Prey size selection and distance estimation in foraging adult dragonflies

To determine whether perching dragonflies visually assess the distance to potential prey items, we presented artificial prey, glass beads suspended from fine wires, to perching dragonflies in the field. We videotaped the responses of freely foraging dragonflies (Libellula luctuosa and Sympetrum vicinum—Odonata, suborder Anisoptera) to beads ranging from 0.5 mm to 8 mm in diameter, recording whether or not the dragonflies took off after the beads, and if so, at what distance. Our results indicated that dragonflies were highly selective for bead size. Furthermore, the smaller Sympetrum preferred beads of smaller size and the larger Libellula preferred larger beads. Each species rejected beads as large or larger than their heads, even when the beads subtended the same visual angles as the smaller, attractive beads. Since bead size cannot be determined without reference to distance, we conclude that dragonflies are able to estimate the distance to potential prey items. The range over which they estimate distance is about 1 m for the larger Libellula and 70 cm for the smaller Sympetrum. The mechanism of distance estimation is unknown, but it probably includes both stereopsis and the motion parallax produced by head movements.     

The effect of decreasing computed tomography dosage on radiostereometric analysis (RSA) accuracy at the glenohumeral joint

Standard, beaded radiostereometric analysis (RSA) and markerless RSA often use computed tomography (CT) scans to create three-dimensional (3D) bone models. However, ethical concerns exist due to risks associated with CT radiation exposure. Therefore, the aim of this study was to investigate the effect of decreasing CT dosage on RSA accuracy. Four cadaveric shoulder specimens were scanned using a normal-dose CT protocol and two low-dose protocols, where the dosage was decreased by 89% and 98%. 3D computer models of the humerus and scapula were created using each CT protocol. Bi-planar fluoroscopy was used to image five different static glenohumeral positions and two dynamic glenohumeral movements, of which a total of five static and four dynamic poses were selected for analysis. For standard RSA, negligible differences were found in bead (0.21±0.31mm) and bony landmark (2.31±1.90mm) locations when the CT dosage was decreased by 98% (p-values>0.167). For markerless RSA kinematic results, excellent agreement was found between the normal-dose and lowest-dose protocol, with all Spearman rank correlation coefficients greater than 0.95. Average root mean squared errors of 1.04±0.68mm and 2.42±0.81° were also found at this reduced dosage for static positions. In summary, CT dosage can be markedly reduced when performing shoulder RSA to minimize the risks of radiation exposure. Standard RSA accuracy was negligibly affected by the 98% CT dose reduction and for markerless RSA, the benefits of decreasing CT dosage to the subject outweigh the introduced errors.     

肩袖间隙影像解剖及常见病变的研究进展

肩袖间隙在解剖学上是肩关节的一个复合区域,在维持肩关节稳定性和保护肱二头肌长头肌腱功能起重要作用。对肩袖间隙解剖结构及功能的深入认识有助于肩袖间隙损伤性病变、挛缩性病变等的及时诊断和合理治疗。影像学检查尤其是磁共振逐步成为肩袖间隙疾病最主要的检查方法,包括常规扫描、直接及间接性磁共振肩关节造影、增强扫描等。本文将就肩袖间隙的影像解剖及常见病变的相关研究进行综述。     

The effect of glenohumeral plane of elevation on supraspinatus subacromial proximity

Shoulder pain is a common clinical problem affecting most individuals in their lifetime. Despite the high prevalence of rotator cuff pathology in these individuals, the pathogenesis of rotator cuff disease remains unclear. Position and motion related mechanisms of rotator cuff disease are often proposed, but poorly understood. The purpose of this study was to determine the impact of systematically altering glenohumeral plane on subacromial proximities across arm elevation as measures of tendon compression risk. Three-dimensional models of the humerus, scapula, coracoacromial ligament, and supraspinatus were reconstructed from MRIs in 20 subjects. Glenohumeral elevation was imposed on the humeral and supraspinatus tendon models for three glenohumeral planes, which were chosen to represent flexion, scapular plane abduction, and abduction based on average values from a previous study of asymptomatic individuals. Subacromial proximity was quantified as the minimum distance between the supraspinatus tendon and coracoacromial arch (acromion and coracoacromial ligament), the surface area of the supraspinatus tendon within 2 mm proximity to the coracoacromial arch, and the volume of intersection between the supraspinatus tendon and coracoacromial arch. The lowest modeled subacromial supraspinatus compression measures occurred during flexion at lower angles of elevation. This finding was consistent across all three measures of subacromial proximity. Knowledge of this range of reduced risk may be useful to inform future studies related to patient education and ergonomic design to prevent the development of shoulder pain and dysfunction.     

An MRI Study of Symptomatic Adhesive Capsulitis

Background

Appilication of MR imaging to diagnose Adhesive Capsulitis (AC) has previously been described. However, there is insufficient information available for the MRI analysis of AC. This study is to describe and evaluate the pathomorphology of the shoulder in Asian patients with AC compared to healthy volunteers.

Methodology/Principal Findings

60 Asian patients with clinically diagnosed AC and 60 healthy volunteers without frozen shoulder underwent MRI of the shoulder joint. All subjects who were age- and sex-matched control ones underwent routine MRI scans of the affected shoulder, including axial, oblique coronal, oblique sagittal T1WI SE and coronal oblique T2WI FSE sequences. Significant abnormal findings were observed on MRI, especially at the rotator cuff interval. The coracohumeral ligament (CHL), articular capsule thickness in the rotator cuff interval as well as the fat space under coracoid process were evaluated. MRI showed that patients with adhesive capsulitis had a significantly thickened coracohumeral ligament and articular capsule in the rotator cuff interval compared to the control subjects (4.2 vs. 2.4 mm, 7.2 vs. 4.4 mm; p<0.05). Partial or complete obliteration of the subcoracoid fat triangle was significantly more frequent in patients with adhesive capsulitis compared with control subjects (73% vs. 13%, 26% vs. 1.6%; p<0.001). Synovitis-like abnormality around the long biceps tendon was significantly more common in patients with adhesive capsulitis than in control subjects. With regards to the inter-observer variability, two MR radiologists had an excellent kappa value of 0.86.

Conclusions/Significance

MRI can be used to show characteristic findings in diagnosing AC. Thickening of the CHL and the capsule at the rotator cuff interval and complete obliteration of the fat triangle under the coracoid process have been shown to be the most characteristic MR findings seen with AC.     

Muscle efficiency in total shoulder prosthesis implantation: dependence on position of the humeral head and rotator cuff function]

Modern shoulder prostheses permit an anatomic reconstruction of the joint, although the biomechanical advantages are not proven. The goal of this study was to investigate the relationship between position of the humeral head and function of the shoulder prosthesis (muscle efficiency). Shoulder elevation-motion and rotator cuff defects were simulated in vitro in a robot-assisted shoulder simulator. The EPOCA Custom Offset shoulder prosthesis (Argomedical AG, Cham, CH) was implanted in seven normal shoulders (77 +/- 20 kg, 55 +/- 14 years). Active elevation was simulated by hydraulic cylinders, and scapulothoratic motion by a specially programmed industrial robot. Muscle efficiency (elevation-angle/muscle-force of the deltoid muscle) was measured in anatomic (ANA), medialised (MED) and lateralised (LAT) positions of the humeral head, with or without rotator cuff muscle deficiency. Medialisation increased efficiency by 0.03 +/- 0.04 deg/N (p = 0.022), lateralisation decreased it by 0.04 +/- 0.06 deg/N (p = 0.009). Supraspinatus muscle deficiency increased the deltoid force required to elevate the arm, and thus decreased efficiency (ANA p = 0.091, MED p = 0.018, LAT p = 0.028). The data confirm that the position of the humeral head affects the mechanics of total shoulder arthroplasty. Medialisation increases efficiency of the deltoid muscle and may prove useful in compensating isolated supraspinatus muscle deficiency. Lateralisation, in contrast, leads to an unfavorable situation.     

Effect of rotator cuff exercise on humeral rotation torque in healthy individuals

Conservative management of rotator cuff pathology often involves certain therapeutic exercises. Although a major goal of these exercises is to increase strength of the rotator cuff, little empirical evidence supports this assertion. In this study, 34 nonpathologic young adults were pretested using a LIDO Multijoint II isokinetic device for average and peak torque generated during internal and external rotation. Subjects were arbitrarily assigned to a right-arm- or left-arm-trained group, exercised for 4 weeks, and then posttested for changes in humeral rotation torque. Moderate but significant increases in torque (8-10%) as well as in total work done were observed in both groups, only in the trained arm. Subjects who trained the nondominant (left) arm experienced gains similar to those who trained the right arm. Gains were significant in the case of both internal and external rotation (also average as well as peak torque), with men and women experiencing the same relative increases. These data, in addition to supporting the use of selected exercises to increase humeral rotation torque in a healthy population, offer a potential model for the rehabilitation of patients with rotator cuff injury.     

Contributions of the individual muscles of the shoulder to glenohumeral joint stability during abduction

The aim of this study was to determine the relative contributions of the deltoid and rotator cuff muscles to glenohumeral joint stability during arm abduction. A three-dimensional model of the upper limb was used to calculate the muscle and joint-contact forces at the shoulder for abduction in the scapular plane. The joints of the shoulder girdle-sternoclavicular joint, acromioclavicular joint, and glenohumeral joint-were each represented as an ideal three degree-of-freedom ball-and-socket joint. The articulation between the scapula and thorax was modeled using two kinematic constraints. Eighteen muscle bundles were used to represent the lines of action of 11 muscle groups spanning the glenohumeral joint. The three-dimensional positions of the clavicle, scapula, and humerus during abduction were measured using intracortical bone pins implanted into one subject. The measured bone positions were inputted into the model, and an optimization problem was solved to calculate the forces developed by the shoulder muscles for abduction in the scapular plane. The model calculations showed that the rotator cuff muscles (specifically, supraspinatus, subscapularis, and infraspinatus) by virtue of their lines of action are perfectly positioned to apply compressive load across the glenohumeral joint, and that these muscles contribute most significantly to shoulder joint stability during abduction. The middle deltoid provides most of the compressive force acting between the humeral head and the glenoid, but this muscle also creates most of the shear, and so its contribution to joint stability is less than that of any of the rotator cuff muscles.     

Identification of scapular kinematics using surface mapping: a validation study

The immediate goal of this study was to develop and validate a noninvasive, computational surface mapping approach for measuring scapular kinematics by using available motion capture technology in an innovative manner. The long-term goal is to facilitate clinical determination of the role of the scapula in children with brachial plexus birth palsy (BPBP). The population for this study consisted of fourteen healthy adults with prominent scapulae. Subject-specific scapular templates were created using the coordinates of five scapular landmarks obtained from palpation with subjects seated and arms relaxed in a neutral position. The scapular landmarks were re-palpated and their locations recorded in the six arm positions of the modified Mallet classification. The six Mallet positions were repeated with approximately 300 markers covering the scapula. The markers formed a surface map covering the tissue over the scapula. The scapular template created in the neutral position was iteratively fit to the surface map of each trial, providing an estimate of the orientation of the scapula. These estimates of scapular orientation were compared to the known scapular orientation determined from the scapular landmarks palpated in each Mallet position. The magnitude of the largest mean difference about an anatomical axis between the two measures of scapular orientation was 3.8° with an RMS error of 5.9°. This technique is practical for populations with visibly prominent scapulae (e.g., BPBP patients), for which it is a viable alternative to existing clinical methods with comparable accuracy.     

Reliability of confocal microscopy spectral imaging systems: use of multispectral beads.

BACKGROUND: There is a need for a standardized, impartial calibration, and validation protocol on confocal spectral imaging (CSI) microscope systems. To achieve this goal, it is necessary to have testing tools to provide a reproducible way to evaluate instrument performance. METHODS: We evaluated fluorescent spectral beads (FocalCheck) from Molecular Probes/Invitrogen that consist of four pairs with emissions between 500 and 725 nm and a europium macrocycle quantum dye bead. These bead tools compliment our previously published protocol for testing spectral imaging systems that used an inexpensive multi-ion discharge lamp (MIDL) that contains Hg(+), Ar(+), and inorganic fluorophores that emits distinct, stable spectral features. RESULTS: We acquired the spectra of the FocalCheck beads on a Zeiss 510 Meta, a Leica TCS-SP1, a Leica SP2 AOBS, an Olympus FV 1000, and a Nikon C1Si confocal systems and a PARISS microscopic spectral system and of the europium beads on the Leica TCS-SP1 and PARISS spectral imaging systems. A lack of performance with some equipment between 650 and 750 nm was identified using the far red pair of the FocalCheck beads. The position of the slider in front of PMT 2 that reflects light into PMT 1 and PMT 3 affected the measurement of all bead intensities. Unmixing algorithms were used to separate beads with different fluorochromes and separate two fluorochromes on the same bead. CONCLUSIONS: The FocalCheck multi-spectral beads yielded similar profiles on four CSI systems and a PARISS spectral system. The utilization of the spectral FocalCheck beads is helpful to evaluate proper spectral performance, especially in the far red region. Europium beads provide a very narrow spectrum that can help to identify machines that have spectral problems. The dyes located on individual beads or mixed together in ring-core configuration can be used as test particles to demonstrate spectral unmixing with various algorithms.     

Comparison between line and surface mesh models to represent the rotator cuff muscle geometry in musculoskeletal models

Accurate muscle geometry (muscle length and moment arm) is required to estimate muscle function when using musculoskeletal modelling. In shoulder, muscles are often modelled as a collection of independent line segments, leading to non-physiological muscles trajectory, especially for the rotator cuff muscles. To prevent this, a surface mesh model was developed and validated against 7 MRI positions in one participant. Mean moment arm errors was 11.4% for the line vs. 8.8% for the mesh model. While the model with independent lines led to some non-physiological trajectories, the mesh model gave lower misestimations of muscle lengths and moment arms.     

Radiography used to measure internal spinal cord deformation in an in vivo rat model

Little is known about the internal mechanics of the in vivo spinal cord during injury. The objective of this study was to develop a method of tracking internal and surface deformation of in vivo rat spinal cord during compression using radiography. Since neural tissue is radio-translucent, radio-opaque markers were injected into the spinal cord.Two tantalum beads (260 µm) were injected into the cord (dorsal and ventral) at C5 of nine anesthetized rats. Four beads were glued to the lateral surface of the cord, caudal and cranial to the injection site. A compression plate was displaced 0.5 mm, 2 mm, and 3 mm into the spinal cord and lateral X-ray images were taken before, during, and after each compression for measuring bead displacements. Potential bead migration was monitored for by comparing displacements of the internal and glued surface beads.Dorsal beads moved significantly more than ventral beads with a range in averages of 0.57–0.71 mm and 0.31–0.35 mm respectively. Bead displacements during 0.5 mm compressions were significantly lower than 2 mm and 3 mm compressions. There was no statistically significant migration of the internal beads.The results indicate the merit of this technique for measuring in vivo spinal cord deformation. The pattern of bead displacements illustrates the complex internal and surface deformations of the spinal cord during transverse compression. This information is needed for validating physical and finite element spinal cord surrogates and to define relationships between loading parameters, internal cord deformation, and biological and functional outcomes.     

Investigation of 3D glenohumeral displacements from 3D reconstruction using biplane X-ray images: Accuracy and reproducibility of the technique and preliminary analysis in rotator cuff tear patients

Rotator cuff (RC) tears may be associated with increased glenohumeral instability; however, this instability is difficult to quantify using currently available diagnostic tools. Recently, the three-dimensional (3D) reconstruction and registration method of the scapula and humeral head, based on sequences of low-dose biplane X-ray images, has been proposed for glenohumeral displacement assessment. This research aimed to evaluate the accuracy and reproducibility of this technique and to investigate its potential with a preliminary application comparing RC tear patients and asymptomatic volunteers. Accuracy was assessed using CT scan model registration on biplane X-ray images for five cadaveric shoulder specimens and showed differences ranging from 0.6 to 1.4 mm depending on the direction of interest. Intra- and interobserver reproducibility was assessed through two operators who repeated the reconstruction of five subjects three times, allowing defining 95% confidence interval ranging from ±1.8 to ±3.6 mm. Intraclass correlation coefficient varied between 0.84 and 0.98. Comparison between RC tear patients and asymptomatic volunteers showed differences of glenohumeral displacements, especially in the superoinferior direction when shoulder was abducted at 20° and 45°. This study thus assessed the accuracy of the low-dose 3D biplane X-ray reconstruction technique for glenohumeral displacement assessment and showed potential in biomechanical and clinical research.     

Biological effects and adaptive response from single and repeated computed tomography scans in reticulocytes and bone marrow of C57BL/6 mice

This study investigated the biological effects and adaptive responses induced by single and repeated in vivo computed tomography (CT) scans. We postulated that, through the induction of low-level oxidative stress, repeated low-dose CT scans (20 mGy, 2 days/week, 10 weeks) could protect mice (C57BL/6) from acute effects of high-dose radiation (1 Gy, 2 Gy). The micronucleated reticulocyte (MN-RET) count increased linearly after exposure to single CT scans of doses ranging from 20 to 80 mGy (P = 0.033). Ten weeks of repeated CT scans (total dose 400 mGy) produced a slight reduction in spontaneous MN-RET levels relative to levels in sham CT-scanned mice (P = 0.04). Decreases of nearly 10% in γ-H2AX fluorescence levels were observed in the repeated CT-scanned mice after an in vitro challenge dose of 1 Gy (P = 0.017) and 2 Gy (P = 0.026). Spontaneous apoptosis levels (caspase 3 and 7 activation) were also significantly lower in the repeated CT-scanned mice than the sham CT-scanned mice (P < 0.01). In contrast, mice receiving only a single CT scan showed a 19% elevation in apoptosis (P < 0.02) and a 10% increase in γ-H2AX fluorescence levels after a 2-Gy challenge (P < 0.05) relative to sham CT controls. Overall, repeated CT scans seemed to confer resistance to larger doses in mice, whereas mice exposed to single CT scans exhibited transient genotoxicity, enhanced apoptosis, and characteristics of radiation sensitization.     

Measuring dynamic in-vivo glenohumeral joint kinematics: technique and preliminary results

Rotator cuff tears are a common injury that affect a significant percentage of the population over age 60. Although it is widely believed that the rotator cuff's primary function is to stabilize the humerus against the glenoid during shoulder motion, accurately measuring the three-dimensional (3D) motion of the shoulder's glenohumeral joint under in-vivo conditions has been a challenging endeavor. In particular, conventional motion measurement techniques have frequently been limited to static or two-dimensional (2D) analyses, and have suffered from limited or unknown in-vivo accuracy. We have recently developed and validated a new model-based tracking technique that is capable of accurately measuring the 3D position and orientation of the scapula and humerus from biplane X-ray images. Herein we demonstrate the in-vivo application of this technique for accurately measuring glenohumeral joint translations during shoulder motion in the repaired and contralateral shoulders of patients following rotator cuff repair. Five male subjects were tested at 3-4 months following arthroscopic rotator cuff repair. Superior-inferior humeral translation was measured during elevation, and anterior-posterior humeral translation was measured during external rotation in both the repaired and contralateral shoulders. The data failed to detect statistically significant differences between the repaired and contralateral shoulders in superior-inferior translation (p=0.74) or anterior-posterior translation (p=0.77). The measurement technique overcomes the limitations of conventional motion measurement techniques by providing accurate, 3D, in-vivo measures of glenohumeral joint motion during dynamic activities. On-going research is using this technique to assess the effects of conservative and surgical treatment of rotator cuff tears.     

Suprascapular nerve block results in a compensatory increase in deltoid muscle activity

A balance exists between the deltoid and rotator cuff contribution to arm elevation. Both cadaver and computer models have predicted an increase in deltoid muscle force with dysfunction of the rotator cuff. The goal of the present study was to verify this phenomenon in vivo by examining the effects of paralysis of the supraspinatus and infraspinatus muscles with a suprascapular nerve block on the electrical activity of seven shoulder muscles. Electromyographic data were collected before and after the administration of the block. The block resulted in a significant increase in muscle activity for all heads of the deltoid, with a higher percentage increase noted at lower elevation angles. Although the deltoid activity was reduced as the subjects recovered from the block, even low levels of cuff dysfunction were found to result in increased deltoid activity. These results suggest that even small disruptions in the normal function of some rotator cuff muscles (e.g., due to fatigue or impingement syndrome), may result in an increase in deltoid activity. It is possible that such compensation may result in higher superior loads at the glenohumeral joint, possibly increasing the risk of tendon damage.     

Predicting Rotator Cuff Tears Using Data Mining and Bayesian Likelihood Ratios

Objectives

Rotator cuff tear is a common cause of shoulder diseases. Correct diagnosis of rotator cuff tears can save patients from further invasive, costly and painful tests. This study used predictive data mining and Bayesian theory to improve the accuracy of diagnosing rotator cuff tears by clinical examination alone.

Methods

In this retrospective study, 169 patients who had a preliminary diagnosis of rotator cuff tear on the basis of clinical evaluation followed by confirmatory MRI between 2007 and 2011 were identified. MRI was used as a reference standard to classify rotator cuff tears. The predictor variable was the clinical assessment results, which consisted of 16 attributes. This study employed 2 data mining methods (ANN and the decision tree) and a statistical method (logistic regression) to classify the rotator cuff diagnosis into “tear” and “no tear” groups. Likelihood ratio and Bayesian theory were applied to estimate the probability of rotator cuff tears based on the results of the prediction models.

Results

Our proposed data mining procedures outperformed the classic statistical method. The correction rate, sensitivity, specificity and area under the ROC curve of predicting a rotator cuff tear were statistical better in the ANN and decision tree models compared to logistic regression. Based on likelihood ratios derived from our prediction models, Fagan''s nomogram could be constructed to assess the probability of a patient who has a rotator cuff tear using a pretest probability and a prediction result (tear or no tear).

Conclusions

Our predictive data mining models, combined with likelihood ratios and Bayesian theory, appear to be good tools to classify rotator cuff tears as well as determine the probability of the presence of the disease to enhance diagnostic decision making for rotator cuff tears.     

Transport limitation of chlorine disinfection of Pseudomonas aeruginosa entrapped in alginate beads

An artificial biofilm system consisting of Pseudomonas aeruginosa entrapped in alginate and agarose beads was used to demonstrate transport limitation of the rate of disinfection of entrapped bacteria by chlorine. Alginate gel beads with or without entrapped bacteria consumed chlorine. The specific rate of chlorine consumption increased with increasing cell loading in the gel beads and decreased with increasing bead radius. The value of an observable modulus comparing the rates of reaction and diffusion ranged from less than 0.1 to 8 depending on the bead radius and cell density. The observable modulus was largest for large (3-mm-diameter) beads with high cell loading (1.8 x 10(9) cfu/cm(3)) and smallest for small beads (0.5 mm diameter) with no cells added. A chlorine microelectrode was used to measure chlorine concentration profiles in agarose beads (3.0 mm diameter). Chlorine fully penetrated cell-free agarose beads rapidly; the concentration of chlorine at the bead center reached 50% of the bulk concentration within approximately 10 min after immersion in chlorine solution. When alginate and bacteria were incorporated into an agarose bead, pronounced chlorine concentration gradients persisted within the gel bead. Chlorine did gradually penetrate the bead, but at a greatly retarded rate; the time to reach 50% of the bulk concentration at the bead center was approximately 46 h. The overall rate of disinfection of entrapped bacteria was strongly dependent on cell density and bead radius. Small beads with low initial cell loading (0.5 mm diameter, 1.1 x 10(7) cfu/cm(3)) experienced rapid killing; viable cells could not be detected (<1.6 x 10(5) cfu/cm(3)) after 15 min of treatment in 2.5 mg/L chlorine. In contrast, the number of viable cells in larger beads with a higher initial cell density (3.0 mm diameter, 2.2 x 10(9) cfu/cm(3)) decreased only about 20% after 6 h of treatment in the same solution. Spatially nonuniform killing of bacteria within the beads was demonstrated by measuring the transient release of viable cells during dissolution of the beads. Bacteria were killed preferentially near the bead surface. Experimental results were consistent with transport limitation of the penetration of chlorine into the artificial biofilm arising from a reaction-diffusion interaction. The methods reported here provide tools for diagnosing the mechanism of biofilm resistance to reactive antimicrobial agents in such applications as the treatment of drinking and cooling waters. (c) 1996 John Wiley & Sons, Inc.     

Sub-regional activation of supraspinatus and infraspinatus muscles during activities of daily living is task dependent

The supraspinatus and infraspinatus muscles each have multiple sub-regions that may activate differentially in activities of daily living. Awareness of these differential demands critically informs rehabilitation of rotator cuff muscle following injury, particularly if centered on recovering and strengthening the rotator cuff to perform daily tasks. This study quantified muscle activation of supraspinatus and infraspinatus sub-regions during the performance of six activities of daily living. Twenty-three participants (mean: 22.6 ± 2.6 years) completed the following tasks: opening a jar, reaching at shoulder height, overhead reaching, pouring water from a pitcher, eating with a spoon, and combing hair. Indwelling electromyography was collected from the anterior and posterior supraspinatus and superior, middle, and inferior infraspinatus. Tasks requiring high arm elevations (e.g. reaching at shoulder and overhead height) activated anterior supraspinatus between 21 and 28% MVC. The posterior supraspinatus consistently activated between 10 and 30% MVC across all tasks. All sub-regions of infraspinatus activated highly (between 18 and 25% MVC) in tasks requiring high arm elevations in flexion. These findings may be leveraged to define effective measures to increase rotator cuff function in daily tasks.     

Responses of temporal retinal growth cones to ephrinA5-coated beads

The topographic positioning of retinal axons in the optic tectum is regulated, at least in part, by ephrinA/EphA repulsive interactions. Temporal axons, expressing high levels of EphA receptors, project to the ephrinA5-poor anterior tectum and avoid the ephrinA5-rich posterior tectum. To examine the dynamic behavior of temporal growth cones when they first encounter ephrinA, we manipulated ephrinA-coated beads with a laser tweezer into desired positions around the growth cones of chick retinal axons in culture. At high concentrations of ephrinA5 on the beads, growth cones typically collapsed on contacting the bead. At low concentrations, however, growth cones showed heterogeneous responses with some growth cones showing repulsive turning and others showing attractive turning after contacting the bead. Experiments with two beads indicate that retinal axons integrate guidance information that is provided simultaneously at two discrete locations. When a time-delay was introduced between exposure to the first and the second bead, individual axons exhibited a stereotyped response to the repeated stimuli, either responding with attraction followed by attraction, or showing repulsion followed by repulsion or collapse. Our results suggest the existence of at least two retinal subpopulations from the temporal retina, one being attracted, another being repelled by low levels of ephrinA5. These findings demonstrate that temporal retinal axons are not universally repelled by ephrinA5 and suggest that their ability to respond differentially to low concentrations may help them to map in a continuous manner over the surface of the anterior tectum.