Isolation and characterization of Escherichia coli phase variants and mutants deficient in type 1 pilus production.

Type 1 pili of Escherichia coli are the prototype of the somatic class of pili found on many strains of bacteria. As a first step in the genetic analysis of type 1 piliation, an extensive series of nonpiliated derivatives of E. coli K-12 strain AW405, was characterized to produce attached or free pili when examined in the antiserum or appeared to produce attached or free pili when examined in the electron microscope. The derivatives fell into two classes; phase variants and mutants. Phase variants that formed colonies of two distinctive types, one associated with a predominantly piliated (P+), and the other associated with a nonpiliated (P-) phase, were obtained. Each phase could give rise to the other at a relatively high rate, which was greater in the P- to P+ direction during culture in unshaken liquid medium. In addition, 77 Pil- mutants were selected on the basis of a subtle difference in colonial morphology. The mutants reverted, if at all, at a much lower rate than that of the P- to P+ change. The stability of Pil- derivatives grown in unshaken liquid medium was used as a criterion for distinguishing between phase variants and mutants, Phase variation also effected colonial morphology and chemotactic swarming. These properties did not directly depend upon piliation since Pil- mutants were only slightly altered in colonial form and unaltered in chemotactic swarming. Piliation of Pil+ bacteria was quantitatively affected by growth conditions.     

Products of three accessory genes, pilB, pilC, and pilD, are required for biogenesis of Pseudomonas aeruginosa pili.

The polar pili of Pseudomonas aeruginosa are composed of monomers of the pilin structural subunits. The biogenesis of pili involves the synthesis of pilin precursor, cleavage of a six-amino-acid leader peptide, membrane translocation, and assembly of monomers into a filamentous structure extending from the bacterial surface. This report describes three novel genes necessary for the formation of pili. DNA sequences adjacent to pilA, the pilin structural gene, were cloned and mutagenized with transposon Tn5. Each of the insertions were introduced into the chromosome of P. aeruginosa PAK by gene replacement. The effect of the Tn5 insertions in the bacterial chromosome on pilus assembly was assessed by electron microscopy and sensitivity of mutants to a pilus-specific bacteriophage. The resultant mutants were also tested for synthesis and membrane localization of the pilin antigen in order to define the genes required for maturation, export, and assembly of pilin. A 4.0-kilobase-pair region of DNA adjacent to the pilin structural gene was found to be essential for formation of pili. This region was sequenced and found to contain three open reading frames coding for 62-, 38- to 45-, and 28- to 32-kilodalton proteins (pilB, pilC, and pilD, respectively). Three proteins of similar molecular weight were expressed in Escherichia coli from the 4.0-kilobase-pair fragment flanking pilA with use of a T7 promoter-polymerase expression system. The results of the analyses of the three genes and the implications for pilin assembly and maturation are discussed.     

Identification of a Serratia entomophila genetic locus encoding amber disease in New Zealand grass grub (Costelytra zealandica).

Serratia entomophila UC9 (A1MO2), which causes amber disease in the New Zealand grass grub Costelytra zealandica, was subjected to transposon (TnphoA)-induced mutagenesis. A mutant (UC21) was found to be nonpathogenic (Path-) to grass grub larvae in bioassays and was shown, by Southern hybridization, to contain a single TnphoA insertion. This mutant failed to adhere to the gut wall (Adn-) of the larvae and also failed to produce pili (Pil-). A comparative study of the total protein profiles of wild-type S. entomophila UC9 and mutant UC21 revealed that the mutant lacked an approximately 44-kDa protein and overexpressed an approximately 20-kDa protein. Transfer of cosmids containing homologous wild-type sequences into mutant strain UC21 restored wild-type phenotypes (Path+, Pil+, and Adn+). One of the complementing cosmids (pSER107) conferred piliation on Pil- Escherichia coli HB101. The TnphoA insertion in UC21 was mapped within an 8.6-kb BamHI fragment common to the complementing cosmids, and we designated this gene locus amb-1. Six gene products with molecular masses of 44, 36, 34, 33, 20, and 18 kDa were detected in E. coli minicells exclusive to the cloned 8.6-kb fragment (pSER201A). The 44-kDa gene product was not detected in E. coli minicells containing the cloned mutant fragment. Saturation mutagenesis of this fragment produced four unlinked insertional mutations with active fusions to TnphoA. These active fusions disrupted the expression of one or more gene products encoded by amb-1. The 8.6-kb fragment cloned in the opposite orientation (pSER201B) expressed only a 20-kDa protein. We propose that these are the products of structural and/or regulatory genes involved in adhesion and/or piliation which are prerequisites in the S. entomophila-grass grub interaction leading to amber disease.     

Pilus formation and protein secretion by the same machinery in Escherichia coli

The secreton (type II secretion) and type IV pilus biogenesis branches of the general secretory pathway in Gram-negative bacteria share many features that suggest a common evolutionary origin. Five components of the secreton, the pseudopilins, are similar to subunits of type IV pili. Here, we report that when the 15 genes encoding the pullulanase secreton of Klebsiella oxytoca were expressed on a high copy number plasmid in Escherichia coli, one pseudopilin, PulG, was assembled into pilus-like bundles. Assembly of the 'secreton pilus' required most but not all of the secreton components that are essential for pullulanase secretion, including some with no known homologues in type IV piliation machineries. Two other pseudopilins, pullulanase and two outer membrane-associated secreton components were not associated with pili. Thus, PulG is probably the major component of the pilus. Expression of a type IV pilin gene, the E.coli K-12 gene ppdD, led to secreton-dependent incorporation of PpdD pilin into pili without diminishing pullulanase secretion. This is the first demonstration that pseudopilins can be assembled into pilus-like structures.     

DNA sequence analysis of point mutations in traA, the F pilin gene, reveal two domains involved in F-specific bacteriophage attachment

Summary Six missense point mutations in traA (WPFL43,44,45,46,47 and 51), the gene encoding F pilin in the transfer region of the F plasmid, have been characterized for their effect on the transfer ability, bacteriophage (R17, QB and fl) sensitivity and levels of piliation expressed by the plasmid. The sequence analysis of the first five of these mutations revealed two domains in the F pilin subunit exposed on the surface of the F pilus which mediate phage attachment. These two domains include residues 14–17 (approximately) and the last few residues at the carboxy-terminus of the pilin protein. One of these mutants had a pleiotropic affect on pilus function and was thought to have affected pilus assembly. The sixthe point mutant (WPFL51), previously thought to be in traA, was complemented by chimeric plasmids carrying the traG gene of the F transfer region, which may be involved in the acetylation of the pilin subunit. A traA nonsense mutant (JCFL1) carried an amber mutation near the amino-terminus which is well suppressed in SuI⁺ (supD) and SuIII⁺ (supF) strains. Neither the antigenicity of the pilin nor the efficiency of plating of F-specific bacteriophages were affected when this plasmid was harbored by either suppressor strain. A second amber mutant (JCFL25) which is not suppressible, carried its mutation in the codon for the single tryptophan in F pilin, suggesting that this residue is important in subunit interactions during pilus assembly. Two other point mutants (JCFL32 and 44) carried missense mutations in the leader sequence (positions 9 and 13) which affected the number of pili per cell presumably by altering the processing of propilin to pilin.     

Conjugal transfer system of plasmid RP4: analysis by transposon 7 insertion.

We have begun an analysis in Escherichia coli of the conjugal transfer functions of the broad-host-range plasmid RP4. We have isolated 19 tra mutants of RP4, generated by insertion of transposon 7, and mapped their insertion sites by restriction endonuclease analysis. These sites fall into two separate regions on either side of the kanamycin resistance determinant. The transfer rates of the mutants range from 10% of that of RP4 to an undetectable level. Spot tests with the P-1 pilus-specific phages PRR1, Pf3, and PR4 and electron microscopic examination for pili have classified the mutants into several phenotypes consistent with their having normal, retracted, or no pili. Analysis of transient plasmid heterozygotes, created by P1 transduction, divided the tra mutants into a minimum of five complementation groups. Some of these groups contain more than one phenotypic class and may represent more than one gene because of the possible polar and deletion effects of Tn7 insertion.     

Genetic and functional evidence that Type IV pili are required for social gliding motility in Myxococcus xanthus

The social gliding behaviour of Myxococcus xanthus has previously been associated with the presence of polar pili. A Tn 5 transposon insertion was isolated which introduces a defect in social gliding and is genetically linked to a known sgl locus; this insertion was found also to cause a piliation defect. A 2.7 kb section of DNA was isolated from either side of this transposon and sequenced, revealing three genes which encode amino acid sequences with substantial similarity to components of the Type IV pilus biogenesis pathway in Pseudomonas aeruginosa . The myxococcal pilA gene encodes a putative pilin precursor with a short signal sequence and processing site similar to those of other Type IV pilins. Myxococcal pilS and pilR encode amino acid sequences with similarity to PilS and PilR of P. aeruginosa , as well as to other members of the NtrB/C family of two-component regulators. Mutations within pilR and pilA that have no polar effect were demonstrated to be responsible for pilus and social motility defects. These results indicate that the pili of M. xanthus belong to the Type IV family of pili, and demonstrate that these pili are actually required for social motility.     

Constitutive expression of tetracycline resistance mediated by a Tn10-like element in Haemophilus parainfluenzae results from a mutation in the repressor gene.

The Tn10-like constitutively expressed tetracycline resistance determinant from a Haemophilus parainfluenzae strain was cloned in Escherichia coli. Toxicity resulting from expression on multicopy plasmids necessitated its being cloned on a low-copy plasmid vector or in cells containing the Tn10-encoded repressor. Constitutive expression of tetracycline resistance was found to result from the synthesis of a truncated inactive repressor molecule. Instead of the 23-kilodalton repressor found in other Tn10-containing strains, this determinant encoded a 14.5-kilodalton molecule. The DNA sequence of the 700-base-pair region spanning the repressor gene and promoter-operator regions of the Haemophilus determinant was identical to that of the same region of Tn10, except for the absence of a single T X A base pair in the repressor gene. This deletion leads to premature termination of the protein. Antisera to the repressor suggested that the repressor was also absent in a second independently isolated H. parainfluenzae strain bearing a Tn10-like constitutive tetracycline resistance determinant.     

Structure and function of conjugative pili: monoclonal antibodies as probes for structural variants of F pili.

The lac-tra operon fusion plasmid pTG801 contains the known F plasmid DNA transfer (tra) genes required by Escherichia coli to elaborate functional F pili (T. Grossman and P. M. Silverman, J. Bacteriol. 171:650-656, 1989). Here, we show that these pili are actually structural variants of normal F pili and that the F plasmid must contain additional genes that affect pilus structure and function. We confirmed a previous report that two monoclonal antibodies that recognize epitopes at and near the amino terminus of F pilin do not decorate the sides of normal F pili, as determined by immunogold electron microscopy. However, both antibodies laterally decorated pTG801 pili. The epitope for one of the antibodies has been shown to include the amino-terminal acetyl group of F pilin, which must therefore also be present on pTG801 pilin. Normal antibody staining was restored to pTG801 pili when cells contained, in addition to pTG801, the compatible plasmid pRS31, which must therefore include at least one gene affecting F-pilus structure. One candidate, traD, was excluded as the sole such gene, since traD+ derivatives of a pTG801 strain still elaborated pili that could be laterally decorated with antibody. Moreover, although traD alone restored RNA bacteriophage R17 infectivity to pTG801 cells, as expected, it did not mimic pRS31 in restoring to pTG801 pili other characteristics of normal F pili. We conclude that pRS31 contains as yet uncharacterized genes required for elaboration of structurally normal F pili. Finally, we identified vesicular material, especially abundant in cultures of pTG801 transformants, that stained heavily with the anti-F-pilin monoclonal antibodies. This material may reflect the inner membrane pool of F pilin.     

Chromosomal mutations that increase the production of a plasmid-encoded haemolysin in Escherichia coli

Transposon mutagenesis was used to isolate two Escherichia coli mutants which express very large amounts of haemolysin when carrying the multicopy plasmid pANN202-312. E. coli strain Hha-2 was isolated by Mud1 mutagenesis, and strain Hha-3 by Tn5 mutagenesis. The transposon insertion was chromosomal in both mutants and could be demonstrated to be unrelated to the haemolytic region of the plasmid. The substantial increase in both extracellular and intracellular haemolysin production was dependent upon plasmid copy number and was drastically reduced when either mutant carried the low-copy-number haemolytic plasmid pHly152. In both mutants, the marked increase in extracellular production was dependent upon the specific haemolysin transport genes, hlyB and hlyD. The lack of either gene function resulted in no external haemolysin production. SDS-PAGE analysis showed no change in the pattern of outer-membrane proteins of the mutants, although changes (differing between the two mutants) were seen in their periplasmic proteins. The mutations of both strains (termed hha-2 and hha-3) were mapped at minute 10.5 of the E. coli chromosome. No relation to any known gene affecting gene regulation in E. coli could be found.