Amplification of spontaneous emission of neon-like argon in a fast gas-filled capillary discharge

The evolution of the CAPEX facility and its basic diagnostics are described. The experiments carried out in the last modification of this facility accomplished with the demonstration of amplified spontaneous emission of neon-like argon (Ar⁸⁺) at the wavelength 46.88 nm. The first version of the facility, CAPEX1, operated with a plastic capillary and had a short high-power passive prepulse and an imperfect gas-filling system. In the second version, CAPEX2, a ceramic capillary was used, the prepulse amplitude was lowered, and the gas-filling system was improved. In the third, most successful version, CAPEX3, the capillary bending was reduced, a longer external prepulse was used, and the gas-filling system was further optimized. For each version, results of X-ray measurements are presented and interpreted.     

Properties of soft X-ray emission from a fast capillary discharge

Results are presented from experimental studies of the time resolved, spatially resolved, and spectrally resolved soft X rays emitted along the axis of a fast capillary discharge.     

Diagnostics of soft X-ray emission from the plasma of a fast capillary discharge

Results are presented from time-resolved measurements of the soft X-ray emission in the 10-to 40-eV spectral range from the plasma of a pulsed capillary discharge in argon at current pulse amplitudes of up to 26 kA and a current rise time of ～10¹² A/s. The experiments were carried out with 0.3-cm-diameter 15.7-cm-long ceramic capillaries filled with argon at a pressure of 0.25–0.5 Torr in the SIGNAL electrophysical facility. The experimental data are interpreted via computer simulations of the magnetohydrodynamics and level-by-level ion kinetics of an argon plasma. The results obtained indicate that soft X-ray laser pulses with a photon energy of 26.4 eV and duration of 1–2 ns are generated ≈33 ns after the beginning of the discharge current pulse.     

Experimental study of the processes accompanying argon breakdown in a long discharge tube at a reduced pressure

Results are presented from experimental studies of the breakdown stage of a low-pressure discharge (1 and 5 Torr) in a glass tube the length of which (75 cm) is much larger than its diameter (2.8 cm). Breakdowns occurred under the action of positive voltage pulses with an amplitude of up to 9.4 kV and a characteristic rise time of 2–50 μs. The discharge current in the steady-state mode was 10–120 mA. The electrode voltage, discharge current, and radiation from the discharge gap were detected simultaneously. The dynamic breakdown voltage was measured, the prebreakdown ionization wave was recorded, and its velocity was determined. The dependence of the discharge parameters on the time interval between voltage pulses (the socalled “memory effect”) was analyzed. The memory effect manifests itself in a decrease or an increase in the breakdown voltage and a substantial decrease in its statistical scatter. The time interval between pulses in this case can reach 0.5 s. The effect of illumination of the discharge tube with a light source on the breakdown was studied. It is found that the irradiation of the anode region of the tube by radiation with wavelengths of ≤500 nm substantially reduces the dynamic breakdown voltage. Qualitative explanations of the obtained results are offered.     

Effect of the direction of a preionization current on X-ray emission from a capillary discharge plasma

The effect of the direction of a preionization current on the generation of 469-Å X-ray emission from the plasma of a fast capillary discharge in argon was studied experimentally in the SIGNAL facility (the discharge current I = 25–40 kA and the current rise rate dI/dt ～ 10¹² A/s). The experiments were performed with 3.1-mm-diameter 157-mm-long ceramic capillaries filled with argon at a pressure of 0.2–1.0 Torr.     

Experimental and theoretical studies of the optical and electrical characteristics of a high-pressure pulsed discharge in argon

The optical and electrical characteristics of pulsed discharges in pure Ar at pressures of up to 7 atm, at which the discharge becomes unstable, are studied in a simple experimental device with automatic preionization. The gas temperature in the discharge is estimated from the width of the recorded emission spectrum. An analytical model of the vibrational relaxation of Ar ^*₂ (v) is used to better determine the constants of the vibrational-translational relaxation of Ar ^*₂ (v) molecules in their collisions with Ar atoms. The zerodimensional numerical model of a pulsed discharge in Ar is modified. The experimental and calculated results are compared in detail. Good agreement is achieved between the measured and calculated time dependences of the electrode voltage and the intensity of spontaneous emission in the pressure range of 1–6 atm, as well as between the measured and calculated values of the gas temperature at pressures of 3–6 atm. Preliminary results from numerical studies of the possibility of achieving generation are discussed.

     

Experimental investigation of the shock wave in a fast discharge with cylindrical geometry

The work is devoted to the registration and the study of the properties of cylindrical shock waves generated in the fast discharge (dI/dt ～ 10¹² A/s) inside the ceramic tube (Al₂O₃) filled by argon at pressures of 100 and 300 Pa. The shock wave appears at the inner wall of the insulator and moves to the discharge axis with a velocity of about (3?4) × 10⁶ cm/s with subsequent cumulation. The plasma behind the front is heated enough to produce radiation in the vacuum ultraviolet (VUV) region, which makes it possible to study its structure by means of a pinhole camera with a microchannel plate detector. The time resolution of the registration system was 10 ns. The analysis of VUV spectra of the plasma shows that the electron temperature behind the shock wave front is about several eV; after the moment of cumulation, its temperature increases to 20–30 eV.     

Characteristics of a DC discharge with a water cathode in argon

The characteristics of a dc discharge excited between a metal anode and a water cathode in argon were studied experimentally. The dimensions of the positive column and the electric field in it were measured, and the vibrational temperature in the positive column was determined from the N₂ C ³Π_u → B ³Π_g (0–2) emission band. It is shown that the power deposited in the positive column is almost entirely spent on gas heating. The obtained dependence of the reduced electric field on the gas pressure and the ionization frequencies calculated by solving the Boltzmann equation indicate that electrons are lost diffusively, whereas ionization proceeds in a stepwise manner via the lower metastable states of argon atoms.     

Experimental study of a negative corona in atmospheric-pressure argon

Results are presented from experimental studies of a negative point-to-plane dc corona in atmospheric-pressure argon. Several operating modes are identified: a hysteresis region, a repetitive mode, and a glow-discharge mode. The effect of gas-dynamic parameters on the characteristics of a repetitive negative corona is investigated.     

Pulsed microwave discharge in a capillary filled with atmospheric-pressure gas

A pulsed microwave coaxial capillary plasma source generating a thin plasma filament along the capillary axis in an atmospheric-pressure argon flow is described. The dynamics of filament formation is studied, and the parameters of the gas and plasma in the contraction region are determined. A physical model of discharge formation and propagation is proposed. The model is based on the assumption that, under the conditions in which the electric fields is substantially below the threshold value, the discharge operates in a specific form known as a self-sustained-non-self-sustained (SNS) microwave discharge.     

Evolution of a capillary discharge induced by a semiconductor current generator

Results are presented from the intermediate stage of work on creating a current generator in a circuit with an inductive energy storage and a semiconductor opening switch made of 40 SDL-800 diodes. A six-diode generator prototype has been created with a current pulse amplitude of ～4.5 kA and a leading edge duration of ～10–20 ns at an inductive load of 30–35 nH. The generator was used to study discharges in capillaries filled with argon or hydrogen. It is shown that, in a 2-mm-diameter capillary, the initial azimuthal asymmetry of a structure arising during the breakdown ceases as the discharge evolves, whereas in a 0.8-mm-diameter capillary, it is retained. Time-resolved spectroscopic studies of the plasma reveal the presence of line emission of highly ionized argon (ArVII and ArVIII) in the hottest phase of the discharge, which indicates that a temperature of 20–40 eV has been achieved.     

Nonuniformity of the chemical composition of a capillary discharge plasma

A steady-state distribution of the concentration of two ion species in a capillary discharge plasma is studied using MHD equations for a plasma with a spatially nonuniform, time-dependent chemical composition. In our case, the set of equations is significantly simplified because of the steady-state character and symmetry of the problem. Even with such simplification, however, some results could be obtained only by numerical integration. The factors affecting the distribution of heavy ions are studied. It is shown that the distribution of the heavy impurity over the discharge cross section can be much more nonuniform than the distribution of the main component (hydrogen). A simple criterion for such a nonuniformity is obtained.     

X-ray spatial distribution of a low-inductance vacuum spark discharge

The paper presents the results of X-ray source spatial distribution measurements of a low-inductance vacuum spark discharge based on the analysis of helium-like ions spectral lines structure. The intensities of spectral lines of FeXXV ions and dielectronic satellites with spatial resolution were measured. The polarization of satellite line 1s2p ^{2 2} D _5/2-1s ²2p ² P _3/2 was found. The obtained dependence of maximum plasma parameters during micropinch events from initial plasma line density in discharge corresponds to the radiative collapse model.     

Experimental study of a multipoint cathode corona in an argon flow

Results are presented from experimental studies of a multipoint negative corona in an atmospheric-pressure argon flow. It is shown that a decrease in the interpoint distance, gas circulation through the discharge gap, and the adjustment of ballast resistances in the corona supply circuit allow one to stabilize the discharge and enlarge the operating range of discharge currents.     

Experimental and theoretical study of a quasi-steady electron-beam plasma in hot argon

An argon plasma produced by a quasi-steady high-energy electron beam was studied experimentally. The plasma density was measured using an open barrel-shaped microwave cavity. The gas temperature was shown to be a few times higher than room temperature. Electron beam propagation, as well as heat-transfer and kinetic processes in plasma, is modeled self-consistently for the actual experimental conditions. It is shown that the plasma density is largely governed by the conversion rate of the atomic ions into molecular ones. The calculated results are compared to the experimental data.     

Control for the parameters of a low-pressure glow discharge in argon by means of acoustic flows

The possibility to control the parameters of a low-pressure glow discharge in argon by means acoustic flows is demonstrated by numerical simulations. It is shown that such flows result in an increase in the densities of charged and excited particles in the axial region of the discharge and contraction of the positive column, while stability of the discharge is preserved.     

Controlling the characteristics of a repetitive volume discharge in CFC-12 and its mixtures with argon

The parameters of a repetitive volume discharge in CF₂Cl₂ (CFC-12) and its mixtures with argon at pressures of P(CF₂Cl₂)≤0.4 kPa and P(Ar)≤1.2 kPa are studied. The discharge was ignited in an electrode system consisting of a spherical anode and a plane cathode by applying a dc voltage U_ch≤1 kV to the anode. The electrical and optical characteristics of a volume discharge (such as the current-voltage characteristics; the plasma emission spectra; and the waveforms of the discharge voltage, the discharge current, and the total intensity of plasma emission) are investigated. It is found that, by shunting the discharge gap with a pulsed capacitor with a capacitance of C₀≤3.5 nF, it is possible to control the amplitude and duration of the discharge current pulses, as well as the characteristics of the pulsed plasma emission. The increase in the capacitance C₀ from 20 to 3500 pF leads to a significant increase in the amplitude and duration of the discharge current pulses, whereas the pulse repetition rate decreases from 70 to 3 kHz. The glow discharge exists in the form of a domain with a height of up to 3 cm and diameter of 0.5–3.0 cm. The results obtained can be used to design an untriggered repetitive germicidal lamp emitting in the Cl₂(257/200 nm) and ArCl (175 nm) molecular bands and to develop plasmachemical methods for depositing amorphous fluorocarbon and chlorocarbon films.     

Coagulation of dust grains in the plasma of an RF discharge in argon

Results are presented from experimental studies of coagulation of dust grains of different sizes injected into a low-temperature plasma of an RF discharge in argon. A theoretical model describing the formation of dust clusters in a low-temperature plasma is developed and applied to interpret the results of experiments on the coagulation of dust grains having large negative charges. The grain size at which coagulation under the given plasma conditions is possible is estimated using the developed theory. The theoretical results are compared with the experimental data.