The conserved undecapeptide shared by thiol-activated cytolysins is involved in membrane binding.

Thiol-activated cytolysins share a conserved hydrophobic, Trp-rich undecapeptide that is suggested to be involved in membrane binding and intercalation. The neutralizing monoclonal antibody PLY-5 recognizes all members of this toxin family and peptide mapping assigned its epitope to the undecapeptide motif. This antibody inhibited binding of the toxins to host cell membranes and the epitope was no longer available for binding when a preformed toxin/membrane complex was tested. These results confirm the model of cytolysin binding suggested by structural data.     

Molecular features of the broadly neutralizing immunoglobulin G1 b12 required for recognition of human immunodeficiency virus type 1 gp120

IgG1 b12 is a broadly neutralizing antibody against human immunodeficiency virus type 1 (HIV-1). The epitope recognized by b12 overlaps the CD4 receptor-binding site (CD4bs) on gp120 and has been a target for vaccine design. Determination of the three-dimensional structure of immunoglobulin G1 (IgG1) b12 allowed modeling of the b12-gp120 interaction in which the protruding third complementarity-determining region (CDR) of the heavy chain (H3) was crucial for antibody binding. In the present study, extensive mutational analysis of the antigen-binding site of Fab b12 was carried out to investigate the validity of the model and to identify residues important for gp120 recognition and, by inference, key to the anti-HIV-1 activity of IgG1 b12. In all, 50 mutations were tested: 40 in H3, 4 each in H2 and L1, and 2 in L3. The results suggest that the interaction of gp120 with H3 of b12 is crucially dependent not only on a Trp residue at the apex of the H3 loop but also on a number of residues at the base of the loop. The arrangement of these residues, including aromatic side chains and side chains that hydrogen bond across the base of the loop, may rigidify H3 for penetration of the recessed CD4-binding cavity. The results further emphasize the importance to gp120 binding of a Tyr residue at the apex of the H2 loop that forms a second finger-like structure and a number of Arg residues in L1 that form a positively charged, shelf-like structure. In general, the data are consistent with the b12-gp120 interaction model previously proposed. At the gene level, somatic mutation is seen to be crucial for the generation of many of the structural features described. The Fab b12 mutants were also tested against the b12 epitope-mimic peptide B2.1, and the reactivity profile had many similarities but also significant differences from that observed for gp120. The paratope map of b12 may facilitate the design of molecules that are able to elicit b12-like activities.     

Differential ligand recognition by the Src and phosphatidylinositol 3-kinase Src homology 3 domains: circular dichroism and ultraviolet resonance Raman studies

Src homology 3 (SH3) domains recognize Pro-rich motifs using a hydrophobic cleft which contains several conserved aromatic residues. To investigate how aromatic residues contribute to ligand recognition, circular dichroism (CD) and 235 nm excited ultraviolet resonance Raman spectroscopies have been applied to Src and phosphatidylinositol 3-kinase (PI3K) SH3s. The CD analysis shows that Src SH3 binds to RPLPPLP (R-core) using aromatic residues with a dissociation constant (K(d)) of 10 microM. Moreover, intensity increases of the Trp and Tyr Raman bands suggest that the interaction is mediated by hydrophobic contacts and/or hydrogen bond formation with both Trp and Tyr residues. In the interaction of Src SH3 with VSLARRPLPPLP (VSL12) (K(d) 0.8 microM), Trp118 appears to form a strong hydrogen bond with VSL12, judging from significant intensity increases of the Trp Raman bands and the reported complex structure. In contrast, PI3K SH3 binds to R-core and VSL12 with lower affinities (K(d) 34 and 18 microM, respectively), and the interactions are suggested to be mediated mainly by hydrophobic contacts and/or hydrogen bond formation with Tyr residue(s). In the D21N mutant (Asp21 --> Asn) of PI3K SH3, whose hydrophobic cleft is deformed, Trp55 is shown to be responsible for the interaction with VSL12 by intensity increases of the Trp Raman bands. However, the affinity is severely decreased (K(d) 330 microM). These observations imply that SH3 domains associate with their ligands with distinct use of aromatic residues and that hydrogen bond formation with an SH3-conserved Trp residue in the well-ordered hydrophobic cleft is important for stable complex formation.     

Human immunodeficiency virus type 1-neutralizing monoclonal antibody 2F5 is multispecific for sequences flanking the DKW core epitope

Human monoclonal antibody 2F5 is one of a few human antibodies that neutralize a broad range of HIV-1 primary isolates. The 2F5 epitope on gp41 includes the sequence ELDKWA, with the core residues, DKW, being critical for antibody binding. HIV-neutralizing antibodies have never been elicited by immunization with peptides bearing ELDKWA, suggesting that important part(s) of the 2F5 paratope remain unidentified. The use of longer peptides extending beyond ELDKWA has resulted in increased epitope antigenicity, but neutralizing antibodies have not been generated. We sought to develop peptides that bind to 2F5, and that function as specific probes of the 2F5 paratope. Thus, we used 2F5 to screen a set of phage-displayed, random peptide libraries. Tight-binding clones from the random peptide libraries displayed sequence variability in the regions flanking the DKW motif. To further reveal flanking regions involved in 2F5 binding, two semi-defined libraries were constructed having 12 variegated residues either N-terminal or C-terminal to the DKW core (X(12)-AADKW and AADKW-X(12), respectively). Three clones isolated from the AADKW-X(12) library had similar high affinities, despite a lack of sequence homology among them, or with gp41. The contribution of each residue of these clones to 2F5 binding was evaluated by Ala substitution and amino acid deletion studies, and revealed that each clone bound 2F5 by a different mechanism. These results suggest that the 2F5 paratope is formed by at least two functionally distinct regions: one that displays specificity for the DKW core epitope, and another that is multispecific for sequences C-terminal to the core epitope. The implications of this second, multispecific region of the 2F5 paratope for its unique biological function are discussed.     

The long third complementarity-determining region of the heavy chain is important in the activity of the broadly neutralizing anti-human immunodeficiency virus type 1 antibody 2F5

The human monoclonal antibody 2F5 neutralizes primary human immunodeficiency virus type 1 (HIV-1) with rare breadth and potency. A crystal structure of a complex of 2F5 and a peptide corresponding to its core epitope on gp41, ELDKWAS, revealed that the peptide interacts with residues at the base of the unusually long (22-residue) third complementarity-determining region of the heavy chain (CDR H3) but not the apex. Here, we perform alanine-scanning mutagenesis across CDR H3 and make additional substitutions of selected residues to map the paratope of Fab 2F5. Substitution of residues from the base of the H3 loop or from CDRs H1, H2, and L3, which are proximal to the peptide, significantly diminished the affinity of Fab 2F5 for gp41 and a short peptide containing the 2F5 core motif. However, nonconservative substitutions to a phenylalanine residue at the apex of the H3 loop also markedly decreased 2F5 binding to both gp41 and the peptide, suggesting that recognition of the core epitope is crucially dependent on features at the apex of the H3 loop. Furthermore, substitution at the apex of the H3 loop had an even more pronounced effect on the neutralizing activity of 2F5 against three sensitive HIV-1. These observations present a challenge to vaccine strategies based on peptide mimics of the linear epitope.     

Structure of the antimicrobial peptide tritrpticin bound to micelles: a distinct membrane-bound peptide fold

Tritrpticin is a member of the cathelicidin family, a group of diverse antimicrobial peptides found in neutrophil granules. The three Trp and four Arg residues in the sequence VRRFPWWWPFLRR make this a Trp-rich cationic peptide. The structure of tritrpticin bound to membrane-mimetic sodium dodecyl sulfate micelles has been determined using conventional two-dimensional NMR methods. It forms two adjacent turns around the two Pro residues, a distinct fold for peptide-membrane interaction. The first turn involves residues 4-7, followed immediately by a second well-defined 3(10)-helical turn involving residues 8-11. The hydrophobic residues are clustered together and are clearly separated from the basic Arg residues, resulting in an amphipathic structure. Favorable interactions between the unusual amphipathic fold and the micelle surface are probably key to determining the peptide structure. NMR studies of the peptide in the micelle in the presence of the spin-label 5-doxylstearic acid determined that tritrpticin lies near the surface of the micelle, where its many aromatic side chains appear to be equally partitioned into the hydrophilic-hydrophobic interface. Additional fluorescence studies confirmed that the tryptophan residues are inserted into the micelle and are partially protected from the effects of the soluble fluorescence quencher acrylamide.     

Investigation of complexes formed between gene 32 protein from bacteriophage T4 and heavy-atom-modified single-stranded polynucleotides using optical detection of magnetic resonance

Optical detection of triplet-state magnetic resonance (ODMR) is employed to study the complexes formed between gene 32 protein (GP32), a single-stranded DNA-binding protein from bacteriophage T4, and the heavy-atom-derivatized polynucleotides poly(5-HgU) and poly(5-BrU). The triplet-state properties of some of the tryptophan (Trp) residues in the complexes are dramatically different from those in the free protein, in that they are subject to an external heavy-atom effect. Direct evidence for the presence of a heavy-atom effect, and hence a close-range interaction between mercurated or brominated nucleotide bases and Trp residues in the complex, is provided by the observation of the zero-field (D) + (E) ODMR transition of Trp, which is not normally observed in the absence of a heavy-atom perturbation. The amplitude-modulated phosphorescence-microwave double-resonance (AM-PMDR) technique is employed to selectively capture the phosphorescence spectrum originating from the heavy-atom-perturbed Trp residue(s) in the GP32-poly(5-HgU) complex. Arguments based on our experimental results lead to the conclusion that the heavy-atom perturbation arises from aromatic stacking interactions between Trp and mercurated bases. Wavelength-selected ODMR measurements reveal the existence of two environmentally distinct and spectrally different types of Trp in GP32. One of these types is perturbed selectively by the heavy atom and hence undergoes stacking interactions with the heavy-atom-derivatized bases of the polynucleotide while the second type of Trp residue is unaffected.(ABSTRACT TRUNCATED AT 250 WORDS)     

Paratope and epitope mapping of the antithrombotic antibody 6B4 in complex with platelet glycoprotein Ibalpha

The monoclonal antibody 6B4 has a potent antithrombotic effect in nonhuman primates by binding to the flexible loop, also known as the beta-switch region (amino acids 230-242), of glycoprotein Ibalpha (GPIbalpha). This interaction blocks, in high shear stress conditions, the specific interaction between GPIbalpha and von Willebrand factor suppressing platelet deposition to the damaged vessel wall, a key event in the pathogenesis of arterial thrombosis. To understand the interactions between this antibody and its antigen at the amino acid level, we here report the identification of the paratope and epitope in 6B4 and GPIbalpha, respectively, by using computer modeling and site-directed mutagenesis. The docking programs ZDOCK (rigid body docking) and HADDOCK (flexible docking) were used to model the interaction of 6B4 with GPIbalpha and to delineate the respective paratope and epitope. 6B4 and GPIbalpha mutants were constructed and assayed for their capacity to bind GPIbalpha and 6B4, respectively. From these data, it is found that the paratope of 6B4 is mainly formed by five residues: Tyr(27D), Lys(27E), Asp(28), and Glu(93) located in light chain CDR1 and -3, respectively, and Tyr(100C) of the heavy chain CDR3. These residues form a valley, where the GPIbalpha flexible loop can bind via residues Asp(235) and Lys(237). The experimental results were finally used to build a more accurate docking model. Taken together, this information provides guidelines for the design of new derivatized lead compounds with antithrombotic properties.     

Mutational analysis of a CBM family 5 chitin-binding domain of an alkaline chitinase from Bacillus sp. J813

Chitinase J from alkaliphilic Bacillus sp. J813 comprises a glycoside hydrolase (GH) family 18 catalytic domain (CatD), a fibronectin type III like domain, and a carbohydrate-binding module (CBM) family 5 chitin-binding domain (ChBD). It has been suggested that the ChBD binds to insoluble chitin and enhances its degradation by the CatD. To investigate the roles of two aromatic residues (Trp541 and Trp542), which are exposed on the surface of the ChBD, mutational analysis was performed. Single and double mutations of the two aromatic residues decreased binding and hydrolyzing abilities toward insoluble chitin. This result suggests that the ChBD binds to chitin by hydrophobic interactions via two surface-exposed aromatic residues. However, the double mutant, which has no such aromatic residue, bound to chitin at pH 5.2, probably by electrostatic interactions. Moreover, the ChBD bound to insoluble chitosan by electrostatic interactions.     

Tryptophan rich peptides: influence of indole rings on backbone conformation

Synthetic peptides with defined secondary structure scaffolds, namely hairpins and helices, containing tryptophan residues, have been investigated in this study to probe the influence of a large number of aromatic amino acids on backbone conformations. Solution NMR investigations of Boc-W-L-W-(D)P-G-W-L-W-OMe (peptide 1), designed to form a well-folded hairpin, clearly indicates the influence of flanking aromatic residues at the (D)Pro-Gly region on both turn nucleation and strand propagation. Indole-pyrrolidine interactions in this peptide lead to the formation of the less-frequent type I' turn at the (D)Pro-Gly segment and frayed strand regions, with the strand residues adopting local helical conformations. An analog of peptide 1 with an Aib-Gly turn-nucleated hairpin (Boc-W-L-W-U-G-W-L-W-OMe (peptide 2)) shows a preference for helical structures in solution, in both chloroform and methanol. Peptides with either one (Boc-W-L-W-U-W-L-W-OMe (peptide 3)) or two (Boc-U-W-L-W-U-W-L-W-OMe (peptide 4)) helix-nucleating Aib residues give rise to the well-folded helical conformations in the chloroform solution. The results are indicative of a preference for helical folding in peptides containing a large number of Trp residues. Investigation of a tetrapeptide analog of peptide 2, Boc-W-U-G-W-OMe (peptide 5), in solution and in the crystal state (by X-ray diffraction), also indicates a preference for a helical fold. Additionally, peptide 5 is stabilized in crystals by both aromatic interactions and an array of weak interactions. Examination of Trp-rich sequences in protein structures, however, reveals no secondary structure preference, suggesting that other stabilizing interactions in a well-folded protein may offset the influence of indole rings on backbone conformations.     

Mutational Analysis of a CBM Family 5 Chitin-Binding Domain of an Alkaline Chitinase from Bacillus sp. J813

Chitinase J from alkaliphilic Bacillus sp. J813 comprises a glycoside hydrolase (GH) family 18 catalytic domain (CatD), a fibronectin type III like domain, and a carbohydrate-binding module (CBM) family 5 chitin-binding domain (ChBD). It has been suggested that the ChBD binds to insoluble chitin and enhances its degradation by the CatD. To investigate the roles of two aromatic residues (Trp541 and Trp542), which are exposed on the surface of the ChBD, mutational analysis was performed. Single and double mutations of the two aromatic residues decreased binding and hydrolyzing abilities toward insoluble chitin. This result suggests that the ChBD binds to chitin by hydrophobic interactions via two surface-exposed aromatic residues. However, the double mutant, which has no such aromatic residue, bound to chitin at pH 5.2, probably by electrostatic interactions. Moreover, the ChBD bound to insoluble chitosan by electrostatic interactions.     

Analysis of the interactions of human ribonuclease inhibitor with angiogenin and ribonuclease A by mutagenesis: importance of inhibitor residues inside versus outside the C-terminal "hot spot"

Ribonuclease inhibitor (RI) binds diverse mammalian RNases with extraordinary avidity. Here, we have investigated the structural basis for this tight binding and broad specificity by mutational analysis of the complexes of RI with angiogenin (Ang) and RNase A (K(D)=0.5 fM and 43 fM, respectively). Both crystal structures are known; the interfaces are large, and the ligands dock similarly, although few of the specific interactions formed are analogous. Our previous mutagenesis studies focused primarily on one contact region, containing RI 434-438 and the enzymatic active site. Many single-residue replacements produced extensive losses of binding energy (2.3-5.9 kcal/mol), suggesting that this region constitutes a "hot spot" in both cases. We have now explored the roles of most of the remaining RI residues that interact with Ang and/or RNase A. One major cluster in each complex lies in a Trp-rich area of RI, containing Trp261, Trp263, Trp318, and Trp375. Although the energy losses from individual replacements in this portion of the Ang complex were small-to-moderate (0-1.5 kcal/mol), the changes from multiple substitutions were much greater than additive, and the binding energy provided by this region is estimated to be approximately 6 kcal/mol (30 % of total). Effects of replacing combinations of hot spot components had also been found to be superadditive, and this negative cooperativity is now shown to extend to the neighboring contact residue RI Ser460. The overall contribution of the hot spot, taking superadditivity into account, is then approximately 14-15 kcal/mol. The hot spot and Trp-rich regions, although spatially well separated, are themselves functionally linked. No other parts of the RI-Ang interface appear to be energetically important. Binding of RNase A is more sensitive to substitutions throughout the interface, with free energy losses>/=1 kcal/mol produced by nearly all replacements examined, so that the sum of losses greatly exceeds the binding energy of the complex. This discrepancy can be explained, in part, by positive cooperativity, as evident from the subadditive effects observed when combinations of residues in either the hot spot or Trp-rich region are replaced. These findings suggest that the binding energy may be more widely distributed in the RNase A complex than in the Ang complex.     

Paratope plasticity in diverse modes facilitates molecular mimicry in antibody response

The immune response against methyl-alpha-D-mannopyranoside mimicking 12-mer peptide (DVFYPYPYASGS) was analyzed at the molecular level towards understanding the equivalence of these otherwise disparate Ags. The Ab 7C4 recognized the immunizing peptide and its mimicking carbohydrate Ag with comparable affinities. Thermodynamic analyses of the binding interactions of both molecules suggested that the mAb 7C4 paratope lacks substantial conformational flexibility, an obvious possibility for facilitating binding to chemically dissimilar Ags. Favorable changes in entropy during binding indicated the importance of hydrophobic interactions in recognition of the mimicking carbohydrate Ag. Indeed, the topology of the Ag-combining site was dominated by a cluster of aromatic residues, contributed primarily by the specificity defining CDR H3. Epitope-mapping analysis demonstrated the critical role of three aromatic residues of the 12-mer in binding to the Ab. Our studies delineate a mechanism by which mimicry is manifested in the absence of either structural similarity of the epitopes or conformational flexibility in the paratope. An alternate mode of recognition of dissimilar yet mimicking Ags by the anti-peptide Ab involves plasticity associated with aromatic/hydrophobic and van der Waals interactions. Thus, antigenic mimicry may be a consequence of paratope-specific modulations rather than being dependent only on the properties of the epitope. Such modulations may have evolved toward minimizing the consequences of antigenic variation by invading pathogens.     

Crystal structure of an antibody bound to an immunodominant peptide epitope: novel features in peptide-antibody recognition

The crystal structure of Fab of an Ab PC283 complexed with its corresponding peptide Ag, PS1 (HQLDPAFGANSTNPD), derived from the hepatitis B virus surface Ag was determined. The PS1 stretch Gln2P to Phe7P is present in the Ag binding site of the Ab, while the next three residues of the peptide are raised above the binding groove. The residues Ser11P, Thr12P, and Asn13P then loop back onto the Ag-binding site of the Ab. The last two residues, Pro14P and Asp15P, extend outside the binding site without forming any contacts with the Ab. The PC283-PS1 complex is among the few examples where the light chain complementarity-determining regions show more interactions than the heavy chain complementarity-determining regions, and a distal framework residue is involved in Ag binding. As seen from the crystal structure, most of the contacts between peptide and Ab are through the five residues, Leu3-Asp4-Pro5-Ala6-Phe7, of PS1. The paratope is predominantly hydrophobic with aromatic residues lining the binding pocket, although a salt bridge also contributes to stabilizing the Ag-Ab interaction. The molecular surface area buried upon PS1 binding is 756 A(2) for the peptide and 625 A(2) for the Fab, which is higher than what has been seen to date for Ab-peptide complexes. A comparison between PC283 structure and a homology model of its germline ancestor suggests that paratope optimization for PS1 occurs by improving both charge and shape complementarity.     

Antibody-specified B-cell epitope prediction in line with the principle of context-awareness

Context-awareness is a characteristic in the recognition between antigens and antibodies, highlighting the reconfiguration of epitope residues when an antigen interacts with a different antibody. A coarse binary classification of antigen regions into epitopes, or nonepitopes without specifying antibodies may not accurately reflect this biological reality. Therefore, we study an antibody-specified epitope prediction problem in line with this principle. This problem is new and challenging as we pinpoint a subset of the antigenic residues from an antigen when it binds to a specific antibody. We introduce two kinds of associations of the contextual awareness: 1) residues-residues pairing preference, and 2) the dependence between sets of contact residue pairs. Preference plays a bridging role to link interacting paratope and epitope residues while dependence is used to extend the association from one-dimension to two-dimension. The paratope/epitope residues' relative composition, cooperativity ratios, and Markov properties are also utilized to enhance our method. A nonredundant data set containing 80 antibody-antigen complexes is compiled and used in the evaluation. The results show that our method yields a good performance on antibody-specified epitope prediction. On the traditional antibody-ignored epitope prediction problem, a simplified version of our method can produce a competitive, sometimes much better, performance in comparison with three structure-based predictors.     

Understanding the molecular mechanism of the broad and potent neutralization of HIV-1 by antibody VRC01 from the perspective of molecular dynamics simulation and binding free energy calculations

VRC01 is one of the most broadly and potently neutralizing HIV-1 antibodies known-it has been shown to neutralize 91?% of the tested primary isolate Env pseudoviruses by recognizing the viral envelope glycoprotein gp120. To explore the mechanism of HIV-1 neutralization by VRC01 and thus obtain valuable information for vaccine design, we performed molecular dynamics simulations and binding free energy calculations for apo-VRC01, apo-gp120, and the gp120-VRC01 complex. For gp120, residue energy decomposition analysis showed that the hotspot residues Asn280, Lys282, Asp368, Ile371, and Asp457 are located in three primary loops, including the CD4-binding loop, loop D, and loop V5. For VRC01, the hotspot residues Trp47, Trp50, Asn58, Arg61, Gln64, Trp100, and Tyr91 mainly come from CDR2 of the heavy chain. By decomposing the binding free energy into different components, intermolecular van der Waals interactions and nonpolar solvation were found to dominate the binding process. Principal component analysis of loops D and V5, which are related to neutralization resistance, indicated that these two areas have a larger conformational space in apo-gp120 compared to bound gp120. A comparison of three representative structures from the cluster analysis of loops D and V5 indicated that changes primarily occur at the tip of loop V5, and are caused by fluctuations in the terminal Glu1 residue of the antibody. This information can be used to guide the design of vaccines and small molecule inhibitors.     

The residue composition of the aromatic anchor of the second transmembrane helix determines the signaling properties of the aspartate/maltose chemoreceptor Tar of Escherichia coli

Repositioning of the tandem aromatic residues (Trp-209 and Tyr-210) at the cytoplasmic end of the second transmembrane helix (TM2) modulates the signal output of the aspartate/maltose chemoreceptor of Escherichia coli (Tar(Ec)). Here, we directly assessed the effect of the residue composition of the aromatic anchor by studying the function of a library of Tar(Ec) variants that possess all possible combinations of Ala, Phe, Tyr, and Trp at positions 209 and 210. We identified three important properties of the aromatic anchor. First, a Trp residue at position 209 was required to maintain clockwise (CW) signal output in the absence of adaptive methylation, but adaptive methylation restored the ability of all of the mutant receptors to generate CW rotation. Second, when the aromatic anchor was replaced with tandem Ala residues, signaling was less compromised than when an Ala residue occupied position 209 and an aromatic residue occupied position 210. Finally, when Trp was present at position 209, the identity of the residue at position 210 had little effect on baseline signal output or aspartate chemotaxis, although maltose taxis was significantly affected by some substitutions at position 210. All of the mutant receptors we constructed supported some level of aspartate and maltose taxis in semisolid agar swim plates, but those without Trp at position 209 were overmethylated in their baseline signaling state. These results show the importance of the cytoplasmic aromatic anchor of TM2 in maintaining the baseline Tar(Ec) signal output and responsiveness to attractant signaling.     

Dissecting contact potentials for proteins: relative contributions of individual amino acids

Mimotopes mimic the three-dimensional topology of an antigen epitope, and are frequently recognized by antibodies with affinities comparable to those obtained for the original antibody-antigen interaction. Peptides and anti-idiotypic antibodies are two classes of protein mimotopes that mimic the topology (but not necessarily the sequence) of the parental antigen. In this study, we combine these two classes by selecting mimotopes based on single domain IgNAR antibodies, which display exceptionally long CDR3 loop regions (analogous to a constrained peptide library) presented in the context of an immunoglobulin framework with adjacent and supporting CDR1 loops. By screening an in vitro phage-display library of IgNAR variable domains (V(NAR)s) against the target antigen monoclonal antibody MAb5G8, we obtained four potential mimotopes. MAb5G8 targets a linear tripeptide epitope (AYP) in the flexible signal sequence of the Plasmodium falciparum Apical Membrane Antigen-1 (AMA1), and this or similar motifs were detected in the CDR loops of all four V(NAR)s. The V(NAR)s, 1-A-2, -7, -11, and -14, were demonstrated to bind specifically to this paratope by competition studies with an artificial peptide and all showed enhanced affinities (3-46 nM) compared to the parental antigen (175 nM). Crystallographic studies of recombinant proteins 1-A-7 and 1-A-11 showed that the SYP motifs on these V(NAR)s presented at the tip of the exposed CDR3 loops, ideally positioned within bulge-like structures to make contact with the MAb5G8 antibody. These loops, in particular in 1-A-11, were further stabilized by inter- and intra- loop disulphide bridges, hydrogen bonds, electrostatic interactions, and aromatic residue packing. We rationalize the higher affinity of the V(NAR)s compared to the parental antigen by suggesting that adjacent CDR1 and framework residues contribute to binding affinity, through interactions with other CDR regions on the antibody, though of course definitive support of this hypothesis will rely on co-crystallographic studies. Alternatively, the selection of mimotopes from a large (<4 x 10(8)) constrained library may have allowed selection of variants with even more favorable epitope topologies than present in the original antigenic structure, illustrating the power of in vivo selection of mimotopes from phage-displayed molecular libraries.     

Investigation of a conserved stacking interaction in target site recognition by the U1A protein

Three highly conserved aromatic residues in RNA recognition motifs (RRM) participate in stacking interactions with RNA bases upon binding RNA. We have investigated the contribution of one of these aromatic residues, Phe56, to the complex formed between the N-terminal RRM of the spliceosomal protein U1A and stem–loop 2 of U1 snRNA. Previous work showed that the aromatic group is important for high affinity binding. Here we probe how mutation of Phe56 affects the kinetics of complex dissociation, the strength of the hydrogen bonds formed between U1A and the base that stacks with Phe56 (A6) and specific target site recognition. Substitution of Phe56 with Trp or Tyr increased the rate of dissociation of the complex, consistent with previously reported results. However, substitution of Phe56 with His decreased the rate of complex association, implying a change in the initial formation of the complex. Simultaneous modification of residue 56 and A6 revealed energetic coupling between the aromatic group and the functional groups of A6 that hydrogen bond to U1A. Finally, mutation of Phe56 to Leu reduced the ability of U1A to recognize stem–loop 2 correctly. Taken together, these experiments suggest that Phe56 contributes to binding affinity by stacking with A6 and participating in networks of energetically coupled interactions that enable this conserved aromatic amino acid to play a complex role in target site recognition.