In vitro chromosome doubling of nineZantedeschia cultivars

Tetraploid plants have been produced from nineZantedeschia cultivars usingin vitro colchicine treatment. Rapidly-multiplying shoot cultures were treated on a medium containing 0.05% colchicine for 1, 2 or 4 days to induce chromosome doubling. Following the treatment, most shoots were killed but the surviving shoots were multiplied for several subcultures. These shoots were then rootedin vitro and transferred to a greenhouse. Plants were screened 2 months later by measuring stomatal length, and 110 out of 565 plants were selected as putative tetraploids with a stomatal length significantly greater than in diploid control plants. Chromosome counts were carried out on root tips from 44 plants and confirmed that 38 were tetraploids, 2 were chimeras (predominantly tetraploid with a few octoploid cells), and 4 were diploids. Stomatal length has been rechecked in mature tetraploid plants of the cultivar Black Magic, demonstrating that stomatal length is a good indicator of ploidy level inZantedeschia. This study has shown that multiplying colchicine-treated shootsin vitro for several subcultures prior to transfer to soil produced very few chimeras. The stomatal length measurements are non-destructive and allow the rapid screening of a population for tetraploids.     

Colchicine and oryzalin mediated chromosome doubling in different genotypes of Miscanthus sinensis

Different explant materials were treated with antimitotic agents to induce chromosome doubling in several Miscanthus sinensis clones. In vitro propagated plants established in soil, in vitro shoots, embryogenic callus, shoot apices and leaf explants were treated with different concentrations of colchicine or oryzalin. No tetraploids were obtained after antimitotic treatment of plants established in soil. The percentage of chromosome doubled plants after antimitotic treatment of single in vitro shoots was genotype dependent. Rooted in vitro plantlets were not a suitable target for antimitotic treatment, due to a high frequency of ploidy chimeras. Many tetraploid plants were regenerated after antimitotic treatment at the callus and explant level, but the efficiency was genotype dependent, primarily due to differences in the ability to form regenerable callus and to regenerate plants from embryogenic callus. Treatment of shoot apices with colchicine was the most efficient and reproducible system in the four genotypes tested. It was possible to repeatedly use the same colchicine-containing medium without any reduction in the induction of regenerable callus or in the percentage of tetraploids, thereby minimising the handling of this very toxic compound.     

In vitro induction of tetraploid in pomegranate (Punica granatum)

Tetraploid plants were obtained in pomegranate (Punica granatum L. var. `Nana') by colchicine treatment of shoots propagated in vitro. Shoots cultured on MS medium supplemented with 10 mg l^–1 colchicine, 1.0 mg l^–1 BA and 0.1 mg l^–1 NAA for 30 days produced tetraploids at a high frequency of 20%. No tetraploids were detected by treating the shoots in 5000 mg l^–1 colchicine for 114 h. Shoots treated by 5000 mg l^–1 colchicine for 96 h produced three morphological mutants with narrow leaves, which were later confirmed as mixoploids that separated into diploids and tetraploids after further subculture. In vitro tetraploid plants had shorter roots, wider and shorter leaves than the diploid ones. Tetraploid pomegranate plants grew and flowered normally in pots, but possessed flowers with increased diameter and decreased length compared to diploids. The number of pollen grains per anther was higher in tetraploids, but the viability of pollen decreased significantly.     

In vitro tetraploid induction and generation of tetraploids from mixoploids in hop (Humulus lupulus L.)

This paper describes an efficient colchicine-mediated technique for the in vitro induction of hop tetraploids and its confirmation by flow cytometry. A window of conditions generated a high percentage (>20%) of tetraploid induction, with the highest induction (25.6%) achieved with 0.05% colchicine for 48 h. Colchicine-induced tetraploids remained stable after 6 months in soil. Leaf characteristics of diploid and tetraploid hops were compared, and it was determined that stomatal length and width are suitable parameters for identifying putative hop tetraploids. As well as generating tetraploids, this technique generates mixoploid hops. Calli, derived from mixoploid leaves, were induced to form shoot buds and shoots. Individual shoots were classed as diploid, mixoploid or tetraploid after screening by flow cytometry. This callus-based technique can be employed when a genome-doubling agent generates mixoploids but fails to generate tetraploids.     

In vitro induction and identification of tetraploid plants of <Emphasis Type="Italic">Paulownia tomentosa</Emphasis>

Polyploidization is a major trend in plant evolution that has many advantages over diploid. In particular, the enlargement and lower fertility of polyploids are very attractive traits in forest tree breeding programs. We report here a system for the in vitro induction and identification of tetraploid plants of Paulownia tomentosa induced by colchicine treatment. Embryonic calluses derived from placentas were transferred to liquid Murashige and Skoog (MS) medium containing different concentrations of colchicine (0.01, 0.05, or 0.1%) and incubated for 24, 48, or 72 h on an orbital shaker at 110 rpm. The best result in terms of the production of tetraploid plantlets was obtained in the 48 h + 0.05% colchicine treatment, with more than 100 tetraploid plantlets being produced. The ploidy level of plantlets was verified by chromosome counts, flow cytometry, and morphology. The chromosome number of tetraploids was 2n = 4x = 80 and that of diploid plantlets was 2n = 2x = 40. The relative fluorescence intensity of tetraploids was twofold higher than that of diploids. The tetraploid and diploid plantlets differed significantly in leaf shape, with those of the former being round and those of the latter pentagonal. The mean length of the stomata was longer in tetraploid plants than diploid plants, and stomatal frequency was reduced with the increased ploidy level. The tetraploids had large floral organs that were easily distinguishable from those of diploid plants.     

In vitro induction of tetraploids in an interspecific hybrid of Calanthe (Calanthe discolor × Calanthe sieboldii) through colchicine and oryzalin treatments

Tetraploids were successfully produced from diploid seeds obtained through interspecific crossing between Calanthe discolor and Calanthe sieboldii by treating with colchicine or oryzalin. Colchicine was tested at concentrations of 0.05 and 0.1 % for 0, 3, or 7 days and oryzalin was tested at a concentration of 0.003 % for 1, 2, 4, and 7 days, and the ploidy of the seedlings was determined by flow cytometry. Tetraploids (4×) were obtained from the interspecific hybrid seeds treated with all colchicine and oryzalin concentrations. The most efficient condition for inducing tetraploids seemed to be treated with 0.003 % oryzalin for 1 or 2 days. Cytological and morphological evidence confirmed the results of flow cytometric analysis. The stomatal density and sizes of the tetraploid plants were significantly higher and larger than those of the diploid plants. Differences in leaf shape were found between the tetraploid and diploid plants under the same growing conditions: the leaves of the diploids were elongated and those of the tetraploids were round.     

Induction of tetraploidy in Buddleia globosa

The aim was to produce a tetraploid form of Buddleia globosa to facilitate introgression of yellow flower colour into B. davidii, which is naturally tetraploid. Protocols were established for the micropropagation of B. globosa and tetraploid plants were obtained by application in vitro of colchicine to pre-cultured excised nodal sections. Three concentrations of colchicine were applied (0.01%, 0.05% and 0.1% w/v) for 1, 2 or 3 days. At 0.01% tetraploids were produced only after 2 days of application. All other treatments produced at least one tetraploid. The colchicine technique was extremely effective: of 29 lines tested, 19 were tetraploid and 5 were mixoploid. The vegetative characteristics of these tetraploids are described and the flowering characteristics of the three that flowered. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effects of colchicine on polyploidy induction of Buddleja lindleyana seeds

Buddleja lindleyana Fort. is a garden ornamental plant with great potential for development and also a commonly used medicinal plant. To enrich its germplasm resources, the seeds of B. lindleyana were treated with colchicine solution with concentration gradients of 0.5%, 1.0%, 1.5%, 2.0% and 3.0% for 12-, 24- and 48-h respectively, and the water treatment was set as the control group. The purpose was to explore the effects of colchicine on the germination and mutagenic effect of B. lindleyana seeds at different concentrations and different times, to screen the appropriate combination of mutagenic concentration and time, to provide guidance for the construction of B. lindleyana mutation population in future research. The results were as follows: (1) Colchicine had an inhibitory effect on seed germination and seedling height of B. lindleyana seeds, and the higher the concentration, the more obvious the inhibitory effect. (2) After colchicine treatment, 30 mutant plants showed morphological variations such as leaf malformation, leaf color macular, early leaf bud germination, uneven leaf surface and leaf hyperplasia, among which 3.0%?+?48-h treatment group had great potential to produce yellow-leaf plants. (3) Detection and analysis by flow cytometry revealed that among the 30 morphologically variant plants, there were 22 diploid plants, 3 tetraploid plants, and 5 chimera plants. Among them, tetraploids were mainly from colchicine concentration of 3.0% (2 plants) and 1.5% (1 plant), chimeras were mainly from colchicine concentration of 1.0% (2 plants), 1.5% (1 plant) and 3.0% (2 plants), and the seed soaking time was 48-h. (4) The length and width of guard cells and stomata were significantly different between diploid and tetraploid, and there were significant differences in leaf width and leaf shape index between tetraploid and diploid, but there were no significant differences in leaf length among diploid, tetraploid and chimera. In short, we got tetraploids and chimeras materials which were potentially useful cultivars of B. lindleyana and provided an effective identification method for polyploids of B. lindleyana.

     

In vitro induction of polyploidy in japanese quince (Chaenomeles japonica)

In vitro conditions for Japanese quince polyploidisation were investigated. Microshoots and isolated cotyledons were treated with colchicine and oryzalin. Morphogenesis was more dependent on the concentration of colchicine or oryzalin than on the duration of exposure, genotype differences were observed. Low oryzalin concentrations had no impact on morphogenesis. Plants with changed chromosome numbers were obtained at 0.25–38 mM colchicine and 10–50 μM oryzalin concentrations. It was determined that stomata length is a suitable parameter for identifying putative Japanese quince tetraploids. Stomata of tetraploid shoots of the same clone were approximately 1/3 longer than in the diploids. It was shown that through polyploidisation gigas effect was not obtained in fruit size but tetraploids have reduced seed set and an increased proportion of fruit flesh.     

Why only tetraploid Solidago gigantea (Asteraceae) became invasive: a common garden comparison of ploidy levels

Many studies have compared the growth of plants from native and invasive populations, but few have considered the role of ploidy. In its native range in North America, Solidago gigantea Aiton (Asteraceae) occurs as a diploid, tetraploid and hexaploid, with considerable habitat differentiation and geographic separation amongst these ploidy levels. In the introduced range in Europe, however, only tetraploid populations are known. We investigated the growth performance and life history characteristics of plants from 12 European and 24 North American (12 diploid, 12 tetraploid) populations in a common garden experiment involving two nutrient and two calcium treatments. Twelve plants per population were grown in pots for two seasons. We measured 24 traits related to leaf nutrients, plant size, biomass production and phenology as well as sexual and vegetative reproduction. Native diploid plants had a higher specific leaf area and higher leaf nutrient concentrations than native tetraploids, but tetraploids produced many more shoots and rhizomes. Diploids grown with additional calcium produced less biomass, whereas tetraploids were not affected. European plants were less likely to flower and produced smaller capitulescences than North American tetraploids, but biomass production and shoot and rhizome number did not differ. We conclude that a knowledge of ploidy level is essential in comparative studies of invasive and native populations. While clonal growth is important for the invasion success of tetraploid S. gigantea, its potential was not acquired by adaptation after introduction but by evolutionary processes in the native range.     

Influence of ploidy level on morphology,growth and drought susceptibility in <Emphasis Type="Italic">Spathiphyllum wallisii</Emphasis>

In this study, we analysed morphological, anatomical and physiological effects of polyploidisation in Spathiphyllum wallisii in order to evaluate possible interesting advantages of polyploids for ornamental breeding. Stomatal density was negatively correlated with increased ploidy level. Stomatal size increased in polyploids. Tetraploid Spathiphyllum plants had more ovate and thicker leaves. The inflorescence of tetraploids had a more ovate and thicker spathum, a more cylindrical spadix and a thicker but shorter flower stalk. Biomass production of the tetraploids was reduced, as expressed by lower total dry weights, and tetraploids produced fewer shoots and leaves compared with their diploid progenitors. Furthermore, tetraploid Spathiphyllum plants were more resistant to drought stress compared with diploid plants. After 15 days of drought stress, diploids showed symptoms of wilting, while the tetraploids showed almost no symptoms. Further, measurements of stomatal resistance, leaf water potential, relative water content and proline content indicated that the tetraploid genotypes were more resistant to drought stress compared with the diploids.     

<Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of protocorm-like bodies in <Emphasis Type="Italic">Cattleya</Emphasis>

A protocol for in vitro induction of crape myrtle tetraploids using nodes from in vitro-grown shoots (2n = 48) was established. Nodal buds were excised from in vitro-grown shoots, maintained on proliferation medium containing Murashige and Skoog medium supplemented with 4.44 μM 6-benzyladenine , 0.54 μM α-naphthaleneacetic acid, and treated with a range of concentrations of colchicine under three different conditions. Nodal bud explants treated in liquid proliferation medium supplemented with either 15 or 20 mM colchicine for 24 h turned necrotic and died; whereas, those cultured on solid proliferation medium supplemented with either 125 or 250 μM colchicine for 30 days survived, but no tetraploid plants were obtained. However, when explants were cultured in liquid proliferation medium containing 250, 500 or 750 μM colchicine for 10 days, tetraploid plants (2n = 96) were obtained. Incubation of explants in medium containing 750 μM colchicine promoted the highest frequency of survival (40%) of explants and of recovered tetraploids (60%). Morphological and anatomical characteristics of leaves, including leaf index, stomata size and number, stomata index (length/width), and number of chloroplasts in guard cells correlated with ploidy of crape myrtle plants. The number of chloroplasts in guard cells of stomata was a stable and reliable marker in discriminating plants of different ploidy levels. Chromosome counts and flow cytometry confirmed these findings.     

Use of fluorescein diacetate (FDA) to determine ploidy of in vitro watermelon shoots

Ploidy of watermelon [Citrullus lanatus (Thunb.) Matsum. and Nakai shoots and plantlets was estimated by painting the lower epidermis of intact in vitro-derived leaves with fluorescein diacetate (FDA) and observing fluorescence of guard cell chloroplasts with a microscope and UV light. Leaves from in vitro shoot-tip cultures of known diploid cultivars and tetraploid breeding lines were used to establish the mean number of chloroplasts per guard cell pair. Leaves from diploid and tetraploid shoot cultures had 9.7 and 17.8 chloroplasts per guard cell pair, respectively. This method then was used to estimate the ploidy of shoots regenerated from cotyledon explants of the diploid cultivar Minilee. Approximately 11% of the 188 regenerated shoots were classified as tetraploid during in vitro culture. Putative tetraploids were transplanted to the field and self-pollinated. About 45% of tetraploids identified in vitro produced fruit and viable seed. Chloroplast counts of R₁ progeny were used to confirm their ploidy. All of the putative diploids were confirmed diploid and all putative tetraploids proved to be non-chimeric true breeding tetraploids. This revised version was published online in June 2006 with corrections to the Cover Date.     

Induction of tetraploidy in Juncus effusus by colchicine

Tetraploidy was induced in vitro in mat rush (Juncus effusus L.) cultivar Nonglin-4 by exposure to colchicine (0, 50, 100 and 500 mg dm^?3) for 6, 12 and 24 h. Flow cytometric analysis was used to confirm the ploidy level. Anatomical and ultrastructural analyses at cellular and subcellular levels in tetraploid and diploid control plants revealed differences between diploid and tetraploid plants. The leaf epidermis had larger stomata but lower stomatal density in tetraploid plants. In addition, mesophyll cells in tetraploid plants appeared more compact and showed less intercellular spaces along with increased size of vascular bundles. However, a significant reduction of chlorophyll content was observed in tetraploid plants that might be the result of structural modification in the lamellar membranes of chloroplasts.     

Morphological, physiological, cytological and phytochemical studies in diploid and colchicine-induced tetraploid plants of Echinacea purpurea (L.)

Echinacea purpurea (L.) is one of the important medicinal plant species. To obtain the tetraploid plants of Echinacea purpurea with improved medicinal qualities, the root tips of two true leaves seedlings were imbibed in 0.25 % (w/v) colchicine solution for 24, 48, 72, 96 and 168 h. The ploidy level of plants was determined by chromosome counting of root tip cells, and confirmed by flow cytometric analysis. Tetraploid induction occurred in seedlings treated for 24, 48 and 72 h at colchicine solution. The morphological, physiological, cytological, and phytochemical characteristics of diploid and colchicine-induced tetraploid plants were compared. Results indicated that tetraploid plants had considerable larger stomata, pollen grain, seed and flower. Moreover, chloroplast number in guard cells, amount of chlorophyll (a, b, and a + b), carotenoids as well as width and thickness of leaves were increased in tetraploids. However, stomata frequency, leaf index, plant height, and quantum efficiency of photosystem II in tetraploid were lower than diploid plants. High-performance liquid chromatography analysis showed that leaves of the tetraploid plants had more cichoric acid (45 %) and chlorogenic acid (71 %) than diploid plants. It was concluded that morphological and physiological characteristics can be used as useful parameters for preliminary screening of putative tetraploids in this species.     

In vitro tetraploidization for the augmentation of wedelolactone in <Emphasis Type="Italic">Sphagneticola calendulacea</Emphasis> (L.) Pruski

A practical and reliable method for in vitro tetraploidization of Sphagneticola calendulacea (L.) Pruski [synonym Wedelia chinensis (Osbeck) Merrill] has been established to enhance the production of wedelolactone. Shoot tip and nodal explants from in vitro-grown culture (2n?=?50) were exposed to the antimitotic chemical, i.e., colchicine, at various concentrations (0, 0.025, 0.05, 0.1, 0.3, and 0.5%; w/v) for 12, 24, 36, 48, and 60 h. The treated explants were then incubated and proliferated on Murashige and Skoog (MS) medium fortified with 0.2 mg l^?1 thidiazuron and 0.05 mg l^?1 naphthalene acetic acid, followed by root induction in 1.0 mg l^?1 indole-3 acetic acid enriched ½MS medium. Treatment of shoot tips with 0.05% colchicine for 24 h supported the maximum rate of survival (63.33%) of explants as well as tetraploid induction (42.93%). Morphological, stomatal, and cytological characteristics along with the secondary metabolite content of the in vitro tetraploids were compared to that of diploids. The recovered tetraploid plants possessed superior plant height, stem diameter, leaf size, root number, and increased length and width of stomata but decreased stomatal frequency. The tetraploid plants demonstrated twice the chromosome number (2n?=?4x?=?100) than the diploids as confirmed through cytology, spectrophotometry and flow cytometry. High-performance thin-layer chromatography showed a significant enhancement in the wedelolactone content of tetraploid plants (541.48 µg g^?1 of dried sample) in comparison to diploid plants (325.43 µg g^?1 of dried sample), signifying the prospective of this technique for the trade value improvement.     

In vitro induction of tetraploids in Arachis paraguariensis

In this study, an efficient procedure was established for successful induction of tetraploid Arachis paraguariensis by treating diploid explants with colchicine. Quartered-seed, callus and shoot-tips were treated with colchicine at concentrations of 0.05, 0.1, 0.2 and 0.5?% (w/v) for 4, 8, 16, 20 and 24?h before they were transferred unto modified Murashige and Skoog medium for either callus induction or shoot regeneration. Results showed that quartered-seed displayed the highest frequency of in vitro plantlet regeneration and tetraploid induction, as well as the lowest mortality rate. Flow cytometric analysis also confirmed that the induced tetraploids from quartered-seed were true-to-type. The 0.5?% colchicine treatment for 4 to 8?h gave the best results with 39 and 43?% of the explants yielding tetraploid plants, respectively. Two?months following transfer to ex vitro environment, morphological and growth characteristics of the induced tetraploids were measured. Overall, increasing the ploidy level from 2× to 4× resulted in fewer stomata but more trichomes per unit leaf area. Tetraploid plants obtained in this study should expand the genetic base of Arachis, and can also be used in overcoming the existing hybridization barriers that may be due to ploidy differences within the genus Arachis.     

In vitro induction of tetraploid plants from a diploid Japanese pear cultivar (Pyrus pyrifolia N. cv. Hosui)

Tetraploid plants of a Japanese pear cultivar (Pyrus pyrifolia N.) were induced using an in vitro colchicine treatment. Proliferating shoots were transferred to a shoot proliferation medium (SPM) containing 0.1% or 0.01% colchicine, incubated for 1, 2, 4 or 8 days, then transferred to fresh SPM. The ploidy level of the colchicine-treated individuals was analysed by flow cytometry. Four months after colchicine treatment four mixoploids were selected and cultured on SPM for a further 5 months. The ploidy level of the proliferated shoots derived from selected mixoploids was analysed, and five tetraploid shoots were selected. The selected tetraploid shoots were rooted, and potted plants were grown in a greenhouse. The stomata of tetraploid plants were found to be longer than those in diploid plants.     

Enhancement of artemisinin content in tetraploid Artemisia annua plants by modulating the expression of genes in artemisinin biosynthetic pathway

Tetraploid Artemisia annua plants were successfully inducted by using colchicine, and their ploidy was confirmed by flow cytometry. Higher stomatal length but lower frequency in tetraploids were revealed and could be considered as indicators of polyploidy. The average level of artemisinin in tetraploids was increased from 39% to 56% than that of the diploids during vegetation period, as detected by high-performance liquid chromatography-evaporative light scattering detector. Gene expressions of 10 key enzymes related to artemisinin biosynthetic pathway in different ploidy level were analyzed by semiquantitative polymerase chain reaction and significant upregulation of FPS, HMGR, and artemisinin metabolite-specific Aldh1 genes were revealed in tetraploids. Slight increased expression of ADS was also detected. Our results suggest that higher artemisinin content in tetraploid A. annua may result from the upregulated expression of some key enzyme genes related to artemisinin biosynthetic pathway.     

Chromosome doubling in sterile Syringa vulgaris × S. pinnatifolia hybrids by in vitro culture of nodal explants

The aim was to produce tetraploid forms of hybrids of Syringa vulgaris × S. pinnatifolia to restore fertility and enable further breeding to be undertaken. Excised nodal sections of three selections were pre-cultured for 5 days then treated with a range of colchicine concentrations for 1, 2 or 3 days, after which they were washed three times in sterile distilled water and cultured on shoot proliferation medium. Frequent movement to fresh medium was beneficial to survival. Three successive experiments established the range of concentrations of colchicine, 0.05 mM to 0.25 mM, at which tetraploids were likely to be produced. Thus a protocol for the production of tetraploids was established. Cytometric analysis showed that tetraploid forms of two selections were produced. This revised version was published online in August 2006 with corrections to the Cover Date.