Effect of cations,including heavy metals,on cadmium uptake by Lemna polyrhiza L.

Cations, including calcium, magnesium, potassium, sodium, copper, iron, nickel and zinc, inhibited (up to 40%) extracellular binding and intracellular uptake of cadmium by Lemna polyrhiza in solution culture. Test plants showed a high capacity of extracellular cadmium binding which was competitively inhibited by copper, nickel and zinc; however, calcium, magnesium and potassium caused non-competitive inhibition. Iron and sodium increased K _m and decreased V _max, thereby causing mixed inhibition of extracellular binding. Intracellular cadmium uptake displayed Michaelis-Menten kinetics. It was competitively inhibited by calcium, magnesium, iron, nickel and zinc. Monovalent cations (sodium and potassium) caused non-competitive and copper caused mixed inhibition of intracellular cadmium uptake. Thus, high levels of cations and metals in the external environment should be expected to lower the cadmium accumulation efficiency of L. polyrhiza.     

Thiobacillus ferrooxidans response to copper and other heavy metals: growth, protein synthesis and protein phosphorylation

Respirometric experiments demonstrated that the oxygen uptake by Thiobacillus ferrooxidans strain LR was not inhibited in the presence of 200 mM copper. Copper-treated and untreated cells from this T. ferrooxidans strain were used in growth experiments in the presence of cadmium, copper, nickel and zinc. Growth in the presence of copper was improved by the copper-treated cells. However, no growth was observed for these cells, within 190 h of culture, when cadmium, nickel and zinc were added to the media. Changes in the total protein synthesis pattern were detected by two-dimensional polyacrylamide gel electrophoresis for T. ferrooxidans LR cells grown in the presence of different heavy metals. Specific proteins were induced by copper (16, 28 and 42 kDa) and cadmium (66 kDa), whereas proteins that had their synthesis repressed were observed for all the heavy metals tested. Protein induction was also observed in the cytosolic and membrane fractions from T. ferrooxidans LR cells grown in the presence of copper. The level of protein phosphorylation was increased in the presence of this metal.     

Influence of lead,cadmium, and nickel on the growth ofMedicago sativa (L.)

Summary Alfalfa (Medicago sativa L.), cv. Iroquois, was grown in the greenhouse in soils amended with additions of either lead, cadmium, or nickel. Metals, at rates varying from 0–250 ppm, were not uniformly mixed but were placed close to the soil surface so as to simulate surface deposition. In one series of experiments the sulphate salt of each metal and two soils were used. In a second series of experiments the nitrate salts and one soil were used. Neither salt of lead significantly depressed alfalfa yields. Both salts of either cadmium or nickel significantly depressed yields. Additions of all metals to the soil resulted in both increased metal uptake and concentrations in alfalfa tissue, particularly for cadmium and nickel. The highest tissue concentrations of cadmium and nickel were associated with plant stunting and necrosis. However, at rates of 125 ppm and less, substantial increases in cadmium and nickel concentrations were obtained frequently without serious yield reductions. Generally, metal concentrations were greatest in the first harvest following metal application. Concentration and uptake of lead and cadmium were greater when the metal was applied to the soil as nitrate than when applied as the sulphate salt.     

Protective mechanism of sodium molybdate against the acute toxicity of cadmium in rats. II. Prevention of cytoplasmic acidification

In order to clarify the protective mechanism of sodium molybdate against the acute toxicity of cadmium chloride in rat, the effect of in vivo sodium molybdate pretreatment on the cytotoxic action of cadmium in isolated hepatocytes was studied. The cytosolic pH of hepatocytes isolated from untreated rats immediately decreased with incubation in either neutral Hank's balanced salt solution (HBS), pH 7.4, containing 5 µM cadmium chloride minimum or acidic HBS (pH 7.1, 6.8, 6.5, and 6.2). The presence of 5 µM cadmium in HBS adjusted to pH 7.1 aggravated cytosalic acidification induced by the acidic medium alone. Cell viability of hepatocytes incubated in HBS at pH 6.2 was significantly reduced as compared to that of control cells in HBS at pH 7.4, but the presence of cadmium in the acidic HBS had no aggravating action against such a toxic action of the acidic medium although cellular uptake of the metal in the medium increased, as compared to that in HBS at pH 7.4. Molybdenum pretreatment alleviated cytoplasmic acidification induced by the treatment with HBS at pH 7.4 or 7.1 containing cadmium or by extracellular acid load wothout cadmium. This pretreatment also prevented the loss of cell viability induced by the treatment with HBS at pH 6.2 but could not attenuate that when cadmium was present in the medium.These facts suggest that molybdenum pretreatment alleviated the acute toxicity of cadmium in rat by preventing cytoplasmic acidification caused by the harmful metal.     

Effects of essential divalent metals on carcinogenicity and metabolism of nickel and cadmium

Interactions between the physiologically essential metals calcium, magnesium, and zinc and the carcinogenic metals nickel and cadmium were investigated to help elucidate the mechanisms of action of the carcinogenic metals. Bioassay studies revealed several significant findings, including: (1) the ability of magnesium and calcium to inhibit nickel-induced elevation of pulmonary adenoma incidence in strain A mice; (2) the ability of magnesium, but not of calcium, to prevent cadmium-induced subcutaneous sarcoma formation; and (3) the ability of magnesium, but not of calcium, to inhibit nickel-induced muscle tumor formation. Biochemical studies indicated a direct relationship between the antitumorigenic potential of magnesium and the capacity of this metal to: (1) inhibit nickel and cadmium uptake by the target tissues in vivo; (2) inhibit nickel-induced disturbances in DNA synthesis in vivo; (3) inhibit nuclear and cytosolic uptake of nickel by the target tissue cells in vivo; and (4) inhibit nickel and cadmium binding to DNA in vitro. Calcium, which in most cases did not prevent carcinogenesis, had no consistent influence on the uptake of carcinogenic metals or their biochemical effects in the target tissues. Magnesium and zinc, but not calcium, were also found to attenuate the acute toxic effects of nickel, indicating a possible correlation between prevention of acute effects and reduction in tumorigenicity. Zinc, which antagonizes cadmium tumorigenicity in the rat testis, was found to reduce markedly cadmium uptake into isolated testicular interstitial cells. Also, zinc was found to inhibit strongly cadmium binding to DNA in vitro.     

Nickel Bioremediation Potential of Bacillus thuringiensis KUNi1 and Some Environmental Factors in Nickel Removal

The present study endeavors to isolate a nickel (Ni)-resistant bacterial strain from an industrial waste–contaminated soil sample and to characterize the strain with a view to identify it and to assess its ability to remove Ni from the medium or detoxify it. The final objective is to use the strain as an agent to bioremediate Ni contamination. As an outcome, a Ni-resistant bacterial strain (KUNi1) had been isolated from such a soil that could tolerate a maximum of 7.5 and 10 mM Ni concentrations, depending on the type of medium used. The strain also showed multimetal resistance. It was found to be resistant to zinc (Zn), copper (Cu), cobalt (Co), and cadmium (Cd). However, the degree of resistance to the individual metal was variable, as determined by assessing the minimum inhibitory concentration (MIC) of each metal against the strain. The order of resistance was Ni > Zn = Cu = Co > Cd. The strain removed a significant percentage (82%) of Ni from the medium during in vitro culture, whereas dead cell mass had an insignificant role in Ni removal. The quantum of Ni removal by the strain was interfered with when the other metals (Zn, Cu, Co, and Cd) were present either singly with Ni or in combination with other metals. However, the degree of interference varied with individual metal. The factors that influenced the quantum of Ni removal were ambient pH, initial cell density, and presence of other toxic metals. The strain was identified as Bacillus thuringiensis on the basis of its biochemical characteristics and 16s rDNA sequence analysis.     

Biosorption of heavy metals by Bacillus thuringiensis strain OSM29 originating from industrial effluent contaminated north Indian soil

The study was navigated to examine the metal biosorbing ability of bacterial strain OSM29 recovered from rhizosphere of cauliflower grown in soil irrigated consistently with industrial effluents. The metal tolerant bacterial strain OSM29 was identified as Bacillus thuringiensis following 16S rRNA gene sequence analysis. In the presence of the varying concentrations (25–150 mgl⁻¹) of heavy metals, such as cadmium, chromium, copper, lead and nickel, the B. thuringiensis strain OSM29 showed an obvious metal removing potential. The effect of certain physico-chemical factors such as pH, initial metal concentration, and contact time on biosorption was also assessed. The optimum pH for nickel and chromium removal was 7, while for cadmium, copper and lead, it was 6. The optimal contact time was 30 min. for each metal at 32 ± 2 °C by strain OSM29. The biosorption capacity of the strain OSM29 for the metallic ions was highest for Ni (94%) which was followed by Cu (91.8%), while the lowest sorption by bacterial biomass was recorded for Cd (87%) at 25 mgl⁻¹ initial metal ion concentration. The regression coefficients obtained for heavy metals from the Freundlich and Langmuir models were significant. The surface chemical functional groups of B. thuringiensis biomass identified by Fourier transform infrared (FTIR) were amino, carboxyl, hydroxyl, and carbonyl groups, which may be involved in the biosorption of heavy metals. The biosorption ability of B. thuringiensis OSM29 varied with metals and was pH and metal concentration dependent. The biosorption of each metal was fairly rapid which could be an advantage for large scale treatment of contaminated sites.     

Heavy metal uptake capacity of fresh water algae (Oedogonium westti) from aqueous solution: A mesocosm research

The green macroalgae present in freshwater ecosystems have attracted a great attention of the world scientists for removal of heavy metals from wastewater. In this mesocosm study, the uptake rates of heavy metals such as cadmium (Cd), nickel (Ni), chromium (Cr), and lead (Pb) by Oedogonium westi (O. westti) were measured. The equilibrium adsorption capabilities of O. westti were different for Cd, Ni, Cr, and Pb (0.974, 0.418, 0.620, and 0.261 mgg^–1, respectively) at 18°C and pH 5.0. Furthermore, the removal efficiencies for Cd, Cr, Ni and Pb were observed from 55–95%, 61–93%, 59–89%, and 61–96%, respectively. The highest removal efficiency was observed for Cd and Cr from aqueous solution at acidic pH and low initial metal concentrations. However, the removal efficiencies of Ni and Pb were higher at high pH and high concentrations of metals in aqueous solution. The results summarized that O. westti is a suitable candidate for removal of selected toxic heavy metals from the aqueous solutions.     

Biosorption of lead, cadmium, and zinc by Citrobacter strain MCM B-181: characterization studies

The biosorption process for removal of lead, cadmium, and zinc by Citrobacter strain MCM B-181, a laboratory isolate, was characterized. Effects of environmental factors and growth conditions on metal uptake capacity were studied. Pretreatment of biomass with chemical agents increased cadmium sorption efficiency; however, there was no significant enhancement in lead and zinc sorption capacity. Metal sorption by Citrobacter strain MCM B-181 was found to be influenced by the pH of the solution, initial metal concentration, biomass concentration, and type of growth medium. The metal sorption process was not affected by the age of the culture or change in temperature. Equilibrium metal sorption was found to fit the Langmuir adsorption model. Kinetic studies showed that metal uptake by Citrobacter strain MCM B-181 was a fast process, requiring <20 min to achieve >90% adsorption efficiency. The presence of cations reduced lead, zinc, and cadmium sorption to the extent of 11. 8%, 84.3%, and 33.4%, respectively. When biomass was exposed to multimetal solutions, metals were adsorbed in the order Co2+ < Ni2+ < Cd2+ < Cu2+ < Zn2+ < Pb2+. Among various anions tested, only phosphate and citrate were found to hamper metal sorption capacity of cells. Biosorbent beads prepared by immobilizing the Citrobacter biomass in polysulfone matrix exhibited high metal loading capacities. A new mathematical model used for batch kinetic studies was found to be highly useful in prediction of experimentally obtained metal concentration profiles as a function of time. Metal desorption studies indicated that Citrobacter beads could, in principle, be regenerated and reused in adsorption-desorption cycles. In an expanded scale trial, biosorbent beads were found to be useful in removal/recovery of metals such as lead from industrial wastewaters.     

Isolation of a naturally-occurring nickel resistance plasmid from a rare hypersaline estuary (Laguna Madre,Texas, USA) for potential use as a bio-indicator of metal contamination

Metal-resistant bacteria were isolated from sediments of the Laguna Madre, a rare hypersaline estuary impacted by many anthropogenic compounds, including various metals and metalloids. Bacteria were initially isolated on nutrient agar supplemented with NaCl; random isolates (n = 100) were tested for metal resistance toward zinc, nickel, chromium, and cadmium using a pour plate disc assay. Metal-resistant cultures were assayed for plasmids that contained naturally-occurring heavy metal resistance genes. Putative metal-resistance plasmids were tested for metal-resistance efficacy by transforming a metal-sensitive strain of Escherichia coli. Polymerase Chain Reaction (PCR) primers were designed to detect cnrA, part of a nickel–cobalt resistance gene cluster, and restriction endonuclease digests were performed to detect restriction sites within the plasmid. Results showed that many bacterial isolates tested were resistant toward most of the metals used in this study. Among tested bacteria cultures, 34 were resistant to zinc, 64 were resistant to chromium, and 51 resistant to cadmium. Only 8 cultures were resistant to nickel; however, most bacteria were found to be resistant to more than one metal. Several plasmids were found from the bacteria isolates. One plasmid, designated pDZ5, was isolated from a bacterium identified as Bacillus pumilus by 16S rRNA sequencing. Plasmid pDZ5 conferred nickel resistance to the metal-sensitive E. coli strain and was found to contain cnrA as confirmed by PCR amplification. Plasmid pDZ5 was successfully cut with restriction enzymes for potential ligation with reporter genes. The presence, abundance and expression of pDZ5 may prove to be a useful bio-indicator of metal contamination, specifically nickel pollution, in the Laguna Madre due to the fewer number of bacteria that were nickel-resistant compared to other metals.     

Biosorption of heavy metals by Fucus spiralis

The sorption uptake of cadmium, nickel, zinc, copper and lead by marine brown alga Fucus spiralis was investigated in bimetallic, trimetallic and multimetallic solutions. The experimental data fitted very well to Langmuir model. In bimetallic systems, the affinity of biomass for lead and copper increased and the sorption uptake of these metals was not affected by increasing concentrations of cadmium, nickel or zinc. However, in solutions with both metals there was a significant mutual decrease of their sorption levels at high concentrations of the other metal. The sorption uptake of cadmium, nickel and copper was investigated in trimetallic aqueous systems. Based on the kinetic parameter b, the affinity of F. spiralis for copper was considerably higher than for cadmium or nickel: bCd=6.39, bNi=1.82 and bCu=17.89. In all tests, the maximum sorption uptake remained practically constant around 1 mmol/g, indicating that the number of active sites on the biomass was limited. Tests with four and five metals showed that copper was preferentially adsorbed. The differences between the experimental sorption data and those given by the chemical speciation program PHREEQCI were negligible. In general, the software used provided satisfactory estimated data for each metal and hence can be a useful tool to predict or simulate the real process.     

Investigation of Vetiver Grass Capability in Phytoremediation of Contaminated Soils with Heavy Metals (Pb,Cd, Mn,and Ni)

ABSTRACT

Soil contamination with heavy metals has become a worldwide concern. A sustainable technology to mitigate heavy metal contamination is extremely important. Phytoremediation is a cost-effective method, environmentally friendly, and esthetically pleasing. The aim of this study was to investigate the potential of Vetiver phytoremediation of soils contaminated with heavy metals. This research was conducted as a factorial design with four different heavy metals (lead, cadmium, manganese, and nickel) with three varying levels and also three replications for each treatment. Statistical analysis of data was performed using SPSS19 software and analysis of variance, Duncan and Pearson correlation tests. The results showed that, the highest uptake rate was related to lead metal with 282.45 mg/kg of dry soil and 83.4% uptake percentage. Then, the mean and percentage of adsorption for cadmium, nickel and manganese were 248.3 mg/kg (53.2%), 69.4 mg/kg (65.5%), and 63.29 mg/kg (61%), respectively. Lead was found to be the main component of uptake by Vetiver plant. It was found that the roots of the plant have absorbed more heavy metals than the shoots. And at the roots in total 1089.05 and on average 363.01 mg/kg and at the shoots 901.19 and on average 300.39 mg/kg, the metals used were adsorbed on three levels and four treatments. The results of analysis of variance, Duncan test and Pearson correlation showed that the effect of applied treatments on lead uptake in roots and shoots increased significantly (P ≤ 0.05) with increasing levels of treatments. The biological concentration factor was more than one, and the transfer factor was close to one. Therefore, it can be used as a phytostablization plant. The results showed that Vetiver can be considered as a refining plant due to its vegetative characteristics, cost-effectiveness and high adaptation to environmental conditions.     

Cadmium biosorption by <Emphasis Type="Italic">Bacillus</Emphasis><Emphasis Type="Italic"> circulans</Emphasis> strain EB1

Summary A heavy metal resistant bacterium, Bacillus circulans strain EB1 showed a high cadmium biosorption capacity coupled with a high tolerance to this metal when grown in its presence. Bacillus circulans EB1 cells grown in the presence of 28.1 mg cadmium/l were capable of removing cadmium with a specific biosorption capacity of 5.8 mg Cd/g dry wt biomass in the first 8 h. When the cells were pre-conditioned with low concentrations of cadmium in pre-grown medium, the uptake was increased to 6.7 mg Cd/g dry wt biomass. The maximum uptake of␣cadmium was during mid-logarithmic phase of growth. The resting cells (both wet and dry) of EB1 were also able to biosorb cadmium. Specific biosorption capacities of wet and dry biomass were 9.8 and 26.5 mg Cd/g dry wt biomass, respectively. Maximum cadmium removals by both wet and dry cells were at pH 7.0. The results showed that the cadmium removal capacity of resting cells was markedly higher than that of growing cells. Since both growing and resting cells had a high biosorption capacity for cadmium, EB1 cells could serve as an excellent biosorbent for removal of cadmium from natural environments.     

Sorption of Heavy Metals to the Filamentous Bacterium Thiothrix Strain A1

A study was undertaken to determine the ability of the filamentous bacterium Thiothrix strain A1 to sorb heavy metals from solution. Cells of Thiothrix strain A1 were harvested, washed, and suspended in solutions of metals. After an equilibration period, biomass was separated from solution and the metal content in acid-digested cells and/or filtrates was determined by atomic absorption spectrophotometry. Sorption of nickel and zinc was very rapid; most of the sorbed metal was bound in less than 10 min. The sorption data for copper fit the Freundlich isotherm, and nickel and zinc data fit biphasic Freundlich isotherms. Sorption of both nickel and zinc was dependent on cell age. Cells harvested 24 h after inoculation sorbed approximately one-half of the amount of metal per gram cell protein than did cells harvested after 48, 72, or 96 h. Calcium and magnesium effectively competed with zinc for binding sites, whereas potassium had only a slight effect on the capacity of cells to sorb zinc. The primary mechanism of metal sorption apparently was ion exchange, because 66 to 75% of nickel or zinc could be desorbed by placing metal-laden cells in a solution of 5 mM CaCl₂. A competition experiment with nickel and zinc indicated that both metals occupied the same sorption sites. The strong chelating agents EDTA and NTA effectively prevented metal uptake, but lactate enhanced the uptake of nickel. Thiothrix strain A1 grown in nickel-containing medium had a relatively low uptake of nickel compared with uptake by resting cells suspended in a simple buffer solution.     

Phytoremediation potential of Lemna minor L. for heavy metals

Phytoremediation potential of L. minor for cadmium (Cd), copper (Cu), lead (Pb), and nickel (Ni) from two different types of effluent in raw form was evaluated in a glass house experiment using hydroponic studies for a period of 31 days. Heavy metals concentration in water and plant sample was analyzed at 3, 10, 17, 24, and 31 day. Removal efficiency, metal uptake and bio-concentration factor were also calculated. Effluents were initially analyzed for physical, chemical and microbiological parameters and results indicated that municipal effluent (ME) was highly contaminated in terms of nutrient and organic load than sewage mixed industrial effluent (SMIE). Results confirmed the accumulation of heavy metals within plant and subsequent decrease in the effluents. Removal efficiency was greater than 80% for all metals and maximum removal was observed for nickel (99%) from SMIE. Accumulation and uptake of lead in dry biomass was significantly higher than other metals. Bio-concentration factors were less than 1000 and maximum BCFs were found for copper (558) and lead (523.1) indicated that plant is a moderate accumulator of both metals. Overall, L. minor showed better performance from SMIE and was more effective in extracting lead than other metals.     

Interactions between a soil fungus,Trichoderma harzianum,and IIb metals—adsorption to mycelium and production of complexing metabolites

Fungi are capable of accumulating metals and, in soil, such accumulation may influence metal speciation and transport. The interactions between a common soil fungus, Trichoderma harzianum, and IIb elements were studied in the present investigation. The accumulation of the metals zinc, cadmium and mercury by starved and non-starved mycelium at different pH was determined by a batch technique using radioactive tracers; uptake of the metals was found to be large, with respective distribution coefficients of about 10^3.5, 10^2.5 and 10^4.0 for zinc, cadmium and mercury, respectively. Metal accumulation by a starved system was largely independent of pH in the range 3–9, where in a non-starved system an increased accumulation of zinc (at 10^– m) was observed at low pH (3–5). Potentiometric titrations performed on the two systems revealed significant differences in acid capacities, i.e. values close to zero for the starved system and 500–800 meq kg^– for the non-starved system. The maximum metal uptake was at least 50 mmol kg^– at pH 6.5 (calculated from adsorption isotherms). The present findings suggests that in the non-starved system a metabolite is produced and then released when the pH is within a certain range.     

Metallothionein induction in human peripheral blood lymphocytes by heavy metals

Human peripheral blood lymphocytes have the capacity to produce metallothioneins (MTs) as a protective response to cadmium exposure. To define the range of metal species inducing lymphocyte MTs, cellular proteins synthesized after exposure to each of 11 heavy metals were analyzed by gel electrophoresis. Toxic metals such as cadmium, mercury and silver were found to induce thioneins (apoproteins of MTs) at relatively low concentrations (maximum at approximately 10 microM), whereas less toxic metals such as zinc, copper and nickel were inductive at relatively high concentrations (maximum at approximately 200 microM). Tin, lead, iron, cobalt, and manganese did not induce thioneins. The heavy metal specificity of MT induction in the lymphocyte resembles that in the liver, and the regulatory mechanism of MT production seems to be similar in both of these tissues. In the cells exposed to highly toxic metals such as cadmium and mercury, expression of cytotoxicity (represented by decline of cysteine uptake) was remarkable at the metal concentrations higher than those saturating thionein induction, supporting the protective role of MTs against heavy metals.     

Dark septate endophyte (DSE) fungi isolated from metal polluted soils: Their taxonomic position, tolerance, and accumulation of heavy metals In Vitro

To understand the possible role of the plant root associated fungi on metal tolerance, their role in the uptake of heavy metals and the potential transfer of these metal ions to the plant, three strains of dark septate endophytic (DSE) fungi were isolated from a waste smelter site in southwest China, and one strain was isolated from a non-contaminated site. According to molecular phylogenetic analysis of the ITS 1-5.8S rDNA-ITS 2 gene regions and morphological characteristics, one is identified as Exophiala pisciphila, and the other three are non-sporulating fungi under the experiment condition with the nearest phylogenetic affinities to the Thysanorea papuana strain EU041814. Tolerance and accumulation abilities of the three DSE strains for metals were investigated in liquid culture. Minimum inhibitory concentrations (MIC) of Pb, Zn, and Cd were determined. It was demonstrated that the tolerance of the DSE strains varied between metal species and strains. The E. pisciphila strain is able to accumulate lead and cadmium over 20% and 5% of dry weight of biomass, respectively. Partial of the sequestrated metals can be washed with CaCh. Morphological and enzyme activity changes taking place in the presence of excessive Pb, Cd, and/or Zn also indicate that the mechanism of heavy metal tolerance and accumulation of the DSE strains would be a complex process. The findings indicated promising tolerance and accumulation of the DSE strains with potential values in metal cycling and restoration of soil and water system.     

Function of a Novel Cadmium-Induced YodA Protein in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Cells of Escherichia coli increase greatly the synthesis of a small primarily cytoplasmic protein as soon as the cell growth rate falls below the maximal growth rate supported by cadmium exposure, after which the mature product is exported to the periplasm. This protein was previously identified as the product of the E. coli yodA open reading frame. We now report the isolation of an E. coli mutant defective in YodA synthesis because of insertional inactivation of the corresponding gene. In experiments to test the ability of both the wild-type and yodA mutant E. coli cells to bind cadmium, we have used γ-labeled [¹⁰⁹Cd]. Whereas the wild-type E. coli strain was able to bind metal, the yodA mutant strain failed to do so. In addition, analysis of such a mutant demonstrated that it grows at a rate distinguishable from that of the isogenic parent in the presence of cadmium ions. However, challenging cells with hydrogen peroxide and additional metals such as zinc, copper, cobalt, and nickel did not significantly affect the growth rate of the mutant. This growth phenotype was found to be the result of the loss of its ability to bind cadmium. These results suggest that the role of YodA protein might be to decrease the concentration level of cadmium ions in E. coli cells during cadmium stress by its ability to bind heavy metal.     

Heavy-metal ion uptake by plants from nutrient solutions with metal ion,plant species and growth period variations

Summary Rape, cucumber, wheat, oats and tomato were grown for one to two weeks in nutrient solutions with heavy metals added. Of the metal ions tested (Cr³⁺, Cu²⁺, Co²⁺, CrO₄ ^2-, Ni²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Zn²⁺ and Ag⁺), manganese, nickel and lead exhibited the greatest mobility in cucumber plants, which resulted in the highest shoot/root concentration ratio. Silver was not translocated to the shoots of cucumber plants in measurable amounts.When the plants were grown with 1.0, 10 and 100 M cadmium or nickel in the solution, the shoot and root concentration increased 5–10 times if the metal ion concentration of the solution was increased 10 times.The plants showed great differences in cadmium and nickel uptake. In the shoot, the cadmium concentration increased in the order: oats = wheat < cucumber = rape < tomato, and in the root in the order: oats = wheat < cucumber = rape < tomato. The great uptake of cadmium and nickel by tomato is notable and agrees with other reports.The nickel, and especially the cadmium, concentration in roots and shoots increases with the age of the plant.The results are discussed and related to other investigations. The need for research on the uptake mechanisms of non-essential heavy metals is emphasized. re]19750415