共查询到20条相似文献,搜索用时 37 毫秒
1.
Zacharias M 《Proteins》2004,54(4):759-767
Most current docking methods to identify possible ligands and putative binding sites on a receptor molecule assume a rigid receptor structure to allow virtual screening of large ligand databases. However, binding of a ligand can lead to changes in the receptor protein conformation that are sterically necessary to accommodate a bound ligand. An approach is presented that allows relaxation of the protein conformation in precalculated soft flexible degrees of freedom during ligand-receptor docking. For the immunosuppressant FK506-binding protein FKBP, the soft flexible modes are extracted as principal components of motion from a molecular dynamics simulation. A simple penalty function for deformations in the soft flexible mode is used to limit receptor protein deformations during docking that avoids a costly recalculation of the receptor energy by summing over all receptor atom pairs at each step. Rigid docking of the FK506 ligand binding to an unbound FKBP conformation failed to identify a geometry close to experiment as favorable binding site. In contrast, inclusion of the flexible soft modes during systematic docking runs selected a binding geometry close to experiment as lowest energy conformation. This has been achieved at a modest increase of computational cost compared to rigid docking. The approach could provide a computationally efficient way to approximately account for receptor flexibility during docking of large numbers of putative ligands and putative docking geometries. 相似文献
2.
Kekenes-Huskey PM Muegge I von Rauch M Gust R Knapp EW 《Bioorganic & medicinal chemistry》2004,12(24):794-6537
Numerous selective estrogen receptor modulators (SERMs) have been synthesized and assayed in recent years. The focus of this study is to apply coarse-grain molecular docking procedures coupled with fine-grain all-atom force field optimization strategies to shed light on the binding mechanisms of currently available estrogen receptor-active compounds. Although the mechanics of ligand binding in estrogen receptors is generally well understood, there is room for surprises. In this paper computational evidence corroborating the experimentally observed type I agonistic binding mode for estradiol (E2) and diethylstilbesterol (DES) and the type II antagonistic binding mode for 4-hydroxytamoxifen and raloxifen is presented. Included in this type I agonistic mode are the DES derivatives, transstilbene and 1,2-diaryldiaminoethane. In addition, a novel ‘type II agonistic’ binding mode for 2,3-diarylimidazolines, 4,5-diarylimidazoles, 2,3-diarylpiperazines is introduced. This mode is stabilized by suggesting alternative hydrogen bond anchor points in the ligand binding domain as potential leads for future drug design. 相似文献
3.
A similarity-driven approach to flexible ligand docking is presented. Given a reference ligand or a pharmacophore positioned in the protein active site, the method allows inclusion of a similarity term during docking. Two different algorithms have been implemented, namely, a similarity-penalized docking (SP-DOCK) and a similarity-guided docking (SG-DOCK). The basic idea is to maximally exploit the structural information about the ligand binding mode present in cases where ligand-bound protein structures are available, information that is usually ignored in standard docking procedures. SP-DOCK and SG-DOCK have been derived as modified versions of the program DOCK 4.0, where the similarity program MIMIC acts as a module for the calculation of similarity indices that correct docking energy scores at certain steps of the calculation. SP-DOCK applies similarity corrections to the set of ligand orientations at the end of the ligand incremental construction process, penalizing the docking energy and, thus, having only an effect on the relative ordering of the final solutions. SG-DOCK applies similarity corrections throughout the entire ligand incremental construction process, thus affecting not only the relative ordering of solutions but also actively guiding the ligand docking. The performance of SP-DOCK and SG-DOCK for binding mode assessment and molecular database screening is discussed. When applied to a set of 32 thrombin ligands for which crystal structures are available, SG-DOCK improves the average RMSD by ca. 1 A when compared with DOCK. When those 32 thrombin ligands are included into a set of 1,000 diverse molecules from the ACD, DIV, and WDI databases, SP-DOCK significantly improves the retrieval of thrombin ligands within the first 10% of each of the three databases with respect to DOCK, with minimal additional computational cost. In all cases, comparison of SP-DOCK and SG-DOCK results with those obtained by DOCK and MIMIC is performed. 相似文献
4.
The mechanics of peptide–protein docking has long been an area of intense interest to the computational community. Here we discuss an improved docking protocol named XPairIt which uses a multitier approach, combining the PyRosetta docking software with the NAMD molecular dynamics package through a biomolecular simulation programming interface written in Python. This protocol is designed for systems where no a priori information of ligand structure (beyond sequence) or binding location is known. It provides for efficient incorporation of both ligand and target flexibility, is HPC-ready and is easily extensible for use of custom code. We apply this protocol to a set of 11 test cases drawn from benchmarking databases and from previously published studies for direct comparison with existing protocols. Strengths, weaknesses and areas of improvement are discussed. 相似文献
5.
Docking methodology aims to predict the experimental binding modes and affinities of small molecules within the binding site of particular receptor targets and is currently used as a standard computational tool in drug design for lead compound optimisation and in virtual screening studies to find novel biologically active molecules. The basic tools of a docking methodology include a search algorithm and an energy scoring function for generating and evaluating ligand poses. In this review, we present the search algorithms and scoring functions most commonly used in current molecular docking methods that focus on protein–ligand applications. We summarise the main topics and recent computational and methodological advances in protein–ligand docking. Protein flexibility, multiple ligand binding modes and the free-energy landscape profile for binding affinity prediction are important and interconnected challenges to be overcome by further methodological developments in the docking field. 相似文献
6.
Virtual high-throughput screening of molecular databases and in particular high-throughput protein–ligand docking are both common methodologies that identify and enrich hits in the early stages of the drug design process. Current protein–ligand docking algorithms often implement a program-specific model for protein–ligand interaction geometries. However, in order to create a platform for arbitrary queries in molecular databases, a new program is desirable that allows more manual control of the modeling of molecular interactions.For that reason, ProPose, an advanced incremental construction docking engine, is presented here that implements a fast and fully configurable molecular interaction and scoring model. This program uses user-defined, discrete, pharmacophore-like representations of molecular interactions that are transformed on-the-fly into a continuous potential energy surface, allowing for the incorporation of target specific interaction mechanisms into docking protocols in a straightforward manner. A torsion angle library, based on semi-empirical quantum chemistry calculations, is used to provide minimum energy torsion angles for the incremental construction algorithm. Docking results of a diverse set of protein–ligand complexes from the Protein Data Bank demonstrate the feasibility of this new approach.As a result, the seamless integration of pharmacophore-like interaction types into the docking and scoring scheme implemented in ProPose opens new opportunities for efficient, receptor-specific screening protocols.
Figure ProPose — a fully configurable protein-ligand docking program — transforms pharmacophores into a smooth potential energy surface.This revised version was published online in October 2004 with corrections to the Graphical Abstract. 相似文献
7.
Molecular insights into the binding selectivity of a synthetic ligand DAAG to Fc fragment of IgG
下载免费PDF全文
![点击此处可从《Journal of molecular recognition : JMR》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Rong‐Zhu Wang Dong‐Qiang Lin Hong‐Fei Tong Shan‐Jing Yao 《Journal of molecular recognition : JMR》2014,27(5):250-259
Affinity chromatography with synthetic ligands has been focused as the potential alternative to protein A‐based chromatography for antibody capture because of its comparable selectivity and efficiency. Better understanding on the molecular interactions between synthetic ligand and antibody is crucial for improving and designing novel ligands. In this work, the molecular interaction mechanism between Fc fragment of IgG and a synthetic ligand (DAAG) was studied with molecular docking and dynamics simulation. The docking results on the consensus binding site (CBS) indicated that DAAG could bind to the CBS with the favorable orientation like a tripod for the top‐ranked binding complexes. The ligand‐Fc fragment complexes were then tested by molecular dynamics simulation at neutral condition (pH 7.0) for 10 ns. The results indicated that the binding of DAAG on the CBS of Fc fragment was achieved by the multimodal interactions, combining the hydrophobic interaction, electrostatic interaction, hydrogen bond, and so on. It was also found that multiple secondary interactions endowed DAAG with an excellent selectivity to Fc fragment. In addition, molecular dynamics simulation conducted at acidic condition (pH 3.0) showed that the departure of DAAG ligand from the surface of Fc fragment was the result of reduced interaction energies. The binding modes between DAAG and CBS not only shed light on the molecular mechanisms of DAAG for antibody purification but also provide useful information for the improvement of ligand design. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
8.
Vijayakumar Subramaniyan Reetha Sekar Arulmozhi Praveenkumar Rajalakshmi Selvam 《Quantitative Biology.》2019,7(4):302
Background: Hepatitis B virus (HBV) has affected over 300 million people worldwide which causes to induce mostly liver disease and liver cancer. It is a member of the family Hepadnaviridae which is a small DNA virus with unusual characters like retroviruses. Generally, hepatoprotective drugs provoke some side effects in human beings. For the reason, this study aims to identify alternative drug molecules from the natural source of medicinal plants with smaller quantity of side effects than those conventional drugs in treating HBV. Methods: We developed computational methods for calculating drug and target binding resemblance using the Maestro v10.2 of Schrodinger suite. The target and ligand molecules were obtained from recognized databases. Ligand molecules of 40 phytoconstituents were retrieved from variety of plants after we executed crucial analyses such as molecular docking and absorption, distribution, metabolism, and excretion (ADME) analysis.Results: In the docking analysis, the natural analogues repandusinic acid showed better docking scores of –14.768 with good binding contacts. The remaining bioactive molecules corilagin, furosin, nirurin, iso-quercetin and gallocatechin also showed better docking scores.Conclusion: This computational analysis reveals that repandusinic acid is a suitable drug candidate for HBV. Therefore, we recommend that this analogue is suitable in further exploration using in vitro studies. 相似文献
9.
D. M. Lorber B. K. Shoichet 《Protein science : a publication of the Protein Society》1998,7(4):938-950
Molecular docking algorithms suggest possible structures for molecular complexes. They are used to model biological function and to discover potential ligands. A present challenge for docking algorithms is the treatment of molecular flexibility. Here, the rigid body program, DOCK, is modified to allow it to rapidly fit multiple conformations of ligands. Conformations of a given molecule are pre-calculated in the same frame of reference, so that each conformer shares a common rigid fragment with all other conformations. The ligand conformers are then docked together, as an ensemble, into a receptor binding site. This takes advantage of the redundancy present in differing conformers of the same molecule. The algorithm was tested using three organic ligand protein systems and two protein-protein systems. Both the bound and unbound conformations of the receptors were used. The ligand ensemble method found conformations that resembled those determined in X-ray crystal structures (RMS values typically less than 1.5 A). To test the method's usefulness for inhibitor discovery, multi-compound and multi-conformer databases were screened for compounds known to bind to dihydrofolate reductase and compounds known to bind to thymidylate synthase. In both cases, known inhibitors and substrates were identified in conformations resembling those observed experimentally. The ligand ensemble method was 100-fold faster than docking a single conformation at a time and was able to screen a database of over 34 million conformations from 117,000 molecules in one to four CPU days on a workstation. 相似文献
10.
Oliveira FG Sant'Anna CM Caffarena ER Dardenne LE Barreiro EJ 《Bioorganic & medicinal chemistry》2006,14(17):6001-6011
In the present work, several computational methodologies were combined to develop a model for the prediction of PDE4B inhibitors' activity. The adequacy of applying the ligand docking approach, keeping the enzyme rigid, to the study of a series of PDE4 inhibitors was confirmed by a previous molecular dynamics analysis of the complete enzyme. An exhaustive docking procedure was performed to identify the most probable binding modes of the ligands to the enzyme, including the active site metal ions and the surrounding structural water molecules. The enzyme-inhibitor interaction enthalpies, refined by using the semiempirical molecular orbital approach, were combined with calculated solvation free energies and entropy considerations in an empirical free energy model that enabled the calculation of binding free energies that correlated very well with experimentally derived binding free energies. Our results indicate that both the inclusion of the structural water molecules close to the ions in the binding site and the use of a free energy model with a quadratic dependency on the ligand free energy of solvation are important aspects to be considered for molecular docking investigations involving the PDE4 enzyme family. 相似文献
11.
Virtual compound screening using molecular docking is widely used in the discovery of new lead compounds for drug design. However, the docking scores are not sufficiently precise to represent the protein-ligand binding affinity. Here, we developed an efficient computational method for calculating protein-ligand binding affinity, which is based on molecular mechanics generalized Born/surface area (MM-GBSA) calculations and Jarzynski identity. Jarzynski identity is an exact relation between free energy differences and the work done through non-equilibrium process, and MM-GBSA is a semimacroscopic approach to calculate the potential energy. To calculate the work distribution when a ligand is pulled out of its binding site, multiple protein-ligand conformations are randomly generated as an alternative to performing an explicit single-molecule pulling simulation. We assessed the new method, multiple random conformation/MM-GBSA (MRC-MMGBSA), by evaluating ligand-binding affinities (scores) for four target proteins, and comparing these scores with experimental data. The calculated scores were qualitatively in good agreement with the experimental binding affinities, and the optimal docking structure could be determined by ranking the scores of the multiple docking poses obtained by the molecular docking process. Furthermore, the scores showed a strong linear response to experimental binding free energies, so that the free energy difference of the ligand binding (ΔΔG) could be calculated by linear scaling of the scores. The error of calculated ΔΔG was within ≈±1.5 kcal•mol−1 of the experimental values. Particularly, in the case of flexible target proteins, the MRC-MMGBSA scores were more effective in ranking ligands than those generated by the MM-GBSA method using a single protein-ligand conformation. The results suggest that, owing to its lower computational costs and greater accuracy, the MRC-MMGBSA offers efficient means to rank the ligands, in the post-docking process, according to their binding affinities, and to compare these directly with the experimental values. 相似文献
12.
Efficient docking of peptides to proteins without prior knowledge of the binding site 总被引:1,自引:0,他引:1
下载免费PDF全文
![点击此处可从《Protein science : a publication of the Protein Society》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Hetényi C van der Spoel D 《Protein science : a publication of the Protein Society》2002,11(7):1729-1737
Reliability in docking of ligand molecules to proteins or other targets is an important challenge for molecular modeling. Applications of the docking technique include not only prediction of the binding mode of novel drugs, but also other problems like the study of protein-protein interactions. Here we present a study on the reliability of the results obtained with the popular AutoDock program. We have performed systematical studies to test the ability of AutoDock to reproduce eight different protein/ligand complexes for which the structure was known, without prior knowledge of the binding site. More specifically, we look at factors influencing the accuracy of the final structure, such as the number of torsional degrees of freedom in the ligand. We conclude that the Autodock program package is able to select the correct complexes based on the energy without prior knowledge of the binding site. We named this application blind docking, as the docking algorithm is not able to "see" the binding site but can still find it. The success of blind docking represents an important finding in the era of structural genomics. 相似文献
13.
Human leukocyte antigen-related (PTP-LAR) is a receptor-like transmembrane phosphatase and a potential target for diabetes,
obesity and cancer. In the present study, a sequence of in silico strategies (pharmacophore mapping, a 3D database searching,
SADMET screening, and docking and toxicity studies) was performed to identify eight novel nontoxic PTP-LAR inhibitors. Twenty
different pharmacophore hypotheses were generated using two methods; the best (hypothesis 2) consisted of three hydrogen-bond
acceptor (A), one ring aromatic (R), and one hydrophobic aliphatic (Z) features. This hypothesis was used to screen molecules
from several databases, such as Specs, IBS, MiniMaybridge, NCI, and an in-house PTP inhibitor database. In order to overcome
the general bioavailability problem associated with phosphatases, the hits obtained were filtered by Lipinski’s rule of five
and SADMET properties and validated by molecular docking studies using the available crystal structure 1LAR. These docking
studies suggested the ligand binding pattern and interactions required for LAR inhibition. The docking analysis also revealed
that sulfonylurea derivatives with an isoquinoline or naphthalene scaffold represent potential LAR drugs. The screening protocol
was further validated using ligand pharmacophore mapping studies, which showed that the abovementioned interactions are indeed
crucial and that the screened molecules can be presumed to possess potent inhibitory activities. 相似文献
14.
Binding‐site water molecules play a crucial role in protein‐ligand recognition, either being displaced upon ligand binding or forming water bridges to stabilize the complex. However, rigorously treating explicit binding‐site waters is challenging in molecular docking, which requires to fully sample ensembles of waters and to consider the free energy cost of replacing waters. Here, we describe a method to incorporate structural and energetic properties of binding‐site waters into molecular docking. We first developed a solvent property analysis (SPA) program to compute the replacement free energies of binding‐site water molecules by post‐processing molecular dynamics trajectories obtained from ligand‐free protein structure simulation in explicit water. Next, we implemented a distance‐dependent scoring term into DOCK scoring function to take account of the water replacement free energy cost upon ligand binding. We assessed this approach in protein targets containing important binding‐site waters, and we demonstrated that our approach is reliable in reproducing the crystal binding geometries of protein‐ligand‐water complexes, as well as moderately improving the ligand docking enrichment performance. In addition, SPA program (free available to academic users upon request) may be applied in identifying hot‐spot binding‐site residues and structure‐based lead optimization. Proteins 2014; 82:1765–1776. © 2014 Wiley Periodicals, Inc. 相似文献
15.
Automatic identification and representation of protein binding sites for molecular docking. 总被引:1,自引:0,他引:1
下载免费PDF全文
![点击此处可从《Protein science : a publication of the Protein Society》网站下载免费的PDF全文](/ch/ext_images/free.gif)
J. Ruppert W. Welch A. N. Jain 《Protein science : a publication of the Protein Society》1997,6(3):524-533
Molecular docking is a popular way to screen for novel drug compounds. The method involves aligning small molecules to a protein structure and estimating their binding affinity. To do this rapidly for tens of thousands of molecules requires an effective representation of the binding region of the target protein. This paper presents an algorithm for representing a protein's binding site in a way that is specifically suited to molecular docking applications. Initially the protein's surface is coated with a collection of molecular fragments that could potentially interact with the protein. Each fragment, or probe, serves as a potential alignment point for atoms in a ligand, and is scored to represent that probe's affinity for the protein. Probes are then clustered by accumulating their affinities, where high affinity clusters are identified as being the "stickiest" portions of the protein surface. The stickiest cluster is used as a computational binding "pocket" for docking. This method of site identification was tested on a number of ligand-protein complexes; in each case the pocket constructed by the algorithm coincided with the known ligand binding site. Successful docking experiments demonstrated the effectiveness of the probe representation. 相似文献
16.
Dealing with receptor flexibility in docking methodology is still a problem. The main reason behind this difficulty is the large number of degrees of freedom that have to be considered in this kind of calculations. In this paper, we present an automated procedure, called MADAMM, that allows flexibilization of both the receptor and the ligand during a multistaged docking with an automated molecular modeling protocol. We show that the orientation of particular residues at the interface between the protein and the ligand have a crucial influence on the way they interact during the docking process, and the standard docking methodologies failed to predict their correct mode of binding. We present some examples that demonstrate the capabilities of this approach when compared with traditional docking methodologies. 相似文献
17.
Solvation plays an important role in ligand‐protein association and has a strong impact on comparisons of binding energies for dissimilar molecules. When databases of such molecules are screened for complementarity to receptors of known structure, as often occurs in structure‐based inhibitor discovery, failure to consider ligand solvation often leads to putative ligands that are too highly charged or too large. To correct for the different charge states and sizes of the ligands, we calculated electrostatic and non‐polar solvation free energies for molecules in a widely used molecular database, the Available Chemicals Directory (ACD). A modified Born equation treatment was used to calculate the electrostatic component of ligand solvation. The non‐polar component of ligand solvation was calculated based on the surface area of the ligand and parameters derived from the hydration energies of apolar ligands. These solvation energies were subtracted from the ligand‐receptor interaction energies. We tested the usefulness of these corrections by screening the ACD for molecules that complemented three proteins of known structure, using a molecular docking program. Correcting for ligand solvation improved the rankings of known ligands and discriminated against molecules with inappropriate charge states and sizes. Proteins 1999;34:4–16. © 1999 Wiley‐Liss, Inc. 相似文献
18.
Meireles L Gur M Bakan A Bahar I 《Protein science : a publication of the Protein Society》2011,20(10):1645-1658
Modeling protein flexibility constitutes a major challenge in accurate prediction of protein-ligand and protein-protein interactions in docking simulations. The lack of a reliable method for predicting the conformational changes relevant to substrate binding prevents the productive application of computational docking to proteins that undergo large structural rearrangements. Here, we examine how coarse-grained normal mode analysis has been advantageously applied to modeling protein flexibility associated with ligand binding. First, we highlight recent studies that have shown that there is a close agreement between the large-scale collective motions of proteins predicted by elastic network models and the structural changes experimentally observed upon ligand binding. Then, we discuss studies that have exploited the predicted soft modes in docking simulations. Two general strategies are noted: pregeneration of conformational ensembles that are then utilized as input for standard fixed-backbone docking and protein structure deformation along normal modes concurrent to docking. These studies show that the structural changes apparently "induced" upon ligand binding occur selectively along the soft modes accessible to the protein prior to ligand binding. They further suggest that proteins offer suitable means of accommodating/facilitating the recognition and binding of their ligand, presumably acquired by evolutionary selection of the suitable three-dimensional structure. 相似文献
19.
Discovering small molecules that interact with protein targets will be a key part of future drug discovery efforts. Molecular docking of drug-like molecules is likely to be valuable in this field; however, the great number of such molecules makes the potential size of this task enormous. In this paper, a method to screen small molecular databases using cloud computing is proposed. This method is called the hierarchical method for molecular docking and can be completed in a relatively short period of time. In this method, the optimization of molecular docking is divided into two subproblems based on the different effects on the protein–ligand interaction energy. An adaptive genetic algorithm is developed to solve the optimization problem and a new docking program (FlexGAsDock) based on the hierarchical docking method has been developed. The implementation of docking on a cloud computing platform is then discussed. The docking results show that this method can be conveniently used for the efficient molecular design of drugs. 相似文献
20.
In this work, we present an algorithm developed to handle biomolecular structural recognition problems, as part of an interdisciplinary research endeavor of the Computer Vision and Molecular Biology fields. A key problem in rational drug design and in biomolecular structural recognition is the generation of binding modes between two molecules, also known as molecular docking. Geometrical fitness is a necessary condition for molecular interaction. Hence, docking a ligand (e.g., a drug molecule or a protein molecule), to a protein receptor (e.g., enzyme), involves recognition of molecular surfaces. Conformational transitions by "hinge-bending" involves rotational movements of relatively rigid parts with respect to each other. The generation of docked binding modes between two associating molecules depends on their three dimensional structures (3-D) and their conformational flexibility. In comparison to the particular case of rigid-body docking, the computational difficulty grows considerably when taking into account the additional degrees of freedom intrinsic to the flexible molecular docking problem. Previous docking techniques have enabled hinge movements only within small ligands. Partial flexibility in the receptor molecule is enabled by a few techniques. Hinge-bending motions of protein receptors domains are not addressed by these methods, although these types of transitions are significant, e.g., in enzymes activity. Our approach allows hinge induced motions to exist in either the receptor or the ligand molecules of diverse sizes. We allow domains/subdomains/group of atoms movements in either of the associating molecules. We achieve this by adapting a technique developed in Computer Vision and Robotics for the efficient recognition of partially occluded articulated objects. These types of objects consist of rigid parts which are connected by rotary joints (hinges). Our method is based on an extension and generalization of the Hough transform and the Geometric Hashing paradigms for rigid object recognition. We show experimental results obtained by the successful application of the algorithm to cases of bound and unbound molecular complexes, yielding fast matching times. While the "correct" molecular conformations of the known complexes are obtained with small RMS distances, additional, predictive good-fitting binding modes are generated as well. We conclude by discussing the algorithm's implications and extensions, as well as its application to investigations of protein structures in Molecular Biology and recognition problems in Computer Vision. 相似文献