Analysis of microRNA expression by in situ hybridization with RNA oligonucleotide probes

In situ hybridization is an important tool for analyzing gene expression and developing hypotheses about gene functions. The discovery of hundreds of microRNA (miRNA) genes in animals has provided new challenges for analyzing gene expression and functions. The small size of the mature miRNAs ( approximately 20-24 nucleotides in length) presents difficulties for conventional in situ hybridization methods. However, we have described a modified in situ hybridization method for detection of mammalian miRNAs in tissue sections, based upon the use of RNA oligonucleotide probes in combination with highly specific wash conditions. Here, we present detailed procedures for detection of miRNAs in tissue sections or cultured cells. The methods described can utilize either nonradioactive hapten-conjugated probes that are detected by enzyme-coupled antibodies, or radioactively labeled probes that are detected by autoradiography. The ability to visualize miRNA expression patterns in tissue sections provides an additional tool for the analyses of miRNA expression and function. In addition, the use of radioactively labeled probes should facilitate quantitative analyses of changes in miRNA gene expression.     

Direct and sensitive miRNA profiling from low-input total RNA

We have developed a sensitive, accurate, and multiplexed microRNA (miRNA) profiling assay that is based on a highly efficient labeling method and novel microarray probe design. The probes provide both sequence and size discrimination, yielding in most cases highly specific detection of closely related mature miRNAs. Using a simple, single-vial experimental protocol, 120 ng of total RNA is directly labeled using Cy3 or Cy5, without fractionation or amplification, to produce precise and accurate measurements that span a linear dynamic range from 0.2 amol to 2 fmol of input miRNA. The results can provide quantitative estimates of the miRNA content for the tissues studied. The assay is also suitable for use with formalin-fixed paraffin-embedded clinical samples. Our method allows rapid design and validation of probes for simultaneous quantitative measurements of all human miRNA sequences in the public databases and to new miRNA sequences as they are reported.     

An oligonucleotide microarray for microRNA expression analysis based on labeling RNA with quantum dot and nanogold probe

MicroRNAs (miRNAs) play important regulatory roles in animals and plants by targeting mRNAs for cleavage or translational repression. They have diverse expression patterns and might regulate various developmental and physiological processes. Profiling miRNA expression is very helpful for studying biological functions of miRNAs. We report a novel miRNA profiling microarray, in which miRNAs were directly labeled at the 3′ terminus with biotin and hybridized with complementary oligo-DNA probes immobilized on glass slides, and subsequently detected by measuring fluorescence of quantum dots labeled with streptavidin bound to miRNAs through streptavidin–biotin interaction. The detection limit of this microarray for miRNA was ~0.4 fmol, and the detection dynamic range spanned about 2 orders of magnitude. We made a model microarray to profile 11 miRNAs from leaf and root of rice (Oryza sativa L. ssp. indica) seedlings. The analysis results of the miRNAs had a good reproducibility and were consistent with the northern blot result. To avoid using high-cost detection equipment, colorimetric detection, a method based on nanogold probe coupled with silver enhancement, was also successfully introduced into miRNA profiling microarray detection.     

Highly sensitive and specific microRNA expression profiling using BeadArray technology

We have developed a highly sensitive, specific and reproducible method for microRNA (miRNA) expression profiling, using the BeadArray™ technology. This method incorporates an enzyme-assisted specificity step, a solid-phase primer extension to distinguish between members of miRNA families. In addition, a universal PCR is used to amplify all targets prior to array hybridization. Currently, assay probes are designed to simultaneously analyse 735 well-annotated human miRNAs. Using this method, highly reproducible miRNA expression profiles were generated with 100–200 ng total RNA input. Furthermore, very similar expression profiles were obtained with total RNA and enriched small RNA species (R² ≥ 0.97). The method has a 3.5–4 log (10⁵–10⁹ molecules) dynamic range and is able to detect 1.2- to 1.3-fold-differences between samples. Expression profiles generated by this method are highly comparable to those obtained with RT–PCR (R² = 0.85–0.90) and direct sequencing (R = 0.87–0.89). This method, in conjunction with the 96-sample array matrix should prove useful for high-throughput expression profiling of miRNAs in large numbers of tissue samples.     

High resolution multicolor fluorescence in situ hybridization using cyanine and fluorescein dyes: Rapid chromosome identification by directly fluorescently labeled alphoid DNA probes

We tested DNA probes directly labeled by fluorescently labeled nucleotides (Cy3-dCTP, Cy5-dCTP, FluorX-dCTP) for high resolution uni- and multicolor detection of human chromosomes and analysis of centromeric DNA organization by in situ hybridization. Alpha-satellite DNA probes specific to chromosomes 1, 2, 3, 4 + 9, 5 + 19, 6, 7, 8, 10, 11, 13 + 21, 14 + 22, 15, 16, 17, 18, 20, 22, X and Y were suitable for the accurate identification of human chromosomes in metaphase and interphase cells. Cy3-labeled probes had several advantages: (1) a high level of fluorescence (5–10 times more compared with fluorescein-labeled probes); (2) a low level of fluorescence in solution, allowing the detection of target chromosomes in situ during hybridization without the washing of slides; and (3) high resistance to photobleaching during prolonged (1-2 h) exposure to strong light, thus allowing the use of a high energy mercury lamp or a long integration time during image acquisition in digital imaging microscopy for the determination of weak signals. For di- and multicolor fluorescence in situ hybridization (FISH), we successfully used different combinations of directly fluorophorated probes with preservation of images by conventional microscopy or by digital imaging microscopy. FluorX and Cy3 dyes allowed the use of cosmid probes for mapping in a one-step hybridization experiment. Cyanine-labeled fluorophorated DNA probes offer additional possibilities for rapid chromosome detection during a simple 15-min FISH procedure, and can be recommended for basic research and clinical studies, utilizing FISH.     

Isolation and Quantification of MicroRNAs from Urinary Exosomes/Microvesicles for Biomarker Discovery

Recent studies indicate that microRNA (miRNA) is contained within exosome. Here we sought to optimize the methodologies for the isolation and quantification of urinary exosomal microRNA as a prelude to biomarker discovery studies. Exosomes were isolated through ultracentrifugation and characterized by immunoelectron microscopy. To determine the RNA was confined inside exosomes, the pellet was treated with RNase before RNA isolation. The minimum urine volume, storage conditions for exosomes and exosomal miRNA was evaluated. The presence of miRNAs in patients with various kidney diseases was validated with real-time PCR. The result shows that miRNAs extracted from the exosomal fraction were resistant to RNase digestion and with high quality confirmed by agarose electrophoresis. 16ml of urine was sufficient for miRNA isolation by absolute quantification with 4.15×10⁵ copies/ul for miR-200c. Exosomes was stable at 4℃ 24h for shipping before stored at -80℃ and was stable in urine when stored at -80°C for 12months. Exosomal miRNA was detectable despite 5 repeat freeze-thaw cycles. The detection of miRNA by quantitative PCR showed high reproducibility (>94% for intra-assay and >76% for inter-assay), high sensitivity (positive call 100% for CKD patients), broad dynamic range (8-log wide) and good linearity for quantification (R²>0.99). miR-29c and miR-200c showed different expression in different types of kidney disease. In summary, the presence of urinary exosomal miRNA was confirmed for patients with a diversity of chronic kidney disease. The conditions of urine collection, storage and miRNA detection determined in this study may be useful for future biomarker discovery efforts.     

A FRET-based assay for characterization of alternative splicing events using peptide nucleic acid fluorescence in situ hybridization

We describe a quantitative method for detecting RNA alternative splicing variants that combines in situ hybridization of fluorescently labeled peptide nucleic acid (PNA) probes with confocal microscopy Förster resonance energy transfer (FRET). The use of PNA probes complementary to sequences flanking a given splice junction allows to specifically quantify, within the cell, the RNA isoform generating such splice junction by FRET measure. As a proof of concept we analyzed two alternative splicing events originating from lymphocyte antigen 6 (LY6) complex, locus G5B (LY6G5B) pre-mRNA. These are characterized by the removal of the first intron (Fully Spliced Isoform, FSI) or by retention of such intron (Intron-Retained Isoform, IRI). The use of PNA probe pairs labeled with donor (Cy3) and acceptor (Cy5) fluorophores, suitable to FRET, flanking FSI and IRI specific splice junctions specifically detected both mRNA isoforms in HeLa cells. We have observed that the method works efficiently with probes 5–11 nt apart. The data supports that this FRET-based PNA fluorescence in situ hybridization (FP–FISH) method offers a conceptually new approach for characterizing at the subcellular level not only splice variant isoform structure, location and dynamics but also potentially a wide variety of close range RNA–RNA interactions.     

miReader: Discovering Novel miRNAs in Species without Sequenced Genome

Along with computational approaches, NGS led technologies have caused a major impact upon the discoveries made in the area of miRNA biology, including novel miRNAs identification. However, to this date all microRNA discovery tools compulsorily depend upon the availability of reference or genomic sequences. Here, for the first time a novel approach, miReader, has been introduced which could discover novel miRNAs without any dependence upon genomic/reference sequences. The approach used NGS read data to build highly accurate miRNA models, molded through a Multi-boosting algorithm with Best-First Tree as its base classifier. It was comprehensively tested over large amount of experimental data from wide range of species including human, plants, nematode, zebrafish and fruit fly, performing consistently with >90% accuracy. Using the same tool over Illumina read data for Miscanthus, a plant whose genome is not sequenced; the study reported 21 novel mature miRNA duplex candidates. Considering the fact that miRNA discovery requires handling of high throughput data, the entire approach has been implemented in a standalone parallel architecture. This work is expected to cause a positive impact over the area of miRNA discovery in majority of species, where genomic sequence availability would not be a compulsion any more.     

A novel microarray approach reveals new tissue-specific signatures of known and predicted mammalian microRNAs

Microarrays to examine the global expression levels of microRNAs (miRNAs) in a systematic in-parallel manner have become important tools to help unravel the functions of miRNAs and to understand their roles in RNA-based regulation and their implications in human diseases. We have established a novel miRNA-specific microarray platform that enables the simultaneous expression analysis of both known and predicted miRNAs obtained from human or mouse origin. Chemically modified 2′-O-(2-methoxyethyl)-(MOE) oligoribonucleotide probes were arrayed onto Evanescent Resonance (ER) microchips by robotic spotting. Supplementing the complementary probes against miRNAs with carefully designed mismatch controls allowed for accurate sequence-specific determination of miRNA expression profiles obtained from a panel of mouse tissues. This revealed new expression signatures of known miRNAs as well as of novel miRNAs previously predicted using bioinformatic methods. Systematic confirmation of the array data with northern blotting and, in particular, real-time PCR suggests that the described microarray platform is a powerful tool to analyze miRNA expression patterns with rapid throughput and high fidelity.     

High-efficiency RNA cloning enables accurate quantification of miRNA expression by deep sequencing

Small RNA cloning and sequencing is uniquely positioned as a genome-wide approach to quantify miRNAs with single-nucleotide resolution. However, significant biases introduced by RNA ligation in current protocols lead to inaccurate miRNA quantification by 1000-fold. Here we report an RNA cloning method that achieves over 95% efficiency for both 5′ and 3′ ligations. It achieves accurate quantification of synthetic miRNAs with less than two-fold deviation from the anticipated value and over a dynamic range of four orders of magnitude. Taken together, this high-efficiency RNA cloning method permits accurate genome-wide miRNA profiling from total RNAs.