Breaking down the wall: fractionation of mycobacteria

Mycobacterium spp. possess a complex cell envelope that consists of a plasma membrane, a peptidoglycan-arabinogalactan complex which in turn is esterified by mycolic acids that form with other non-bound lipids an asymmetric permeability barrier and an outer layer, also called a capsule in the case of pathogenic species. In order to investigate the functional roles of the cell envelope components, especially those of the major pathogens Mycobacterium tuberculosis and Mycobacterium leprae, it is necessary to fractionate the envelope by breaking the unusual wall that covers these bacteria. To this aim we first compared the efficiency of high pressure (cell disrupter/French press) with those of pathogen-compatible breakage methods such as sonication, bead beater and lysozyme treatment using the non-pathogenic Mycobacterium smegmatis. When the distribution of various specific markers of the cell envelope compartments, which include mycolic acids, arabinose, NADH oxidase activity, cell wall and cytosolic proteins, were determined sonication combined with lysozyme treatment was found to be the best option. The protocol of subcellular fractionation was then validated for pathogenic species by applying the method to Mycobacterium bovis BCG cells, an attenuated strain of the M. tuberculosis complex.     

Cell envelope composition and organisation in the genus Rhodococcus

A knowledge of the organisation of the rhodococcal cell envelope is of fundamental importance if the environmental and biotechnological significance of these bacteria are to be understood and succesfully exploited. The genus Rhodococcus belongs to a distinctive suprageneric taxon, the mycolata, which includes among others the genera Corynebacterium, Mycobacterium and Nocardia. Members of this taxon exhibit an unusual complexity in their cell envelope composition and organisation compared to other Gram-positive bacteria. Models that describe the architecture of the mycobacterial cell envelope are extrapolated here to provide a model of the rhodococcal cell envelope. The rhodococcal cell envelope is dominated by the presence of an arabinogalactan cell wall polysaccharide and large 2-alkyl 3-hydroxy branched-chain fatty acids, the mycolic acids, which are covalently assembled into a peptidoglycan–arabinogalactan–mycolic acid matrix. This review further emphasises that the mycolic acids in this complex form the basis of an outer lipid permeability barrier. The localisation and roles of other cell envelope components, notably complex free lipids, lipoglycans, proteins and lipoproteins are also considered.     

Cellular impermeability and uptake of biocides and antibiotics in gram-positive bacteria and mycobacteria

Gram-positive bacteria possess a permeable cell wall that usually does not restrict the penetration of antimicrobials. However, resistance due to restricted penetration can occur, as illustrated by vancomycin-intermediate resistant Staphylococcus aureus strains (VISA) which produce a markedly thickened cell wall. Alterations in these strains include increased amounts of nonamidated glutamine residues in the peptidoglycan and it is suggested that the resistance mechanism involves 'affinity trapping' of vancomycin in the thickened cell wall. VISA strains have reduced doubling times, lower sensitivity to lysostaphin and reduced autolytic activity, which may reflect changes in the D-alanyl ester content of the wall and membrane teichoic acids. Mycobacterial cell walls have a high lipid content, which is assumed to act as a major barrier to the penetration of antimicrobial agents. Relatively hydrophobic antibiotics such as rifampicin and fluoroquinolones may be able to cross the cell wall by diffusion through the hydrophobic bilayer composed of long chain length mycolic acids and glycolipids. Hydrophilic antibiotics and nutrients cannot diffuse across this layer and are thought to use porin channels which have been reported in many species of mycobacteria. The occurrence of porins in a lipid bilayer supports the view that the mycobacterial wall has an outer membrane analogous to that of gram-negative bacteria. However, mycobacterial porins are much less abundant than in the gram-negative outer membrane and allow only low rates of uptake for small hydrophilic nutrients and antibiotics.     

Detailed structural and quantitative analysis reveals the spatial organization of the cell walls of in vivo grown Mycobacterium leprae and in vitro grown Mycobacterium tuberculosis

The cell wall of mycobacteria consists of an outer membrane, analogous to that of gram-negative bacteria, attached to the peptidoglycan (PG) via a connecting polysaccharide arabinogalactan (AG). Although the primary structure of these components is fairly well deciphered, issues such as the coverage of the PG layer by covalently attached mycolates in the outer membrane and the spatial details of the mycolic acid attachment to the arabinan have remained unknown. It is also not understood how these components work together to lead to the classical acid-fast staining of mycobacteria. Because the majority of Mycobacterium tuberculosis bacteria in established experimental animal infections are acid-fast negative, clearly cell wall changes are occurring. To address both the spatial properties of mycobacterial cell walls and to begin to study the differences between bacteria grown in animals and cultures, the cell walls of Mycobacterium leprae grown in armadillos was characterized and compared with that of M. tuberculosis grown in culture. Most fundamentally, it was determined that the cell wall of M. leprae contained significantly more mycolic acids attached to PG than that of in vitro grown M. tuberculosis (mycolate:PG ratios of 21:10 versus 16:10, respectively). In keeping with this difference, more arabinogalactan (AG) molecules, linking the mycolic acids to PG, were found. Differences in the structures of the AG were also found; the AG of M. leprae is smaller than that of M. tuberculosis, although the same basic structural motifs are retained.     

Direct visualization of the outer membrane of mycobacteria and corynebacteria in their native state

The cell envelope of mycobacteria, which include the causative agents of tuberculosis and leprosy, is crucial for their success as pathogens. Despite a continued strong emphasis on identifying the multiple chemical components of this envelope, it has proven difficult to combine its components into a comprehensive structural model, primarily because the available ultrastructural data rely on conventional electron microscopy embedding and sectioning, which are known to induce artifacts. The existence of an outer membrane bilayer has long been postulated but has never been directly observed by electron microscopy of ultrathin sections. Here we have used cryo-electron microscopy of vitreous sections (CEMOVIS) to perform a detailed ultrastructural analysis of three species belonging to the Corynebacterineae suborder, namely, Mycobacterium bovis BCG, Mycobacterium smegmatis, and Corynebacterium glutamicum, in their native state. We provide new information that accurately describes the different layers of the mycobacterial cell envelope and challenges current models of the organization of its components. We show a direct visualization of an outer membrane, analogous to that found in gram-negative bacteria, in the three bacterial species examined. Furthermore, we demonstrate that mycolic acids, the hallmark of mycobacteria and related genera, are essential for the formation of this outer membrane. In addition, a granular layer and a low-density zone typifying the periplasmic space of gram-positive bacteria are apparent in CEMOVIS images of mycobacteria and corynebacteria. Based on our observations, a model of the organization of the lipids in the outer membrane is proposed. The architecture we describe should serve as a reference for future studies to relate the structure of the mycobacterial cell envelope to its function.     

S-layer protein transport across the cell wall of Corynebacterium glutamicum: in vivo kinetics and energy requirements

Corynebacteria are Gram-positive bacteria with a very peculiar cell envelope structure as it is constituted of an inner membrane and an outer membrane-like structure. Protein secretion in Corynebacterium glutamicum was studied in vivo, using the S-layer protein PS2 as a model. We show that different variants of PS2 protein are exported through the whole cell envelope with a half-life ranging between 2 and 4 min, by a two-step mechanism. The first step, which is over after about 1.5 min, is ATP- and proton motive force-dependent and may correspond to translocation across the inner membrane via the 'Sec' machinery. The second step, across the cell wall and the outer mycolate layer, is rapid but independent of energy sources. This very efficient secretion process across the mycolate layer raises the question of the existence in this layer of a specific machinery.     

Direct Visualization by Cryo-EM of the Mycobacterial Capsular Layer: A Labile Structure Containing ESX-1-Secreted Proteins

The cell envelope of mycobacteria, a group of Gram positive bacteria, is composed of a plasma membrane and a Gram-negative-like outer membrane containing mycolic acids. In addition, the surface of the mycobacteria is coated with an ill-characterized layer of extractable, non-covalently linked glycans, lipids and proteins, collectively known as the capsule, whose occurrence is a matter of debate. By using plunge freezing cryo-electron microscopy technique, we were able to show that pathogenic mycobacteria produce a thick capsule, only present when the cells were grown under unperturbed conditions and easily removed by mild detergents. This detergent-labile capsule layer contains arabinomannan, α-glucan and oligomannosyl-capped glycolipids. Further immunogenic and proteomic analyses revealed that Mycobacterium marinum capsule contains high amounts of proteins that are secreted via the ESX-1 pathway. Finally, cell infection experiments demonstrated the importance of the capsule for binding to cells and dampening of pro-inflammatory cytokine response. Together, these results show a direct visualization of the mycobacterial capsular layer as a labile structure that contains ESX-1-secreted proteins.     

Reevaluation of envelope profiles and cytoplasmic ultrastructure of mycobacteria processed by conventional embedding and freeze-substitution protocols.

The cell envelope architectures and cytoplasmic structures of Mycobacterium aurum CIPT 1210005, M. fortuitum, M. phlei 425, and M. thermoresistible ATCC 19527 were compared by conventional embedding and freeze-substitution methods. To ascertain the integrity of cells during each stage of the processing regimens, [1-14C]acetate was incorporated into the mycolic acids of mycobacterial walls, and the extraction of labeled mycolic acids was monitored by liquid scintillation counting. Radiolabeled mycolic acids were extracted by both processing methods; however, freeze-substitution resulted in the extraction of markedly less radiolabel. During conventional processing of cells, most of the radiolabel was extracted during the dehydration stage, whereas postsubstitution washes in acetone yielded the greatest loss of radiolabel during freeze-substitution. Conventional embedding frequently produced cells with condensed fibrous nucleoids and occasional mesosomes. Their cell walls were relatively thick (approximately 25 nm) but lacked substance. Freeze-substituted cells appeared more robust, with well-dispersed nucleoids and ribosomes. The walls of all species were much thinner than those of their conventionally processed counterparts, but these stained well, which was an indication of more wall substance; the fabric of these walls, in particular the plasma membrane, appeared highly condensed and tightly apposed to the peptidoglycan. Some species possessed a thick, irregular outer layer that was readily visualized in the absence of exogenous stabilizing agents by freeze-substitution. Since freeze-substituted mycobacteria retained a greater percentage of mycolic acids in their walls, and probably other labile wall and cytoplasmic constituents, we believe that freeze-substitution provides a more accurate image of structural organization in mycobacteria than that achieved by conventional procedures.     

Unsupported planar lipid membranes formed from mycolic acids of Mycobacterium tuberculosis

The cell wall of mycobacteria includes a thick, robust, and highly impermeable outer membrane made from long-chain mycolic acids. These outer membranes form a primary layer of protection for mycobacteria and directly contribute to the virulence of diseases such as tuberculosis and leprosy. We have formed in vitro planar membranes using pure mycolic acids on circular apertures 20 to 90 μm in diameter. We find these membranes to be long lived and highly resistant to irreversible electroporation, demonstrating their general strength. Insertion of the outer membrane channel MspA into the membranes was observed indicating that the artificial mycolic acid membranes are suitable for controlled studies of the mycobacterial outer membrane and can be used in nanopore DNA translocation experiments.     

Structure of the cell envelope of Halobacterium halobium

The structure of the isolated cell envelope of Halobacterium halobium is studied by X-ray diffraction, electron microscopy, and biochemical analysis. The envelope consists of the cell membrane and two layers of protein outside. The outer layer of protein shows a regular arrangement of the protein or glycoprotein particles and is therefore identified as the cell wall. Just outside the cell membrane is a 20 A-thick layer of protein. It is a third structure in the envelope, the function of which may be distinct from that of the cell membrane and the cell wall. This inner layer of protein is separated from the outer protein layer by a 65 A-wide space which has an electron density very close to that of the suspending medium, and which can be etched after freeze-fracture. The space is tentatively identified as the periplasmic space. At NaCl concentrations below 2.0 M, both protein layers of the envelope disintegrate. Gel filtration and analytical ultracentrifugation of the soluble components from the two protein layers reveal two major bands of protein with apparent mol wt of approximately 16,000 and 21,000. At the same time, the cell membrane stays essentially intact as long as the Mg++ concentration is kept at treater than or equal to 20 mM. The cell membrane breaks into small fragments when treated with 0.1 M NaCl and EDTA, or with distilled water, and some soluble proteins, including flavins and cytochromes, are released. The cell membrane apparently has an asymmetric core of the lipid bilayer.     

Mycobacteriophage Lysin B is a novel mycolylarabinogalactan esterase

Mycobacteriophages encounter a unique problem among phages of Gram-positive bacteria, in that lysis must not only degrade the peptidoglycan layer but also circumvent a mycolic acid-rich outer membrane covalently attached to the arabinogalactan–peptidoglycan complex. Mycobacteriophages accomplish this by producing two lysis enzymes, Lysin A (LysA) that hydrolyses peptidoglycan, and Lysin B (LysB), a novel mycolylarabinogalactan esterase, that cleaves the mycolylarabinogalactan bond to release free mycolic acids. The D29 LysB structure shows an α/β hydrolase organization with a catalytic triad common to cutinases, but which contains an additional four-helix domain implicated in the binding of lipid substrates. Whereas LysA is essential for mycobacterial lysis, a Giles Δ lysB mutant mycobacteriophage is viable, but defective in the normal timing, progression and completion of host cell lysis. We propose that LysB facilitates lysis by compromising the integrity of the mycobacterial outer membrane linkage to the arabinogalactan–peptidoglycan layer.     

Electron Microscopic Studies on the Outer Layers of Staphylococcus aureus Using a Lytic Enzyme from Flavobacterium

The structure of the outer layers (cell wall and membrane) of Staphylococcus aureus was studied by electron microscope using a bacteriolytic enzyme from Flavobacterium sp. called the L-11 enzyme. Comparative studies on the morphology of bacteria before and after treatment with this enzyme and cell wall and membrane fractions obtained from bacteria after the enzyme treatment led to the following conclusions. (1) The cell wall of S. aureus is composed of morphologically distinct two layers which are both susceptible to the L-11 enzyme. (2) Between the cell wall and membrane, there is an electron opaque region which could not be stained using any of the methods tested. (3) Before treatment of bacteria with the enzyme the cell membrane could not be seen clearly. However, after enzyme treatment the membrane was clearly seen. (4) The infolding of the inner layer of the cell wall, forming a structure like a mesosome, was liberated by extensive enzyme treatment.     

Rv1698 of Mycobacterium tuberculosis represents a new class of channel-forming outer membrane proteins

Mycobacteria contain an outer membrane composed of mycolic acids and a large variety of other lipids. Its protective function is an essential virulence factor of Mycobacterium tuberculosis. Only OmpA, which has numerous homologs in Gram-negative bacteria, is known to form channels in the outer membrane of M. tuberculosis so far. Rv1698 was predicted to be an outer membrane protein of unknown function. Expression of rv1698 restored the sensitivity to ampicillin and chloramphenicol of a Mycobacterium smegmatis mutant lacking the main porin MspA. Uptake experiments showed that Rv1698 partially complemented the permeability defect of the M. smegmatis porin mutant for glucose. These results indicated that Rv1698 provides an unspecific pore that can partially substitute for MspA. Lipid bilayer experiments demonstrated that purified Rv1698 is an integral membrane protein that indeed produces channels. The main single channel conductance is 4.5 +/- 0.3 nanosiemens in 1 M KCl. Zero current potential measurements revealed a weak preference for cations. Whole cell digestion of recombinant M. smegmatis with proteinase K showed that Rv1698 is surface-accessible. Taken together, these experiments demonstrated that Rv1698 is a channel protein that is likely involved in transport processes across the outer membrane of M. tuberculosis. Rv1698 has single homologs of unknown functions in Corynebacterineae and thus represents the first member of a new class of channel proteins specific for mycolic acid-containing outer membranes.     

Protein cell surface display in Gram-positive bacteria: from single protein to macromolecular protein structure

In the course of evolution, Gram-positive bacteria, defined here as prokaryotes from the domain Bacteria with a cell envelope composed of one biological membrane (monodermita) and a cell wall composed at least of peptidoglycan and covalently linked teichoic acids, have developed several mechanisms permitting to a cytoplasmic synthesized protein to be present on the bacterial cell surface. Four major types of cell surface displayed proteins are currently recognized: (i) transmembrane proteins, (ii) lipoproteins, (iii) LPXTG-like proteins and (iv) cell wall binding proteins. The subset of proteins exposed on the bacterial cell surface, and thus interacting with extracellular milieu, constitutes the surfaceome. Here, we review exhaustively the current molecular mechanisms involved in protein attachment within the cell envelope of Gram-positive bacteria, from single protein to macromolecular protein structure.     

Ultrastructure of the Bacteroides nodosus cell envelope layers and surface.

The surface structure and cell envelope layers of various virulent Bacteroides nodosus strains were examined by light microscopy and by electron microscopy by using negative staining, thin-section, and freeze-fracture-etch techniques. Three surface structures were described: pili and a diffuse material, both of which emerged from one or both poles of the bacteria (depending on the stage of growth and division), and large rodlike structures (usually 30 to 40 nm in diameter) associated with a small proportion of the bacterial population. No capsule was detected. The cell envelope consisted of four layers: a plasma membrane, a peptidoglycan layer, an outer membrane, and an outermost additional layer. The additional layer was composed of subunits, generally hexagonally packed with center-to-center spacing of 6 to 7 nm. The outer membrane and plasma membrane freeze-fractured through their hydrophobic regions revealing four fracture faces with features similar to those of other gram-negative bacteria. However, some unusual features were seen on the fracture faces of the outer membrane: large raised ring structure (11 to 12 nm in diameter) on cw 3 at the poles of the bacteria; complementary pits or ring-shaped depressions on cw 2; and small raised ring structures (7 to 8 nm in diameter) all over cw 2.     

Towards understanding the functional diversity of cell wall mycolic acids of Mycobacterium tuberculosis

Mycolic acids constitute the waxy layer of the outer cell wall of Mycobacterium spp. and a few other genera. They are diverse in structure, providing a unique chromatographic foot-print for almost each of the more than 70 Mycobacterium species. Although mainly esterified to cell wall arabinogalactan, trehalose or glucose, some free mycolic acid is secreted during in vitro growth of Mycobacterium tuberculosis. In M. tuberculosis, α-, keto- and methoxy-mycolic acids are the main classes, each differing in their ability to attract neutrophils, induce foamy macrophages or adopt an antigenic structure for antibody recognition. Of interest is their particular relationship to cholesterol, discovered by their ability to attract cholesterol, to bind Amphotericin B or to be recognised by monoclonal antibodies that cross-react with cholesterol. The structural elements that determine this diverse functionality include the carboxylic acid in the mycolic motif, as well as the nature and stereochemistry of the two functional groups in the merochain. The functional diversity of mycolic acid classes implies that much information may be contained in the selective expression and secretion of mycolic acids to establish tuberculosis after infection of the host. Their cholesteroid nature may relate to how they utilize host cholesterol for their persistent survival.     

X-ray crystal structure of Mycobacterium tuberculosis beta-ketoacyl acyl carrier protein synthase II (mtKasB)

Mycolic acids are long chain alpha-alkyl branched, beta-hydroxy fatty acids that represent a characteristic component of the Mycobacterium tuberculosis cell wall. Through their covalent attachment to peptidoglycan via an arabinogalactan polysaccharide, they provide the basis for an essential outer envelope membrane. Mycobacteria possess two fatty acid synthases (FAS); FAS-I carries out de novo synthesis of fatty acids while FAS-II is considered to elongate medium chain length fatty acyl primers to provide long chain (C(56)) precursors of mycolic acids. Here we report the crystal structure of Mycobacterium tuberculosis beta-ketoacyl acyl carrier protein synthase (ACP) II mtKasB, a mycobacterial elongation condensing enzyme involved in FAS-II. This enzyme, along with the M. tuberculosis beta-ketoacyl ACP synthase I mtKasA, catalyzes the Claisen-type condensation reaction responsible for fatty acyl elongation in FAS-II and are potential targets for development of novel anti-tubercular drugs. The crystal structure refined to 2.4 A resolution revealed that, like other KAS-II enzymes, mtKasB adopts a thiolase fold but contains unique structural features in the capping region that may be crucial to its preference for longer fatty acyl chains than its counterparts from other bacteria. Modeling of mtKasA using the mtKasB structure as a template predicts the overall structures to be almost identical, but a larger entrance to the active site tunnel is envisaged that might contribute to the greater sensitivity of mtKasA to the inhibitor thiolactomycin (TLM). Modeling of TLM binding in mtKasB shows that the drug fits the active site poorly and results of enzyme inhibition assays using TLM analogues are wholly consistent with our structural observations. Consequently, the structure described here further highlights the potential of TLM as an anti-tubercular lead compound and will aid further exploration of the TLM scaffold towards the design of novel compounds, which inhibit mycobacterial KAS enzymes more effectively.     

Mycobacteriophage endolysins: diverse and modular enzymes with multiple catalytic activities

The mycobacterial cell wall presents significant challenges to mycobacteriophages--viruses that infect mycobacterial hosts--because of its unusual structure containing a mycolic acid-rich mycobacterial outer membrane attached to an arabinogalactan layer that is in turn linked to the peptidoglycan. Although little is known about how mycobacteriophages circumvent these barriers during the process of infection, destroying it for lysis at the end of their lytic cycles requires an unusual set of functions. These include Lysin B proteins that cleave the linkage of mycolic acids to the arabinogalactan layer, chaperones required for endolysin delivery to peptidoglycan, holins that regulate lysis timing, and the endolysins (Lysin As) that hydrolyze peptidoglycan. Because mycobacterial peptidoglycan contains atypical features including 3→3 interpeptide linkages, it is not surprising that the mycobacteriophage endolysins also have non-canonical features. We present here a bioinformatic dissection of these lysins and show that they are highly diverse and extensively modular, with an impressive number of domain organizations. Most contain three domains with a novel N-terminal predicted peptidase, a centrally located amidase, muramidase, or transglycosylase, and a C-terminal putative cell wall binding domain.     

Lipoarabinomannan localization and abundance during growth of Mycobacterium smegmatis

Lipoarabinomannan (LAM) is a structurally heterogeneous amphipathic lipoglycan present in Mycobacterium spp. and other actinomycetes, which constitutes a major component of the cell wall and exhibits a wide spectrum of immunomodulatory effects. Analysis of Mycobacterium smegmatis subcellular fractions and spheroplasts showed that LAM and lipomannan (LM) were primarily found in a cell wall-enriched subcellular fraction and correlated with the presence (or absence) of the mycolic acids in spheroplast preparations, suggesting that LAM and LM are primarily associated with the putative outer membrane of mycobacteria. During the course of these studies significant changes in the LAM/LM content of the cell wall were noted relative to the age of the culture. The LAM content of the M. smegmatis cell wall was dramatically reduced as the bacilli approached stationary phase, whereas LM, mycolic acid, and arabinogalactan content appeared to be unchanged. In addition, cell morphology and acid-fast staining characteristics showed variations with growth phase of the bacteria. In the logarithmic phase, the bacteria were found to be classic rod-shaped acid-fast bacilli, while in the stationary phase M. smegmatis lost the characteristic rod shape and developed a punctate acid-fast staining pattern with carbolfuchsin. The number of viable bacteria was independent of LAM content and phenotype. Taken together, the results presented here suggest that LAM is primarily localized with the mycolic acids in the cell wall and that the cellular concentration of LAM in M. smegmatis is selectively modulated with the growth phase.     

The structures of glycolipids isolated from the highly thermophilic bacterium Thermus thermophilus Samu-SA1

Thermophiles constitute a class of microorganisms able to grow at extremely elevated temperatures. Some of these species are classified as Gram-negative bacteria, because of the presence of an outer membrane in the cell envelope, which is located on the top of a thick murein layer. Unlike typical Gram-negative bacteria, the outer membranes of Thermus species are not composed of lipopolysaccharides but of peculiar glycolipids (GL), whose structures seem to be strictly involved in the adaptation to high temperatures. In this work, the complete structures of the major GL components from the cell envelope of the thermophilic bacterium Thermus thermophilus Samu-SA1 are presented. Protocols conventionally adopted for Gram-negative bacteria were used, and, for the first time, GL from Thermus were analyzed in their native form. Two GL and one phosphoglycolipid (PGL) were detected and characterized. The two GL, analyzed by nuclear magnetic resonance (NMR) spectroscopy and electrospray ionization Fourier transform ion cyclotron resonance (ESI FT-ICR) mass spectrometry, possessed the same tetrasaccharide structure linked to a glycerol unit or, alternatively, to a long-chain diol. Moreover, a PGL from Thermus was characterized for the first time, in which N-glyceroyl-heptadecaneamine was present. These molecules are chemically related to other GL from thermophile bacteria, in which they play a crucial role in the adaptation of cell membranes to heat.