Laccase immobilization on mesostructured cellular foams affords preparations with ultra high activity

Extracellular laccase produced by the wood-rotting fungus Cerrena unicolor was immobilized covalently on the mesostructured siliceous cellular foams (MCFs) functionalised using various organosilanes with amine and glycidyl groups. The experiments indicated that laccase bound via glutaraldehyde to MCFs modified using 2-aminoethyl-3-aminopropyltrimethoxysilane remains very active. In the best biocatalyst activity was about 42,700 U mL^?1 carrier (66,800 U mg^?1 bound protein), and hence significantly higher than ever reported before. Optimisation of the immobilization procedure with respect to protein concentration, pH of coupling mixture and the enzyme purity afforded the biocatalyst with activity of about 90,980 U mL^?1. For the best preparation, thermal- and pH-stability, and activity profiles were determined. Experiments carried out in a batch reactor showed that k_cat/K_m for immobilized enzyme (0.88 min^?1 μM^?1) was acceptable lower than the value obtained for the native enzyme (2.19 min^?1 μM^?1). Finally, potentials of the catalysts were tested in the decolourisation of indigo carmine without redox-mediators. Seven consecutive runs with the catalysts separated by microfiltration proved that adsorption of the dye onto the carrier and enzymatic oxidation contribute to the efficient decolourisation without loss of immobilized enzyme activity.     

Comparative studies on immobilized laccase behaviour in packed-bed and batch reactors

Extracellular laccase produced by the wood-rotting fungus Cerrena unicolor was immobilized covalently via glutaraldehyde to cellulose-based carrier Granocel. Laccase was partially purified by membrane concentration and diafiltration followed by precipitation with acetone. Five-fold increase in the measured activity of immobilized enzyme was obtained when six times purer laccase was used for immobilization. For the best preparation, with very high activity of 2053 U per 1 mL of the carrier, thermal- and pH-stability, and activity profiles were determined. Experiments carried out in a batch reactor showed that k_cat/K_m for immobilized enzyme (0.65) is three times lower than the value obtained for the native laccase (2.19) whereas k_cat/K_m estimated from continuous reactor (1.50) is notably closer to that for the native enzyme. Continuous process probably reflects more precisely kinetics of the reaction accompanied by simultaneous product precipitation on the carrier’s surface. Operational stability of immobilized laccase was tested in continuous mode operation with ABTS, guaiacol and trichlorophenol as substrates and showed that packed-bed reactor is unprofitable system for laccase immobilized on Granocel carrier due to the high bed compaction. However, excellent stability of the preparation was noted under 20 successive runs in the well mixed tank reactor and better ability towards trichlorophenol biotransformation was observed in the case of immobilized laccase.     

Laccase immobilization on the tailored cellulose-based Granocel carriers

Extracellular laccase produced by Cerrena unicolor was immobilized by adsorption or covalent bonds formation on the cellulose-based carrier Granocel. Immobilization was optimized by changing the anchor groups and the methods of activation/immobilization. On the base of measured activity and stability of immobilized preparations, the covalent method was selected. It was shown that coupling of the enzyme to the carrier via divinyl sulfone or glutaraldehyde yielded an enzyme-carrier preparation of high activity and storage stability. Further optimization of the carrier's superstructure consisted in changing pore diameters and amount of functional groups on the carriers surface. Three-fold higher activity was noted when the enzyme was immobilized on NH2-modified Granocel with the highest size exclusion limit and amino group content. Relatively low products sorption was observed on the carrier surface. The effects of protein concentration and pH-value of the coupling mixture on immobilization efficiency were evaluated also.     

Laccase immobilization on enzymatically functionalized polyamide 6,6 fibres

Polyamide matrices, such as membranes, gels and non-wovens, have been applied as supports for enzyme immobilization, although in literature the enzyme immobilization on woven nylon matrices is rarely reported. In this work, a protocol for a Trametes hirsuta laccase immobilization using woven polyamide 6,6 (nylon) was developed. A 2⁴ full factorial design was used to study the influence of pH, spacer (1,6-hexanediamine), enzyme and crosslinker concentration on the efficiency of immobilization. The factors enzyme dosage and spacer seem to have played a critical role in the immobilization of laccase onto nylon support. Under optimized working conditions (29 U mL⁻¹ of laccase, 10% of glutaraldehyde, pH = 5.5, with the presence of the spacer), the half-life time attained was about 78 h (18% higher than that of free enzyme), the protein retention was 30% and the immobilization yield was 2%. The immobilized laccase has potential for application in the continuous decolourization of textile effluents, where it can be applied into a membrane reactor.     

Amperometric biosensor based on a site-specific immobilization of acetylcholinesterase via affinity bonds on a nanostructured polymer membrane with integrated multiwall carbon nanotubes

Acetylcholinesterase (AChE) was immobilized on chemically modified poly-(acrylonitrile-methyl-methacrylate-sodium vinylsulfonate) membranes in accordance with three different methods, the first of which involved random enzyme immobilization via glutaraldehyde, the second one—site-specific enzyme immobilization via glutaraldehyde and Concanavalin A (Con A) and the third method—modified site-specific enzyme immobilization via glutaraldehyde in the presence of a mixture of multiwall carbon nanotubes and albumin (MWCNs + BSA), glutaraldehyde and Con A. Preliminary tests for the activity of immobilized AChE were carried out using these three methods. The third method was selected as the most efficient one for the immobilization of AChE and the prepared enzyme carriers were used for the construction of amperometric biosensors for the detection of acetylthiocholine (ATCh).A five level three factorial central composite design was chosen to determine the optimal conditions for the enzyme immobilization with three critical variables: concentration of enzyme, Concanavalin A and MWCNs. The design illustrated that the optimum values of the factors influencing the amperometric current were C_E: 70 U mL⁻¹; C_{Con A}: 1.5 mg mL⁻¹ and C_MWCN: 11 mg mL⁻¹, with an amperometric current 0.418 μA. The basic amperometric characteristics of the constructed biosensor were investigated. A calibration plot was obtained for a series of ATCh concentrations ranging from 5 to 400 μM. A linear interval was detected along the calibration curve from 5 to 200 μM. The correlation coefficient for this concentration range was 0.995. The biosensor sensitivity was calculated to be 0.065 μA μM⁻¹ cm⁻². The detection limit with regard to ATCh was calculated to be 0.34 μM. The potential application of the biosensor for detection and quantification of organophosphate pesticides was investigated as well. It was tested against sample solutions of Paraoxon. The biosensor detection limit was determined to be 1.39 × 10⁻¹² g L⁻¹ of Paraoxon, as well as the interval (10⁻¹¹ to 10⁻⁸ g L⁻¹) within which the biosensor response was linearly dependant on the Paraoxon concentration. Finally the storage stability of the enzyme carrier was traced for a period of 120 days. After 30-day storage the sensor retained 76% of its initial current response, after 60 days—68% and after 120 days—61%.     

Laccase mediator system for activation of agarose gel: Application for immobilization of proteins

Cross-linked Sepharose beads were treated with laccase–TEMPO system for oxidation of the primary alcohol groups on the sugar moieties. Optimal activation conditions using Trametes versicolor laccase were at pH 5 and 22 °C, giving an aldehyde content of 55 μmol g⁻¹ Sepharose with 28 units g⁻¹ of laccase and 12.5 mM TEMPO. The activated Sepharose was used for immobilization of trypsin as model protein. Highest degree of immobilization was obtained at pH 10.5 but the activity yield was only 31% of that loaded on the gel. The yield of gel bound trypsin activity was increased to 76% (corresponding to about 43 U g⁻¹ Sepharose) when the immobilization was performed in the presence of trypsin inhibitor, benzamidine. The immobilization yields were comparable to that obtained on the matrix activated using sodium periodate (containing 72 μmol aldehyde per g Sepharose). Recycling and storage of the immobilized trypsin preparations showed high stability of the enzyme bound to laccase–TEMPO activated gel.     

Heterologous production of a temperature and pH-stable laccase from Bacillus vallismortis fmb-103 in Escherichia coli and its application

To enhance laccase yield, the laccase gene from Bacillus vallismortis fmb-103 was cloned and heterologously expressed in Escherichia coli BL21 (DE3) cells. The auto-induction strategy was applied during fermentation, and the process was controlled, as follows: Cu²⁺ was added when the optical density at 600 nm (OD₆₀₀) was 0.3, the fermentation temperature was adjusted to 16 °C when the OD₆₀₀ was 0.9, and fermentation was stopped after 50 h. The yield of recombinant laccase was up to 3420 U/L, as assayed by 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid). Recombinant laccase was purified 4.47-fold by heating for 10 min at 70 °C and dialyzing against 50–60% ammonium sulfate, retained more than 50% activity after 10 h at 70 °C, and demonstrated broad pH stability. Malachite green was efficiently degraded by recombinant laccase, especially in combination with mediators. These results provided a basis for the future application of recombinant laccase to malachite green degradation.     

Optimization of the immobilization of sweet potato amylase using glutaraldehyde-agarose support. Characterization of the immobilized enzyme

A simplified procedure for the preparation of immobilized beta-amylase using non-purified extract from fresh sweet potato tubers is established in this paper, using differently activated agarose supports. Beta-amylase glutaraldehyde derivative was the preparation with best features, presenting improved temperature and pH stability and activity. The possibility of reusing the amylase was also shown, when this immobilized enzyme was fully active for five cycles of use. However, immobilization decreased enzyme activity to around 15%. This seems to be mainly due to diffusion limitations of the starch inside the pores of the biocatalyst particles. A fifteen-fold increase in the Km was noticed, while the decrease of Vmax was only 30% (10.1 U mg^?1 protein and 7.03 U mg^?1 protein for free and immobilized preparations, respectively).     

Purification and characterization of a new laccase from Shiraia sp.SUPER-H168

A new laccase from Shiraia sp.SUPER-H168 was purified by ion exchange column chromatography and gel permeation chromatography and the apparent molecular mass of this enzyme was 70.78 kDa, as determined by MALDI/TOF-MS. The optimum pH value of the purified laccase was 4, 6, 5.5 and 3 with 2,6-dimethoxyphenol (DMP), syringaldazine, guaiacol and 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as substrates, respectively. The optimum temperature of the purified laccase was 50 °C using DMP, syringaldazine and guaiacol as substrates, but 60 °C for ABTS. Inhibitors and metal ions of SDS, NaN₃, Ag⁺ and Fe³⁺ showed inhibition on enzyme activity of 10.22%, 7.86%, 8.13% and 67.50%, respectively. Fe²⁺ completely inhibited the purified laccase. The K_cat/K_m values of the purified laccase toward DMP, ABTS guaiacol and syringaldazine were 3.99 × 10⁶, 3.74 × 10⁷, 8.01 × 10⁴ and 2.35 × 10⁷ mol^?1 L S^?1, respectively. The N-terminal amino acid sequence of the purified laccase showed 36.4% similarity to Pleurotus ostrestus. Approximately 66% of the Acid Blue 129 (100 mg L^?1) was decolorized by 2.5 U of the purified laccase after a 120 min incubation at 50 °C. Acid Red 1 (20 mg L^?1) and Reactive Black 5 (50 mg L^?1) were decolorized by the purified laccase after the addition of Acid Blue 129 (100 mg L^?1).     

Purification of a thermostable laccase from Leucaena leucocephala using a copper alginate entrapment approach and the application of the laccase in dye decolorization

Laccase from a tree legume, Leucaena leucocephala, was purified to homogeneity using a quick two-step procedure: alginate bead entrapment and celite adsorption chromatography. Laccase was purified 110.6-fold with an overall recovery of 51.0% and a specific activity of 58.5 units/mg. The purified laccase was found to be a heterodimer (∼220 kDa), containing two subunits of 100 and 120 kDa. The affinity of laccase was found to be highest for catechol and lowest for hydroquinone, however, highest K_cat and K_cat/K_m were obtained for hydroquinone. Purified laccase exhibited pH and temperature optima of 7.0 and 80 °C, respectively. Mn²⁺, Cd²⁺, Fe²⁺, Cu²⁺ and Na⁺ activated laccase while Ca²⁺ treatment increased laccase activity up to 3 mM, beyond which it inhibited laccase. Co²⁺, Hg²⁺, DTT, SDS and EDTA showed an inhibition of laccase activity. The Leucaena laccase was found to be fairly tolerant to organic solvents; upon exposure for 1 h individually to 50% (v/v) each of ethanol, DMF, DMSO and benzene, more than 50% of the activity was retained, while in the presence of 50% (v/v) each of methanol, isopropanol and chloroform, a 40% residual activity was observed. The purified laccase efficiently decolorized synthetic dyes such as indigocarmine and congo red in the absence of any redox mediator.     

Characterization of a novel laccase from the isolated Coltricia perennis and its application to detoxification of biomass

A highly efficient laccase-producing fungus was isolated from soil and identified as Coltricia perennis SKU0322 by its morphology and by comparison of its internal transcribed spacer (ITS) rDNA gene sequence. Extracellular laccase (Cplac) from C. perennis was purified to homogeneity by anion-exchange and gel filtration chromatography. Cplac is a monomeric glycoprotein with 12% carbohydrate content and a molecular mass of 66 kDa determined by polyacrylamide-gel electrophoresis. Ultraviolet-visible absorption spectroscopy observed type 1 and type 3 copper signals from Cplac. The enzyme acted optimally at pH 3–4 and 75 °C. Its optimal activity was with 2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonate) (ABTS), it also oxidized various lignin-related phenols. The enzyme was characterized as a multi-copper blue laccase by its substrate specificity and internal amino acid sequence. It showed a higher catalytic efficiency towards ABTS (k_cat/K_m = 18.5 s^?1 μM^?1) and 2,6-dimethoxyphenol (k_cat/K_m = 13.9 s^?1 μM^?1) than any other reported laccase. Its high stability and catalytic efficiency suggest its suitability for industrial applications: it detoxified phenolic compounds in acid-pretreated rice straw and enhanced saccharification yield.     

Amperometric acetylthiocholine sensor based on acetylcholinesterase immobilized on nanostructured polymer membrane containing gold nanoparticles

Poly(acrylonitrile-methylmethacrylate-sodium vinylsulfonate) membranes were chemically modified and loaded with gold nanoparticles. Acetylcholinesterase was immobilized on the prepared membranes in accordance with two distinctive procedures, the first of which involved immobilization of the enzyme by convection, and the other by diffusion. The prepared enzyme carriers were used for the construction of amperometric biosensors for detection of acetylthiocholine.Two sets of experiments were carried out. The first set was designed so that to evaluate the effects of the gold nanoparticle deployment and the immobilization procedures over the biosensor effectiveness. The other set of experiments was conducted in order to determine the influence of the individual components of the enzyme mixture, containing gold nanoparticles, acetylcholinesterase, bovine serum albumin and glutaraldehyde, over the current output of the constructed acetylthiocholine biosensors. The optimum composition of the mixture was determined to be as follows: enzyme, 0.1 U ml^?1; gold nanoparticles, 0.50 ml (per 1 ml enzyme mixture); albumin, 0.5% and glutaraldehyde, 0.7%.On the basis of the experimental results, the most efficient enzyme membrane was selected and used for the preparation of an acetylthiocholine biosensor. Its basic amperometric characteristics were investigated. A calibration plot was obtained for ATCh concentration ranging from 10 to 400 μM. A linear interval was detected along the calibration curve from 10 to 170 μM. The sensitivity of the constructed biosensor was calculated to be 0.066 μA μM^?1 cm^?2. The correlation coefficient for this concentration range was 0.996. The detection limit with regard to ATCh was calculated to be 1.80 μM.The potential application of the biosensor for detection and quantification of organophosphate pesticides was investigated as well. It was tested against sample solutions of Paraoxon. The biosensor detection limit for Paraoxon was determined, 7.39 × 10^?11 g l^?1, as well as the concentration interval (10^?10 to 10^?7 g l^?1) within which the biosensor response was linearly dependant on Paraoxon concentration.Finally the storage stability of the enzyme carrier was traced for a period of 50 days. After storage for 20 days the sensor retained 75% of its initial current response and after 30 days ?25%.     

Purification and characterization of yellow laccase from Trametes hirsuta MTCC-1171 and its application in synthesis of aromatic aldehydes

A yellow laccase from the culture filtrate of Trametes hirsuta MTCC-1171 has been purified. The purification methods involved concentration of the culture filtrate by ammonium sulphate precipitation and an anion exchange chromatography on diethylaminoethyl cellulose. The sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and native polyacrylamide gel electrophoresis gave single protein band indicating that the enzyme preparation was pure. The molecular mass of the enzyme determined from SDS-PAGE analysis was 55.0 kDa. Using 2,6-dimethoxyphenol, 2,2′[azino-bis-(3-ethylbonzthiazoline-6-sulphonic acid) diammonium salt] and 3,5-dimethoxy-4-hydroxybenzaldehyde azine as the substrates, the K_m, k_cat and k_cat/K_m values of the laccase were found to be 420 μM, 13.04 s⁻¹, 3.11 × 10⁴ M⁻¹ s⁻¹, 225 μM, 13.03 s⁻¹, 1.3 × 10⁵ M⁻¹ s⁻¹ and 100 μM, 13.04 s⁻¹, 5.8 × 10⁴ M⁻¹ s⁻¹, respectively. The pH and temperature optima were 4.5 and 60 °C, respectively while pH and temperature stabilities were pH 4.5 and 50 °C. The activation energy for thermal denaturation of the enzyme was 18.6 kJ/mol/K. The purified laccase has yellow colour and does not show absorption band around 610 nm like blue laccases. The purified laccase transforms toluene, 3-nitrotoluene, 4-nitrotoluene, 3-chlorotoluene, 4-chlorotoluene and 3,4-dimethoxytoluene to benzaldehyde, 3-nitrobenzaldehyde, 4-nitrobenzaldehyde, 3-chlorobenzaldehyde, 4-chlorobenzaldehyde and 3,4-dimethoxybenzaldehyde in the absence of mediator molecules in high yields.     

Detoxification of Indigo carmine using a combined treatment via a novel trimeric thermostable laccase and microbial consortium

For the first time, the investigation of Indigo carmine decolorization was done using an atypical Scytalidium thermophilum laccase. Crude and purified laccases required high temperatures and slight acidic pH to achieve maximum Indigo decolorization. Kinetic parameters (K_m and k_cat) of the homotrimeric laccase toward Indigo carmine were determined and laccase efficacy toward repeated dye decolorization process was studied. For the first time, 5 g l⁻¹ as initial Indigo carmine concentration were efficiently transformed up to 50% within 6 h of incubation using 0.1 U ml⁻¹ of laccase and without presence of any mediators. In this study, we showed that the atypical laccase transformed the indigoid dye structure, confirmed by the color changing from blue to red. This intermediate (red) was a subject to an efficient microbial consortium treatment monitored by measuring the decrease in optical density and the total organic carbon removal efficiencies. Toxicological studies via micro-toxicity test showed that the released enzymatic and adapted consortium degradation products were both non-toxic while the initial product was toxic.     

Enhancement of laccase production by Pleurotus ostreatus and its use for the decolorization of anthraquinone dye

The white-rot fungus Pleurotus ostreatus strain 32 is an excellent producer of the industrially important enzyme laccase. Laccase was the only ligninolytic activity detected in the supernatant when the fungus was grown in liquid culture with or without shaking. Growth and laccase production in static cultivation were superior to that in agitated cultivation, and N-limited culture is of benefit to laccase production. When using cellobiose and peptone as carbon and nitrogen source, a higher activity level was obtained. 2,2′-Azino-di-(3-ethylbenzothialozin-6-sulfonic acid) (ABTS) (1 mM) was shown to be the best inducer of laccase production, reaching maximum values of about 400 U/ml. Cu²⁺ (1 mM) also had a positive effect on laccase production, activity being enhanced to 360 U/ml. In addition, anthraquinone dye SN4R can be effectively decolorized by crude laccase (30 U/ml), the rate of which was 66%. The decolorization rate was increased by 90% with ABTS (0.16%) addition as a mediator of laccase.     

Effect of feather meal as proteic feeder on combi-CLEAs preparation for grape juice clarification

This work describes the preparation of combi-CLEAs of pectinases using feather meal as novel proteic feeder. Initially, four solvents were tested as precipitant agents, and ethanol was chosen as the best solvent. Subsequently, a 2³ factorial design was carried out to define the optimal conditions for combi-CLEAs preparation, which were set as 110 mM of glutaraldehyde, 0.66 mg protein mL⁻¹ and 5 h of reaction time. Then, the effect of BSA or feather meal (FM) as proteic feeders was evaluated. Combi-CLEAs, combi-CLEAs-BSA and combi-CLEAs-FM were characterized and evaluated by their activity recovery, optimal pH and temperature, operational and thermal stabilities and e effectiveness on juice clarification. The addition of feather meal increased two-fold the activity recovery compared to BSA. The thermal stability was similar for all combi-CLEAs, providing stabilization factors of 1.12, 1.48 and 1.53, respectively, for the combi-CLEA, combi-CLEA-FM and combi-CLEA-BSA, compared to free enzyme. CLEAs presented turbidity reduction near to 50%, 2.5-fold than soluble enzyme. Feather meal was used for the first time as proteic feeder for CLEA preparations and appears to be a good, and low price, alternative.     

A novel immobilization method for nuclease P1 on macroporous absorbent resin with glutaraldehyde cross-linking and determination of its properties

Microbial nuclease P₁ from Penicllium citrinum was immobilized on macroporous absorbent resins: strong polar poly (styrene-co-DVB) resin (SPPSD), polymethacrylic ester resin and poly (styrene-co-DVB)-Br resin. The results showed that SPPSD was the best carrier. Three methods of glutaraldehyde cross-linking were used and simultaneous immobilization and cross-linking (CIS) was demonstrated to be the best method. The functional properties of immobilized nuclease P₁ were studied and compared to those of the free enzyme. The highest enzyme activities of free and immobilized nuclease P₁ were obtained in 0.2 M acetate buffer at pH 4.5 and a temperature of 70 °C. An increase in K_m (from 3.165 to 18.125 mg mL^?1) and a decrease in V_max (from 1667.18 to 443.95 U min^?1 mL^?1) were recorded after immobilization. SPPSD-glutaraldehyde-nuclease P₁ exhibited better thermal stability than the free enzyme. The apparent activation energy (E_a) of the free and immobilized nuclease P₁ was 137.04 kJ mol^?1 and 98.43 kJ mol^?1, respectively, implying that the catalytic efficiency of the immobilized enzyme was restricted by mass-transfer rather than kinetic limit.     

Immobilization of fungal (Trametes versicolor) laccase onto Amberlite IR-120 H beads: Optimization and characterization

Laccase from Trametes versicolor was immobilized on Amberlite IR-120 H beads. Maximum immobilization obtained was 78.7% at pH = 4.5 and temperature T = 45 °C. Kinetic parameters, K_m and V_max values, were determined respectively as 0.051 mM and 2.77 × 10^?2 mM/s for free and 4.70 mM and 5.27 × 10^?3 mM/s for immobilized laccase. The Amberlite–laccase system showed a 30% residual activity after 7 cycles. On the other hand, the loss of activity for free laccase after 7 days of storage at 4 °C was 18.5% in comparison to Amberlite–laccase system with a loss of 1.4%, during the same period. Improved operational, thermal and storage stabilities of the immobilized laccase were obtained compared to the free counterpart. Therefore, the use of low-cost matrices, like Amberlite for enzyme immobilization represents a promising product for enzymatic industrial applications.     

Cloning,expression, and characterization of a thermostable and pH-stable laccase from Klebsiella pneumoniae and its application to dye decolorization

A thermostable and pH-stable laccase from Klebsiella pneumoniae was cloned and expressed in Escherichia coli. The recombinant laccase (rLac) achieved a specific activity of 7.12 U/mg after purification by Ni-affinity chromatography. Optimal enzyme activity was observed at pH 4.0 and 35 °C for 2,2′-azino-bis (3-ethylbenzthiazoline sulfonic acid) (ABTS) oxidization and pH 8.0 and 70 °C for 2,6-dimethoxyphenol (2,6-DMP) oxidization. Thermostability and pH stability studies showed that the rLac was stable over the range of 30–70 °C and pH 5.0–9.0 using 2,6-DMP as substrate. Circular dichroism analysis suggested that the secondary structure of the rLac mainly consisted of α-helix that played a vital role in maintaining laccase activity and revealed the potential mechanisms for the changes in laccase activity under varying pHs (3.0–11.0) and temperatures (20–90 °C). Finally, the rLac could decolorize the tested dyes with high decolorization efficiency.     

Improving the activity and stability of Yarrowia lipolytica lipase Lip2 by immobilization on polyethyleneimine-coated polyurethane foam

In this study, polyurethane foam (PUF) was used for immobilization of Yarrowia lipolytica lipase Lip2 via polyethyleneimine (PEI) coating and glutaraldehyde (GA) coupling. The activity of immobilized lipases was found to depend upon the size of the PEI polymers and the way of GA treatment, with best results obtained for covalent-bind enzyme on glutaraldehyde activated PEI-PUF (MW 70,000 Da), which was 1.7 time greater activity compared to the same enzyme immobilized without PEI and GA. Kinetic analysis shows the hydrolytic activity of both free and immobilized lipases on triolein substrate can be described by Michaelis–Menten model. The K_m for the immobilized and free lipases on PEI-coated PUF was 58.9 and 9.73 mM, respectively. The V_max values of free and immobilized enzymes on PEI-coated PUF were calculated as 102 and 48.6 U/mg enzyme, respectively. Thermal stability for the immobilization preparations was enhanced compared with that for free preparations. At 50 °C, the free enzyme lost most of its initial activity after a 30 min of heat treatment, while the immobilized enzymes showed significant resistance to thermal inactivation (retaining about 70% of its initial activity). Finally, the immobilized lipase was used for the production of lauryl laurate in hexane medium. Lipase immobilization on the PEI support exhibited a significantly improved operational stability in esterification system. After re-use in 30 successive batches, a high ester yield (88%) was maintained. These results indicate that PEI, a polymeric bed, could not only bridge support and immobilized enzymes but also create a favorable micro-environment for lipase. This study provides a simple, efficient protocol for the immobilization of Y. lipolytica lipase Lip2 using PUF as a cheap and effective material.