The effect of pH on chemiluminescence of different probes exposed to superoxide and singlet oxygen generators

The compromised optima for high intensity chemiluminescence (CL), using superoxide generators, were all above pH 9.0 for the CL probes luminol and lucigenin. With luminol the optima were at pH 9.0 and 9.4 for the generators KO₂ and hypoxanthine/xanthine oxidase (HX/XO), respectively. Lucigenin, with the same generators, produced optima at pH 9.5 and 10.0, respectively. The probe methyl-Cypridina-luciferin analogue (MCLA) produced optima closer to neutral pH, which is preferred for physiological assessments. MCLA had optima at pH 6.0, 8.7 and 9.5 with KO₂ and with HX/XO optima at pH 4.8, 6.0, 7.0 and 8.7. When CL was assessed at physiological pH, MCLA observed superoxide radicals with a sensitivity of 100- and 330-fold more than luminol or luicigenin respectively. For singlet oxygen, the sensitivity of MCLA at this pH was 45- and 5465-fold more than for the said probes respectively. H₂O₂ did not elicit CL between pH 4 and 9.5 with any of the probes and did not influence the production of superoxide or singlet oxygen when co-assessed. Therefore CL could only be obtained when enzymes were used as converters. The optima for the enzyme-conversion system horseradish peroxidase (HRP)/H₂O₂, and luminol, were at pH 8.0 and 9.2. Lucigenin and HRP/H₂O₂ also had a biphasic CL profile with optima at pH 7.4 and 9.6. MCLA and HRP/H₂O₂ had five optima, with the major ones at pH 6.1 and beyond 10. The optima for the myeloperoxidase/H₂O system were at 8.6 and beyond 10.0 when luminol and 0.15 mol/L NaBr were used. © 1997 John Wiley & Sons, Ltd.     

Mechanism of alcohol‐enhanced lucigenin chemiluminescence in alkaline solution

The chemiluminescence (CL) of lucigenin (Luc²⁺) can be enhanced by different alcohols in alkaline solution. The effect of different fatty alcohols on the CL of lucigenin was related to the carbon chain length and the number of hydroxyl groups. Glycerol provides the greatest enhancement. UV/Vis absorption spectra and fluorescence spectra showed that N‐methylacridone (NMA) was produced in the CL reaction in the presence of different alcohols. The peak of the CL spectrum was located at 470 nm in all cases, indicating that the luminophore was always the excited‐state NMA. The quenching of lucigenin CL by superoxide dismutase (SOD) and the electron spin resonance (ESR) results with the spin trap of 5,5‐dimethyl‐1‐pyrroline N‐oxide (DMPO) demonstrated that superoxide anions (O₂^?–) were generated from dissolved oxygen in the CL reaction and that glycerol and dihydroxyacetone (DHA) can promote O₂^?? production by the reduction of dissolved oxygen in alkaline solution. It was assumed that the enhancement provided by different alcohols was related to the solvent effect and reducing capacity. Glycerol and DHA can also reduce Luc²⁺ into lucigenin cation radicals (Luc^?+), which react with O₂^?? to produce CL, and glycerol can slowly transform into DHA, which is oxidized quickly in alkaline solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Nitric oxide synthase inhibitors decrease human polymorphonuclear leukocyte luminol-dependent chemiluminescence

Nitric oxide synthase (NOS) inhibitors have been reported to modulate luminol-dependent chemiluminescence (CL) in rat macrophages, whereas the potent oxidant peroxynitrite (ONOO^-) was shown to react with luminol to yield CL in a cellfree system. We evaluated the role of the -arginine/NOS pathway in luminol CL by phorbol ester-activated human polymorpho-nuclear (PMN) leukocytes using the NOS inhibitors N^G-monomethyl- -arginine ( -NMMA) and N-iminoethyl- -omithine ( -NIO). Nitric oxide (·NO) release was determined by oxidation of oxymyoglobin. In addition, the effect of NOS inhibitors on superoxide anion O₂^-) production was measured. Luminol CL was notably diminished by -NMMA in a dose-dependent manner. Superoxide dismutase (SOD) also decreased luminol CL and -NMMA potentiated light emission decrease produced by SOD. Nitric oxide and O₂^·- production was significantly decreased by -NMMA; moreover, luminol-dependent CL but not O₂^·- production was attenuated by -NIO. These data suggest that products of catalytic activity of both ·NO synthase and NADPH oxidase are required to elicit maximal luminol CL in this system. These studies demonstrate that the NOS synthase pathway is involved in luminol CL by human PMN, and they suggest that ONOO would be an unrecognized mediator in this phenomenon.     

A demonstration that o2− is a crucial intermediate in the high quantum yield luminescence of luminol

The chemiluminescence of luminol, due to its reaction with alkaline H₂O₂, is inhibited by Superoxide dismutase or by hydroxyl radical scavengers. Hematin markedly enhances this H₂O₂-induced luminescence of luminol and lessens, but does not eliminate, the sensitivity towards these inhibitors. Reaction mechanisms are proposed to account for these results. Since luminol luminescence depends upon a reaction between the luminol radical and O₂⁻, and since the luminol radical can reduce dioxygen to O₂⁻, Superoxide dismutase-inhibitable luminol luminescence cannot be reliably used as a detector of O₂⁻ production.     

What do we measure with luminol-, lucigenin- and penicillin-amplified chemiluminescence? 1. Investigations with hydrogen peroxide and sodium hypochlorite

Evidence is provided that the amplifiers luminol and lucigenin react with different reactive oxygen species (ROS), depending on the ROS-generating system used. H₂O₂ is used to produce calibration curves for luminol- and lucigenin-amplified chemiluminescence. With this chemiluminescence generator we characterized the specificity and sensitivity of luminol- and lucigenin-amplified chemiluminescence and also studied penicillin G, a known enhancer of luminol-amplified chemiluminescence. The combination of luminol and lucigenin in reciprocally changing concentrations is effective in an additive manner, but the weak amplifier penicillin increases luminol-amplified chemiluminescence distinctly more than in an additive manner in different combinations. Lucigenin-amplified chemiluminescence is increased by penicillin at about 1% of the optimum concentration of penicillin; increasing concentrations of penicillin are less and less effective. On the other hand, low lucigenin concentrations enhance penicillin-amplified chemiluminescence at optimum penicillin concentrations more than in an additive manner. Fe²⁺ does not alter luminol-, lucigenin- or penicillin-amplified chemiluminescence. Co²⁺ increases luminol-amplified chemiluminescence by a factor of 100. Lucigenin- and penicillin-amplified chemiluminescence are minimally enhanced by Co²⁺. Cu²⁺ enhances luminol-amplified chemiluminescence with increasing concentrations by a factor of 1000. Lucigenin-amplified chemiluminescence increases also by the factor of 1000, but the concentration–reaction curve is not as steep. NaOCl enhances H₂O₂/Fe²⁺-driven luminol-amplified chemiluminescence in a concentration-dependent manner by a factor of 10⁴ (in the highest concentration of 10 mmol/L) and lucigenin amplified chemiluminescence only by a factor of about 25. Catalase (CAT) abolishes luminol-, lucigenin- and penicillin-amplified chemiluminescence completely, whereas superoxide dismutase (SOD) has no effect on luminol- or penicillin-amplified chemiluminescence, but enhances lucigenin-amplified chemiluminescence five-fold increasingly with increasing SOD activity. © 1998 John Wiley & Sons, Ltd.     

Mild hypothermia protects against postischemic hepatic endothelial injury and decreases the formation of reactive oxygen species

Abstract

The ability of mild hypothermia (MH; 34°C) to protect against postischemic endothelial injury and decrease reactive oxygen species' (ROS) formation was studied using lucigenin and luminol enhanced chemiluminescence (CL). Lucigenin CL is largely specific for superoxide, while luminol reacts with many ROS.

Isolated rat livers perfused under constant flow in a non-recirculating system were exposed to 2.5 h of ischemia after 0.5 h perfusion with Krebs-Henseleit buffer at either normothermia (38°C) or mild hypothermia (34°C) (n = 5, all groups). CL (cps), vascular resistance (Woods units), O₂ consumption, and potassium efflux were measured at the end of perfusion, and at 0 min reperfusion, and every 30 min during reperfusion.

For both the lucigenin and luminol groups, CL and vascular resistance increased significantly (repeat measures ANOVA, P <0.05) for normothermia (NT, 38°C) but not mild hypothermia. Potassium efflux did not change significantly for the mild hypothermia groups. In the luminol enhanced group, oxygen consumption was greater in the mildly hypothermic group at 1 h and 1.5 h of reperfusion.

Mild hypothermia decreased postischemic ROS production. Increased vascular resistance in the normothermia group may indicate an endothelial injury. Mild hypothermia appears to protect against this injury.     

Involvement of the oxidative burst in phytoalexin accumulation and the hypersensitive reaction

The role of the oxidative burst, transient production of activated oxygen species such as H₂O₂ and superoxide (O₂⁻) in elicitation of phytoalexins and the hypersensitive reaction (HR) was investigated in white clover (Trifolium repens L.) and tobacco (Nicotiana tabacum L.). H₂O₂ and O₂⁻ production was measured as chemiluminescence (CL) mediated by luminol, which was added to suspension-cultured white clover just before measurement in an out-of-coincidence mode scintillation counter. Maximum CL occurred between 10 and 20 min after addition of 0.4 × 10⁸ colony-forming units/mL of incompatible Pseudomonas corrugata or 158 μm HgCl₂. Autoclaved P. corrugata produced a slightly higher response. Elicitation of cells with 25 μm HgCl₂ did not produce CL. Preincubation of plant cells in superoxide dismutase, which converts O₂⁻ to H₂O₂, for 2 min before addition of bacteria did not significantly increase maximum CL levels (P ≥ 0.05). Preincubation of plant cells with catalase for 2 min before addition of bacteria prevented the increase in CL, confirming that H₂O₂ is the substrate for the luminol reaction. Addition of live bacteria or HgCl₂ (25 and 158 μm) to white clover increased levels of the phytoalexin medicarpin during a 24-h period, but addition of autoclaved bacteria did not elicit formation of medicarpin. Preincubation of plant cells with catalase, which quenched the bacteria-induced oxidative burst, did not decrease phytoalexin accumulation. Live bacteria infiltrated into Havana 44 tobacco leaf panels induced development of the HR, but autoclaved bacteria did not. Incubation of live bacteria with superoxide dismutase and catalase before infiltration into tobacco leaves did not interfere with development of the HR. Tobacco leaf panels infiltrated with up to 158 μm HgCl₂ did not develop an HR. These results suggest that an oxidative burst consisting of H₂O₂ and O₂⁻ does occur during these two plant defense responses, but it may not be a necessary element of the signaling system for HR and phytoalexin formation.     

Comparison of oxidative stress induced by ciprofloxacin and pyoverdin in bacteria and in leukocytes to evaluate toxicity

Oxidative stress induced by ciprofloxacin and pyoverdin, a leukotoxic pigment, was studied by comparing their effect in bacteria and leukocytes. Chemiluminescence (CL) assays with lucigenin or luminol were adapted to measure the stimuli of superoxide anion (O₂^?) and other reactive species of oxygen (ROS) in bacteria. Ciprofloxacin principally induced the production of O₂^? in the three species studied: Staphylococcus aureus, Enterococcus faecalis and Escherichia coli. Lucigenin CL assay showed high oxidative stress in S. aureus due to its low superoxide dismutase (SOD) activity, whereas E. coli exhibited important SOD activity, responsible for little production of O₂^? in absence or presence of ciprofloxacin. Reduction of nitroblue of tetrazolium (NBT) was applied. This assay indicated that there was higher oxidative stress in S. aureus and E. faecalis than in E. coli. The comparison of oxidative stress generated in bacteria and leukocytes was used to check the selective toxicity of ciprofloxacin in comparison with pyoverdin. Ciprofloxacin did not generate significant stimuli of O₂^? in neutrophils, while pyoverdin duplicated the production of O₂^?. CL and NBT were useful to study the leukotoxicity of ciprofloxacin. Oxidative stress caused by the antibiotic and the leukotoxic pigment was similar in bacteria. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of sulphite on the oxidative metabolism of human neutrophils: Studies with lucigenin- and luminol-dependent chemiluminescence

To assess the effect of sulphite on the oxidative metabolism of human neutrophils, chemiluminescence (CL) measurements were performed using lucigenin and luminol as chemiluminigenic probes. Lucigenin-dependent CL was used for measuring superoxide anion (O) production, and luminol-dependent CL was used for determination of myeloperoxidase (MPO)-connected processes. With sulphite concentrations of 0.01 to 1 mmol/L, resting neutrophils showed an up to sixfold increase of lucigenin-dependent CL, but only a 1.9-fold increase of luminol-dependent CL. Subsequent stimulation of sulphite-treated neutrophils with phorbol myristate acetate (PMA) (soluble stimulant) or zymosan (particulate stimulant) resulted in an additional significant increase of lucigenin-dependent CL compared to stimulated control cells, whereas luminol-dependent CL increased slightly by 0.01 mmol/L sulphite and decreased then continuously. Sulphite concentrations above 1 mmol/L decreased both lucigenin- and luminol-dependent CL of resting and PMA- or zymosan-stimulated neutrophils. Lucigenin-dependent CL of sulphite-treated and subsequently stimulated neutrophils was strongly inhibited by extracellularly added superoxide dismutase, whereas luminol-dependent CL was markedly reduced by the MPO inhibitor azide. The intracellular activity of MPO in neutrophils stimulated with PMA in the presence of sulphite (2 mmol/L) was reduced by 55%. Sulphite (0.1 mmol/L) also inhibited strongly the activity of MPO in a cell-free system. These results indicate that micromolar concentrations of sulphite exert a stimulating effect on the O production of neutrophils extracellularly, but have an inhibitory effect on MPO-catalysed reactions intracellularly.     

Improvement of mimetic peroxidase activity of gold nanoclusters on the luminol chemiluminescence reaction by surface modification with ethanediamine

Peroxidase is a commonly used catalyst in luminol–H₂O₂ chemiluminescence (CL) reactions. Natural peroxidase has a sophisticated separation process, short shelf life and unstable activity, therefore it is important to develop peroxidases that have both high catalytic activity and good stability as alternatives to the natural enzyme. Gold nanoclusters (Au NCs) are an alternative peroxidase with catalytic activity in the luminol–H₂O₂ CL reaction. In the present study, ethanediamine was modified on the surface of Au NCs forming cationic Au NCs. The zeta potential of the cationic Au NCs maintained its positive charge when the pH of the solution was between 4 and 9. The cationic Au NCs showed higher catalytic activity in the luminol–H₂O₂ CL reaction than did unmodified Au NCs. A mechanism study showed that the better performance of cationic Au NCs may be attributed to the generation of ¹O₂ on the surface of cationic Au NCs and a positive surface charge, for better affinity to luminol. Cationic Au NC, acting as a peroxidase mimic, has much better stability than horseradish peroxidase over a wide range of temperatures. We believe that cationic Au NCs may be useful as an artificial peroxidase for a wide range of potential applications in CL and bioanalysis.     

Pyrophosphate as substrate for alkaline phosphatase activity: A convenient flow‐injection chemiluminescence assay

A sensitive and convenient flow‐injection chemiluminescence (FI‐CL) turn‐on assay for alkaline phosphatase (ALP) activity without any label and synthesis is developed. Cu²⁺ can catalyze the luminol–H₂O₂ CL reaction. Pyrophosphate (PPi) can chelate Cu²⁺ and therefore the Cu²⁺‐mediated luminol‐H₂O₂ CL reaction is inhibited. The addition of ALP can catalyze the hydrolysis of PPi into phosphate ions, Cu²⁺ is released and the chemiluminescence recovers. A detection limit of 1 mU/mL ALP is obtained.     

Characterization of peroxidases in luminol chemiluminescence coupled with copper-catalysed oxidation of cysteamine

Hydrogen peroxide formed during the course of the copper(II)-catalysed oxidation of cysteamine with oxygen was continuously determined by a peroxidase (POD)-catalysed luminol chemiluminescence (CL) method. Horseradish peroxidase (HRP), lactoperoxidase (LPO) and Arthromyces ramosus peroxidase (ARP) were used as a CL catalyst. The respective PODs gave specific CL intensity-time profiles. HRP caused a CL delay, and ARP gave a time-response curve which followed the production rate of H₂O₂. LPO gave only a weak CL flash which decayed promptly. These differences of CL response curves could be explained in terms of the different reactivities of PODs for superoxide anion and the different formation rate of luminol radicals in the peroxidation of luminol catalysed by POD.     

Chemiluminescence from luminol solution after illumination of a 355 nm pulse laser

Chemiluminescence (CL) on the time scale of microseconds to milliseconds from luminol solution after illumination of a 355 nm pulse laser is reported. It was found that the CL is the emission from 3‐aminophthalate ion (AP*). In CL decay after the pulse laser illumination, a peak was observed from about 200 to 30 µs depending on the laser power and the luminol concentration. It seemed that there was a fast and slow decay process; their kinetics were greatly dependent on the laser power and the luminol concentration. Dissolved oxygen was involved in the CL and played the same role on the whole time scale of microseconds to milliseconds. Involvement of reactive oxygen species such as H₂O₂, ¹O₂, O₂^?? and OH in the CL was examined by adding their scavengers. Experimental results suggested that the possibility of involvement of H₂O₂ and ¹O₂ in the CL was low. The CL in time periods less than 50 µs might be related to ?OH. The ^?O₂^??‐induced CL increased with time after 50 µs and became dominant on the time scale of milliseconds. The CL was considered to be caused by both the photoionization and type I reaction mechanisms. Copyright © 2009 John Wiley & Sons, Ltd.     

Turn‐off–on chemiluminescence determination of cyanide

A flow injection chemiluminescence (FI–CL) method was developed for the determination of cyanide (CN⁻) based on the recovered CL signal by Cu²⁺ inhibiting a glutathione (GSH)‐capped CdTe quantum dot (QD) and hydrogen peroxide system. In an alkaline medium, strong CL signals were observed from the reaction of CdTe QDs and H₂O₂, and addition of Cu²⁺ could cause significant CL inhibition of the CdTe QDs–H₂O₂ system. In the presence of CN⁻, Cu²⁺ can be removed from the surface of CdTe QDs via the formation of particularly stable [Cu(CN)_n]^(n‐1)– species, and the CL signal of the CdTe QDs–H₂O₂ system was efficiently recovered. Thus, the CL signals of CdTe QDs–H₂O₂ system were turned off and turned on by the addition of Cu²⁺ and CN⁻, respectively. Further, the results showed that among the tested ions, only CN⁻ could recover the CL signal, which suggested that the CdTe QDs–H₂O₂–Cu²⁺ CL system had highly selectivity for CN⁻. Under optimum conditions, the CL intensity and the concentration of CN⁻ show a good linear relationship in the range 0.0–650.0 ng/mL (R² = 0.9996). The limit of detection for CN⁻ was 6.0 ng/mL (3σ). This method has been applied to detect CN⁻ in river water and industrial wastewater with satisfactory results. Copyright © 2014 John Wiley & Sons, Ltd.     

Chemiluminescence of off‐line and on‐line gold nanoparticle‐catalyzed luminol system in the presence of flavonoid

It was found that flavonoids could remarkably inhibit the chemiluminescence (CL) intensity of an off‐line gold nanoparticle (AuNP)‐catalyzed luminol–H₂O₂ CL system. By contrast, flavonoids enhanced the CL intensity of an on‐line AuNP‐catalyzed luminol–H₂O₂ CL system. In the off‐line system, the AuNPs were prepared beforehand, whereas in the on‐line system, AuNPs were produced by on‐line mixing of luminol prepared in a buffer solution of NaHCO₃ ? Na₂CO₃ and HAuCl₄ with no need for the preliminary preparation of AuNPs. The on‐line system had prominent advantages over the off‐line system, namely a lowering of the background noise and improvements in the stability of the CL system. The results show that differences in the signal suppression effect of flavonoids on the off‐line AuNP‐catalyzed CL system are influenced by the combined action of a free radical scavenging effect and occupy‐sites function; the latter was proved to be predominant using controlled experiments. Enhancement of the on‐line system was ascribed to the presence of flavonoids promoting the on‐line formation of AuNPs, which better catalyzed the luminol–H₂O₂ CL reaction, and the enhancement activity of the six flavonoids increased with the increase in reducibility. This work broadens the scope of practical applications of an AuNP‐catalyzed CL system.     

A chelate complex‐enhanced luminol system for selective determination of Co(II), Fe(II) and Cr(III)

A determination method for Co(II), Fe(II) and Cr(III) ions by luminol‐H₂O₂ system using chelating reagents is presented. A metal ion‐chelating ligand complex with a Co(II) ion and a chelating reagent like ethylenediaminetetraacetic acid (EDTA) produced highly enhanced chemiluminescence (CL) intensity as well as longer lifetime in the luminol‐H₂O₂ system compared to metals that exist as free ions. Whereas free Cu(II) and Pb(II) ions had a strong catalytic effect on the luminol‐H₂O₂ system, significantly, the complexes of Cu(II) and Pb(II) with chelating reagents lost their catalytic activity due to the chelating reagents acting as masking agents. Based on the observed phenomenon, it was possible to determine Co(II), Fe(II) and Cr(III) ions with enhanced sensitivity and selectivity using the chelating reagents of the luminol‐H₂O₂ system. The effects of ligand, H₂O₂ concentration, pH, buffer solution and concentrations of chelating reagents on CL intensity of the luminol‐H₂O₂ system were investigated and optimized for the determination of Co(II), Fe(II) and Cr(III) ions. Under optimized conditions, the calibration curve of metal ions was linear over the range of 2.0 × 10^‐8 to 2.0 × 10^‐5 M for Co(II), 1.0 × 10^‐7 to 2.0 × 10^‐5 M for Fe (II) and 2.0 × 10^‐7 to 1.0 × 10^‐4 M for Cr(III). Limits of detection (3σ/s) were 1.2 × 10^‐8, 4.0 × 10^‐8 and 1.2 × 10^‐7 M for Co(II), Fe(II) and Cr(III), respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

FeS2 nanosheets–luminol–O2 chemiluminescence method for determination of venlafaxine hydrochloride,imipramine hydrochloride,and cefazolin sodium

This study introduces a novel chemiluminescence (CL) approach utilizing FeS₂ nanosheets (NSs) catalyzed luminol–O₂ CL reaction for the measurement of three pharmaceuticals, namely venlafaxine hydrochloride (VFX), imipramine hydrochloride (IPM), and cefazolin sodium (CEF). The CL method involved the phenomenon of quenching induced by the pharmaceuticals in the CL reaction. To achieve the most quenching efficacy of the pharmaceuticals in the CL reaction, the concentrations of reactants comprising luminol, NaOH, and FeS₂ NSs were optimized accordingly. The calibration curves demonstrated exceptional linearity within the concentration range spanning from 4.00 × 10⁻⁷ to 1.00 × 10⁻³ mol L⁻¹, 1.00 × 10⁻⁷ to 1.00 × 10⁻⁴ mol L⁻¹, and 4.00 × 10⁻⁶ to 2.00 × 10⁻⁴ mol L⁻¹ with detection limits (3σ) of 3.54 × 10⁻⁷, 1.08 × 10⁻⁸, and 2.63 × 10⁻⁶ mol L⁻¹ for VFX, IPM, and CEF, respectively. This study synthesized FeS₂ NSs using a facile hydrothermal approach, and then the synthesized FeS₂ NSs were subjected to a comprehensive characterization using a range of spectroscopic methods. The proposed CL method was effective in measuring the aforementioned pharmaceuticals in pharmaceutical formulations as well as different water samples. The mechanism of the CL system has been elucidated.     

Chemiluminescence response of the human polymorphonuclear neutrophil to lipopolysaccharides

Polymorphonuclear neutrophils (PMN) respond to a variety of stimuli with a sequence of reactions that lead to the production of “active oxygen” species, including H₂O₂, free radicals, such as superoxide (O₂ ⁻·) and hydroxyl (HO·), and singlet molecular oxygen (¹O₂). Some of these can oxidize (5-amino-2,3-dihydrophthalazine 1,4-dione) (luminol) to the ground state aminophthalate ion; this reaction sequence is accompanied by the generation of a photon and forms the basis for the chemiluminescence (CL) response. In this work we used a dedicated photon counting instrument to record CL from PMN incubated with bacterial lipopolysaccharide (LPS). We have studied the CL response to the LPS fromEscherichia coli strains 026:B6 and 055:B5, as well asSalmonella minnesota RE 595 and have determined that CL requires heat-labile serum factors, these most likely being intact components of the complement system.     

Influence of ceruloplasmin and lactoferrin on the chlorination activity of leukocyte myeloperoxidase assayed by chemiluminescence

We demonstrate that addition of H₂O₂ to a mixture of myeloperoxidase (MPO), chloride and luminol immediately evokes a short intense flash of chemiluminescence (CL). This flash is diminished in the absence of MPO or chloride, and in the complete system it is suppressed by an MPO inhibitor azide, hypochlorite scavengers taurine or methionine, or an MPO peroxidase-cycle substrate guaiacol. Hence, this CL is mostly due to the MPO halogenation function; a measure of this activity is provided by the integral CL. With three independent methods (CL, taurine chlorination, and peroxidase assay) it is shown that MPO activity is suppressed by ceruloplasmin (Cp). Lactoferrin has no effect either on MPO or on the MPO-Cp complex. It is also shown that peroxidase inhibition by Cp is the stronger the larger is the MPO substrate, which suggests steric hindrances to substrate binding in the MPO-Cp complex. Importantly, the conventional chlorination and peroxidase assays detect MPO inhibition by Cp only at a large excess of the latter, whereas the CL assay reveals it at stoichiometric ratios characteristic of the naturally occurring protein complexes.     

Study on the reaction mechanism and the static injection chemiluminescence method for detection of acetaminophen

Acetaminophen, also called paracetamol, is found in Tylenol, Excedrin and other products as over–the‐counter medicines. In this study, acetaminophen as a luminol signal enhancer was used in the chemiluminescence (CL) substrate solution of horseradish peroxidase (HRP) for the first time. The use of acetaminophen in the luminol–HRP–H₂O₂ system affected not only the intensity of the obtained signal, but also its kinetics. It was shown that acetaminophen was to be a potent enhancer of the luminol–HRP–H₂O₂ system. A putative enhancement mechanism for the luminol–H₂O₂–HRP–acetaminophen system is presented. The resonance of the nucleophilic amide group and the benzene ring of acetaminophen structure have a great effect on O‐H bond dissociation energy of the phenol group and therefore on phenoxyl radical stabilization. These radicals act as mediators between HRP and luminol in an electron transfer reaction that generates luminol radicals and subsequently light emission, in which the intensity of CL is enhanced in the presence of acetaminophen. In addition, a simple method was developed to detect acetaminophen by static injection CL based on the enhanced CL system of luminol–H₂O₂–HRP by acetaminophen. Experimental conditions, such as pH and concentrations of substrates, have been examined and optimized. The proposed method exhibited good performance, the linear range was from 0.30 to 7.5 mM, the relative standard deviation was 1.86% (n = 10), limit of detection was 0.16 mM and recovery was 99 ± 4%. Copyright © 2013 John Wiley & Sons, Ltd.