Long‐range quantitative PCR for determining inactivation of adenovirus 2 by ultraviolet light

Aims

An extra‐long‐range quantitative PCR (LR‐qPCR) method was developed for estimating genome damage to adenovirus 2 caused by UV irradiation. The objective was to use LR‐qPCR as a rapid method to determine adenovirus UV inactivation.

Methods

The LR‐qPCR consisted of two steps: a long‐range PCR (up to 10 kb fragment) and a real‐time, quantitative (q) PCR for quantifying the products of the first PCR. We evaluated LR‐qPCR with adenovirus irradiated with medium‐pressure (MP, polychromatic emission) and low‐pressure (LP, 254 nm) mercury vapour lamps and compared results with cell culture infectivity.

Results

Using LR‐qPCR, a fragment of 6 kb estimated DNA damage in a linear relationship to doses between 0 and 20 mJ cm^?2, and a 1‐kb fragment related linearly to doses between 20 and 100 mJ cm^?2. The LR‐qPCR results for the 6‐kb fragment were similar to infectivity assays results for adenovirus exposed to MP UV. For adenovirus irradiated with LP lamps, LR‐qPCR results for the shorter fragment size (1 kb) were similar to reduction in viral infectivity. No difference was observed between 10 and 6 kb LR‐qPCR results.

Conclusion

The LR‐qPCR can be used as a tool for estimating DNA damage caused by UV in adenovirus. The LR‐qPCR results were related to reduction in viral infectivity.

Significance and Impact of the Study

The use of LR‐qPCR to determine DNA damage and estimate inactivation of adenovirus 2 from UV disinfection allows for same‐day results compared with >7 days required for cell culture. This accelerates adenovirus inactivation results for the water industry where adenovirus is used as a representative virus for crediting UV systems. This PCR approach provides a framework that can be used for other viral viability assays using the inhibition of amplification of viral nucleic acid after pretreatments, such as propidium monoazide, and for cellular biology studies of DNA damage.     

Determination of Tanshinones in Danshen (Salvia miltiorrhiza) by High‐Performance Liquid Chromatography with Fluorescence Detection after pre‐Column Derivatisation

Introduction

Tanshinones are a major class of bioactive ingredients in the traditional herbal medicines, Danshen (Salvia miltiorrhiza). A sensitive and reliable determination method for tanshinones is useful to ensure the quality of Danshen.

Objective

To develop a sensitive and selective analytical method for tanshinones by high‐performance liquid chromatography (HPLC) with fluorescence detection after pre‐column derivatisation.

Methodology

The proposed method depends on derivatisation reaction of tanshinones with 4‐carbomethoxybenzaldehyde and ammonium acetate forming intensely fluorescent imidazole derivative.

Results

The proposed method provided excellent sensitivity with the detection limits of 3.3 nM (66 fmol/injection), 3.2 nM (64 fmol/injection) and 2.0 nM (40 fmol/injection) for cryptotanshinone, tanshinone I and tanshinone IIA, respectively, without the necessity of complicated instrumentations. The developed method is successfully applied to quantify the contents of tanshinones in Danshen.

Conclusion

The developed method is the first analytical method for tanshinones by fluorescence detection. Since the derivatisation reaction is selective for the o‐quinone structure of tanshinone, the developed method will become a suitable mean for the discovering of tanshinone type diterpenoids from herbal samples. Copyright © 2017 John Wiley & Sons, Ltd.     

Flow‐injection method for the determination of iodide/iodine using Ru(bpy)33+–NADH chemiluminescence detection

A two‐channel flow‐injection (FI) method is reported for the determination of iodide and iodine by its enhancement effect on the Ru(bpy)₃³⁺–NADH chemiluminescence (CL) system. The limit of detection (3 s of blank) was 1.0 × 10^–9 mol/L iodide/iodine, with a sample throughput of 60/h. The calibration graphs over the range 1.0–50 × 10^–8 mol/L gave correlation coefficients of 0.9994 and 0.999 (n = 5) with relative standard deviations (RSD; n = 4) of 1.0–2.5%, respectively. The effects of interfering cations, anions and some organic compounds were also studied. The method was applied to iodized salts and pharmaceutical samples and the results obtained were in good agreement with the value quoted. The CL method developed was compared with spectrophotometric method. Copyright © 2008 John Wiley & Sons, Ltd.     

A laboratory high‐throughput glass chamber using dynamic headspace TD‐GC/MS method for the analysis of whole Brassica napus L. plantlet volatiles under cadmium‐related abiotic stress

Introduction

The dynamic headspace sampling technique using thermal desorption, gas chromatography‐mass spectrometry (TD‐GC/MS) is a powerful method for analysing plant emissions of volatile organic compounds (VOCs), and experiments performed in sterile and controlled conditions can be useful for VOC metabolism investigations.

Objective

The main purpose of this study was to set up a laboratory high‐throughput glass chamber for whole plant volatiles analysis. Brassica napus L. plantlets were tested with the developed system to better understand the relationship between low emission of induced terpene and cadmium (Cd)‐related abiotic stress.

Methodology

VOCs emitted by 28‐day‐old Brassica napus L. plantlets cultivated in vitro were trapped with our device using adsorbent cartridges that were desorbed with a thermal desorption unit before cryofocusing with a cooled injection system and programmable temperature vaporising inlet into an HP‐5 ms GC column. Terpene detection and quantitation from chromatogram profiles were acquired using selected ion monitoring (SIM) mode during full scan analysis and mass spectra were obtained with a quadrupole‐type mass spectrometer.

Results

The new trapping method produced reliable qualitative profiles of oilseed rape VOCs. Typical emissions of monoterpenes (myrcene, limonene) and sesquiterpenes (β‐elemene, (E,E)‐α‐farnesene) were found for the different concentrations tested. One‐way analysis of variance for quantitative results of (E,E)‐α‐farnesene emission rates showed a Cd concentration effect.

Conclusion

This inexpensive glass chamber has potential for wide application in laboratory sterile approach and replicated research. Moreover, the non‐invasive dynamic sampling technique could also be used to analyse volatiles under both abiotic and biotic stresses.     

Non‐destructive allometric estimates of above‐ground and below‐ground biomass of high‐mountain vegetation in the Andes

Aim

Studies that monitor high‐mountain vegetation, such as paramo grasslands in the Andes, lack non‐destructive biomass estimation methods. We aimed to develop and apply allometric models for above‐ground, below‐ground and total biomass of paramo plants.

Location

The paramo of southern Colombia between 1°09′N and 077°50′W, at 3,400 and 3,700 m a.s.l.

Methods

We established 61 1‐m² plots at random locations, excluding disturbed, inaccessible and peat bog areas. We measured heights and basal diameters of all vascular plants in these plots and classified them into seven growth forms. Near each plot, we sampled the biomass from plants of abundant genera, after having measured their height and basal diameter. Hence, we measured the biomass of 476 plants (allometric set). For each growth form we applied power‐law functions to develop allometric models of biomass against basal diameter, height, height x basal diameter and height × basal area. The best models were selected using AIC_c weights. Using the observed and predicted plant biomass of the allometric set we calculated absolute percentage errors using cross‐validation. The biomass of a plot was estimated by summing the predicted biomass of all plants in a plot. Confidence limits around these sums were calculated by bootstrapping.

Results

For groups of <20 plants the biomass predictions yielded large (>15%) errors. Applying groups that resembled the 1‐m² plots in density and composition, the errors for above‐ground and total biomass estimates were <15%. Across all plots, we obtained an above‐ground, below‐ground and total plot biomass of 329 ± 190, 743 ± 486 and 1011 ± 627 g/m² (mean ± SD), respectively. These values were within the range of biomass estimates obtained destructively in the tropical Andes.

Conclusions

In new applications, if target vegetation samples are similar regarding growth forms and genera to our allometric set, their biomass might be predicted applying our equations, provided they contain at least 50–100 plants. In other situations, we would recommend gathering additional biomass measurements from local plants to evaluate new regression equations.     

Herd prevalence of Enterobacteriaceae producing CTX‐M‐type and CMY‐2 β‐lactamases among Japanese dairy farms

Aims

To determine the herd prevalence of Enterobacteriaceae producing CTX‐M‐type extended‐spectrum β‐lactamases (ESBLs) among 381 dairy farms in Japan.

Methods and Results

Between 2007 and 2009, we screened 897 faecal samples using BTB lactose agar plates containing cefotaxime (2 μg ml^?1). Positive isolates were tested using ESBL confirmatory tests, PCR and sequencing for CTX‐M, AmpC, TEM and SHV. The incidence of Enterobacteriaceae producing CTX‐M‐15 (n = 7), CTX‐M‐2 (n = 12), CTX‐M‐14 (n = 3), CMY‐2 (n = 2) or CTX‐M‐15/2/14 and CMY‐2 (n = 4) in bovine faeces was 28/897 (3·1%) faecal samples. These genes had spread to Escherichia coli (n = 23) and three genera of Enterobacteriaceae (n = 5). Herd prevalence was found to be 20/381 (5·2%) dairy farms. The 23 E. coli isolates showed clonal diversity, as assessed by multilocus sequence typing and pulsed‐field gel electrophoresis. The pandemic E. coli strain ST131 producing CTX‐M‐15 or CTX‐M‐27 was not detected.

Conclusions

Three clusters of CTX‐M (CTX‐M‐15, CTX‐M‐2, CTX‐M‐14) had spread among Japanese dairy farms.

Significance and Impact of the Study

This is the first report on the prevalence of multidrug‐resistant CTX‐M‐15–producing E. coli among Japanese dairy farms.     

Effects of extracellular DNA and DNA‐binding protein on the development of a Streptococcus intermedius biofilm

Aims

The aim of this study was to clarify the effects of homologous and heterologous extracellular DNAs (eDNAs) and histone‐like DNA‐binding protein (HLP) on Streptococcus intermedius biofilm development and rigidity.

Methods and Results

Formed biofilm mass was measured with 0·1% crystal violet staining method and observed with a scanning electron microscope. The localizations of eDNA and extracellular HLP (eHLP) in formed biofilm were detected by staining with 7‐hydoxyl‐9H‐(1,3‐dichloro‐9,9‐dimethylacridin‐2‐one) and anti‐HLP antibody without fixation, respectively. DNase I treatment (200 U ml^?1) markedly decreased biofilm formation and cell density in biofilms. Colocalization of eHLP and eDNA in biofilm was confirmed. The addition of eDNA (up to 1 μg ml^?1) purified from Strep. intermedius, other Gram‐positive bacteria, Gram‐negative bacteria, or human KB cells into the Strep. intermedius culture increased the biofilm mass of all tested strains of Strep. intermedius, wild‐type, HLP‐downregulated strain and control strains. In contrast, the addition of eDNA (>1 μg ml^?1) decreased the biofilm mass of all Strep. intermedius strains.

Conclusions

These findings demonstrated that eDNA and eHLP play crucial roles in biofilm development and its rigidity.

Significance and Impact of the Study

eDNA‐ and HLP‐targeting strategies may be applicable to novel treatments for bacterial biofilm‐related infectious diseases.     

A qualitative and quantitative HPTLC densitometry method for the analysis of cannabinoids in Cannabis sativa L.

Introduction – Cannabis and cannabinoid based medicines are currently under serious investigation for legitimate development as medicinal agents, necessitating new low‐cost, high‐throughput analytical methods for quality control. Objective – The goal of this study was to develop and validate, according to ICH guidelines, a simple rapid HPTLC method for the quantification of Δ⁹‐tetrahydrocannabinol (Δ⁹‐THC) and qualitative analysis of other main neutral cannabinoids found in cannabis. Methodology – The method was developed and validated with the use of pure cannabinoid reference standards and two medicinal cannabis cultivars. Accuracy was determined by comparing results obtained from the HTPLC method with those obtained from a validated HPLC method. Results – Δ⁹‐THC gives linear calibration curves in the range of 50–500 ng at 206 nm with a linear regression of y = 11.858x + 125.99 and r² = 0.9968. Conclusion – Results have shown that the HPTLC method is reproducible and accurate for the quantification of Δ⁹‐THC in cannabis. The method is also useful for the qualitative screening of the main neutral cannabinoids found in cannabis cultivars. Copyright © 2009 John Wiley & Sons, Ltd.     

Assessment of poly‐l‐lysine dendrigrafts for virus concentration in water: use of MS2 bacteriophage as proof of concept

Aims

Virus detection has often been difficult due to a low concentration in water. In this study, we developed a new procedure based on concentration of virus particles on an innovative support: poly‐l ‐lysine dendrigrafts (DGL), coupled with directed nucleic acid extraction and real‐time PCR quantification.

Methods and Results

This method was evaluated using the bacteriophage MS2 as a model virus. This virus exhibited the size and structural properties of human pathogenic enteric viruses and has often been used to assess new supports of concentration. Moreover, this bacteriophage is also a faecal contamination indicator. In this study, many water filtration conditions were tested (volume of water, concentration, etc.), and more than 80% of bacteriophage were recovered after filtration on polymer, in most conditions. We demonstrated that the method was linear (slope = 0·99 ± 0·04 and Y intercept when x = ?0·02 ± 0·28), valid (as manipulators, tested concentrations, volumes of sample and batch of polymer did not have any influence on concentration) and sensitive (allowing to concentrate up to 16 600‐fold 1 l of sample and to detect and quantify down to 750 GC l^?1 and 7500 GC l^?1, respectively).

Conclusions

To conclude, this support exhibits high interest to retain viruses and to allow to detect low concentration of virus in water.

Significance and Impact of the Study

This study gives valuable advance in the methods of concentration and diagnosis of virus in water.     

Neuraminidase Inhibitors from marine‐derived actinomycete Streptomyces seoulensis

Aims

This work was performed to characterize new secondary metabolites with neuraminidase (NA) inhibitory activity from marine actinomycete strains.

Methods and Results

An actinomycete strain IFB‐A01, capable of producing new NA inhibitors, was isolated from the gut of shrimp Penasus orientalis and identified as Streptomyces seoulensis according to its 16S rRNA sequence (over 99% homology with that of the standard strain). Repeated chromatography of the methanol extract of the solid‐substrate culture of S. seoulensis IFB‐A01 led to the isolation of streptoseolactone ( 1 ), and limazepines G ( 2 ) and H ( 3 ). The structures of 1 – 3 were determined by a combination of IR, ESI‐MS, 1D (¹H and ¹³C NMR, and DEPT) and 2D NMR experiments (HMQC, HMBC, ¹H‐¹H COSY and NOESY). Compounds 1 – 3 showed significant inhibition on NA in a dose‐dependent manner with IC₅₀ values of 3·92, 7·50 and 7·37 μmol l^?1, respectively.

Conclusions

This is the first report of two new ( 1 and 2 ) and known ( 3 , recovered as a natural product for the first time in the work) NA inhibitors from the marine‐derived actinomycete S. seoulensis IFB‐A01.

Significance and Impact of the Study

The three natural NA inhibitors maybe of value for the development of drug(s) necessitated for the treatment of viral infections.     

Spaceflight‐induced enhancement of 2‐keto‐L‐gulonic acid production by a mixed culture of Ketogulonigenium vulgare and Bacillus thuringiensis

Two bacterial strains used for industrial production of 2‐keto‐L‐gulonic acid (2‐KLG), Ketogulonigenium vulgare 2 and Bacillus thuringiensis 1514, were loaded onto the spacecraft Shenzhou VII and exposed to space conditions for 68 h in an attempt to increase their fermentation productivities of 2‐KLG. An optimal combination of mutants B. thuringiensis 320 and K. vulgare 2194 (KB2194‐320) was identified by systematically screening the pH and 2‐KLG production of 16 000 colonies. Compared with the coculture of parent strains, the conversion rate of L‐sorbose to 2‐KLG by KB2194‐320 in shake flask fermentation was increased significantly from 82·7% to 95·0%. Furthermore, a conversion rate of 94·5% and 2‐KLG productivity of 1·88 g l^?1 h^?1 were achieved with KB2194‐320 in industrial‐scale fermentation (260 m³ fermentor). An observed increase in cell number of K2194 (increased by 47·8%) during the exponential phase and decrease in 2‐KLG reductase activity (decreased by 46·0%) were assumed to explain the enhanced 2‐KLG production. The results suggested that the mutants KB2194‐320 could be ideal substitutes for the currently employed strains in the 2‐KLG fermentation process and demonstrated the feasibility of using spaceflight to breed high‐yielding 2‐KLG‐producing strains for vitamin C production.

Significance and Impact of the Study

KB2194‐320, a combination of two bacterial strains bred by spaceflight mutation, exhibited significantly improved 2‐KLG productivity and hence could potentially increase the efficiency and reduce the cost of vitamin C production by the two‐step fermentation process. In addition, a new pH indicator method was applied for rational screening of K2, which dramatically improved the efficiency of screening.     

Comparison of gross body fat‐water magnetic resonance imaging at 3 Tesla to dual‐energy X‐ray absorptiometry in obese women

Objective:

Improved understanding of how depot‐specific adipose tissue mass predisposes to obesity‐related comorbidities could yield new insights into the pathogenesis and treatment of obesity as well as metabolic benefits of weight loss. We hypothesized that three‐dimensional (3D) contiguous “fat‐water” MR imaging (FWMRI) covering the majority of a whole‐body field of view (FOV) acquired at 3 Tesla (3T) and coupled with automated segmentation and quantification of amount, type, and distribution of adipose and lean soft tissue would show great promise in body composition methodology.

Design and Methods:

Precision of adipose and lean soft tissue measurements in body and trunk regions were assessed for 3T FWMRI and compared to dual‐energy X‐ray absorptiometry (DXA). Anthropometric, FWMRI, and DXA measurements were obtained in 12 women with BMI 30‐39.9 kg/m².

Results:

Test–retest results found coefficients of variation (CV) for FWMRI that were all under 3%: gross body adipose tissue (GBAT) 0.80%, total trunk adipose tissue (TTAT) 2.08%, visceral adipose tissue (VAT) 2.62%, subcutaneous adipose tissue (SAT) 2.11%, gross body lean soft tissue (GBLST) 0.60%, and total trunk lean soft tissue (TTLST) 2.43%. Concordance correlation coefficients between FWMRI and DXA were 0.978, 0.802, 0.629, and 0.400 for GBAT, TTAT, GBLST, and TTLST, respectively.

Conclusions:

While Bland–Altman plots demonstrated agreement between FWMRI and DXA for GBAT and TTAT, a negative bias existed for GBLST and TTLST measurements. Differences may be explained by the FWMRI FOV length and potential for DXA to overestimate lean soft tissue. While more development is necessary, the described 3T FWMRI method combined with fully‐automated segmentation is fast (<30‐min total scan and post‐processing time), noninvasive, repeatable, and cost‐effective.     

A fed‐batch based cultivation mode in Escherichia coli results in improved specific activity of a novel chimeric‐truncated form of tissue plasminogen activator

Aims

A novel chimeric‐truncated form of tissue‐type plasminogen activator (t‐PA) with improved fibrin affinity and resistance to PAI was successfully produced in CHO expression system during our previous studies. Considering advantages of prokaryotic expression systems, the aim in this study was to produce the novel protein in Escherichia coli (BL21) strain and compare the protein potency in batch and fed‐batch processes.

Methods and Results

The expression cassette for the novel t‐PA was prepared in pET‐28a(+). The E. coli expression procedure was compared in traditional batch and newly developed fed batch, EnBase^® Flo system. The protein was purified in soluble format, and potency results were identified using Chromolize t‐PA Assay Kit. The fed‐batch fermentation mode, coupled with a Ni‐NTA affinity purification procedure under native condition, resulted in higher amounts of soluble protein, and about a 30% of improvement in the specific activity of the resulted recombinant protein (46·66 IU mg^?1) compared to traditional batch mode (35·8 IU mg^?1).

Conclusions

Considering the undeniable advantages of expression in the prokaryotic expression systems such as E. coli for recombinant protein production, applying alternative methods of cultivation is a promising approach. In this study, fed‐batch cultivation methods showed the potential to replace miss‐folded formats of protein with proper folded, soluble form with improved potency.

Significance and Impact of the Study

Escherichia coli expression of recombinant proteins still counts for nearly 40% of marketed biopharmaceuticals. The major drawback of this system is the lack of appropriate post‐translational modifications, which may cause potency loss/decline. Therefore, applying alternative methods of cultivation as investigated here is a promising approach to overcome potency decrease problem in this protein production system.     

Multiplexed MRM‐based quantitation of candidate cancer biomarker proteins in undepleted and non‐enriched human plasma

An emerging approach for multiplexed targeted proteomics involves bottom‐up LC‐MRM‐MS, with stable isotope‐labeled internal standard peptides, to accurately quantitate panels of putative disease biomarkers in biofluids. In this paper, we used this approach to quantitate 27 candidate cancer‐biomarker proteins in human plasma that had not been treated by immunoaffinity depletion or enrichment techniques. These proteins have been reported as biomarkers for a variety of human cancers, from laryngeal to ovarian, with breast cancer having the highest correlation. We implemented measures to minimize the analytical variability, improve the quantitative accuracy, and increase the feasibility and applicability of this MRM‐based method. We have demonstrated excellent retention time reproducibility (median interday CV: 0.08%) and signal stability (median interday CV: 4.5% for the analytical platform and 6.1% for the bottom‐up workflow) for the 27 biomarker proteins (represented by 57 interference‐free peptides). The linear dynamic range for the MRM assays spanned four orders‐of‐magnitude, with 25 assays covering a 10³–10⁴ range in protein concentration. The lowest abundance quantifiable protein in our biomarker panel was insulin‐like growth factor 1 (calculated concentration: 127 ng/mL). Overall, the analytical performance of this assay demonstrates high robustness and sensitivity, and provides the necessary throughput and multiplexing capabilities required to verify and validate cancer‐associated protein biomarker panels in human plasma, prior to clinical use.     

Antibacterial aryl‐crowned polyketide from Bacillus subtilis associated with seaweed Anthophycus longifolius

Aims

Microbiological, biotechnological and chemical characterization of a previously undescribed aryl‐crowned polyketide from Bacillus subtilis MTCC 10403 isolated from brown seaweed Anthophycus longifolius with activity against opportunistic Gram‐negative food‐borne pathogenic bacterial strains.

Methods and Results

A culture‐dependent method was used to isolate heterotrophic B. subtilis associated with A. longifolius and assessed for its antimicrobial properties. Minimum inhibitory concentration (MIC) of the title compound against the test pathogens was analysed by microtube dilution coupled with the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide‐based colorimetric endpoint detection. Bacillus subtilis MTCC 10403 was found to be antagonistic against Gram‐negative food‐borne pathogenic Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Salmonella enterica serotype Typhi, Aeromonas hydrophila and Vibrio sp. (diameter of zone of growth inhibition 13–22 mm). Bacillus subtilis was assessed for the presence of secondary metabolite coding polyketide synthase (pks) gene ( KC589397 , 700‐bp gene product) and carboxylate siderophore framework in the aryl‐crowned polyketide designated as 7‐O‐6′‐(2″‐acetylphenyl)‐5′‐hydroxyhexanoate‐macrolactin by exhaustive spectroscopic techniques. The MIC assay showed that the reference antibiotics tetracycline and ampicillin were active at 25 μg ml^?1 against the test pathogens, whereas the newly isolated polyketide displayed anti‐infective properties against E. coli, A. hydrophilla, P. aeruginosa and Vibrio sp. at a lower concentration (MIC <13 μg ml^?1). The MIC of the aryl macrolactin against K. pneumoniae was comparable with that of the referral antibiotics (~25 μg ml^?1). The mode of antimicrobial action of acryl‐crowned macrolactin was found to be iron chelating similar to siderophores. Putative biosynthetic pathway of the pks gene product further validated its molecular attributions.

Conclusions

This study recognized new variant of antimicrobial aryl‐crowned polyketide bearing methyl 6′‐(2″‐acetylphenyl)‐5′‐hydroxyhexanoate moiety at the C‐7 position of the macrolactin system from A. longifolius‐associated bacterium B. subtilis.

Significance and Impact of the Study

This study revealed seaweed‐associated micro‐organisms as promising biological strata to produce new‐generation anti‐infective agents.     

Long‐lived electrochemiluminescence of ruthenium (II) complexes/tri‐n‐propylamine in aqueous solutions

Although the clinical use of immunoassays based on the oxidative‐reduction electrochemiluminescence (ECL) of tris(2,2′‐bipyridine)ruthenium (II)/tri‐n‐propylamine has been a great success, elucidation of the ECL generation mechanism still remains unsatisfactory. We report here our experimental observations of long‐lived luminescence that remains detectable for several seconds after termination of electrochemical heterogeneous oxidation. Long‐lived luminescence was observed in both a surfactant‐free buffer and a surfactant‐containing broadly used commercial buffer under different conditions. The slow decay of emission seems to have been unnoticed in previous ECL mechanistic studies. Within the frame of the reaction schemes so far proposed, its origin is inconclusively ascribed to the reductive‐oxidation process of ruthenium (II) complex, that is Ru(bpy)₃²⁺ → Ru(bpy)₃¹⁺ → Ru(bpy)₃²⁺* → Ru(bpy)₃²⁺ with the involvement of the tri‐n‐propylamine‐derived radical cation. It is anticipated that long‐lived ECL will suggest a research approach to separate some homogeneous reactions from the complicated reaction system and therefore help to resolve the mechanistic mystery.     

Biocontrol potential of phylloplane bacterium Ochrobactrum anthropi BMO‐111 against blister blight disease of tea

Aims

The present study was carried out to screen the phylloplane bacteria from tea for antagonism against grey blight caused by Pestalotiopsis theae and blister bight caused by Exobasidium vexans and to further evaluate the efficient isolates for disease control potential under field condition.

Methods and Results

A total of 316 morphologically different phylloplane bacteria were isolated. Among the antagonists, the isolates designated as BMO‐075, BMO‐111 and BMO‐147 exhibited maximum inhibitory activity against both the pathogens under in vitro conditions and hence were selected for further evaluation under microplot field trial. Foliar application of 36‐h‐old culture of BMO‐111 (1 × 10⁸ colony‐forming units ml^?1) significantly reduced the blister blight disease incidence than the other isolates. The culture of BMO‐111 as well as its culture filtrate effectively inhibited the mycelial growth of various fungal plant pathogens. The isolate BMO‐111 was identified as Ochrobactrum anthropi based on the morphological and 16S rDNA sequence analyses.

Conclusions

It could be concluded that the biocontrol agent O. anthropi BMO‐111 was effective against blister blight disease of tea.

Significance and Impact of the Study

Further study is required to demonstrate the mechanism of its action and formulation for the biocontrol potential against blister blight disease of tea.     

One‐to‐one registration of en‐face optical coherence tomography attenuation coefficients with histology of a prostatectomy specimen

Optical coherence tomography (OCT), enables high‐resolution 3D imaging of the morphology of light scattering tissues. From the OCT signal, parameters can be extracted and related to tissue structures. One of the quantitative parameters is the attenuation coefficient; the rate at which the intensity of detected light decays in depth. To couple the quantitative parameters with the histology one‐to‐one registration is needed. The primary aim of this study is to validate a registration method of quantitative OCT parameters to histological tissue outcome through one‐to‐one registration of OCT with histology. We matched OCT images of unstained fixated prostate tissue slices with corresponding histology slides, wherein different histologic types were demarcated. Attenuation coefficients were determined by a supervised automated exponential fit (corrected for point spread function and sensitivity roll‐off related signal losses) over a depth of 0.32 mm starting from 0.10 mm below the automatically detected tissue edge. Finally, the attenuation coefficients corresponding to the different tissue types of the prostate were compared. From the attenuation coefficients, we produced the squared relative residue and goodness‐of‐fit metric R². This article explains the method to perform supervised automated quantitative analysis of OCT data, and the one‐to‐one registration of OCT extracted quantitative data with histopathological outcomes.      

Metabolic Alterations in Two Cirsium Species Identified at Distinct Phenological Stages using UPLC‐QTOF/MS

Introduction

Cirsium chanroenicum and C. setidens are commonly used both in traditional folk medicine and as a food source. The quality of different species of Cirsium at different harvest times is a function of their metabolite composition, which is determined by the phenological stage.

Objective

We sought to determine the differences in the metabolite composition of two species of Cirsium during different phenological stages using ultra‐performance liquid chromatography (UPLC) quadrupole time‐of‐flight (QTOF) mass spectrometry (MS).

Methodology

Cirsium chanroenicum and C. setidens plants were collected at the floral budding and full flowering stages. Metabolic profiles of Cirsium extracts were determined using UPLC‐QTOF/MS to characterise the differences between phenological stages, and the major metabolites were quantified using UPLC‐QTOF/MS‐multiple reaction monitoring (MRM).

Results

At the full flowering stage, the levels of phenolic acids as well as components of the phenylpropanoid pathway were increased. Flavonoids predominated at the full flowering stage in both species. The levels of coumaric acid, kaempferol, and pectolinarigenin differed between the two species of Cirsium. Overall, these results suggest that components of the phenylpropanoid metabolic pathway are upregulated in the full flowering stage in Cirsium, although we did observe some variation between the species.

Conclusion

These results will help elucidate the metabolic pathways related to the different phases of the vegetative cycle, and may help determine the optimal season for the harvest of Cirsium with the highest levels of bioactive compounds. Copyright © 2017 John Wiley & Sons, Ltd.     

Real‐time PCR for Helicobacter pylori diagnosis. The best tools available

Background

Knowledge of antimicrobial susceptibility, especially to macrolides, has become crucial for the management of Helicobacter pylori infection. Our aim was to evaluate two new PCR kits able to detect H. pylori in gastric biopsies as well as the mutations associated with macrolide resistance.

Materials and Methods

Two hundred successive biopsies (received from gastroenterologists all over France) were used. The two new kits tested were Amplidiag H. pylori+Clari^R from Mobidiag Espoo, Finland, and RIDA^®GENE H. pylori from R‐Biopharm, Darmstadt, Germany. Culture and a validated in‐house real‐time PCR were also performed, and in the case of a positive culture, Etest for clarithromycin was carried out. Discrepancies were solved by looking at the pathologic data.

Results

Culture was positive in 68 cases (34%), and with our in‐house real‐time PCR in these 68 cases plus 5 others (N = 73, 36%). All were also detected by the two new kits. In addition, RIDA^®GENE H. pylori detected one more positive also detected by Amplidiag H. pylori+Clari^R, and Amplidiag detected two other positives. Of these three additional cases, pathology confirmed the positivity for two. Only one case diagnosed by Amplidiag could be considered as a false positive. With regard to clarithromycin resistance, 22 cases were detected. The corresponding mutations (A2142/43G) were all identified with the three PCRs.

Conclusions

These two new kits which have an excellent sensitivity and specificity are convenient to use, adaptable to different thermocyclers, provide quick results, and deserve to be used in H. pylori diagnosis for a better choice of treatment regimen.