Organic matter transformations and kinetics during sewage sludge composting in a two-stage system

The use of different proportions of rape straw and grass as amendments in the composting of dewatered sewage sludge from a municipal wastewater treatment plant was tested in a two-stage system (first stage, an aerated bioreactor and second stage, a periodically turned windrow). The composition of feedstock affected the temperature and organic matter degradation in the bioreactor and the formation of humic substances, especially humic acids (HA), during compost maturation in the windrow. The total HA content (the sum of labile and stable HA) increased according to first-order kinetics, whereas labile HA content was constant and did not exceed 12% of total HA. Δlog K of 1.0–1.1 indicated that HA was of R-type, indicating a low degree of humification. Temperature during composting was the main factor affecting polymerization of fulvic acids to HA and confirmed the value of the degree of polymerization, which increased only when thermophilic conditions were obtained.     

Total concentrations and chemical speciation of heavy metals in liquefaction residues of sewage sludge

The risk (including bioavailability and eco-toxicity) of heavy metals (Pb, Zn, Cu, Cd, Cr and Ni) in liquefaction residues (LR) of sewage sludge (SS) was estimated, according to both the speciation of heavy metals and the local environmental characteristics. The amount of organic matters in LR was lower than that in SS, resulting in a smaller calorific value, while the total content of heavy metals in LR nearly doubled. High residual rates of heavy metals (about 80%) indicated that the heavy metals in SS were concentrated into LR after liquefaction. The comparisons of sequential extraction results between SS and LR showed that after liquefaction, the mobile and easily available heavy metal fractions (acid soluble/exchangeable and reducible fractions) were mainly transformed into the relatively stable heavy metal fractions (oxidizable and residual fractions). The bioavailability and eco-toxicity of heavy metals in LR were relieved, though the total concentrations of heavy metals increased.     

堆肥处理对污泥腐殖物质形态及其重金属分配的影响

采用透析、凝胶色谱 (SephadexG 75 )研究了污泥堆肥前后腐殖质分子大小的变化及重金属Cu和Zn在各级组分中的分配。透析结果表明 ,污泥经过堆腐以后 ,腐殖质中小分子物质 (<10 0 0Da)组分的含量下降 6 4 % ,而相对高分子组分 (>2 5 0 0 0Da)却增加了 6 8%。凝胶色谱进一步证实 ,污泥经过 4 9d堆腐后 ,腐殖质中大于 2 0 0 0KDa的大分子组分是堆肥起始时的2 3倍。而小分子组分明显减少 ,表现在小分子组分的凝胶洗脱体积明显减少。堆肥腐熟以后 ,腐殖质吸附的Cu、Zn元素含量增加 ,其中Cu主要被吸附在大分子物质上 ,而Zn主要与小分子物质结合     

Influence of bulking agent on sewage sludge composting process

Four types of compost, consisting of mixtures of Acacia dealbata (A) with sewage sludge (SS) were studied in a laboratory reactor. Composting time was 80 days and parameters monitored over this period included temperature, organic matter, pH, CO₂, O₂, C/N ratio, Kjeldahl-N, as well as maturity indexes. All the studied parameters were influenced by the bulking amount used. The highest profile temperature measured was for the A/SS 1/2 (w/w) mixture that reached a maxima temperature of 67 °C and lower maximum temperatures of 52, 48 and 46 °C were observed for A/SS 1/3, 1/1 and 1/0 composts, respectively. The kinetic model used showed that a descent of sewage sludge in the composting mixtures favored the enzyme–substrate affinity. However, an increase in depending on the parameters of the process factors was observed when the sewage sludge ratio was increased in mixtures. The optimal amounts of sewage sludge for co-composting with Acacia indicate that moderate amounts of sludge (1/1) would be the best compromise.     

The effects of applying sewage sludge into Jiangxi red soil on the growth of vegetables and the migration and enrichment of Cu and Zn

Jiangxi red soil was used as the tested soil and water spinach (Ipomoea aquatic) and Chinese chive (Allium tuberosum) were used as the tested vegetables in this study to investigate the effects of different amounts of sewage-sludge application on the growth of vegetables and the migration and enrichment patterns of Cu and Zn in vegetables using the potted method. The results indicated that the application of sewage sludge could improve the properties of red soil and promote vegetable growth. The dry weight of water spinach and Chinese chive reached the maximal levels when treated with the amount of sewage sludge at 4% and 10%, which was 4.38 ± 0.82 g and 1.56 ± 0.31 g, respectively. The dry weights after the application of sewage sludge were all larger than control treatment (CK) without sludge application. With increases in the applied amount of sewage sludge, the concentrations of Cu and Zu in red soil continued to increase, and the peak value was not reached. After the two vegetables were planted, the concentrations of Cu and Zn in red soil decreased by different degrees. The degrees of decrease of Zn were generally higher than those of Cu. The enrichment coefficient of water spinach on Cu showed a trend of increase followed by a decrease and reached the peak value of 1.04 ± 0.38 when the applied amount was 4%. The enrichment coefficient of Chinese chive on Cu overall showed a decreasing trend and did not reach the peak value under the treatment levels used in this experiment. The enrichment pattern of Chinese chive on Zn was not obvious, and the differences among all treatment levels were not significant (p < 0.05). However, the enrichment coefficient after the application of sewage sludge was significantly lower than that without the application of sludge.     

Immobilization of selected heavy metals in sewage sludge by natural zeolites

This contribution presents the possibility of application of natural sorbent (Transcarpathian clinoptylolite (KL)) for immobilization of selected heavy metals in the sewage sludge. The influence of ion-exchange parameters (e.g. time, amount of zeolite) were discussed. Process of immobilization was performed using a static method (Batch). It was found that best possible conditions for immobilization of heavy metal ions were as follows: zeolite fraction 0.7–1.0 mm, 5 h of shaking, zeolite/sewage sludge ratio 2/98.     

Evolution of organic matter in a full-scale composting plant for the treatment of sewage sludge and biowaste by respiration techniques and pyrolysis-GC/MS

A full-scale composting plant treating in two parallel lines sewage sludge and the source-selected organic fraction of municipal solid waste (OFMSW or biowaste) has been completely monitored. Chemical routine analysis proved not to be suitable for an adequate plant monitoring in terms of stabilization and characterization of the process and final compost properties. However, the dynamic respiration index demonstrated to be the most feasible tool to determine the progression of the degradation and stabilization of organic matter for both sewage sludge and OFMSW lines. Both lines exhibited an important degree of stabilization of organic matter using rapid and cumulative respiration indices. Pyrolysis-GC/MS was applied to the most important inputs, outputs, and intermediate points of the plant. It proved to be a powerful tool for the qualitative characterization of molecular composition of organic matter present in solid samples. A full characterization of the samples considered is also presented.     

Quantitative evaluation of heavy metals' pollution hazards in liquefaction residues of sewage sludge

Liquefaction residues (LR) are the main by-products of sewage sludge (SS) liquefaction. This study quantitatively evaluates the potential ecological risk and pollution degrees of heavy metals (Pb, Zn, Cu, Cd, Cr and Ni) in LR versus SS. The leaching rates (R1) of heavy metals in LR were much lower than those in SS, revealing that the mobility/leachability of heavy metals was well suppressed after liquefaction. Geo-accumulation index (Igeo) indicated that the liquefaction process significantly weakened the contamination degrees of heavy metals. Potential ecological risk index (RI) demonstrated that overall risks caused by heavy metals were obviously lowered from 1093.56 (very high risk) in SS to 4.72 and 1.51 (low risk) in LR1 and LR2, respectively. According to the risk assessment code (RAC), each tested heavy metal had no or low risk to the environments after liquefaction. In a word, the pollution hazards of heavy metals in LR were markedly mitigated.     

Structural changes in lipid-free humic acids during composting of sewage sludge

Structural changes in humic acids (HAs), extracted after lipid removal from sewage sludge during composting, were investigated using various chemical methods (elemental analysis, Fourier transform infrared spectroscopy and ¹³C-nuclear magnetic resonance (NMR) spectroscopy). Compared to non-purified HAs, lipid-free HAs (LFHAs) exhibit higher C and N contents and high absorbance around 1652, 1540 and 1230 cm⁻¹, which indicates the intensity of the etherified aromatic structures and nitrogen-containing components. Less absorbance around 2920, 1600, 1414 and 1100 cm⁻¹ could be assigned to their low level of aliphatic compounds, mainly those with a carboxyl group. According to ¹³C-NMR spectroscopy, almost 45% of aliphatic structures are removed by lipid extraction and these correspond mainly to long-chain fatty acids. During composting, significant decomposition of non-substituted alkyl structures and N-containing components occurred, increasing the relative intensity of etherified aromatic structures.     

Effect of carbide sludge (lime) on bioavailability and leachability of heavy metals during rotary drum composting of water hyacinth

Abstract

The bioavailability and leachability of heavy metals play a major role in the toxicity of heavy metals in the compost applied for soil conditioning. A rotary drum composter was used for the study of heavy metal bioavailability and leachability during water hyacinth composting with a mixture of cattle manure, sawdust and lime. Lime was added in 1, 2 and 3% to the mixture of water hyacinth, cattle manure and sawdust at a ratio of 6:3:1 respectively. Influences of physico-chemical parameters on heavy metal bioavailability and leachability were studied during the process. The bioavailability of heavy metals solubility and diethylene triamine penta-acetic acid extractability was examined. The toxicity characteristics leaching procedure (TCLP) test was performed for assessing the hazardous properties of compost. The nutrients and the total concentration of heavy metals were increased during the composting process. The lime was very effective in reducing water solubility, plant availability and leachability of the selected heavy metals (Zn, Cu, Mn, Fe, Ni, Pb, Cd and Cr) during the process. The addition of lime provided a buffer against the decrease in pH and a sufficient amount of Ca that would improve the metabolic activity during composting. The addition of an excess amount of lime slowed the metabolic activity of the microbes due to its high alkalinity. The TCLP test confirms that the heavy metals concentrations in the control and in the lime-amended compost were below the threshold limits.     

Distribution of heavy metals in a sewage oxidation pond and their adsorption in residual solid (sewage sludge ash)

Abstract

Electrometric studies were carried out on the interaction of heavy metal ions such as manganese, chromium, nickel, copper, zinc, cadmium and lead with the extracted organic matter, humic and fulvic acid from the sludge in a sewage oxidation pond. The distribution of heavy metals was between 60 and 97%, which is associated with the solid waste (sludge) of the oxidation pond. The adsorption/removal efficiency of metal ions onto the sludge ash was more than 90% and 97%, respectively, in the pure system. To obtain the ash, the sludge was burnt at 500°C, treated with nitric acid (1+1) to leach out all the metals and then filtered; the residue left on the filter paper was the pure ash. Both this and that coated with organic matter were studied. The adsorption isotherm for metals, humic/fulvic acids and metal-humic/fulvic acid complexes in the metal-free sludge ash and in the organic matter in the pure system were studied using the Freundlich relationship. Good agreement was found suggesting that sediment and humic/fulvic acids have an important role in the mobility, dispersion and sedimentation of metal ions in an aquatic environment. More of these heavy metals are removed in the pure system than in the natural system. This may be due to the lesser availability of humic and fulvic acids in the lagoons during the short detention time of sewage in suspension in the oxidation pond, whereas the sludge which has settled to the bottom of the pond for several years contains rich decomposed organic matter in the form of humic and fulvic acids containing heavy metals. Such pure systems could be useful for the effective removal of heavy metals.     

施污土壤重金属有效态分布及生物有效性

以城市污泥为研究对象,将城市污泥与土壤按照一定的质量比配成污泥混合土壤.采用6种不同性质提取剂(0.05mol/L EDTA、0.1 mol/L CH3 COOH、0.01 mol/L CaC12、1 mol/L CH3COONH4,0.05 mol/L NaHCO3和0.05 mol/L Tris-HCl)分别对污泥混合土壤中重金属(Cd、Pb、Cu和Zn)的螯合态、酸溶态、中性交换态、中性结合态、碱性交换态和蛋白质结合态进行提取,考察污泥的添加对土壤中不同形态重金属的消长规律.通过黑麦草盆栽试验,探究污泥混合土壤中不同形态重金属的植物可利用性.结果表明:污泥混合土壤中重金属螯合态比例较大,占总量的20.3％-40.0％;其次为酸溶态和中性结合态,而中性交换态、碱性交换态和蛋白质结合态的含量较低.污泥的添加促进了黑麦草对Cd、Cu和Zn的吸收,在污泥添加率为44.4％时根部对其吸收量达最大,分别较CK处理增加了0.3、2.3和6.5倍.抑制了对Pb的吸收,在污泥添加率为37.5％时,根部对Pb的吸收较CK处理下降0.4倍.Pearson相关系数分析结果表明:污泥混合土壤中以螯合态、酸溶态和中性结合态存在重金属可被黑麦草吸收利用.     

Green liquor dregs effect on Kraft mill secondary sludge composting

Increased Kraft pulp mill production generates increased solid wastes. In response, composting has emerged as an interesting alternative for disposal of these solid wastes.A central composite factor design was used to investigate the influence of incubation conditions (dregs addition and operation time) on chemical and biological parameters, determining the best in-vessel conditions in order to develop a correct composting design.Dregs helped reduce the pH drop that occurs at the beginning of the process. Biological activities presented high values during the active phase, followed by a decrease with stable final values along with N– and N– trend, which were indicative of mature compost.Dregs addition had not significant effect on the biological activities during composting of Kraft mill sludge. However, moderate amounts of dregs (between 5% and 8%) at operation time of 60–70 days would be the best compromise.     

Biodegradation of heavy oily sludge by a two-step inoculation composting process using synergistic effect of indigenous isolated bacteria

The impact of two-step inoculation of indigenous strains and their synergistic effect in the scaling-up of petroleum hydrocarbons biodegradation from a mineral-based medium (MBM) to a two-phase composting process were investigated. After isolating the strains KA3 and KA4 from heavy oily sludge (HOS), their emulsification index (E₂₄), bacterial adhesion to hydrocarbon (BATH), and oil degradation efficiency were evaluated in the MBM. Then, they were inoculated twice into the composting bioreactors lasted for the primary 8 weeks as the first phase (FP) and subsequent 8 weeks as the second phase (SP). The results indicated that the consortium of the two strains degraded 16-61% of crude oil (1-5% concentration) in the MBM. In the composting reactors, removals of 20 g kg⁻¹ initial concentration of total petroleum hydrocarbons (TPH) were found to be 63.95, 61.00, and 89.35% for the strains KA3, KA4, and their consortium, respectively. The computed biodegradation constants indicated the synergistic effect of the two strains and the effectiveness of the second-step inoculation. The study demonstrated the successful scaling-up of HOS biodegradation from MBM to the two-phase composting process through two-step inoculation of the isolated strains.     

填充料和通气对污泥堆肥过程的影响

试验研究了不同配比的以料和通气状况对污泥堆肥起始升温的影响。结果表明,填充料含是量高的配比升温速度明显比填充料含量低的配比快;高填充料配比的堆体（填充料占堆料的１／２～１／３）在超始升温阶段可以不进行氢气的供给;低填充料的配比和加入回流堆肥的配比（填充料占堆料的１／４～１／９）,由于堆体的孔隙少,则必须进行通气量的调节。     

Intensification of phenol biodegradation by humic substances

Phenol biodegradation was carried out in a batch system by the bacterial strain Cupriavidus metallidurans in the presence of potassium humate that was prepared by alkaline extraction from oxyhumolite. The experiments were focused on the assessment of the humate effect on biodegradation activity of the tested bacterial strain. The achieved results demonstrated that the humate has a positive influence on the biodegradation of phenol and reduces the incubation time necessary for phenol removal. Higher biodegradation rate and more intensive growth were observed during the cultivation in presence of humate in comparison to the cultivation without its addition. Adsorption of the humate on bacterial biomass was observed as well. Subsequently, a phenol biodegradation testing in a continuous-flow system using a biofilm reactor was also carried out. Although the reactor was inoculated by C. metallidurans only, the microbial composition under an aerobic non-aseptic condition during this long-term cultivation changed. The phenol removal efficiency obtained in the biofilm reactor was higher than 92% when phenol concentration in a treated medium was 1200 mg l⁻¹.     

Leaching of iron and toxic heavy metals from anaerobically-digested sewage sludge

Summary Heavy metal-loaded sewage sludge was leached abiotically using FeCl₂ and FeCl₃ which are applied in waste water treatment plants to eliminate phosphate and for coagulation. Due to the hydrolyzing nature of ferric iron, ferric chloride (100 mmll L^–1) was able to solubilize more than 90% of copper and zinc and more than 80% of cadmium, with an optimal pulp density of 3% (w/v), after 10 h of exposition at 25°C. Chromium, lead and nickel were solubilized to an extent of 40–70%. With the exception of copper (redoxolysis), all heavy metals monitored were leached following the principle of acidolysis. Chemical leaching with iron resulted in a secondary contamination of sewage sludge (96 g iron per kg dry weight). The insoluble iron compounds which were precipitated for adsorbed to sludge flocks could be resolubilized with oxalic acid (100 mM, pH<3.3) up to an extent of 90%. Iron was leached by acidolysis and held in solution by complexation with oxalic acid. The pH optimum for the treatment of sewage sludge with 100 mmol L^–1 oxalic acid was pH 3.3. At this pH an excessive solubilization of nutrient elements and compounds (phosphorus, nitrogen, alkali and alkali earth elements) could be avoided concomitantly leaching 75% iron. Furthermore the hydrophobicity of the sewage sludge was significantly reduced as a result of treatment with iron chloride.Thiobacillus ferrooxidans (isolated from arsenopyrite and adapted on sewage sludge) utilized ferrous iron as an energy source in the presence of chloride ions (FeCl₂) as efficiently as ferrous sulphate. No toxic effects of oxalic acid onT. ferrooxidans were observed at the prevailing concentration.     

Heavy metal fractionation during the co-composting of biosolids,deinking paper fibre and green waste

Due to the introduction of the European Union Landfill Directive, composting has become a potentially viable disposal route for some organic wastes. As waste-derived compost is frequently added to soil to improve soil quality, it is important to quantify the environmental risk posed by potentially toxic elements contained within it. Here we used a sequential chemical extraction procedure to investigate the temporal dynamics of heavy metals (Cu, Zn, Pb and Ni) during the co-composting of biosolids, deinking paper fibre and green waste. Overall, composting over 26 weeks reduced the availability of Ni, had no effect on Pb and slightly increased the availability of Cu and Zn. We conclude that although the total Cu and Ni concentrations in the compost exceed legislative guidelines for land application, due to their recalcitrant nature within the compost, this compost posed very little threat to soil or plant quality if used in agriculture or land restoration.     

Effect of low power ultrasonic radiation on anaerobic biodegradability of sewage sludge

The effect of low power ultrasonic radiation on anaerobic biodegradability of sewage sludge was investigated. For this purpose, soluble substances and variation of microbial system of sewage sludge subjected to low power ultrasonic radiation were tested. The well known hydromechanical shear forces and heating effect of low frequency ultrasound plays a major role in the sludge pre treatment process. More, the increase of soluble substance may partly result from the destruction of microbial cell by excess ultrasonic pretreatment, which will inhibit the anaerobic process. By orthogonal tests, the optimal parameters were found to be an exposure time of 15 min, ultrasonic intensity of 0.35 W/cm² and ultrasonic power density of 0.25 W/ml. Under the optimal condition, anaerobic biodegradability of sewage sludge (R_(vss/ss) %) was increased by 67.6%. Consequently, it can be concluded that low power ultrasonic pretreatment is a valid method for improving anaerobic biodegradability of sewage sludge.     

Change in cotton plant quality in response to application of anaerobically digested sewage sludge

Treated municipal sewage sludge (TSS) was applied to the cotton plant at rates of 10, 20 and 30 t/ha per year. Seed cotton yield (71.4%), lint yield (67.7%) and cottonseed yield (74.1%) were increased significantly when sludge was applied at a rate of 30 t/ha (TSS3). The effects of TSS applications on seed yield, lint yield and cottonseed yield were listed as TSS3 > TSS2 > CF > TSS1 > C according to the applications. The increasing TSS levels had a positive effect and increased the total N concentration compared to the control. The highest N value was observed in TSS3 plots, while the lowest value was recorded in control (C) plots. The highest P value was found in control (C) at 0.80% and in 10 t/ha (TSS1) at 0.80%, while the lowest value was found in the TSS2 application (0.70%). The K concentration of cottonseed increased with the increasing TSS rates, from 1.56% in control plots to 2.20% in 20 t/ha application (TSS2). Corresponding to the TSS levels, the calcium of plant tissues was determined by a range of 0.12–0.13%. The treatments of TSS and mineral fertilizer had similar effects on the Mg content of cottonseed, which was in the range of 0.38–0.43%. Na content in plant tissue increased with increasing dose of sludge application compared to control soils. Increasing doses of TSS had no significant effect on the concentrations of iron (Fe), copper (Cu), zinc (Zn), manganese (Mn) and boron (B) in cottonseed. The order of the elements with respect to their amounts in cottonseed was as follows: Fe > Zn > Na > B > Mn > Cu. The concentrations of non-essential elements (Ni, Cd, Cr, Pb, Hg and As) in cottonseed were below the permissible limits.