Experimental evaluation of liquid film resistance in oxygen transport to microbial cells

A membrane probe was used to monitor the dissolved oxygen concentrations in continuous cultures of Candida utilis and Micrococcus roseus growing at low dissolved oxygen concentrations and various agitation levels. For the yeast fermentations, increasing the agitation level within the range of 0.1 to 0.3 w per liter lowered steady-state dissolved oxygen concentrations in the fermentor. The steady-state dissolved oxygen concentration in the fermentor was not influenced by the agitation level within the range of 0.3 to 1.8 w per liter. With M. roseus, no effect of agitation on steady-state dissolved oxygen concentrations in the fermentor was observed within the range of 0.1 to 1.8 w per liter. It was concluded that, under the conditions used, a measurable transfer barrier from the liquid to the yeast cells existed at agitation levels below 0.3 w per liter and that this barrier did not exist at agitation levels above 0.3 w per liter. The transfer barrier from the liquid to the yeast surface could be represented by a stagnant film of liquid 0.6 × 10^-4 cm thick surrounding the cell at an agitation level of 0.10 w per liter. This film represented an oxygen concentration drop of 1.3 × 10^-7 M from the bulk of the medium to the cells under the experimental conditions.     

Optimization of agitation and aeration conditions for maximum virginiamycin production

To maximize the productivity of virginiamycin, which is a commercially important antibiotic as an animal feed additive, an empirical approach was employed in the batch culture of Streptomyces virginiae. Here, the effects of dissolved oxygen (DO) concentration and agitation speed on the maximum cell concentration at the production phase, as well as on the productivity of virginiamycin, were investigated. To maintain the DO concentration in the fermentor at a certain level, either the agitation speed or the inlet oxygen concentration of the supply gas was manipulated. It was found that increasing the agitation speed had a positive effect on the antibiotic productivity independent of the DO concentration. The optimum DO concentration, agitation speed and addition of an autoregulator, virginiae butanolide C (VB-C), were determined to maximize virginiamycin productivity. The optimal strategy was to start the cultivation at 450 rpm and to continue until the DO concentration reached 80%. After reaching 80%, the DO concentration was maintained at this level by changing the agitation speed, up to a maximum of 800 rpm. The addition of an optimal amount of the autoregulator VB-C in an experiment resulted in the maximal production of virginiamycin M (399 mg/l), which was about 1.8-fold those obtained previously. Received: 13 July 1998 / Received revision: 19 August 1998 / Accepted: 13 September 1998     

溶氧对变溶菌素发酵的影响

变溶菌素是由球孢链霉菌产生的一种胞外溶菌酶群。它包括几种不同类型的溶菌酶,有着广阔的用途和良好的应用前景。许多研究结果[1,2]表明,它比卵清溶菌酶有更为广泛的溶菌谱,应用范围更广,尤其是在预防和治疗龋齿[3]方面有其独特的优点。在医药上可用作灭菌剂,也可用其作?..     

Preferential and high-yield production of a cephamycin C by dissolved oxygen controlled fermentation

Streptomyces sp. P6621-RS1726, a high cephamycin C producing mutant, usually produces cephamycin C together with its precursor, penicillin N, in flask fermentation. The fermentation conditions for selective and high yield production of cephamycin C were investigated using 20-l jar fermentors. As a result, cephamycin C was preferentially produced without penicillin N when the DO level was maintained at least higher than at 10% during the production phase. However, when the agitation speed was too high at the initial stage of the fermentation, the cell growth was inhibited, resulting in suppression of both cephamycin C and penicillin N production, even if the DO was maintained at a high level. Based on these experiments, a computer control system for preferential and high-yield production of cephamycin C was constructed. By using this computer control system, scale-up from a 20-l jar fermentor to a 1,500-l pilot fermentor was carried out with control of the DO level at 20% of saturation during the cephamycin C production phase. As a result, the profile of cephamycin C production in the former was favorably reproduced in the latter.     

溶氧对Blakeslea trispora分批发酵生产β-胡萝卜素的影响

在摇瓶和5 L发酵罐中研究了溶氧 (DO) 对Blakeslea trispora分批发酵生产β-胡萝卜素的影响,总结了5 L发酵罐中β-胡萝卜素发酵过程中溶氧的变化规律.结果表明,当500 mL摇瓶装液量为50 mL,转速为240 r/min条件下发酵生产β-胡萝卜素产量最大,达到3.416 g/L; 5 L发酵罐中,在搅拌转速为1 000 r/min,通气量为1.5 vvm的条件下,β-胡萝卜素的产量可达到3.712 g/L,略高于摇瓶,这可能是由于5 L发酵罐中的气液传递和混合状况好于摇瓶,促进了产物的合成.     

Comparative study on the influence of dissolved oxygen control approaches on the microbial hyaluronic acid production of <Emphasis Type="Italic">Streptococcus zooepidemicus</Emphasis>

Three different dissolved oxygen (DO) control approaches were proposed to improve hyaluronic acid (HA) production: a three-stage agitation speed control approach, a two-stage DO control approach, and an oxygen vector perfluorodecalin (PFC) applied approach. In the three-stage agitation speed control approach, agitation speed was 200 rpm during 0–8 h, 400 rpm during 8–12 h, and 600 rpm during 12–20 h. In the two-stage DO control strategy, DO was controlled at above 10% during 0–8 h and at 5% during 8–20 h. In the PFC applied approach, PFC (3% v/v) was added at 8 h. HA production reached 5.5 g/L in the three-stage agitation speed control culture model, and 6.3 g/L in two-stage DO control culture model, and 6.6 g/L in the PFC applied culture model. Compared with the other two DO control approaches, the PFC applied approach had a lower shear stress and thus a higher HA production was achieved.     

Effect of oxygen and shear stress on molecular weight of hyaluronic acid

Dissolved oxygen (DO) and shear stress have pronounced effects on hyaluronic acid (HA) production, yet various views persist about their effect on the molecular weight of HA. Accordingly, this study investigated the effects of DO and shear stress during HA fermentation. The results showed that both cell growth and HA synthesis were suppressed under anaerobic conditions, and the HA molecular mass was only (1.22+/-0.02) x 106 Da. Under aerobic conditions, although the DO level produced no change in the biomass or HA yield, a high DO level favored the HA molecular mass, which reached a maximum value of (2.19+/- 0.05) x 106 Da at 50% DO. Furthermore, a high shear stress delayed the rate of HA synthesis and decreased the HA molecular weight, yet had no clear effect on the HA yield. Therefore, a high DO concentration and mild shear environment would appear to be essential to enhance the HA molecular weight.     

Cost-effective dissolved oxygen monitor–controller for continuous culture

A number of devices for the control of the dissolved oxygen (DO) tension in small continuous cultures are now in use, but because of the sophisticated proportional control employed, are prohibitively expensive for many applications. This report describes a flexible cost-efficient DO monitor and controller which, including DO probe, valves, and gas solenoid, can be constructed for 400 dollars. The device employs two-position control of gas flow and agitation speed and is readily adaptable to a variety of application; Construction, operation, and performance in conjunction with a small fermentor are briefly discussed.     

Increase of xylitol production rate by controlling redox potential in Candida parapsilosis

The effect of redox potential on xylitol production by Candida parapsilosis was investigated. The redox potential was found to be useful for monitoring the dissolved oxygen (DO) level in culture media, especially when the DO level was low. An increase in the agitation speed in a 5 L fermentor resulted in an increased culture redox potential as well as enhanced cell growth. Production of xylitol was maximized at a redox potential of 100 mV. As the initial cell concentration increased from 8 g/L to 30 g/L, the volumetric productivity of xylitol increased from 1.38 g/L. h to 4.62 g/L. h. A two-stage xylitol production strategy was devised, with stage 1 involving rapid production of cells under well-aerated conditions, and stage 2 involving cultivation with reduced aeration such that the culture redox potential was 100 mV. Using this technique, a final xylitol concentration of 180 g/L was obtained from a culture medium totally containing 254.5 g/L xylose in a 3,000 L pilot scale fermentor after 77 h fermentation. The volumetric productivity of xylitol during the fermentation was 2.34 g/L. h.     

Control of carbon source supply and dissolved oxygen by use of carbon dioxide concentration of exhaust gas in fed-batch culture

Accurate and automatic control strategies for a feedback-control system of volatile carbon source feeding and dissolved oxygen (DO) level were investigated. To maintain the optimal ethanol concentration for microbial growth, carbon dioxide concentration in exhaust gas was used as a stepwise control parameter of ethanol feeding. A proportional-differential (PD) control program was used to correct the errors. The coefficient of stepwise control was calculated stoichiometrically, and parameters of PD were experimentally preset and were not changed during cultivation. DO was also controlled by the PD control and the stepwise program based on carbon dioxide concentration of the exhaust gas. Agitation speed and partial pressure of oxygen of the inlet gas were changed stepwise in accordance with the oxygen consumption rate. The stepwise coefficients were estimated from stoichiometry and material balance of molecular oxygen. The PD control program was only used for the agitation speed control to correct the fluctuations of DO level. The parameters did not need to be changed during cultivation. By use of these sophisticated control programs for fed-batch culture of Candida brassicae, ethanol concentration and DO level were accurately controlled at 3.4–3.7 g/l and 2.2–2.8 ppm, respectively, while cell mass concentration reached about 80 g/l. No manual operation was needed.     

Laccase-induced C–N coupling of substituted <Emphasis Type="Italic">p</Emphasis>-hydroquinones with <Emphasis Type="Italic">p</Emphasis>-aminobenzoic acid in comparison with known chemical routes

Magnetotactic bacteria are difficult to grow under defined conditions in culture, which has presented a major obstacle to commercial application of magnetosomes. We studied the relationships among the cell growth, magnetosome formation, dissolved oxygen concentration (DO), and the ability to supply oxygen to the cells. Mass culture of Magnetospirillum gryphiswaldense MSR-1 for the production of magnetosomes was established in a 42-L fermentor under the following conditions: (1) sterile air was the sole gas supplied in the fermentor, and DO could be regulated at any level below 10% saturation by cascading the stir rate to DO, (2) to resolve the paradoxical situation that the cell growth requires higher DO whereas magnetosome formation requires low DO below the detectable range of regular oxygen electrode, DO was controlled to optimal level using the change of cell growth rate, rather than reading from the highly sensitive oxygen electrode, as the signal for determining appropriate DO, and (3) timing and rate of supplying the substrates were determined by measuring cell density and Na-lactate concentration. Under these conditions, cell density (OD565) of strain MSR-1 reached 7.24 after 60-h culture in a 42-L fermentor, and cell yield (dry weight) was 2.17 g/L, the highest yield so far being reported. The yield of magnetosomes (dry weight) was 41.7 mg/L and 16.7 mg/L/day, which were 2.8 and 2.7 times higher than the previously reported yields.     

Optimization of culture condition for the production of D-amino acid oxidase in a recombinant Escherichia coli

The gene encoding D-amino acid oxidase (DAAO) from Trigonopsis variabilis CBS 4095 has been cloned and expressed in Escherichia coli BL21 (DE3). Unfortunately, it was observed that the host cell was negatively affected by the expressed DAAO, resulting in a remarkable decrease in cell growth. To overcome this problem, we investigated several factors that affect cell growth rate and DAAO production such as addition time of inducer and dissolved oxygen (DO) concentration. The addition time of lactose, which was used as an inducer, and DO concentration appeared to be critical for the cell growth of E. coli BL21 (DE3)/pET-DAAO. A two-stage DO control strategy was developed, in which the DO concentration was controlled above 50% until specific stage of bacterial growth (OD₆₀₀ 30–40) and then downshifted to 30% by changing the agitation speed and aeration rate, and they remained at these rates until the end of fermentation. With this strategy, the maximum DAAO activity and cell growth reached 18.5 U/mL and OD₆₀₀ 81, respectively. By reproducing these optimized conditions in a 12-m³ fermentor, we were able to produce DAAO at a productivity of 19 U/mL with a cell growth of OD₆₀₀ 80.     

An oxygen supply strategy for the large-scale production of tissue plasminogen activator by microcarrier cell culture

An oxygen supply strategy involving agitation speed and aeration method for the large-scale production of tissue plasminogen activator (TPA) by a microcarrier cell culture was investigated by small-scale model experiments. A preliminary calculation indicated that diffusion limitation of dissolved oxygen (DO) could be caused in a microcarrier sedimentation layer more than 0.5 mm in thickness. Within an agitation speed range above 70 rpm, which was the critical speed for all of the microcarrier beads to remain suspended and thus for avoiding a deficiency of DO, the TPA productivity was higher at a lower agitation speed, while the cell concentration was not affected by the agitation speed. The addition of soluble starch to the culture medium prevented sedimentation of the microcarrier beads, even at the low agitation speed of 20 rpm, resulting in a TPA productivity higher than that at 70 rpm, which was the optimum speed without soluble starch. Use of an air spray system with an optimized air flow rate resulted in a k_La 2.35 times higher than that with simple surface aeration. Increasing the internal pressure of the culture from 0.2 kg/cm² (1209 hPa) to 1.5 kg/cm² (2483 hPa) had no effect on the cell growth but slightly increased the TPA production rates. However, based on the glucose consumption, both the cell and TPA yields were much improved by pressurization. As an optimum mixing and oxygen supply strategy for the production of TPA on a large scale, it is recommended that soluble starch be added to the culture medium to allow the microcarrier suspension to be maintained at a low agitation speed, while keeping a high oxygen transfer rate by means of an air spray system and pressurization.     

Mechanistic analysis of xanthan gum production in a stirred tank

The overall effect of agitation on xanthan gum production by Xanthomonas campestris ATCC13951 in a stirred vessel was mechanistically analyzed considering local variation of the specific production rate due to variation of shear stress in the vessel. The whole liquid volume in a fermentor was roughly divided into three regions; the micromixing region around the impeller with high shear stress, the macromixing region dominated by a circulating flow and the stagnant region. The value of the shear rate was first ascertained by experiments in order to obtain a picture of shear rate variation in a radial direction from the impeller, and the equivalence between the volumes of the high shear stress region and micromixing region was confirmed. The shear stress obtained using a correlation between the shear rate at the impeller tip and Reynolds number of Wichterle et al. was used as a representative of the shear stress in the micromixing region, and the shear stress estimated by use of an empirical correlation between the average shear rate in a fermentor and agitation speed derived by Metzner et al. was adopted as a representative of the shear stress in the macromixing region. The information about the circulation time distribution was also used to take into account oxygen deficiency during circulation of liquid elements in the macromixing region, considering that oxygen from the gas phase was supplied mainly in the high shear region. The calculated values of xanthan gum concentrations which were obtained by the proposed simulation method agreed well with the experimental data in the time course of xanthan gum production at various agitation speeds. Experimental results of the relationship between the overall specific production rate and ND (N, agitation speed, and D, impeller diameter) was also verified by the proposed method.     

Studies on the production of bacterial rennet in a pilot plant fermentor

An attempt was made to find out the optimum aeration and agitation rates on the production of bacterial rennet from Bacillus sublilis K-26 using 5% wheat bran medium in a 13 liter fermentor. The enzyme activity and the growth rate were shown to increase with an increase in the rate of agitation. The fermentation experiments carried out at an agitation rate of 400 rpm showed an approximate threefold increase in enzyme activity with a considerable decrease in the fermentation time over those agitated at 200 and 300 rpm. The beneficial effect of a higher oxygen rate was observed for enzyme production occurring at a lower agitation rate. The inoculum activity and the varying amounts of antifoam agent which were added showed no apparent effect either on the total incubation time or on the final enzyme activity. It has been suggested that an agitation rate of 400 rpm with an aeration level of 3000 cc/min are the optimum values for the efficient production of bacterial rennet from B. subtilis K-26 using 5% wheat bran medium in a 13 liter fermentor.     

Influence of Dissolved Oxygen Levels on Production of l-Asparaginase and Prodigiosin by Serratia marcescens

The effect of dissolved oxygen concentrations on the behavior of Serratia marcescens and on yields of asparaginase and prodigiosin produced in shaken cultures and in a 55-liter stainless-steel fermentor was studied. A range of oxygen transfer rates was obtained in 500-ml Erlenmeyer flasks by using internal, stainless-steel baffles and by varying the volume of medium per flask, and in the fermentor by high speed agitation (375 rev/min) or low rates of aeration (1.5 volumes of air per volume of broth per min), or both. Dissolved oxygen levels in the fermentation medium were measured with a membrane-type electrode. Peak yields of asparaginase were obtained in unbaffled flasks (3.0 to 3.8 IU/ml) and in the fermentor (2.7 IU/ml) when the level of dissolved oxygen in the culture medium reached zero. A low rate of oxygen transfer was accomplished by limited aeration. Production of prodigiosin required a supply of dissolved oxygen that was obtainable in baffled flasks with a high rate of oxygen transfer and in the fermentor with a combination of high-speed agitation and low-rate aeration. The fermentation proceeded at a more rapid rate and changes in pH and cell populations were accelerated by maintaining high levels of dissolved oxygen in the growth medium.     

Heterotrophic cultivation of Euglena gracilis Z for efficient production of α-tocopherol

Effects of hydrodynamic stress, dissolved oxygen (DO) concentration and carbon sources on heterotrophic α-tocopherol production by Euglena gracilis were investigated. In a jar fermentor without baffle plates, increasing the agitation speed up to 500 rpm had no significant effect on cell growth and α-tocopherol production. However, in a jar fermentor equipped with baffle plates, both the cell growth and α-tocopherol production were highly suppressed at 500 rpm. At high hydrodynamic stress, the cells secreted nucleic acid-related substances to the culture broth and the shape of the cells shifted from elongated toward spherical. High DO concentration had adverse effects on both cell growth and α-tocopherol production, the optimum DO concentration being below 0.8 ppm. In comparison with glucose, the growth rate was lower but the α-tocopherol content of the cells was almost four times higher when ethanol was used as the organic carbon source. In a fed-batch culture with ethanol, a very high cell concentration of 39.5 g L^-1 was obtained with α-tocopherol content of 1200 μg g-cell^-1. This α-tocopherol content is very close to the values reported for photoautotrophic and photoheterotrophic cultures. A very high α-tocopherol productivity of 102 μg L^-1 h^-1 was obtained, indicating that heterotrophic cultivation of E. gracilis has a very high potential as a substitute for the current method of extraction from vegetable oils. This revised version was published online in June 2006 with corrections to the Cover Date.     

Metabolic control of hyaluronan synthases

Hyaluronan (HA) is a glycosaminoglycan composed by repeating units of D-glucuronic acid (GlcUA) and N-acetylglucosamine (GlcNAc) that is ubiquitously present in the extracellular matrix (ECM) where it has a critical role in the physiology and pathology of several mammalian tissues. HA represents a perfect environment in which cells can migrate and proliferate. Moreover, several receptors can interact with HA at cellular level triggering multiple signal transduction responses. The control of the HA synthesis is therefore critical in ECM assembly and cell biology; in this review we address the metabolic regulation of HA synthesis. In contrast with other glycosaminoglycans, which are synthesized in the Golgi apparatus, HA is produced at the plasma membrane by HA synthases (HAS1-3), which use cytoplasmic UDP-glucuronic acid and UDP-N-acetylglucosamine as substrates. UDP-GlcUA and UDP-hexosamine availability is critical for the synthesis of GAGs, which is an energy consuming process. AMP activated protein kinase (AMPK), which is considered a sensor of the energy status of the cell and is activated by low ATP:AMP ratio, leads to the inhibition of HA secretion by HAS2 phosphorylation at threonine 110. However, the most general sensor of cellular nutritional status is the hexosamine biosynthetic pathway that brings to the formation of UDP-GlcNAc and intracellular protein glycosylation by O-linked attachment of the monosaccharide β-N-acetylglucosamine (O-GlcNAcylation) to specific aminoacid residues. Such highly dynamic and ubiquitous protein modification affects serine 221 residue of HAS2 that lead to a dramatic stabilization of the enzyme in the membranes.     

Effect of dissolved oxygen concentration on repeated production of gluconic acid by immobilised mycelia of Aspergillus niger

Summary Gluconic acid production from corn starch hydrolysates by immobilised mycelia of Aspergillus niger was studied in a laboratory-scale stirred fermentor at different concentrations of glucose (S ₀) and dissolved oxygen (DO) in the culture broth. Its evolution was simulated quite well by applying the same unstructured model set up in previous experiments using stirred and airlift fermentors. In particular, increasing S ₀ in the range 70–160 g/l, although uninfluential upon the yield coefficient, resulted in an exponential decrease in the gluconic acid formation rate constant. Nevertheless, the greater the oxygen transfer rate used in the fermentor, the smaller the inhibitor effect of the higher concentrations of glucose on gluconate productivity became. This was achieved by enriching the inlet air with pure oxygen so as to maintain the DO level above 75% saturation throughout the fermentation. Offprint requests to: M. Moresi