Experimental studies on the effect of Gyrodactylus colemanensis and G. salmonis (Monogenea) on density of mucous cells in the epidermis of fry of Oncorhynchus mykiss

Fry of Oncorliynclius mykiss were experimentally infected with the ectoparasites Gyroducrylus rolenirmensis and Gyroducrylus salnionis (Monogenea) and changes in mucous cell density in the epidermis covering the caudal fin were monitored during an ensuing 42 day epidemic. At 10° C, infections of G. colemanensis rose to a recorded peak of 90 to 1 15 worms on day 27 post-infection and then declined toward extinction. Intensity of G. salmonis remained low throughout the experiment. Infection produced no clinical signs of disease and did not influence fry growth or survival. However, infected fish did have a 50% reduction in the number of mucous cells in the epidermis of the fin. The changes were first detected on day 24 post-infection and became increasingly pronounced during the subsequent 1 day period when parasite numbers declined drastically. The study hypothesizes that parasite activity on the surface indirectly leads to reduction in mucous cells through disruption of cell dynamics within the epidermis.     

Effect of an Artificial Caudal Fin on the Performance of a Biomimetic Fish Robot Propelled by Piezoelectric Actuators

This paper addresses the design of a biomimetic fish robot actuated by piezoeeramic actuators and the effect of artificial caudal fins on the fish robot＇s performance. The limited bending displacement produced by a lightweight piezocomposite actuator was amplified and transformed into a large tail beat motion by means of a linkage system. Caudal fins that mimic the shape of a mackerel fin were fabricated for the purpose of examining the effect of caudal fm characteristics on thrust production at an operating frequency range. The thickness distribution of a real mackerel＇s fin was measured and used to design artificial caudal fins. The thrust performance of the biomimetic fish robot propelled by fins of various thicknesses was examined in terms of the Strouhal number, the Froude number, the Reynolds number, and the power consumption. For the same fm area and aspect ratio, an artificial caudal fin with a distributed thickness shows the best forward speed and the least power consumption.     

Asterropteryx atripes, a new gobiid fish from the Western Pacific Ocean (Perciformes: Gobioidei)

 A new gobiid fish, Asterropteryx atripes, is described on the basis of eight specimens from Iriomote-jima Island, Ryukyu Islands, and El Nido, Philippines. It differs from its congeners by having the following combination of characters: 3rd spine of first dorsal fin long, filamentous, distal tip usually over end of 2nd dorsal fin base when appressed in both sexes; pelvic fins almost separated, innermost (=5th) segmented rays connected by rudimentary low membrane between bases, and no frenum; 4–7 short spines on posterior margin of preopercle (the uppermost spine usually just behind the cephalic sensory canal pore N); eye large, 32.3–35.8% of head length; enlarged haemal arches on 1st two caudal vertebrae; a distinct black band from posterior margin of eye to caudal fin base (indistinct in dark-phase individuals); black pelvic fin (vivid in dark-phase individuals); numerous minute bright blue spots on head and body in life; no distinct dark spots on head and body; iris entirely reddish-brown or dusky (bright white ventrally in pale-phase individuals) when alive or fresh, and entirely black in preservation, without white transverse bar on middorsal surface; hovering habit. The new species appears to be most closely related with the other only known hovering species, A. striata; the latter is readily distinguished from the former in having no long, filamentous dorsal spine; semitranslucent pelvic fin; and a series of small black spots along dorsal fin base and dorsal edge of caudal peduncle. Asterropteryx contains two distinct groups, and the monophyly of the genus is open to question. Received: March 19, 2000 / Revised: February 25, 2002 / Accepted: April 25, 2002     

Mapping QTL for an Adaptive Trait: The Length of Caudal Fin in <Emphasis Type="Italic">Lates calcarifer</Emphasis>

The caudal fin represents a fundamental design feature of fishes and plays an important role in locomotor dynamics in fishes. The shape of caudal is an important parameter in traditional systematics. However, little is known about genes involved in the development of different forms of caudal fins. This study was conducted to identify and map quantitative trait loci (QTL) affecting the length of caudal fin and the ratio between tail length and standard body length in Asian seabass (Lates calcarifer). One F1 family containing 380 offspring was generated by crossing two unrelated individuals. One hundred and seventeen microsatellites almost evenly distributed along the whole genome were genotyped. Length of caudal fin at 90 days post-hatch was measured. QTL analysis detected six significant (genome-wide significant) and two suggestive (linkage-group-wide significant) QTL on seven linkage groups. The six significant QTL explained 5.5–16.6% of the phenotypic variance, suggesting these traits were controlled by multiple genes. Comparative genomics analysis identified several potential candidate genes for the length of caudal fin. The QTL for the length of caudal fin detected for the first time in marine fish may provide a starting point for the future identification of genes involved in the development of different forms of caudal fins in fishes.     

Correlated evolution of body and fin morphology in the cichlid fishes

Body and fin shapes are chief determinants of swimming performance in fishes. Different configurations of body and fin shapes can suit different locomotor specializations. The success of any configuration is dependent upon the hydrodynamic interactions between body and fins. Despite the importance of body–fin interactions for swimming, there are few data indicating whether body and fin configurations evolve in concert, or whether these structures vary independently. The cichlid fishes are a diverse family whose well‐studied phylogenetic relationships make them ideal for the study of macroevolution of ecomorphology. This study measured body, and caudal and median fin morphology from radiographs of 131 cichlid genera, using morphometrics and phylogenetic comparative methods to determine whether these traits exhibit correlated evolution. Partial least squares canonical analysis revealed that body, caudal fin, dorsal fin, and anal fin shapes all exhibited strong correlated evolution consistent with locomotor ecomorphology. Major patterns included the evolution of deep body profiles with long fins, suggestive of maneuvering specialization; and the evolution of narrow, elongate caudal peduncles with concave tails, a combination that characterizes economical cruisers. These results demonstrate that body shape evolution does not occur independently of other traits, but among a suite of other morphological changes that augment locomotor specialization.     

A new blind loach, <Emphasis Type="Italic">Oreonectes elongatus</Emphasis> sp. nov. (Cypriniformes: Balitoridae) from Guangxi,China

A new loach, Oreonectes elongatus sp. nov. is described based on collections from Mulun Township, Huanjiang County, Guangxi in China. It is distinguished from its congeners by the combination of the following characters: most elongate body (body depth/SL 8.62–10.68%), blind, a forked caudal fin, obvious adipose dorsal crest and ventral crest; entire body naked and de-pigmented. Although the new species has a similar distribution with O. macrolepis, it can be distinguished by scales (absent in O. elongatus vs. present in O. macrolepis), shape of snout (elongate vs. round), the opposite position of the dorsal and pelvic fins origins (behind vs. front). The new species shares the same possession of dorsal and ventral crests, a forked caudal fin, eyeless, naked body and incomplete lateral line with O. translucens, but can be distinguished from the latter by caudal fin crest (more developed and translucent in O. translucens), longer anterior nostril tube and barbel, extreme of pectoral fin reaching 2/3 of the distance between origin of pectoral and pelvic fins, more vertebrae (4 + 38–39 vs. 4 + 32).     

广西高原鳅属鱼类一穴居新种记述

2003年1月,在广西壮族自治区天峨县红水河水系地下河采集到一批盲鱼标本。经鉴定,为高原鳅属Triplophysa一未经发表的新种。新种天峨高原鳅Triplophysa tianeensis sp．nov．与个旧盲高原鳅T．gejiuensis、石林盲高原鳅T．shilinensis、阿庐高原鳅T．aluensis和南丹高原鳅T．nandanensis相似;本新种腹鳍末端不达肛门,尾鳍分枝鳍条16,可进一步与个旧盲高原鳅和石林盲高原鳅(腹鳍末端达到肛门,尾鳍分枝鳍条14-15)相区别;本新种背鳍起点位于体之中点、腹鳍起点之后,肛门紧靠臀鳍起点,可进一步与阿庐高原鳅(背鳍起点靠近吻端、位于腹鳍起点之前,肛门距臀鳍起点仍有一段距离)相区别。本新种与同分布于红水河水系的南丹高原鳅Triplophysa nandanensis Lan et al.较为相似;但二者区别明显：新种背鳍分枝鳍条7、胸鳍分枝鳍条9、腹鳍分枝鳍条6、背鳍外缘平截、背鳍起点位于腹鳍起点之后,后者背鳍分枝鳍条8、胸鳍分枝鳍条10～11、腹鳍分枝鳍条7、背鳍外缘凹入、背鳍起点位于腹鳍起点之前;此外,新种的穴居特征更为显著：眼极度退化、头长为眼径16．8—32．8(25．0)倍、部分个体无色素斑且各鳍无斑点,而南丹高原鳅眼小、头长为眼径4．7～9．0(7．5)倍、体和头背侧密布云状斑且各鳍均具点状斑。     

记比耶鱼(Birgeria)在中国的首次发现

记述了采自云南罗平晚三叠世法郎组竹杆坡段的比耶鱼一新种──刘氏比耶鱼（Ｂｉｒｇｅｒｉａ ｌｉｕｉ ｓｐ． ｎｏｖ．）,这是比耶鱼化石在中国的首次发现。刘氏比耶鱼与产自瑞士圣乔治山中三叠世边境沥青层的史氏比耶鱼最为相近,两者仅在尾柄长高之比、尾鳍长短与上下叶外缘交角、背鳍和臀鳍辐状支鳍骨的数目、臀鳍辐状骨骨板的大小、以及侧线管骨化与否等特征上略有差异。比耶鱼与软骨硬鳞鱼超目的鲟形目最为接近,两者共有一系列特征,如除尾上叶外体侧裸露,副蝶骨末端伸达头后,鳃盖骨退化;但比耶鱼同时也具有不少的特有特征,代表了软骨硬鳞鱼超目的另一类群──比耶鱼目（Ｂｉｒｇｅｒｉｉｆｏｒｍｅｓ　ｏｒｄ． ｎｏｖ．）。刘氏比耶鱼的发现进一步表明华南扬子区中、晚三叠世鱼类化石与特提斯西部的鱼群具有密切的动物地理关系。     

颈斑尖猪鱼——中国南海隆头鱼科新纪录种

本文根据采自海南岛的标本描述了中国南海一新记录种:颈斑尖猪鱼(Leptojulis lambdastigma)。本种的主要形态特征为:体长形,体长为体高的3.7~4.0倍,为头长的3.1~3.6倍;头长为吻长的2.7~3.3倍,为胸鳍长的1.45~1.65倍;头裸露无鳞;两颌前端各具2对大犬齿,外侧1对犬齿弯向外后方;背鳍Ⅸ-12,臀鳍Ⅲ-12,胸鳍i(不分支)+11-12(分支);侧线完整,侧线鳞27;颈部具一个"V"形大黑斑,胸鳍后部的上方、侧线的下方具一小黑斑。新鲜标本头部具2条黄色纵带,沿体侧分别经眼和胸鳍基部向后达尾鳍基部;体侧背部具1条浅棕黄色条带;胸鳍基部棕红色,后部浅色;臀鳍浅蓝色;尾鳍下部淡蓝色,上部橙色。本种与尾斑尖猪鱼(L.urostigma)形态较为相似,主要差别在于颈斑尖猪鱼的颈部具有一显著的"V"形黑斑,尾鳍基部无黑斑(尾斑尖猪鱼具此黑斑)。     

中国隆头鱼科一新纪录种——雀尖嘴鱼

尖嘴鱼属(Gomphosus)是一群分布于印度洋和太平洋热带珊瑚礁海域鱼类,共有2种,以往在中国海域记录有1种杂色尖嘴鱼(G.varius)。我们在分析20世纪90年代采自中国南海大陆坡的鱼类标本时,发现了该属的另一种雀尖嘴鱼(Gomphosus caeruleus Lacepède,1801),为中国新纪录种。本种的主要鉴别特征为:体呈浅黄褐色(雌)或深黑色(雄);吻部特别延长呈管状;体长为体高的4.2倍,为头长的2.6倍;背鳍Ⅷ-13,臀鳍Ⅲ-11,胸鳍i(不分支)+14(分支);脊椎骨25;鳃盖条7;体被中大圆鳞;侧线完全,在背鳍条的后部下方急剧向下弯折,侧线有孔鳞片27;头部仅鳃盖上部有9枚呈三角状排列的小鳞;背鳍起点前方有鳞8行;背鳍第一至第三鳍棘间的鳍膜具1黑斑;尾鳍截形。     

A new approach to quantifying morphological variation in bluegill Lepomis macrochirus

Bluegill Lepomis macrochirus showed intraspecific morphological and behavioural differences dependent on the environment. Pelagic L. macrochirus had more fusiform bodies, a higher pectoral fin aspect ratio, a larger spiny dorsal fin area and pectoral fins located farther from the centre of mass than littoral L. macrochirus (P < 0·05). The shape of the body and pectoral fins, in particular, were suggestive of adaptation for sustained high-speed and economical labriform swimming. Littoral L. macrochirus had a deeper and wider body, deeper caudal fins and wider mouths than pelagic L. macrochirus (P < 0·05). Additionally, the soft dorsal, pelvic, anal and caudal fins of littoral L. macrochirus were positioned farther from the centre of mass (P < 0·05). The size and placement of these fins suggested that they will be effective in creating turning moments to facilitate manoeuvring in the macrophyte-dense littoral habitat.     

薄鳞鱼类化石的新发现及其地层意义

本文记述了薄鳞鱼类(leptolepids)一新属新种——罗家峡隆德鱼(Longdeichthys luojiaxiaensis gen.et sp.nov.)。它和广泛分布于我国北方的另一原始真骨鱼类狼鳍鱼(Lycoptera)共生。因而,为研究真骨鱼类的演化和确定我国北方中生代含鱼岩系的时代及地层对比上,提供了新的资料。     

中国NFDA2亚科金线NFDA2属鱼类一新种及其生态和适应(鲤形目：鲤科)

1999年11月在广西都安县下坳乡一岩洞地下水中采到1尾鱼类标本,经鉴定为金线NFDA2属一新种。新种与大鳞金线NFDA2S. macrolepis和陆良金线NFDA2S. macroscalus相近。但新种在背腹鳍相对位置以及背鳍末根不分枝鳍条后缘具锯齿等方面与上述两种存在明显差异;特别是该新种仅局限分布于洞穴中,就其生境来说也与上述两种更为不同。此外,新种头长与吻长和头长与眼径的比例是目前该属内已知最小的,眼明显偏大,反映出其对弱光生境条件的适应。     

Hastatobythites arafurensis, a new bythitid genus and species from Australia (Bythitidae, Ophidiiformes)

A new genus and species of the subfamily Bythitinae (Bythitidae),Hastatobythites arafurensis, is described on the basis of two specimens from the Arafura Sea. The genus is unique in the subfamily in having two anteriorlydirected spines, one on the frontal and one on the mesethmoid. It is also distinguishable from all other genera in the subfamily by the following combination of characters: head scales absent; squamation on body incomplete; maxillary expanded posteriorly; no thin pore-bearing skin flap over opercle; opercle thin, weak, without distinct spine; jaw teeth conical; vomerine and palatine teeth present; developed gill rakers on 1 st arch 3; pelvic fins with 1 ray in each; pectoral peduncle elongated, with 16 rays; caudal fin rays 12; branchiostegal, rays 8; precaudal vertebrae 15, with tips of 6th to 12th neural spines truncated.     

Morphological scaling of body form in four shark species differing in ecology and life history

Body form can change across ontogeny, and can influence how animals of different sizes move and feed. Scaling data on live apex predatory sharks are rare and, therefore, we examined patterns of scaling in ontogenetic series of four sympatric shark species exhibiting a range of sizes, ecologies and life histories (tiger, bull, blacktip, and nurse shark). We evaluated 13 linear morphological variables and two areas (caudal and dorsal) that could influence both animal condition and locomotor performance. These measurements included dimensions of the dorsal, pectoral, and caudal fins, as well as several dimensions of body circumference, and of the head. For all four species, the body axis (eye‐to‐eye, lateral span, frontal span, proximal span) scaled close to isometry (expected slope of 1.0). The two largest sharks (tiger and bull sharks) also showed significant negative allometry for elements of the caudal fin. We found significant negative allometry in the lengths of the upper lobe of the caudal fin (caudal fin 1) and the overall height of the caudal fin (caudal fin 2) in tiger and bull sharks, with slopes ranging from about 0.60 to 0.73. Further, tiger sharks showed negative allometry in caudal fin area. These results suggest that in terms of overall body dimensions, small sharks are roughly geometrically similar to large sharks, at least within the species we examined. However, juvenile tiger (and to a lesser extent bull sharks) are notable in having proportionately larger caudal fins compared to adult sharks. As the caudal fin contributes to generating thrust during forward locomotion, this scaling implies differences among adult and juvenile sharks in locomotor ability. © 2014 The Linnean Society of London, Biological Journal of the Linnean Society, 2014, 114 , 126–135.     

Development of eggs,larvae and juveniles of the puffer,Takifugu chrysops,reared in the laboratory

The artificial fertilization of the puffer,Takifugu chrysops (Hilgendorf), was carried out at Sajima in Yokosuka City on May 22, 1984. Hatched larvae were reared for a period of about 150 days. The spawning period seems to extend from mid to late May in the eastern part of Sagami Bay. The eggs were spherical, pale milky white and semitransparent, demersal and adhesive in nature, measuring 1.32±0.04 mm in diamter, and with a cluster of small oil-globules. The incubation period was about 162 hours at a water temperature of 17.4 to 21.8°C. During embryonic development, the only pigment cells that appeared on the embryo were the black chromatophores. The newly hatched larvae measured from 2.72 to 3.06 mm TL, averaging 2.87±0.1 mm TL, and 22–23 (9 + 13?14) myomeres. At yolk absorption, 4 days after hatching, the larvae attained 3.64–3.79 mm TL. On the 11th day, postlarvae averaged 4.69±0.24 mm TL. Larval finfolds disappeared and rudimental dorsal, anal and caudal fins were formed. There were two large clusters of melanophores, one on the back, exteding from the mid-base of the dorsal fin to the caudal peduncle region, the other along the anal fin base. The color of the body began to turn pale green to brownish-orange and spinelike scales appeared on the belly. Eighteen days after hatching (7.02±0.27 mm TL), the caudal notochord began to turn up and a “constriction” appeared on the posterior margin of the caudal fin membrane. This notch moved upwards as the notochord upturning advances. The larvae attained full fin ray counts and reached the juvenile stage at 9.1-9.5 mm TL, 24 days after hatching. Characteristic black blotches on the back and specific brownish orange body color appeared at the stage of 20 mm TL, 24 days after hatching. The growth during the larval stage and early juvenile stage (24 to 51 days after hatching) were expressed by the following equations, wherey is total length (mm) andx is days after hatching.y ₁=2.8424× 1.0509⁹ (0≦x≦24)y ₂ = 3.7872×1.0372^x (24≦x≦51)     

A new species of Petroleuciscus (Teleostei: Cyprinidae) from the Büyük Menderes River,southwestern Anatolia,Turkey

Petroleuciscus ninae sp. nov. is described from the Büyük Menderes River drainage. The new species is distinguished by having a black lateral stripe from head to base of caudal fin, stripe distinct anteriorly and posteriorly, wider than eye diameter; numerous black pigments on anal‐fin rays; body depth at dorsal‐fin origin 27–30% standard length (L_S); head width at posterior margin of eye 16–19% L_S; and eye diameter smaller than snout length. Petroleuciscus ninae is also distinguished from other species in adjacent waters by having six fixed diagnostic nucleotide substitutions in the mitochondrial DNA coI barcode region.     

A new species of Astyanax Baird & Girard (Characiformes: Characidae) from the Rio Paraguaçu basin,Chapada Diamantina,Bahia, Brazil,with comments on bony hooks on all fins

A new species of Astyanax from the Rio Paraguaçu basin, Bahia, Brazil, is described. This new species is distinguished from its congeners known to occur in Brazilian drainages by the presence of small bony hooks on all fins of mature males. Furthermore, the new species can be diagnosed by its colour pattern, which consists of a unique vertically elongated humeral blotch, a conspicuous dark drop‐shaped horizontal blotch over the caudal peduncle, tapering anteriorly and not extending to the median caudal‐fin rays, and by the absence of a conspicuous broad dark midlateral stripe. The new species differs further by having the greatest body depth just anterior to the dorsal‐fin origin, 32–35 perforated scales in the lateral line and a reduced number of branched anal‐fin rays (16–20). Apparently, the new species does not fit into any species complex of Astyanax. The occurrence of bony hooks on all fins of Astyanax is discussed.     

Leis' conundrum: homology of the clavus of the ocean sunfishes. 2. Ontogeny of the median fins and axial skeleton of Ranzania laevis (Teleostei, Tetraodontiformes, Molidae)

One of the most conspicuous characters of the ocean sunfishes, family Molidae, is the punctuation of the body by a deep, abbreviated, caudal fin-like structure extending vertically between the posterior ends of the dorsal and anal fins, termed the clavus by Fraser Brunner. Homology of the clavus has been a matter of debate since the first studies on molid anatomy in the early 1800s. Two hypotheses have been proposed: 1) It is a highly modified caudal fin; 2) It is formed by highly modified elements of the dorsal and anal fins. To resolve this homology issue, we studied the ontogeny of the molid vertebral column and median fins and compared it to that of a less morphologically derived gymnodont (see Part 1 of this study), a member of the family Tetraodontidae. We show that in molids the chorda never flexes during development, that the claval rays form from the posterior ends of the dorsal and anal fins toward the middle, thus closing the gap inward, and that elements of the molid clavus have an identical development and composition as the proximal-middle and distal radials of the regular dorsal and anal fins. We thus conclude that the molid clavus is unequivocally formed by modified elements of the dorsal and anal fin and that the caudal fin is lost in molids.