) values too close to be separately determined, but with an average value of 7.33. The log V/K vs pH profile with NAD revealed two pK(a) values at 7.4 and 5.6. Deuterium and 13C isotope effects indicate that the mechanism of human malic enzyme is stepwise with both NAD and epsilonNAD, but that hyperconjugation in the transition state for hydride transfer is detectable only with the former. With thioNAD and APAD, the isotope effects do not clearly indicate whether the mechanism is stepwise or concerted. The intrinsic 13C isotope effect for decarboxylation was calculated to be 1.0485 by measurement of the partition ratio of oxaloacetate in the presence of NADH and human malic enzyme (decarboxylation to pyruvate/reduction to malate = 2.33). The isotope effect and partitioning data suggest that the energy barrier for decarboxylation of oxaloacetate is not as high relative to the barrier for reduction of oxaloacetate as with the chicken liver enzyme.     

Effects of di-isopropyl phosphorofluoridate on rat liver microsomal and lysosomal beta-glucuronidase

N-Bromosuccinimide completely inactivated the cellulase, and titration experiments showed that oxidation of one tryptophan residue per cellulase molecule coincided with 100% inactivation. CM-cellulose protected the enzyme from inactivation by N-bromosuccinimide. The cellulase was inhibited by active benzyl halides, and reaction with 2-hydroxy-5-nitrobenzyl bromide resulted in the incorporation of 2.3 hydroxy-5-nitrobenzyl groups per enzyme molecule; one tryptophan residue was shown to be essential for activity. Diazocarbonyl compounds in the presence of Cu2+ ions inhibited the enzyme. The pH-dependence of inactivation was consistent with the reaction occurring with a protonated carboxyl group. Carbodi-imide inhibited the cellulase, and kinetic analysis indicated that there was an average of 1 mol of carbodi-imide binding to the cellulase during inactivation. Treatment of the cellulase with diethyl pyrocarbonate resulted in the modification of two out of the four histidine residues present in the cellulase. The modified enzyme retained 40% of its original activity. Inhibition of cellulase activity by the metal ions Ag+ and Hg2+ was ascribed to interaction with tryptophan residues, rather than with thiol groups.