Improvement of the thermostability and catalytic activity of a mesophilic family 11 xylanase by N-terminus replacement

To improve the thermostability and catalytic activity of Aspergillus niger xylanase A (AnxA), its N-terminus was substituted with the corresponding region of Thermomonospora fusca xylanase A (TfxA). The constructed hybrid xylanase, named ATx, was overexpressed in Pichia pastoris and secreted into the medium. After 96-h 0.25% methanol induction, the activity of the ATx in the culture supernatant reached its peak, 633 U/mg, which was 3.6 and 5.4 times as high as those of recombinant AnxA (reAnxA) and recombinant TfxA (reTfxA), respectively. Studies on enzymatic properties showed that the temperature and pH optimum of the ATx were 60 degrees C and 5.0, respectively. The ATx was more thermostable, when it was treated at 70 degrees C, pH 5.0, for 2 min, the residual activity was 72% which was higher than that of reAnxA and similar to that of reTfxA. The ATx was very stable over a broader pH range (3.0-10.0) and much less affected by acid/base conditions. After incubation at pH 3.0-10.0, 25 degrees C for 1 h, all the residual activities of the ATx were over 80%. These results revealed that the thermostability and catalytic activity of the AnxA were enhanced. The N-terminus of TfxA contributed to the observed thermostability of itself and the ATx, and to the high activity of the ATx. Replacement of N-terminus between mesophilic eukaryotic and thermostable prokaryotic enzymes may be a useful method for constructing the new and improved versions of biologically active enzymes.     

Purification and characteristic of endo-(1--4)-beta-xylanase from Geotrichum candidum 3C

A method of purification of endo-(1-->4)-beta-xylanase (endoxylanase; EC 3.2.1.8) from the culture liquid of Geotrichum candidum 3C, grown for three days, is described. The enzyme purified 23-fold had a specific activity of 32.6 U per mg protein (yield, 14.4%). Endoxylanase was shown to be homogeneous by SDS-PAGE (molecular weight, 60 to 67 kDa). With carboxymethyl xylan as substrate, the optimum activity (determined viscosimetrically) was recorded at pH 4.0 (pI 3.4). The enzyme retained stability at pH 3.0-4.5 and 30-45 degrees C for 1 h. With xylan from beach wood, the hydrolytic activity of the enzyme (ability to saccharify the substrate) was maximum at 50 degrees C. In 72 h of exposure to 0.2 mg/ml endoxylanase, the extent of saccharification of xylans from birch wood, rye grain, and wheat straw amounted to 10, 12, and 7.7%, respectively. At 0.4 mg/ml, the extent of saccharification of birch wood xylan was as high as 20%. In the case of birch wood xylan, the initial hydrolysis products were xylooligosaccharides with degrees of polymerization in excess of four; the end products were represented by xylobiose, xylotriose, xylose, and acid xylooligosaccharides.     

Optimization of extracellular xylanase production by Dictyoglomus sp. B1 in continuous culture

The thermophilic, xylanolytic, anaerobic organism, Dictyoglomus sp. B1, was cultivated in batch and continuous cultures in media containing insoluble beech-wood xylan. The extracellular xylanase activity levels obtained for the two cultivation methods were compared. Experiments were performed separately to determine the optimum substrate concentration, dilution rate, pH and temperature for xylanase production. Maximum xylanase activity was found at a substrate concentration of 1.5 g xylan/l, a dilution rate of 0.112 h^–1, pH 8.0 and at 7°C. Different combinations of these optimum values were used in a 2³ factorial experiment to investigate whether an increase in the xylanase production/activity could be achieved. A maximum xylanase activity of 2312 U/l was found when fermentors were operated at 73°C with a substrate concentration of 1.5 g xylan/l, pH 8.0, and a dilution rate of 0.112 h^–1. Thus, the optimum xylanase activity in the factorial experiment was obtained when the conditions that gave the maximum xylanase activities in the individual experiments were combined. Optimum xylanase activity obtained in the 2³ factorial experiment was 6.2 times higher than the activity found in the initial batch culture (373 U/l) and 3.0 times higher than the activity of a batch culture (783 U/l) grown at the same optimum conditions as the factorial experiment. The higher specific xylanase activity (217 U/mg protein) found in the 2³ factorial experiment was 4.1 times higher than the specific activity in the initial batch culture (53 U/mg protein).     

Purification and Characterization of endo-(1→4)-β-xylanase fromGeotrichum candidum 3C

A method of purification of endo-( 1 → 4)-β-xylanase (endoxylanase; EC 3.2.1.8) from the culture liquid ofGeotrichum candidum 3C, grown for three days, is described. The enzyme, purified 23-fold, had a specific activity of 32.6 U per mg protein (yield, 14.4%). Endoxylanase was shown to be homogeneous by SDS-PAGE (molecular weight, 60 to 67 kDa). With carboxymethyl xylan as the substrate, the optimum activity (determined viscosimetrically) was recorded at pH 4.0 (pI 3.4). The enzyme retained stability at pH 3.0-4.5 and 30–45°C for 1 h. With xylan from birch wood, the hydrolytic activity of the enzyme (ability to saccharify the substrate) was maximum at 50°C. In 72 h of exposure to 0.2 mg/ml endoxylanase, the extent of saccharification of xylans from birch wood, rye grain, and wheat straw amounted to 10,12, and 7.7%, respectively. At 0.4 mg/ml, the extent of saccharification of birch wood xylan was as high as 20%. In the case of birch wood xylan, the initial hydrolysis products were xylooligosaccharides with degrees of polymerization in excess of four; the end products were represented by xylobiose, xylotriose, xylose, and acid xylooligosaccharides.     

Expression of recombinant Bacillus licheniformis xylanase A in Pichia pastoris and xylooligosaccharides released from xylans by it

The mature peptide of Bacillus licheniformis xylanase A (BlxA) was successfully expressed in Pichia pastoris under the control of AOX1 promoter. After 96-h 0.25% methanol induction, the activity of recombinant B. licheniformis xylanase A (reBlxA) in culture supernatant was 122.9 U/mg. Enzymatic properties assays showed that the optimum temperature and pH for reBlxA were 60 degrees C and pH 6.0, respectively. When treated at 70 degrees C, pH 6.0 for 2 min, the residual activities of the reBlxA were 76%. Over 80% of reBlxA activity was retained after treatment of the enzyme by preincubation over a pH range of 5.0-9.0 for 1h at 25 degrees C. High performance liquid chromatography (HPLC) analysis revealed that xylotriose (X3) was the main hydrolysis product released from birchwood xylan and wheat bran insoluble xylan by reBlxA. The mode of action studies showed that reBlxA was an endo-acting xylanase and xylobiose (X2), xylotriose, xylotetraose (X4), xylopentaose (X5), and xylohexaose (X6) could be hydrolyzed by it. This is the first report on the expression of reBlxA in yeast and on determining and quantifying the hydrolysis products released from xylans by reBlxA.     

High-level expression of extracellular lipase Lip2 from Yarrowia lipolytica in Pichia pastoris and its purification and characterization

The extracellular lipase gene from Yarrowia lipolytica (YlLip2) was cloned into the pPICZalphaA and integrated into the genome of the methylotrophic yeast Pichia pastoris X-33. The lipase was successfully expressed and secreted with an apparent molecular weight of 39kDa using Saccharomyces cerevisiae secretion signal peptide (alpha-factor) under the control of the methanol inducible promoter of the alcohol oxidase 1 gene (AOX1). The lipase activity of 12,500,000U/l (2.10g total protein and 0.63g lipase per liter) was obtained in a fed-batch cultivation, where methanol feeding was linked to the dissolved oxygen content after initial glycerol culture. After fermentation, the supernatant was concentrated by ultrafiltration with a 10kDa cut off membrane and purified with ion exchange chromatography using Q Sepharose FF. Deglycosylation showed that the recombinant lipase is a glycoprotein which contains the same content of sugar (about 12%) as the native lipase from Y. lipolytica. The optimum temperature and pH of the recombinant lipase was 40 degrees C and 8.0, respectively. The lipase showed high activity toward long-chain fatty acid methyl esters (C12-C16).     

Purification and characterization of a low molecular weight endoxylanase from solid-state cultures of alkali-tolerant Aspergillus fischeri

A low molecular weight, alkaline-stable endoxylanase (XylB) was purified to homogeneity from solid-state culture of Aspergillus fischeri Fxn1. XylB had a molecular mass of 13 kDa which is the lowest of reported xylanases. Optimal activity was at pH 6 and 55 degrees C. XylB was stable from pH 4.5 to 10 and up to 60 degrees C. It was non-glycosylated. The apparent K(m) and V(max) values of XylB on birch wood xylan were 0.53 mg ml(-1) and 0.2 mmol min-1 mg-1, respectively. The activity of XylB was not inhibited by Cd2+, Zn2+, Co2+, EDTA, iodoacetamide, beta-mercaptoethanol and acetic anhydride but strongly inhibited by 10 mm of N-bromosuccinimide, Hg2+, Pb2+ and p-hydroxymercuric benzoate. XylB is an endoxylanase since it hydrolysed xylan resulting the formation of xylo-oligomers but not of xylose residues.     

Expression of chitin deacetylase from Colletotrichum lindemuthianum in Pichia pastoris: purification and characterization

The chitin deacetylase gene from Colletotrichum lindemuthianum UPS9 was isolated and cloned in Pichia pastoris as a tagged protein with six added terminal histidine residues. The expressed enzyme was recovered from the culture supernatant and further characterized. A single-step purification based on specific binding of the histidine residues was achieved. The purified enzyme has a molecular mass of 25 kDa and is not glycosylated as determined by mass spectrometry. The activity of the recombinant chitin deacetylase on chitinous substrates was investigated. With chitotetraose as substrate, the optimum temperature and pH for enzyme activity are 60 degrees C and 8.0, respectively. The specific activity of the pure protein is 72 U/mg. One unit of enzyme activity is defined as the amount of enzyme that produces 1 micromol of acetate per minute under the assay conditions employed. The enzyme activity is enhanced in the presence of Co2+ ions. A possible use of the recombinant chitin deacetylase for large-scale biocatalytic conversion of chitin to chitosan is discussed.     

Optimization of alkaline protease production by <Emphasis Type="Italic">Aspergillus clavatus</Emphasis> ES1 in <Emphasis Type="Italic">Mirabilis jalapa</Emphasis> tuber powder using statistical experimental design

Medium composition and culture conditions for the bleaching stable alkaline protease production by Aspergillus clavatus ES1 were optimized. Two statistical methods were used. Plackett-Burman design was applied to find the key ingredients and conditions for the best yield. Response surface methodology (RSM) including full factorial design was used to determine the optimal concentrations and conditions. Results indicated that Mirabilis jalapa tubers powder (MJTP), culture temperature, and initial medium pH had significant effects on the production. Under the proposed optimized conditions, the protease experimental yield (770.66 U/ml) closely matched the yield predicted by the statistical model (749.94 U/ml) with R (2)=0.98. The optimum operating conditions obtained from the RSM were MJTP concentration of 10 g/l, pH 8.0, and temperature of 30 degrees C, Sardinella heads and viscera flour (SHVF) and other salts were used at low level. The medium optimization contributed an about 14.0-fold higher yield than that of the unoptimized medium (starch 5 g/l, yeast extract 2 g/l, temperature 30 degrees C, and pH 6.0; 56 U/ml). More interestingly, the optimization was carried out with the by-product sources, which may result in cost-effective production of alkaline protease by the strain.     

Cloning, expression, and characterization of a new xylanase with broad temperature adaptability from Streptomyces sp. S9

A new xylanase gene, xynAS9, was cloned from Streptomyces sp. S9, which was isolated from Turpan Basin, China. The full-length gene consists of 1,395 bp and encodes 465 amino acids including 38 residues of a putative signal peptide. The overall amino acid sequence shares the highest identity (50.8%) with a putative endo-1,4-beta-xylanase from Streptomyces avermitilis of the glycoside hydrolase family 10. The gene fragment encoding the mature xylanase was expressed in Escherichia coli BL21 (DE3). The recombinant protein was purified to electrophoretic homogeneity and subsequently characterized. The optimal pH and temperature for the recombinant enzyme were 6.5 and 60 degrees C, respectively. The enzyme showed broad temperature adaptability, retaining more than 65% of the maximum activity when assayed at 50-80 degrees C. The enzyme also had good thermal and pH stability. The K (m) values for oat spelt xylan and birchwood xylan substrates were 2.85 and 2.43 mg ml(-1), with the V (max) values of 772.20 and 490.87 mumol min(-1) mg(-1), respectively. The hydrolysis products of xylan were mainly xylose and xylobiose. These favorable properties should make XynAS9 a good candidate in various industrial applications.     

Purification and characterization of an endoxylanase from the culture broth of Bacillus cereus BSA1

An extracellular xylanase from the fermented broth of Bacillus cereus BSA1 was purified and characterized. The enzyme was purified to 3.43 fold through ammonium sulphate precipitation, DEAE-cellulose chromatography and followed by gel filtration through Sephadex G-100 column. The molecular mass of the purified xylanse was about 33 kDa. The enzyme was an endoxylanase as it initially degraded xylan to xylooligomers. The purified enzyme showed optimum activity at 55 degrees C and at pH 7.0 and remained reasonably stable in a wide range ofpH (5.0-8.0) and temperature (40-65 degrees C). The Km and Vmax values were found to be 8.2 mg/ml and 181.8 micromol/(min mg), respectively. The enzyme had no apparent requirement ofcofactors, and its activity was strongly inhibited by Cu++, Hg++. It was also a salt tolerant enzyme and stable upto 2.5 M of NaCl and retained its 85% activity at 3.0 M. For stability and substrate binding, the enzyme needed hydrophobic interaction that revealed when most surfactants inhihited xylanase activity. Since the enzyme was active over wide range ofpH, temperature and remained active in higher salt concentration, it could find potential uses in biobleaching process in paper industries.     

Characterization of the Bacillus subtilis WL-3 mannanase from a recombinant Escherichia coli

A mannanase was purified from a cell-free extract of the recombinant Escherichia coli carrying a Bacillus subtilis WL-3 mannanase gene. The molecular mass of the purified mannanase was 38 kDa as estimated by SDS-PAGE. Optimal conditions for the purified enzyme occurred at pH 6.0 and 60 degrees C. The specific activity of the purified mannanase was 5,900 U/mg on locust bean gum (LBG) galactomannan at pH 6.0 and 50 degrees C. The activity of the enzyme was slightly inhibited by Mg(2+), Ca(2+), EDTA and SDS, and noticeably enhanced by Fe(2+). When the enzyme was incubated at 4 degrees C for one day in the presence of 3 mM Fe(2+), no residual activity of the mannanase was observed. The enzyme showed higher activity on LBG and konjac glucomannan than on guar gum galactomannan. Furthermore, it could hydrolyze xylans such as arabinoxylan, birchwood xylan and oat spelt xylan, while it did not exhibit any activities towards carboxymethylcellulose and para-nitrophenyl-beta-mannopyranoside. The predominant products resulting from the mannanase hydrolysis were mannose, mannobiose and mannotriose for LBG or mannooligosaccharides including mannotriose, mannotetraose, mannopentaose and mannohexaose. The enzyme could hydrolyze mannooligosaccharides larger than mannobiose.     

Chimaereicella alkaliphila gen. nov., sp. nov., a Gram-negative alkaliphilic bacterium isolated from a nonsaline alkaline groundwater

A Gram-negative bacterium designated AC-74(T) was isolated from a highly alkaline groundwater environment (pH 11.4). This organism formed rod-shaped cells, is strictly aerobic, catalase and oxidase positive, tolerates up to 3.0% NaCl, has an optimum growth temperature of 30 degrees C, but no growth occurs at 10 or 40 degrees C, and an optimum pH value of 8.0, but no growth occurs at pH 7.0 or 11.3. The predominant fatty acids are iso-15:0, iso-17:1 omega9c and 16:1 omega7c and or iso-15:2OH. The G+C content of DNA was 43.5mol%. The phylogenetic analyses of the sequences of the 16s RNA genes indicated that strain AC-74(T) belongs to the family "Flexibacteriaceae" and is phylogenetically equidistant ( approximately 94.5%) from the majority of the species of the genus Algoriphagus and from the genus Hongiella. Based on the phylogenetic analyses and distinct phenotypic characteristics, we are of the opinion that strain AC-74(T), represents a new species of the novel genus for which we propose the name Chimaereicella alkaliphila gen. nov., sp. nov.     

Production of xylanase from a newly isolated <Emphasis Type="Italic">Penicillium</Emphasis> sp. ZH-30

A new strain of Penicillium sp. ZH-30 that produces xylanase was isolated from soil. According to the morphology and comparison of internal transcribed spacer (ITS) rDNA gene sequence, the strain Penicillium sp. ZH-30 was identified as a strain of Penicillium oxalicum. When xylan or wheat bran was used as substrate at 30°C for 3 days under submerged cultivation, xylanase production was 5.3 and 13.3 U ml⁻¹, respectively. The temperature and pH for optimum activity were 50°C and 5.0–6.0, respectively.     

Xylanase from a newly isolated Fusarium verticillioides capable of utilizing corn fiber xylan

A fungus, Fusarium verticillioides (NRRL 26518), was isolated by screening soil samples using corn fiber xylan as carbon source. The extracellular xylanase from this fungal strain was purified to apparent homogeneity from the culture supernatant by ultrafiltration using a 30,000 cut-off membrane, octyl-Sepharose chromatography and Bio gel A-0.5 m gel filtration. The purified xylanase (specific activity 492 U/mg protein; MW 24,000; pI 8.6) displayed an optimum temperature at 50 degrees C and optimum pH at 5.5, a pH stability range from 4.0 to 9.5 and thermal stability up to 50 degrees C. It hydrolyzed a variety of xylan substrates mainly to xylobiose and higher short-chain xylooligosaccharides. No xylose was formed. The enzyme did not require metal ions for activity and stability.     

Cloning and characterization of a novel exo-α-1,5-L-arabinanase gene and the enzyme

A novel exo-alpha-1,5-L-arabinanase gene (arn3) was isolated, cloned, and expressed in E. coli. The recombinant enzyme (ARN3) had a pH optimum of 6.0-7.0 and a pH 3.0-7.0 stability range. The temperature optimum was 50 degrees C with a stability less than or equal to 45 degrees C. The recombinant ARN3 cleaved carboxymethyl (CM)-arabinan, debranched arabinan, and linear arabinan at a decreasing rate and is inactive on sugar beet arabinan, wheat arabinoxylan, and p-nitrophenyl-alpha-L-arabinofuranoside. The enzyme hydrolyzed debranched arabinan and synthetic arabino-oligosaccharides entirely to arabinose. The apparent K(m) and V(max) values were determined to be 6.2+/-0.3 mg/ml and 0.86+/-0.01 mg ml(-1) min(-1), respectively (pH 7.0, 37 degrees C, CM-arabinan). Multiple sequence alignment and homology modeling revealed unique short sequences of amino acids extending the loop involved in partial blocking of one end of the substrate-binding site on the surface of the molecule.     

Purification and biochemical characterization of endoglucanase from Penicillium pinophilum MS 20

Cellulases find increasing prominence in sustainable production of fuel and feedstock from lignocellulosic biomass. The purification and biochemical characterization of individual components of cellulase complex is important to understand the mechanism of their action for the solubilization of crystalline cellulose. In this study, an extra-cellular endoglucanase isolated from culture filtrate of Penicillium pinophilum MS 20 was purified to homogeneity by ammonium sulphate precipitation, ion-exchange chromatography and gel filtration. The purified endoglucanase (specific activity 69 U/mg) was a monomeric protein with molecular mass of 42 kDa, as determined by SDS-PAGE. The endoglucanase was active over a broad range of pH (4-7) with maximum activity at pH 5 and showed optimum temperature of 50 degrees C. It retained 100% activity at 50 degrees C for 6 h and half- lives of 4 h and 3 h at 60 degrees C and 70 degrees C, respectively. The kinetic constants for the endoglucanase determined with carboxymethyl cellulose as substrate were V(max) of 72.5 U/mg and apparent K(m) of 4.8 mg/ml. The enzyme also showed moderate activity towards H3PO4 swollen cellulose and p-nitrophenyl beta-D-glucoside, but no activity towards filter paper, Avicel and oat spelt xylan. The activity was positively modulated by 47, 32 and 25% in the presence of Co2+, Zn2+ and Mg2+, respectively to the reaction mixture. The wide pH stability (4-7) and temperature stability up to 50 degrees C of endoglucanase makes the enzyme suitable for use in cellulose saccharification at moderate temperature and pH.     

Effect of cultivation pH and agitation rate on growth and xylanase production by Aspergillus oryzae in spent sulphite liquor

The effects of cultivation pH and agitation rate on growth and extracellular xylanase production by Aspergillus oryzae NRRL 3485 were investigated in bioreactor cultures using spent sulphite liquor (SSL) and oats spelts xylan as respective carbon substrates. Xylanase production by this fungus was greatly affected by the culture pH, with pH 7.5 resulting in a high extracellular xylanase activity in the SSL-based medium as well as in a complex medium with xylan as carbon substrate. This effect, therefore, was not solely due to growth inhibition at the lower pH values by the acetic acid in the SSL. The xylanase activity in the SSL medium peaked at 199 U ml(-1) at pH 7.5 with a corresponding maximum specific growth rate of 0.39 h(-1). By contrast, the maximum extracellular beta-xylosidase activity pf 0.36 U ml(-1) was recorded at pH 4.0. Three low molecular weight xylanase isozymes were secreted at all pH values within the range of pH 4-8, whereas cellulase activity on both carbon substrates was negligible. Impeller tip velocities within the range of 1.56-3.12 m s(-1) had no marked effect, either on the xylanase activity, or on the maximum volumetric rate of xylanase production. These results also demonstrated that SSL constituted a suitable carbon feedstock as well as inducer for xylanase production in aerobic submerged culture by this strain of A. oryzae.     

Purification and properties of an extracellular beta-xylosidase from a newly isolated Fusarium proliferatum

An extracellular beta-xylosidase from a newly isolated Fusarium proliferatum (NRRL 26517) capable of utilizing corn fiber xylan as growth substrate was purified to homogeneity from the culture supernatant by DEAE-Sepharose CL-6B batch adsorption chromatography, CM Bio-Gel A column chromatography, Bio-Gel A-0.5 m gel filtration and Bio-Gel HTP Hydroxyapatite column chromatography. The purified beta-xylosidase (specific activity, 53 U/mg protein) had a molecular weight of 91,200 as estimated by SDS-PAGE. The optimum temperature and pH for the action of the enzyme were 60 degrees C and 4.5, respectively. The purified enzyme hydrolyzed xylobiose and higher xylooligosaccharides but was inactive against xylan substrates. It had a Km value of 0.77 mM (p-nitrophenol-beta-D-xyloside, pH 4.5, 50 degrees C) and was competitively inhibited by xylose with a Ki value of 5 mM. The enzyme did not require any metal ion for activity and stability. Comparative properties of this enzyme with other fungal beta-xylosidases are presented.