Suppression of an Escherichia coli dnaA mutation by the integrated R factor R.100.1: Change of chromosome replication origin in synchronized cultures.

We have followed, by deoxyribonucleic acid-deoxyribonucleic acid hybridization, the order of replication of three chromosomal markers during a synchronous round of replication in three strains of Escherichia coli carrying a dnaAts mutation: one strain in which the F-like R factor R.100.1 was established as a plasmid and two strains in which the dnaA mutation was suppressed by the integration of R.100.1 into the chromosome. In the R+ strain at 30C, replication of the plasmid took place simultaneously with the initiation of chromosome replication at the normal origin. In the integratively suppressed Hfr strains, at 42.5 C, chromosome replication was initiated preferentially from the integrated plasmid; little or no initiation occurred at the normal origin. Similar results were obtained for the one strain tested at 30 C. For both Hfr strains at 42.5 C, the data suggest that at least part of the population replicated bidirectionally. This conclusion had been confirmed using an autoradiographic procedure. Both types of experiment indicate a wide variation in the rate of travel of individual replication forks within the population.     

Participation of plasmid F in the replication of the chromosome of an Hfr strain of Escherichia coli K-12

In the region of plasmid F DNA with coordinates 52,2-55,8 kb, the chr ("chromosome replication") locus has been revealed. A failure in the functioning of this locus in the integrated plasmid, which leads to a temperature-sensitive disturbance in chromosome replication of the Hfr strain and to the changes in its sensitivity to some membranotropic agents. Integration of an F segment containing the chr+ allele into the chromosome of an F-like derivative of such Hfr strain (retaining a mutant part of the F DNA), results in formation of temperature-resistant clones. In these clones, chromosomal replication is controlled by the plasmid replicon at the elevated temperature. It has been concluded that the F plasmid can control chromosome replication of the dna+ HfrC strain of Escherichia coli K-12 and that the product of the chr gene is a membrane protein involved in chromosomal replication.     

Chromosome-plasmid interaction in Escherichia coli K-12 carrying a thermosensitive plasmid, Rts1, in autonomous and in integrated states.

An Hfr strain of Escherichia coli K-12 was obtained by integrative suppression with a thermosensitive plasmid, Rts1. The R plasmid was integrated into the chromosome between rif and thr, and transfer of the chromosome occurred counterclockwise. The thermosensitivity of host cell growth due to the dnaA mutation was markedly but not completely reduced in this integratively suppressed Hfr strain. When the dnaA mutation was removed by transducing the dnaA+ genome to this Hfr, the thermosensitivity of cell growth due to existence of Rts1 was suppressed in contrast to strains carrying it autonomously. Thermosensitivity of cell growth appeared again when the plasmid was detached from the chromosome to exist autonomously. Contrary to the effect on cell growth, the transfer of the chromosome and the plasmid itself and the ability to "restrict" T-even phages were still thermosensitive in all of these strains carrying Rts1, irrespective of its state of existence. The detached plasmid as well as the original Rts1 were segregated upon growth at 42 C. These data are discussed in relation to chromosome-plasmid interaction. One of the most important conculusions is that some plasmid genes, related to their replication, are phenotypically suppressed by the chromosome when it is integrated.     

Identification and mapping of the replication genes of an R factor, R100-1, integrated into the chromosome of Escherichia coli K-12

A stable Hfr strain of Escherichia coli K-12 was obtained by integrative suppression by an R factor, R100-1. The R factor was integrated into the right of 81 min, and chromosome transfer occurred counterclockwise. Mating experiments revealed two linkage groups of genes on the R factor. Drug-resistant transductants of a dnaA-ts recipient from an R-factor Hfr and from an R(+) strain differ in their drug resistance patterns, temperature sensitivity, and transferability of drug resistance as well as chromosome markers. Transductants that transferred chromosome markers were further classified as to the origin and direction of chromosome transfer. For temperature-sensitive transductants, the reversion frequency to temperature resistance was determined, and these revertants were scored for transfer of drug resistance as well as chromosome markers. Two genes responsible for integrative suppression (designated as repA) and the other for autonomous replication (designated as repB) were identified and mapped. The arrangement of genes on the R factor is... (sul, str, cml)... repA... tra... (tet, repB).... The map of the autonomously replicating R factor is probably a circle connecting both sides of this linear map. Thus, a method has been established to map a plasmid that could not finely be analyzed under autonomous state by transduction. It also permits genetic analysis of genes responsible for replication of the plasmid without making use of a conditional mutant of itself but with that of the host, dnaA.     

Suppression of an Escherichia coli dnaA mutation by the integrated R factor R100.1: origin of chromosome replication during exponential growth.

We have investigated the behavior, during exponential growth, of strains of Escherichia coli carrying a dnaA(Ts) mutation that has been suppressed by the integration of the F-like R plasmid R100.1. We present evidence showing that replication in these strains proceeds largely from the normal chromosome origin at 30 degrees C, a permissive temperature for the dnaA(Ts) gene product, whereas, at 42 degrees C, replication proceeds largely from the integrated plasmid. These conclusions are based on measurements made by deoxyribonucleic acid:deoxyribonucleic acid hybridization of the relative frequencies of the prophages Mu-1 and lambdaind- and R100.1 integrated at known locations on the E. coli chromosome in these Hfr strains.     

Functioning of the F-plasmid origin of replication in an Escherichia coli K12 Hfr strain during exponential growth

The pattern of chromosome replication in the Escherichia coli K12 Hfr strain KL99 was investigated during exponential growth by DNA-DNA hybridization. The levels of chromosomal markers close to the point of insertion of F (near pyrC) were raised in relation to other markers by comparison with the situation in an isogenic F- strain. The data are shown to be consistent with the proposal that the integrated F plasmid was regulating its copy number by a mass-titration mechanism.     

IS21 insertion in the trfA replication control gene of chromosomally integrated plasmid RP1: a property of stable Pseudomonas aeruginosa Hfr strains

Summary Broad host range IncP-1 plasmids are able to integrate into the chromosome of gram-negative bacteria. Strains carrying an integrated plasmid can be obtained when the markers of a temperature-sensitive (ts) plasmid derivative are selected at non-permissive temperature; in this way Hfr (high frequency) donor strains can be formed. The integrated plasmids, however, tend to be unstable in the absence of continuous selective pressure. In order to obtain stable Hfr donor strains of Pseudomonas aeruginosa PAO, we constructed a derivative of an RP1 (ts) plasmid, pME134, which was defective in the resolvase gene (tnpR) of transposon Tn801. Chromosomal integration of pME134 was selected in a recombination-deficient (rec-102) PAO strain at 43°C. Plasmid integration occurred at different sites resulting in a useful set of Hfr strains that transferred chromosomal markers unidirectionally. The tnpR and rec-102 mutations prevented plasmid excision from the chromosome. In several (but not all) Hfr strains that grew well and retained the integrated plasmid at temperatures below 43°C, the insertion element IS21 of RP1 was found to be inserted into the trfA locus (specifying an essential trans-acting replication funtion) of the integrated plasmid. One such Hfr strain was rendered rec ⁺; from its chromosome the pME134::IS21 plasmid (=pME14) was excised and transferred by conjugation to Escherichia coli where pME14 could replicate autonomously only when a helper plasmid provided the trfA ⁺ function in trans. Thus, it appears that trfA inactivation favours the stability of chromosomally integrated RP1 in P. aeruginosa.     

Interaction (integration and excision) of the pRP19.6 plasmid, a derivative of the RP1 plasmid containing duplicated sequence IS21, with the chromosome of Escherichia coli K12

A pRP19.6 plasmid is the derivative of the temperature sensitive RPlts12 plasmid and contains a duplicated IS21 (IS8) element. Using temperature sensitive pRP19.6 replication, Hfr strains have been obtained by integration of the plasmid into the chromosome of E. coli rec+ and recA- cells and their properties were studied. According to the results obtained, pRP19.6 insertion into the genome of the rec+ bacteria IS reversible, and its integration into the chromosome of the recA- bacteria produced the stable Hfr strains. To elucidate the mechanism of pRP19.6 excision from the bacterial chromosome, plasmids of R+ transconjugates generated with a low frequency in the crosses between the stable Hfr strains and the rec+ recipients were analyzed. It was shown that the stable Hfr clones might produce stable R1 plasmids as well as a family of deletion KmsTra- derivatives of the pRP19.6. The structure of the KmsTra- was investigated and the mechanism of their formation was proposed. In the light of the data obtained, prospects of pRP19.6 practical application are discussed.     

Tetracycline-resistance inEscherichia coli; a genetic contribution

A non-transmissible tetracycline-resistance plasmid inE. coli was found to be transmissible by transduction and by conjugation with the aid of theE. coli K12 sex-factor. Transfer of the tetracycline-resistance plasmid (R-tet) by transduction or conjugation to anE. coli K12 Hfr strain revealed that the plasmid was incompatible with the integrated F-factor. Selection for tetracycline-resistance after conjugation or transduction yielded Hfr colonies which carried the tetracycline-resistance determinant as a chromosomal marker. The tetracycline-resistance determinant was integrated at the 1 min region of theE. coli chromosome map (Taylor and Trotter, 1967) between the markersara andleu. Apart from Hfr colonies with a chromosomal tetracycline-resistance determinant, F-gal⁺-mediated transfer of R-tet to strain Hfr R4 gave some colonies in which the tetracycline-resistance determinant was carried on a fused plasmid that, besides the resistance determinant, contained thegal ⁺ marker of the original F-gal ⁺. This fused plasmid is transmissible and confers to an F⁻ cell male-specific phage-sensitivity, like an F-factor does. It is suggested that this fused plasmid, which is compatible with the integrated F-factor in the Hfr R4 cells, arose by recombination between F-gal ⁺ and R-tet.     

Temperature-sensitive replication of plasmid pKM101

A mutant of Escherichia coli K-12, IB10 carrying the ts10 mutation has been isolated. The mutation affects replication and inheritance of pKM101 plasmid. Incubation of the mutant under non-selective conditions of 42 degrees C resulted in the formation of R-cell population. The frequency of temperature-independent clones was 2,1 X 10(-5). The defect of pKM101 replication was shown to result in growth inhibition of host cells at a non-permissive temperature. The host growth only started after elimination of the plasmid. The mechanisms are likely to exist governing the participation of plasmid gene products in processes related to host growth. The influence of ts10 mutation on replication of other plasmids was studied. It was established that ts10 did not affect replication of R6K, RP4 and Flac+ plasmids. However, replication of R15, R205 as well as of pKM101 plasmid stopped under conditions of non-permissive temperature in IB10 mutant. Obviously, ts10 mutation results in defective replication of plasmids only belonging to the N-incompatibility group (IncPN). It is shown that R6K, RP4, Flac+ plasmids are not able to correct pKM101 replication in the mutant at 42 degrees C.     

Suppression of initiation-negative strains of Escherichia coli by integration of the sex factor F.

Data are presented suggesting that the most critical factor determining whether an Hfr dnaAts strain can synthesize deoxyribonucleic acid and form colonies at temperatures that are nonpermissive for corresponding F- strains is neither the site of insertion of F nor the presence of additional mutations in the F particle or the chromosome; it is whether the particle is capable of autonomous replication at the temperature used. Consequently, suppression of the DnaA phenotype in Hfr strains occurs at 40 C but not, in most of them, at 42 C without the occurrence of additional mutations. The site of insertion of F may also be important since it is shown that in one Hfr dnaA strain partial suppression does occur at 42 C. In addition, it is shown that strains exhibiting suppression by integration of F at 40 C on minimal agar plates do not do so at this temperature on nutrient agar plates.     

Chromosome replication in an Hfr strain of Escherichia coli

The pattern of chromosome replication in an exponentially growing culture of an Hfr strain of Escherichia coli has been compared to that obtained with the same Hfr following a procedure which synchronizes rounds of DNA replication. The results indicate that there is significant replication from the integrated plasmid following the synchronization procedure, whereas in the exponentially growing culture replication starts most frequently from the normal origin with little, if any, replication from the sex factor, F.     

Trans-complementation-dependent replication of a low molecular weight origin fragment from plasmid R6K

A non-self-replicating segment (1370 base pairs) of plasmid R6K was cloned in E. coli and shown to trans-complement temperature-sensitive replication mutants of this plasmid. This segment contains the gene which codes for a protein required for initiation of replication of the plasmid, and was used as a helper in a functional assay for an origin of replication in R6K derivatives. A 420 bp fragment, derived from R6K DNA, was shown to carry a functional origin since it was capable of replicating as a plasmid in E. coli cells carrying the helper segment either on the host chromosome or on a plasmid Col E1 derivative. The copy number of the origin fragment in cells carrying the helper segment on the chromosome is essentially the same as the copy number of R6K. A model for the positive regulation of plasmid R6K replication is presented.     

oriX: A new replication origin in E. coli

Replication of the chromosome of E. coli at 42°C in an integratively suppressed dnaA mutant (dnaA46 Sin Hfr) occurs predominantly from the origin of replication of the integrated plasmid (oriV). We have carried out a detailed marker frequency analysis on such Hfrs. This analysis indicates that replication at 42°C occurs not only from oriV, but also from an origin, oriX, located in the terminal region of the chromosome close to, but distinct from, the prophage rac (oriJ). In an oxal mutant of one of these Hfrs, we have shown that replication proceeds at 42°C from all three origins: oriV, oriX, and oriC. Loss of the integrated plasmid results in a temperature- and rich-medium-sensitive strain that replicates the chromosome from oriC and oriX. Replication from oriX proceeds slowly and bidirectionally. We suggest that oriX may be involved in the coupling between replication and cell division.     

Temperature-sensitive mutations affecting the replication of F-prime factors in Escherichia coli K 12

Summary More temperature-sensitive mutants affecting the replication of the F-gal⁺ episome of Escherichia coli K12 have been isolated. Eight of the mutations were located on F itself and three were located on the chromosome.The temperature sensitive F-gal⁺'s have been integrated into the chromosome to produce Hfr strains. These Hfr strains have transfer origins similar to Hfr Cavalli, and all show aberrant excision and transfer of elongated segments of the chromosome including the integrated F-gal to generate long merodiploids.The chromosomal mutations that govern the replication of F have been termed seg (for segregation). Wild-type F-gal⁺ can be integrated into seg cells at 42° C to give Hfrs, in a process analogous to integrative suppression in the formation of Hfrs from cells carrying mutations that are temperature-sensitive for chromosomal DNA replication (dnaA). A curious feature of an Hfr derived from a seg strain is that it also shows F-genote enlargement as well as normal transfer of chromosomal genetic marker. Preliminary transductional mapping data show that the mutation seg-2 is linked to the threonine locus (minute 0).     

The effects of an Escherichia coli dnaAts mutation on the replication of the plasmids colE1 pSC101, R100.1 and RTF-TC.

Summary The rate of replication of the plasmids colE1, pSC101, R100.1 and pAR132 (an RTF-TC derivative of the drug resistance factor R100.1) has been investigated directly by DNA: DNA hybridization. These rates have been compared, in a dnaAts strain, to that of various markers of the host chromosome at permissive and non-permissive temperatures. Chromosome initiation in the dnaAts strain stops rapidly after a shift to the non-permissive temperature, but plasmids R100.1 and pAR132 do not seem to be affected directly and continue replication for some time. The colE1 replication rate undergoes a large increase after the temperature shift, followed by a rapid decrease to a very low level 25 min after the shift. In contrast pSC101 replication stops immediately after the shift. ColE1 is able to replicate in an integratively suppressed dnaAts strain at 42° C whereas pSC101 stops replication immediately under these conditions. We conclude that R100.1 and its derivative RTF-TC can replicate without a functional dnaA product; that colE1, while affected by a shift in temperature in a dnaAts strain, does not directly require dnaA; and that the plasmid pSC101 has an absolute requirement for dnaA. The absolute requirement of pSC101 for dnaA in the integratively suppressed Hfr strain provides a useful system for further investigations of the dnaA function.     

Expression of a mutation affecting F incompatibility in the integrated but not the autonomous state of F.

Previously we have described a mutant Hfr strain in which incompatibility between the integrated F factor and an autonomous F-prime (F') factor was abolished. The mutation (inc) was located in the integrated F factor. F-prime factors isolated from the mutant Hfr strain have the same incompatibility behavior as those isolated from normal Hfr strains. Reintegration of these F' factors into the chromosome restores the Inc- phenotype characteristic of the mutant Hfr. The inc mutation thus affects incompatibility between integrated F and autonomous F(Fi-Fa incompatibility) but not incompatibility between two autonomous F factors (Fa-Fa incompatibility). The implications of this finding for the mechanism of plasmid incompatibility are discussed.     

Host DNA replication forks are not preferred targets for bacteriophage Mu transposition.

Bacteriophage Mu DNA integration in Escherichia coli strains infected after alignment of chromosomal replication was analyzed by a sandwich hybridization assay. The results indicated that Mu integrated into chromosomal segments at various distances from oriC with similar kinetics. In an extension of these studies, various Hfr strains were infected after alignment of chromosomal replication, and Mu transposition was shut down early after infection. The positions of integrated Mu copies were inferred from the transfer kinetics of Mu to an F- strain. Our analysis indicated that the location of Mu DNA in the host chromosome was not dependent on the positions of host replication forks at the time of infection. However, the procedure for aligning chromosomal replication affected DNA transfer by various Hfr strains differently, and this effect could account for prior results suggesting preferential integration of Mu at host replication forks.     

Replication control of IncP plasmids

Clones of Escherichia coli with a chromosomally integrated RP4-prime plasmid were isolated and characterized. Chromosome transfer was increased about 50-fold and the Hfr still carried an autonomous plasmid indistinguishable from the original RP4-prime. This could be eliminated by pRP64 or R751, two distinguishably marked incompatible plasmids, giving rise to strains which stably retained the resistance patterns of both plasmids and which continued to transfer the chromosome at enhanced levels. In both cases, however, the copy number of the autonomous plasmid was reduced by the presence of a chromosomal RP4 such that the total number of P plasmid genomes (integrated and autonomous) remained constant. The results are consistent with the idea that copy number is controlled by diffusible inhibitors or initiators of replication.     

Formation of stable Hfr strains in R factor RP1 integration with the chromosome of E. coli K12 recA and their use for R-plasmid selection

Analysis of thermoindependent derivatives of E. coli K12 JC1553 recA (p VD1) carrying a replication thermostable mutant pVD1 of R factor RP1 IncP Ap Km Tc showed that formation of about 5 per cent of them was associated with stable integration of the plasmid with the bacterial chromosome. The respective bacteria had the following features: (1) preserved all the markers of plasmid pVD1, (2) according to the data of the electrophoretic analysis had no extrachromosomal DNA on prolonged cultivation under nonselective conditions, (3) were effective donors of the chromosomal genes, (4) had a low rate of the plasmid marker transfer on crossing with R- recipient. The latter feature was suggested to be used as a test for identification of stable Hfr strains. Investigation of the properties of the transconjugants obtained on crossing of stable Hfr strains with R-recipients rec+ showed that same of them had plasmid DNA with a higher molecular mass as compared to that of plasmid pVD1 DNA. The presence of this DNA was connected with formation of R' plasmid as a result of an irregular exclusion of plasmid pVD1 from the chromosome of stable Hfr bacteria. On the basis of the results a simple method was proposed for selection of R' plasmids having a number of advantages over the classical ones. The perspectives of using thermostable derivatives of RP1 for cloning the chromosome genes are discussed.