Surface binding of alamethicin stabilizes its helical structure: molecular dynamics simulations.

Alamethicin is an amphipathic alpha-helical peptide that forms ion channels. An early event in channel formation is believed to be the binding of alamethicin to the surface of a lipid bilayer. Molecular dynamics simulations are used to compare the structural and dynamic properties of alamethicin in water and alamethicin bound to the surface of a phosphatidylcholine bilayer. The bilayer surface simulation corresponded to a loosely bound alamethicin molecule that interacted with lipid headgroups but did not penetrate the hydrophobic core of the bilayer. Both simulations started with the peptide molecule in an alpha-helical conformation and lasted 2 ns. In water, the helix started to unfold after approximately 300 ps and by the end of the simulation only the N-terminal region of the peptide remained alpha-helical and the molecule had collapsed into a more compact form. At the surface of the bilayer, loss of helicity was restricted to the C-terminal third of the molecule and the rod-shaped structure of the peptide was retained. In the surface simulation about 10% of the peptide/water H-bonds were replaced by peptide/lipid H-bonds. These simulations suggest that some degree of stabilization of an amphipathic alpha-helix occurs at a bilayer surface even without interactions between hydrophobic side chains and the acyl chain core of the bilayer.     

High-resolution electrophysiology on a chip: Transient dynamics of alamethicin channel formation

Microstructured planar substrates have been shown to be suitable for patch clamp recording from both whole cells and isolated patches of membrane, as well as for measurements from planar lipid bilayers. Here, we further explore this technology with respect to high-resolution, low noise single-channel recording. Using solvent-free lipid bilayers from giant unilamellar vesicles obtained by electro-swelling, we recorded channels formed by the peptaibol alamethicin, a well-studied model system for voltage-dependent channels, focusing on the transient dynamics of single-channel formation upon application of a voltage step. With our setup, we were able to distinctly resolve dwell times well below 100 mus and to perform a thorough statistical analysis of alamethicin gating. Our results show good agreement with models that do not rely on the existence of non-conducting preaggregate states. Microstructured apertures in glass substrates appear promising with respect to future experiments on cellular ion channels reconstituted in suspended lipid membranes.     

Signal transduction across alamethicin ion channels in the presence of noise.

We have studied voltage-dependent ion channels of alamethicin reconstituted into an artificial planar lipid bilayer membrane from the point of view of electric signal transduction. Signal transduction properties of these channels are highly sensitive to the external electric noise. Specifically, addition of bandwidth-restricted "white" noise of 10-20 mV (r.m.s.) to a small sine wave input signal increases the output signal by approximately 20-40 dB conserving, and even slightly increasing, the signal-to-noise ratio at the system output. We have developed a small-signal adiabatic theory of stochastic resonance for a threshold-free system of voltage-dependent ion channels. This theory describes our main experimental findings giving good qualitative understanding of the underlying mechanism. It predicts the right value of the output signal-to-noise ratio and provides a reliable estimate for the noise intensity corresponding to its maximum. Our results suggest that the alamethicin channel in a lipid bilayer is a good model system for studies of mechanisms of primary electrical signal processing in biology showing an important feature of signal transduction improvement by a fluctuating environment.     

Template-free self-assembling fullerene and lipopeptide conjugates of alamethicin form voltage-dependent ion channels of remarkable stability and activity.

N- and C-terminally modified with fullerene or lipopeptide alamethicin molecules were designed for the formation of template-free, self-assembling, voltage-dependent ion conducting channels. The automated solid phase synthesis of the alamethicin-F30 sequence was performed by in situ fluoride activation on 2-chlorotritylchloride-polystyrene resin and the conjugation with fullerenes-C60 and -C70 was carried out in solution. Voltage-dependent bilayer experiments revealed preferred channel sizes for C-terminal alamethicin F30-fullerene-C60 and -C70 conjugates and higher activity compared with native alamethicin, whereas N-terminally linked fullerene balls destabilize pore formation. C-terminal alamethicin F30-fullerene-C70 conjugates show pore states with remarkably long lifetimes of seconds. C-terminal lipopeptide conjugates of alamethicin were prepared by coupling via short peptide spacers with synthetic tripalmitoyl-S-glyceryl-cysteine. which represents the strong membrane anchoring N-terminus of bacterial lipoprotein. Alamethicin-lipopeptide conjugates exhibit high channel forming activities, whereby they self-assemble and adopt preferred pore states with extremely long lifetimes. The novel membrane modifying peptaibol constructs are valuable lead compounds for developments in sensorics related to transmembrane ion conductance.     

High-resolution electrophysiology on a chip: Transient dynamics of alamethicin channel formation

Microstructured planar substrates have been shown to be suitable for patch clamp recording from both whole cells and isolated patches of membrane, as well as for measurements from planar lipid bilayers. Here, we further explore this technology with respect to high-resolution, low noise single-channel recording. Using solvent-free lipid bilayers from giant unilamellar vesicles obtained by electro-swelling, we recorded channels formed by the peptaibol alamethicin, a well-studied model system for voltage-dependent channels, focusing on the transient dynamics of single-channel formation upon application of a voltage step. With our setup, we were able to distinctly resolve dwell times well below 100 μs and to perform a thorough statistical analysis of alamethicin gating. Our results show good agreement with models that do not rely on the existence of non-conducting preaggregate states. Microstructured apertures in glass substrates appear promising with respect to future experiments on cellular ion channels reconstituted in suspended lipid membranes.     

Asymmetrical ion-channel model inferred from two-dimensional crystallization of a peptide antibiotic

The structural organization of ion channels formed in lipid membranes by amphiphilic alpha-helical peptides is deduced by applying direct structural methods to different lipid/alamethicin systems. Alamethicin represents a hydrophobic alpha-helical peptide antibiotic forming voltage-gated ion channels in lipid membranes. Here the first direct evidence for the existence of large-scale two-dimensional crystalline domains of alamethicin helices, oriented parallel to the air/water interface, is presented using synchrotron x-ray diffraction, fluorescence microscopy, and surface pressure/area isotherms. Proofs are obtained that the antibiotic peptide injected into the aqueous phase under phospholipid monolayers penetrates these monolayers, phase separates, and forms domains within the lipid environment, keeping the same, parallel orientation of the alpha-helices with respect to the phospholipid/water interface. A new asymmetrical, "lipid-covered ring" model of the voltage-gated ion channel of alamethicin is inferred from the structural results presented, and the mechanism of ion-channel formation is discussed.     

An anion-selective channel from the Pseudomonas aeruginosa outer membrane

Protein P from Pseudomonas aeruginosa outer membrane was reconstituted in lipid bilayer membranes from diphytanoylphosphatidylcholine. The reconstitution resulted in the formation of anion-selective channels with a conductance of 160 pS for 0.1 M chloride solution. The channels were at least 100-times more selective for anions than for cations as judged from zero-current membrane potentials. The single-channel conductance was dependent on the size of the different anions and saturated at higher salt concentrations suggesting single ion occupancy of the protein P channel.     

haemolysin of Escherichia coli: Comparison of pore-forming properties between chromosome and plasmid-encoded haemolysins

Abstract Lipid bilayer experiments were performed with chromosome-encoded haemolysin of Escherichia coli . The addition of the toxin to the aqueous phase bathing lipid bilayer membranes of asolectin resulted in the formation of transient ion-permeable channels with two states at small transmembrane voltages. One is prestate (single-channel conductance 40 pS in 0.15 M KCl) of the open state, which had a single-channel conductance of 420 pS in 0.15 M KCl and a mean lifetime of 30 s. Membranes formed of pure lipids were rather inactive targets for this haemolysin. Experiments with different salts suggested that the haemolysin channel was highly cation-selective at neutral pH. The mobility sequence of the cations in the channel was similar if not identical to their mobility sequence in the aqueous phase. The single-channel data were consistent with a wide, water-filled channel with an estimated minimal diameter of about 1 nm. The pore-forming properties of chromosome-encoded haemolysin were compared with those of plasmid-encoded haemolysin. Both toxins share common features, oligomerize probably to form pores in lipid bilayer membranes. Both types of haemolysin channels have similar properties but different lifetimes.     

A tethered bilayer sensor containing alamethicin channels and its detection of amiloride based inhibitors

Alamethicin, a small transmembrane peptide, inserts into a tethered bilayer membrane (tBLM) to form ion channels, which we have investigated using electrical impedance spectroscopy. The number of channels formed is dependent on the incubation time, concentration of the alamethicin and the application of DC voltage. The properties of the ion channels when formed in tethered bilayers are similar to those for such channels assembled into black lipid membranes (BLMs). Furthermore, amiloride and certain analogs can inhibit the channel pores, formed in the tBLMs. The potency and concentration of the inhibitors can be determined by measuring the change of impedance. Our work illustrates the possibility of using a synthetic tBLM for the study of small peptide voltage dependent ion channels. A potential application of such a device is as a screening tool in drug discovery processes.     

Storable droplet interface lipid bilayers for cell-free ion channel studies

An artificially created lipid bilayer is an important platform in studying ion channels and engineered biosensor applications. However, a lipid bilayer created using conventional techniques is fragile and short-lived, and the measurement of ion channels requires expertise and laborious procedures, precluding practical applications. Here, we demonstrate a storable droplet lipid bilayer precursor frozen with ion channels, resulting in a droplet interface bilayer upon thawing. A small vial with an aqueous droplet in organic solution was flash frozen in -80 °C methanol immediately after an aqueous droplet was introduced into the organic solution and gravity draws the droplet down to the interface upon thawing. A lipid bilayer created along the interface using this method had giga-ohm resistance and typical specific capacitance values. The noise level of this system is favorably comparable to the conventional system. The subsequent incorporation of ion channels, alpha-hemolysin and gramicidin A, showed typical conductance values consistent with those in previous literatures. This novel system to create a lipid bilayer as a whole can be automated from its manufacture to use and indefinitely stored when frozen. As a result, ion channel measurements can be carried out in any place, increasing the accessibility of ion channel studies as well as a number of applications, such as biosensors, ion channel drug screening, and biophysical studies.     

Pressure effects on alamethicin conductance in bilayer membranes.

We report here the first observations of the effects of elevated hydrostatic pressure on the kinetics of bilayer membrane conductance induced by the pore-forming antibiotic, alamethicin. Bacterial phosphatidylethanolamine-squalene bilayer membranes were formed by the apposition of lipid monolayers in a vessel capable of sustaining hydrostatic pressures in the range, 0.1-100 MPa (1-1,000 atm). Principal observations were (a) the lifetimes of discrete conductance states were lengthened with increasing pressure, (b) both the onset and decay of alamethicin conductance accompanying application and removal of supra-threshold voltage pulses were slowed with increasing pressure, (c) the onset of alamethicin conductance at elevated pressure became distinctly sigmoidal, suggesting an electrically silent intermediate state of channel assembly, (d) the magnitudes of the discrete conductance levels observed did not change with pressure, and, (e) the voltage threshold for the onset of alamethicin conductance was not altered by pressure. Apparent activation volumes for both the formation and decay of conducting states were positive and of comparable magnitude, namely, approximately 100 A3/event. Observation d indicates that channel geometry and the kinetics of ion transport through open channels were not affected by pressure in the range employed. The remaining observations indicate that, while the relative positions of free-energy minima characterizing individual conducting states at a given voltage were not modified by pressure, the heights of intervening potential maxima were increased by its application.     

Lipid dependence of the channel properties of a colicin E1-lipid toroidal pore

Colicin E1 belongs to a group of bacteriocins whose cytotoxicity toward Escherichia coli is exerted through formation of ion channels that depolarize the cytoplasmic membrane. The lipid dependence of colicin single-channel conductance demonstrated intimate involvement of lipid in the structure of this channel. The colicin formed "small" conductance 60-picosiemens (pS) channels, with properties similar to those previously characterized, in 1,2-dieicosenoyl-sn-glycero-3-phosphocholine (C20) or thinner membranes, whereas it formed a novel "large" conductance 600-pS state in thicker 1,2-dierucoyl-sn-glycero-3-phosphocholine (C22) bilayers. Both channel states were anion-selective and voltage-gated and displayed a requirement for acidic pH. Lipids having negative spontaneous curvature inhibited the formation of both channels but increased the ratio of open 600 pS to 60 pS conductance states. Different diameters of small and large channels, 12 and 16 A, were determined from the dependence of single-channel conductance on the size of nonelectrolyte solute probes. Colicin-induced lipid "flip-flop" and the decrease in anion selectivity of the channel in the presence of negatively charged lipids implied a significant contribution of lipid to the structure of the channel, most readily described as toroidal organization of lipid and protein to form the channel pore.     

Bilayer reconstitution of voltage-dependent ion channels using a microfabricated silicon chip

Painted bilayers containing reconstituted ion channels serve as a well defined model system for electrophysiological investigations of channel structure and function. Horizontally oriented bilayers with easy solution access to both sides were obtained by painting a phospholipid:decane mixture across a cylindrical pore etched into a 200-microm thick silicon wafer. Silanization of the SiO(2) layer produced a hydrophobic surface that promoted the adhesion of the lipid mixture. Standard lithographic techniques and anisotropic deep-reactive ion etching were used to create pores with diameters from 50 to 200 microm. The cylindrical structure of the pore in the partition and the surface treatment resulted in stable bilayers. These were used to reconstitute Maxi K channels in the 100- and 200-microm diameter pores. The electrophysiological characteristics of bilayers suspended in microchips were comparable with that of other bilayer preparations. The horizontal orientation and good voltage clamping properties make the microchip bilayer method an excellent system to study the electrical properties of reconstituted membrane proteins simultaneously with optical probes.     

Discovery of a novel channel-forming protein in the cell wall of the non-pathogenic Nocardia corynebacteroides

Detergent extracts of whole cells of the Gram-positive, non-pathogenic, strictly aerobic bacterium Nocardia corynebacteroides contain channel-forming activity. The protein responsible for channel formation was identified using lipid bilayer experiments. It was purified to homogeneity and had an apparent molecular mass of about 134 kDa on SDS-PAGE when it was solubilized at 40 degrees C. When the 134 kDa protein was heated to 100 degrees C for 10 min in sample buffer, it dissociated into subunits with a molecular mass of about 23 kDa and focused at pI of 4.5 during isoelectric focusing. The pure 134 kDa protein was able to increase the specific conductance of artificial lipid bilayer membranes from phosphatidylcholine-phosphatidylserine mixtures by the formation of ion-permeable channels. The channels had an average single-channel conductance of 5.5 nS in 1 M KCl and were found to be cation-selective. Asymmetric addition of the 134 kDa protein to lipid bilayer membranes resulted in an asymmetric voltage-dependence. The analysis of the single-channel conductance as a function of cation radii using the Renkin correction factor and the effect of negative charges on channel conductance suggested that the diameter of the cell wall porin is about 1.0 nm. The channel characteristics of the cell wall channel of N. corynebacteroides were compared with those of other members of the mycolata. They share common features because they are composed of small molecular mass subunits and form large and water-filled channels.     

Electrophysiological interrogation of asymmetric droplet interface bilayers reveals surface-bound alamethicin induces lipid flip-flop

The droplet interface bilayer (DIB) method offers simple control over initial leaflet compositions in model membranes, enabling an experimental path to filling gaps in our knowledge about the interplay between compositional lipid asymmetry, membrane properties, and the behaviors of membrane-active species. Yet, the stability of lipid leaflet asymmetry in DIBs has received very little attention, particularly in the presence of peptides and ion channels that are often studied in DIBs. Herein, we demonstrate for the first time parallel, capacitance-based measurements of intramembrane potential with arrays of asymmetric DIBs assembled in a microfluidic device to characterize the stability of leaflet asymmetry over many hours in the presence and absence of membrane-active peptides. DIBs assembled from opposing monolayers of the ester (DPhPC) and ether (DOPhPC) forms of diphytanoyl-phosphatidylcholine yielded asymmetric bilayers with leaflet compositions that were stable for at least 18?h as indicated by a stable |137?mV| intramembrane potential. In contrast, the addition of surface-bound alamethicin peptides caused a gradual, concentration-dependent decrease in the magnitude of the dipole potential difference. Intermittent current-voltage measurements revealed that alamethicin in asymmetric DIBs also shifts the threshold voltage required to drive peptide insertion and ion channel formation. These outcomes take place over the course of 1 to 5?h after membrane formation, and suggest that alamethicin peptides promote lipid flip-flop, even in the un-inserted, surface-bound state, by disordering lipids in the monolayer to which they bind. Moreover, this methodology establishes the use of parallel electrophysiology for efficiently studying membrane asymmetry in arrays of DIBs.     

A novel method for artificial lipid-bilayer formation

Many proposals have been made regarding the development of biosensors using single-channel recording with an artificial planar bilayer. The fragile nature of bilayer membranes is the major difficulty for the application of the artificial bilayer technique to the development of biosensors. We have developed an apparatus that promptly forms artificial bilayers. This technique is more efficient than other techniques for forming artificial bilayers. Bilayer membranes could be formed within 10s requiring 1 microl of analyte solution to record single-channel currents using our apparatus. A bilayer was formed by pressing the membrane on an agarose layer with hydraulic pressure. With this novel apparatus, we have recorded single-channel currents of various types of channels such as the BK-channel, the nicotinic receptor channel and the ryanodine receptor channel. The properties of the channels determined with this novel technique agreed well with those determined with conventional techniques.     

Conductivity noise in transmembrane ion channels due to ion concentration fluctuations via diffusion.

A Green's function approach is developed from first principles to evaluate the power spectral density of conductance fluctuations caused by ion concentration fluctuations via diffusion in an electrolyte system. This is applied to simple geometric models of transmembrane ion channels to obtain an estimate of the magnitude of ion concentration fluctuation noise in the channel current. Pure polypeptide alamethicin forms stable ion channels with multiple conductance states in artificial phospholipid bilayers isolated onto tips of micropipettes with gigaohm seals. In the single-channel current recorded by voltage-clamp techniques, excess noise was found after the background instrumental noise and the intrinsic Johnson and shot noises were removed. The noise que to ion concentration fluctuations via diffusion was isolated by the dependence of the excess current noise on buffer ion concentration. The magnitude of the concentration fluctuation noise derived from experimental data lies within limits estimated using our simple geometric channel models. Variation of the noise magnitude for alamethicin channels in various conductance states agrees with theoretical prediction.     

Experimental search for combined AC and DC magnetic field effects on ion channels

The hypothesis that specific combinations of DC and low frequency AC magnetic fields at so-called cyclotron-resonance conditions could affect the transport of ions through ion channels, or alter the kinetics of ion channels (opening and closing rates), has been tested. As a model system, the ion channels formed by gramicidin A incorporated in lipid bilayer membranes were studied. No significant changes in channel conductance, average lifetime, or formation rate as a function of applied fields could be detected over a wide range of frequencies and field strengths. Experiments were carried out to measure the time-resolved single-channel events and the average conductances of many-channel events in the presence of K⁺ and H⁺ ions. The channel blocking effect of Ca⁺⁺ was also studied. © 1993 Wiley-Liss. Inc.     

Alamethicin channels incorporated into frog node of ranvier: calcium-induced inactivation and membrane surface charges

Alamethicin, a peptide antibiotic, partitions into artificial lipid bilayer membranes and into frog myelinated nerve membranes, inducing a voltage-dependent conductance. Discrete changes in conductance representing single-channel events with multiple open states can be detected in either frog node or lipid bilayer membranes. In 120 mM salt solution, the average conductance of a single channel is approximately 600 pS. The channel lifetimes are roughly two times longer in the node membrane than in a phosphatidylethanolamine bilayer at the same membrane potential. With 2 or 20 mM external Ca and internal CsCl, the alamethicin-induced conductance of frog nodal membrane inactivates. Inactivation is abolished by internal EGTA, suggesting that internal accumulation of calcium ions is responsible for the inactivation, through binding of Ca to negative internal surface charges. As a probe for both external and internal surface charges, alamethicin indicates a surface potential difference of approximately -20 to -30 mV, with the inner surface more negative. This surface charge asymmetry is opposite to the surface potential distribution near sodium channels.     

Probing conformational changes of gramicidin ion channels by single-molecule patch-clamp fluorescence microscopy

Complex conformational changes influence and regulate the dynamics of ion channels. Such conformational changes are stochastic and often inhomogeneous, which makes it extremely difficult, if not impossible, to characterize them by ensemble-averaged experiments or by single-channel recordings of the electric current that report the open-closed events but do not specifically probe the associated conformational changes. Here, we report our studies on ion channel conformational changes using a new approach, patch-clamp fluorescence microscopy, which simultaneously combines single-molecule fluorescence spectroscopy and single-channel current recordings to probe the open-closed transitions and the conformational dynamics of individual ion channels. We demonstrate patch-clamp fluorescence microscopy by measuring gramicidin ion channel conformational changes in a lipid bilayer formed at a patch-clamp micropipette tip under a buffer solution. By measuring single-pair fluorescence resonance energy transfer and fluorescence self-quenching from dye-labeled gramicidin channels, we observed that the efficiency of single-pair fluorescence resonance energy transfer and self-quenching is widely distributed, which reflects a broad distribution of conformations. Our results strongly suggest a hitherto undetectable correlation between the multiple conformational states of the gramicidin channel and its closed and open states in a lipid bilayer.