Construction and characterization of new cloning vehicles. IV. Deletion derivatives of pBR322 and pBR325

In vitro recombinant DNA experiments involving restriction endonuclease fragments derived from the plasmids pBR322 and pBR325 resulted in the construction of two new cloning vehicles. One of these plasmids, designated pBR327, was obtained after an EcoRII partial digestion of pBR322. The plasmid pBR327 confers resistance to tetracycline and ampicillin, contains 3273 base pairs (bp) and therefore is 1089 bp smaller than pBR322. The other newly constructed vector, which has been designated pBR328, confers resistance to chloramphenicol as well as the two former antibiotics. This plasmid contains unique HindIII, BamHI and SalI sites in the tetracycline resistance gene, unique PvuI and PstI sites in the ampicillin resistance gene and unique EcoRI, PvuII and BalI sites in the chloramphenicol resistance gene. The pBR328 plasmid contains approx. 4900 bp.     

The site-specific deletion in plasmid pBR322

The formation of a deletion derivative of plasmid pBR322, designated pBR322 delta 1, was observed during cloning of various eukaryotic DNAs, when the BamHI site of the plasmid vector was used for construction of the recombinant molecules. The restriction analysis of six independently isolated pBR322 delta 1 plasmids allowed establishment of their complete identity. Similar deletion derivatives were also formed as a result of transformation of Escherichia coli cells by the linear form of vector pBR322 produced by BamHI cleavage, but not by SalI or HindIII. The endpoints of the deletion in one of the pBR322 delta 1 plasmids occurred at positions 375 and 16666 bp from the EcoRI site, as determined by sequence analysis. Formation of pBR322 delta 1 is most probably due to site-specific recombination between the sequence in the 1666-1670 bp region and the BamHI end of the linear pBR322 molecule. THe deletion was not controlled by the recA system of the host bacteria.     

A set of synthetic oligodeoxyribonucleotide primers for DNA sequencing in the plasmid vector pBR322

Seven oligonucleotide primers complementary to the plasmid vector pBR322 at positions adjacent to five of the unique restriction endonuclease cleavage sites (EcoRI, HindIII, BamHI, SalI and PstI) have been chemically synthesized. The polarity of the primers is such that any DNA inserted at one or a combination of two of the above restriction sites may be sequenced by the chain termination method using one of the synthetic DNA primers. One of the primers for sequencing inserts at the PstI site of pBR322 is also complementary to the M13 phage vector designated bla6. This set of universal primers is useful for rapid sequence determination of DNA cloned into pBR322 or M13bla6.     

An alternative nonradioactive method for labeling DNA using biotin

An alternative nonradioactive labeling method and a highly sensitive technique for detecting specific DNA sequences are described. The labeling method requires the "Klenow" fragment of DNA polymerase I and random hexanucleotides (synthesized or naturally extracted) as a primer for the production of highly sensitive DNA probes. The system has three main steps: (i) labeling of DNA with biotinylated 11-dUTP; (ii) detection of biotinylated DNA by a one-step procedure with streptavidin-alkaline phosphatase complex; (iii) blocking of background with Tween 20. Twenty attograms (2 X 10(-17) g) of pBR322 plasmid DNA was detected by dot-blot hybridization. Upon Southern blot hybridization, 7.4 fg (7.4 X 10(-15) g) of pBR322 HindIII DNA was detected using the biotinylated pBR322 plasmid DNA probe; 40.8 ag and 7.4 fg of lambda HindIII DNA were detected with the biotinylated whole lambda DNA probe by dot and Southern blot hybridization, respectively. Specific bands were also detected with the biotinylated argininosuccinolyase probe upon Northern blotting of mouse poly(A+) RNA. Further applications for in situ hybridization are also described.     

Cloning and cleavage site mapping of DNA from bovine herpesvirus 1 (Cooper strain).

Sequences representative of most of the bovine herpesvirus 1 (Cooper strain) DNa were cloned in the plasmid vector pBR322 at the HindIII site. EcoRI, HpaI, and BamHI restriction endonuclease sites were mapped in each of the cloned fragments, and this information was used to construct a restriction endonuclease cleavage site map of the entire viral genome for the four enzymes.     

Cloning of bacteriophage T5 DNA fragments in the plasmid pBR322. Analysis of recombinant plasmids by the method of bonding with RNA-polymerase from Escherichia coli on nitrocellulose filters

DNA of bacteriophage T5 was hydrolyzed with restriction endonucleases HindIII and BamHI, and subjected to the combined hydrolysis with BamHI+EcoRI and BamHI+ +HindIII. Fragments obtained were cloned in the plasmid pBR322. About 17% of T5 genome were recovered in recombinant plasmids. Cloned fragments were localized on the physical map of the phage by restriction analysis and Southern hybridization. With the aim of direct cloning of T5 promoters, PstI/HindIII fragments were inserted into pBR322 followed by selection of recombinants on ApsTCr phenotype. Binding of BsuRI and AluI fragments of hybrid plasmids with E. coli RNA polymerase was studied by nitrocellulose filter assay. The fragments, which were capable to form heparin resistant complexes were identified.     

Cloning the genetic determinant of alpha-hemolysin and obtaining a series of insertional mutations in this determinant by the transposon Tn1000

Functionally active genetic determinant of alpha-hemolysin was cloned. Hemolytic plasmid pHly195 was used as a donor of the determinant and pBR322 plasmid served as recipient. Cloning was done with a help of HindIII restriction endonuclease. The recombinant plasmid obtained represents pBR322 plasmid with the built-in fragment of 7.4 kb containing genes of functionally active determinant of alpha-hemolysin. Restriction map was constructed using HindIII, EcoRI, BamHI and SalI restriction endonucleases. Insertional mutagenesis was carried out with the help of the Tn1000 transposon. Plasmid DNAs were isolated from insertional mutants of Hly- phenotype and treated with EcoRI, SalI and BamHI. On the basis of the sizes of restriction fragments of the mutant plasmid DNAs localization and orientation of insertions of Tn1000 into the cloned determinant of alpha-hemolysin were determined.     

Expression of the replication region of phage lambda DNA cloned into pBR322 in E. coli minicells

Replication region of bacteriophage lambda DNA was cloned into pBR322 plasmid by the use of two restriction enzymes--PstI and HindIII. The restriction analysis of four obtained plasmids revealed that lambda DNA was cloned in both orientations. Recombinant plasmids were transferred to the minicell-producing strain of E. coli and synthesis of the plasmid-mediated proteins was analysed by polyacrylamide-gel electrophoresis. All four recombinant plasmids produced lambda DNA replication proteins pO and pP as well as some proteins specific for pBR322. The orientation of cloned fragment did not affect the synthesis of lambda DNA replication proteins.     

Molecular cloning of part of the mitochondrial DNA of Drosophila melanogaster

We report the construction of recombinant plasmids containing part of the mitochondrial DNA of $\text{Drosophila}\text{melanogaster}$. Of the four fragments of this DNA generated by the restriction endonuclease HindIII, two were successfully cloned into the HindIII site of the plasmid pCM2. Unexpectedly the other two fragments could not be isolated by cloning into the HindIII site of either pCM2 or pBR322. Part of a third fragment, containing the gene for the large ribosomal RNA, was incorporated into the PstI site of pBR322. We show that this recombinant plasmid contains sequences complementary to an abundant RNA species which is present in $\text{Drosophila}$ embryos and which binds to oligo-dT-cellulose.     

Escherichia coli glycerol kinase. Cloning and sequencing of the glpK gene and the primary structure of the enzyme

The glpK gene, which codes for Escherichia coli K-12 glycerol kinase (EC 2.1.7.30, ATP:glycerol 3-phosphotransferase), has been cloned into the HindIII site of pBR322. The gene was contained in a 2.8-kilobase DNA fragment which was obtained from a lambda transducing bacteriophage, lambda dglpK100 (Conrad, C.A., Stearns, G.W., III, Prater, W.E., Rheiner, J.A., and Johnson, J.R. (1984) Mol. Gen. Genet. 195, 376-378). The DNA sequence of 2 kilobases of the cloned HindIII fragment was obtained using the dideoxynucleotide method. The start of the open reading frame for the glpK gene was identified from the N-terminal sequence of the first 22 amino acid residues of the purified enzyme, which was determined by automated Edman degradation. The open reading frame codes for a protein of 502 amino acids and a molecular weight of 56,106 which is in good agreement with the value previously determined by sedimentation equilibrium. The primary structure of the protein as deduced from the gene sequence was corroborated by the isolation and sequencing of four tryptic peptides, which were found to occur at the following amino acid locations: 173-177, 203-211, 279-281, 464-468. The N-terminal sequence of the purified enzyme shows that the enzyme undergoes post-translational processing. Restriction digestion as well as DNA sequencing of the supercoiled plasmid shows that the HindIII fragment is inserted into pBR322 such that the glpK gene is transcribed in a counterclockwise direction. Examination of the upstream DNA sequence reveals two possible promoters of essentially the same efficiency: the P1 promoter of pBR322 and a hybrid promoter which contains both bacterial and pBR322 DNA sequences.     

Recovery of activity of the gene coding for tetracycline resistance in the plasmin pBRS188

The spontaneous recovery of activity of tet gene deleted of the promoter region was studied. Plasmid pBRS188 was used as a model for studying this problem. The plasmid has the fragment of tet gene of pBR322, from which it originates, between the sites of restriction endonucleases EcoRI and HindIII cleavage resulting in inactivation of tet promoter. E. coli cells harbouring the plasmid were shown to revert the TcR phenotype with the frequency 10(-9). The gene activation coincided with intraplasmid recombination revealed by restriction analysis. In some cases the recovery of tet gene activity coincided with the formation of multimeric plasmids.     

Plasmid vectors for positive galactose-resistance selection of cloned DNA in Escherichia coli

Insertion of a HindIII-EcoRI fragment carrying part of the gal operon from lambda gal+ into pBR322 yields a plasmid (pAA3) which confers strong galactose sensitivity on E. coli strains deleted for the gal operon. Sensitivity to galactose is caused by the expression of kinase and transferase (but not epimerase) genes from a promoter located in the tet gene of pBR322. Insertion of a DNA fragment carrying Tn9 at the HindIII junction blocks gal expression and produces a galactose-resistant phenotype. Hence, galactose resistance can be used to select DNA fragments cloned at the HindIII site. The system was used efficiently for cloning lambda, yeast, and human DNA. The cloned fragments can be screened directly for the presence of promoters by testing for tetracycline resistance. Alternatively, these plasmids can be used as cosmids for cloning large fragments of DNA at a number of sites. Construction of several related vectors is described.     

Construction of a recombinant bacterial plasmid containing pro-alpha 1(I) collagen DNA sequences

A partially purified mRNA preparation enriched for chick collagen messenger RNA activity was used as template for the synthesis of double stranded cDNA. The cDNA was ligated into the HindIII site of the plasmid vector pBR322 and used to transform Escherichia coli x1776. One plasmid with an 800-base pair insert was shown to contain DNA sequences corresponding to Type I pro-alpha 1 collagen.     

Cloning and mapping of infA, the gene for protein synthesis initiation factor IF1.

The gene for translation initiation factor IF1, infA, has been identified by using two synthetic oligonucleotides to screen a Charon 30 library of Escherichia coli DNA. A recombinant lambda phage, C1921, was purified from a plaque positive for both probes. A 2.8 kb BglII fragment and a 2.0 kb HindIII fragment isolated from C1921 were subcloned into the BamHI and HindIII sites of pBR322 to yield pTB7 and pTH2 respectively. Synthesis of IF1 in maxicells transformed with pTB7 or pTH2 indicates the presence of inf A in both inserts. This was confirmed by DNA sequencing: a region was found that codes for a 8,119 dalton protein with an amino acid sequence corresponding to IF1. The chromosomal location of inf A was determined by mapping the closely linked beta-lactamase gene (Ampr) in pTB7 and pTH2. pTB7 and pTH2 were transformed into polA Hfr hosts, and integration of the plasmid by homologous recombination near inf A was selected on the basis of ampicillin resistance. The site of integration was confirmed by Southern blot analysis of restriction nuclease digested wild type and transformed genomic DNA. The Ampr marker (and therefore inf A) was mapped to about 20 minutes by Hfr interrupted matings and P1 transduction experiments. The structure and regulation of the inf A operon currently are being investigated.     

Molecular cloning and expression of the xylanase gene of alkalophilic Bacillus sp. strain C-125 in Escherichia coli.

The gene for xylanase A of alkalophilic Bacillus sp. strain C-125 was cloned in Escherichia coli with pBR322. The plasmid pCX311 contained 2.6- and 2.0-kilobase-pair HindIII fragments. The characteristics of the purified pCX311-encoded xylanase were the same as those of purified xylanase A from alkalophilic Bacillus sp. strain C-125.     

Cloning and endonuclease restriction analysis of argF and of the control region of the argECBH bipolar operon in Escherichia coli.

A 1.8 kb DNA fragment, liberated by endonuclease HindIII, contains the control region of the argECBH bipolar operon near one end and the weak secondary promoter of argH at the other extremity; it has been cloned in plasmid pBR322. The same plasmid vector has been used to clone the argF gene liberated from the chromosome by endonuclease BamHI. Restriction patterns for the two hybrid plasmids have been determined, using enzymes AluI, BglI, EcoRI, HaeIII, HincII, HindIII, HpaI and II, PstI and SalI. Two AluI sites situated on either side of and close to a HincII target delineate two short fragments covering the whole of the argECBH control region. The argF control elements are located in a region accessible to further dissection by BamHI, EcoRI, PstI and HindIII. Carriers of the argF plasmid produce extremely high amounts of ornithine carbamoyltransferase, a feature useful for purification of this enzyme.