Synthesis of stable C‐linked ferrocenyl amino acids and their use in solution‐phase peptide synthesis

Incorporation of ferrocenyl group to peptides is an efficient method to alter their hydrophobicity. Ferrocenyl group can also act as an electrochemical probe when incorporated onto functional peptides. Most often, ferrocene is incorporated onto peptides post‐synthesis via amide, ester or triazole linkages. Stable amino acids containing ferrocene as a C‐linked side chain are potentially useful building units for the synthesis of ferrocene‐containing peptides. We report here an efficient route to synthesize ferrocene‐containing amino acids that are stable and can be used in peptide synthesis. Coupling of 2‐ferrocenyl‐1,3‐dithiane and iodides derived from aspartic acid or glutamic acid using n‐butyllithium leads to the incorporation of a ferrocenyl unit to the δ‐position or ε‐position of an α‐amino acid. The reduction or hydrolysis of the dithiane group yields an alkyl or an oxo derivative. The usability of the synthesized amino acids is demonstrated by incorporating one of the amino acids in both C‐terminus and N‐terminus of tripeptides in solution phase. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Papain-catalysed synthesis of dipeptides: a novel approach using free amino acids as nucleophiles.

For the first time, papain-catalysed synthesis of peptide bonds was successfully carried out using free amino acids as nucleophiles. In kinetically controlled experiments employing pH-Stat-mode, the ester substrates Z-Ala-OMe and Z-Gly-OMe were coupled with alanine, glutamine, and Cys(Acm)-OH, respectively. Under optimized reaction conditions (pH 9.2, high ratio nucleophile/carboxyl component, 10 mumol substrate mg-1 papain), the peptide yields ranged from 17% to 79%, depending on the structure of the amino and/or carboxyl component. The peptides formed were not hydrolysed under the chosen reaction conditions. With Z-Gly-OMe as the ester substrate, formation of the dipeptide was both rapid and high yielding. Papain-catalysed formation of peptide bonds applying free amino acids as nucleophiles might serve as an economic and easily manageable approach for the synthesis of short-chain peptides to be used in clinical nutrition.     

Developments in peptide and amide synthesis

The solid-phase methodology is key for an effective synthesis of peptides, from a milligram scale for research to a multi-kilo scale for drug production. Indeed, small peptides containing up to 20-30 amino acids are most readily synthesized by a solid-phase strategy. Larger peptides (up to 60 amino acids) should be synthesized by a convergent approach (i.e. synthesis of protected constituent peptides in solid-phase and combination of these units in solution). Larger peptides and proteins are prepared by chemical ligation, where unprotected segments have been prepared in solid-phase.     

Multiple peptide synthesis

The synthesis of large numbers of peptides can be very labor intensive and, if a conventional peptide synthesizer is used, only small numbers of peptides can be produced within a reasonable time. The techniques described below can make large numbers of different peptides simultaneously with varying degrees of mechanization, ranging from the wholly manual methods, to those involving complete mechanization of the whole synthesis process. Most of the multiple synthesis methods are primarily intended for small scale production ranging from microgram amounts up to a few tens of milligrams. All of the systems are economical in use of solvents and reagents, enabling cost-effective synthesis. The techniques described can also be used to prepare peptide libraries, containing several millions of peptide sequences, to enable the rapid screening of all possible permutations of amino acids within short peptides. However, it is considered that multiple synthesis methods are not particularly suited where extreme high purity or very long peptides are required.     

Solid-phase synthesis of chemotactic peptides using alpha-azido acids.

Four chemotactic peptides, For-Met-Xxx-Phe-OMe, with an alpha,alpha-disubstituted amino acid at position 2 have been synthesized by the azido acid method [Meldal M, Juliano MA, Jansson AM. 1997. Azido acids in a novel method of solid-phase peptide synthesis. Tetrahedron Lett. 38: 2531-2534] on solid-phase, and were tested for biological activity. Dipropylglycine in the central position (Xxx) was found to be as active as the natural chemotactic peptide for chemotactic activity toward human neutrophils. Higher yields were obtained than previously reported solution-phase syntheses of chemotactic peptides, and EEDQ was used successfully for the difficult solid-phase formylation of amino groups.     

Protease-catalysed peptide synthesis in solvent-free system

Summary A new method of enzymatic peptide synthesis without any liquid added has been proposed. The method is based on the admixing of N-acylamino acid (peptide) esters and nucleophiles (amides or tert.-butylesters of amino acids or peptides, peptides) with various proteolytic enzymes such as α-chymotrypsin, trypsin, proteinase K, subtilisin, elastase and papain in the presence of Na₂CO₃. 10H₂O. In most instances, acylating components were completely converted within a few hours giving satisfactory yields of desired peptide products.     

Individually addressable parallel peptide synthesis on microchips

Miniaturized, spatially addressable microchips of peptides and peptidomimetics are powerful tools for high-throughput biomedical and pharmaceutical research and the advancement of proteomics. Here we report an efficient and flexible method for the parallel synthesis of peptides on individually addressable microchips, using digital photolithography and photogenerated acid in the deprotection step. We demonstrate that we are able to synthesize thousands of peptides in a 1 cm(2) area on a microchip using 20 natural amino acids as well as synthetic amino acid analogs, with high stepwise yields and short reaction-cycle times. Epitope screening experiments using a p53 antibody (PAb240) produced clearly defined binding patterns. The peptidomimetic sequences on the microchip show specific antibody binding and provide insights into the molecular details responsible for specificity of epitope binding. Our approach requires just a conventional synthesizer and a computer-controllable optical module, thereby allowing potential development of peptide microchips for various pharmaceutical and proteomic applications in routine research laboratories.     

Translational pauses during a spider fibroin synthesis

The large ampullate glands of Nephila clavipes synthesize a tissue-specific fibroin for the web and dragline. Its secretory product migrates as one homogeneous band of approximately 320,000 daltons in denaturing electrophoresis. Similar analyses of the secretory epithelium reveal, in addition to the final product, a step ladder array of peptides in a highly reproducible and consistent pattern. We have correlated these peptide ladders with the process of fibroin synthesis. First, the peptides are very prominent in stimulated glands and quite dim in non stimulated ones. Secondly, by offering the cultured glands different amino acids in the incubating medium, we have linked the presence of the bands with those amino acids which abound in the fibroin. The evidence correlates the peptides with active fibroin synthesis, thus they are products of translation, and possibly reflect discontinuities in the translational process such as those demonstrated during the synthesis of Bombyx fibroin.     

A peptidyl transferase ribozyme capable of combinatorial peptide synthesis

The formation of peptide bonds is a key step in both the chemical and biological synthesis of peptides. The ribozyme can use a wide range of amino acids as its substrate for the dipeptide synthesis. A library containing 29 peptides whose synthesis was catalyzed by this unique ribozyme was analyzed by mass spectrometry. These results implicate that ribozyme may have potential application in the peptide synthesis.     

Enzymatic synthesis of dipeptide units of the D-D-configuration in aqueous media

The enzymatic synthesis of dipeptide units of the D-D-configuration in aqueous media, catalysed by muramoyl-pentapeptide carboxypeptidase (E.C.3.4.17.8), is described. Ac-L-Lys(Ac)-D-Ala-D-Lac-OH and Ac-D-Ala-OMe were used as acyl-components. Neutral, basic, and hydrophobic amino acids acting as nucleophiles were incorporated. The enzyme is stereospecific in that only the D-enantiomers of amino acids or amino acid derivatives were incorporated. As nucleophiles, the unmodified amino acids resulted in higher product yields compared with using the corresponding amino acid derivatives. Product yields ranged from 40 to 87%.     

Dipeptide synthesis by an aminopeptidase from Streptomyces septatus TH-2 and its application to synthesis of biologically active peptides

Dipeptide synthesis by aminopeptidase from Streptomyces septatus TH-2 (SSAP) was demonstrated using free amino acid as an acyl donor and aminoacyl methyl ester as an acyl acceptor in 98% methanol (MeOH). SSAP retained its activity after more than 100 h in 98% MeOH, and in the case of phenylalanyl-phenylalanine methyl ester synthesis, the enzyme reaction reached equilibrium when more than 50% of the free phenylalanine was converted to the product. In an investigation of the specificity of SSAP toward acyl donors and acyl acceptors, SSAP showed a broad specificity toward various free amino acids and aminoacyl methyl esters. Furthermore, we applied SSAP to the synthesis of several biologically active peptides, such as aspartyl-phenylalanine, alanyl-tyrosine, and valyl-tyrosine methyl esters.     

High yielding synthesis of N-ethyl dehydroamino acids

Recently we reported the use of a sequence of alkylation and dehydration methodologies to obtain N-ethyl-α, β-dehydroamino acid derivatives. The application of this N-alkylation procedure to several methyl esters of β,β-dibromo and β-bromo, β-substituted dehydroamino acids protected with standard amine protecting groups was subsequently reported. The corresponding N-ethyl, β-bromo dehydroamino acid derivatives were obtained in fair to high yields and some were used as substrates in Suzuki cross-coupling reactions to give N-ethyl, β,β-disubstituted dehydroalanine derivatives. Herein, we further explore N-ethylation of β-halo dehydroamino acid derivatives using triethyloxonium tetrafluoroborate as alkylating agent, but substituting N,N-diisopropylethylamine for potassium tert-butoxide as auxiliary base. In these conditions, for all β-halo dehydroamino acid derivatives, reactions were complete and the N-ethylated derivative could be isolated in high yield. This method was also applied for N-ethylation of non-halogenated dehydroamino acids. Again, with all compounds the reactions were complete and the N-ethyl dehydroamino acid derivatives could be isolated in high yields. Some of these N-ethyl dehydroamino acid methyl ester derivatives were converted in high yields to their corresponding acids and coupled to an amino acid methyl ester to give N-ethyl dehydrodipeptide derivatives in good yields. Thus, this method constitutes a general procedure for high yielding synthesis of N-ethylated dehydroamino acids, which can be further applied in peptide synthesis.     

Trypsin as a catalyst for peptide synthesis

Trypsin-catalyzed syntheses of peptides were performed using various N-acylated amino acid or peptide esters as donors and amino acid derivatives, peptides, or their derivatives as acceptors. The synthesis was almost quantitative under optimal conditions. Considerably more enzyme and a more alkaline pH were necessary for synthesis than hydrolysis. Another very important condition was the concentration of the starting materials; higher concentrations resulted in much better product yields. The nucleophile specificity for synthesis was also important; hydrophobic or bulky amino acid residues were most efficient at the P1' position, and L-proline as well as D-amino acid residues were the worst choices. The synthesis was also dependent on the solubility of the products synthesized; the yield was higher with products of lower solubility. As donor esters, good substrates were all useful. Accordingly, fragment condensation was possible using N-acylated peptide esters and various peptides. The present study suggests that trypsin may become a useful tool for peptide synthesis.     

Suppression of epimerization by cupric (II) salts in peptide synthesis using free amino acids as amino components.

An epimerization-free system for coupling N-protected peptides with free amino acids was developed. A number of inorganic substances were tested as epimerization suppressant additives during the coupling by various methods (carbodiimide plus additives, uronium salts, Woodward's reagent-K, isobutyl-chloroformate, etc.). Some of them (ZnCl2, RbClO4, LiCl, SnCl4, AlCl3, etc.) in combination with some coupling methods can guarantee coupling with minimal epimerization (D-epimer < 1%). But only a simultaneous use of 1-hydroxybenzotriazole and Cu2+ ions as additives in carbodiimide-mediated peptide couplings appeared to give a standard result (D-epimer < 0.1%). There was no epimerization even in the case when N-methyl amino acid (sarcosine) was used as an amino component, while in the absence of Cu2+ ions an unacceptable level of epimerization was observed (D-epimer, 22% for carbodiimide with the 1-hydroxybenzotriazole method). So far it has been considered that Cu2+ ions prevent obtaining peptides in high yields (< 90%) by various coupling methods. We have found that the use of 1-hydroxybenzotriazole, CuCl2 and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide instead of dicyclohexylcarbodiimide provides a possible method for obtaining the desired peptides in 90-99% yields without epimerization. All these results were shown by employing several model peptide couplings with free amino acids as amino components dissolved in an effective solvent system which readily dissolved them.     

Use of the excluded protecting group (EPG) method for peptide synthesis.

The excluded protecting group (EPG) method has been used for the solution synthesis of several peptides including Merrifield's Model Tetrapeptide, linear antamanide and an analogue of magainin-1, [Ala(19), Asn(22)]magainin-1. In the approach reported, the C-terminal amino acid is esterified to the 2-position of cholestane as the [2s,3s]iodohydrin ester and the penultimate amino acid added to the aminoacyl-steroid as the Fmoc-pentafluorophenyl-ester. The Fmoc group is removed with Et(2)NH/DMF ( approximately 15% v/v) and, after evaporation to approximately 10 mL, the solution chromatographed on Sephadex LH-20 in DMF. The dipeptidyl-steroid elutes as the free amine well separated from other reaction mixture components. Fractions containing the dipeptide, as determined by counting and TLC, are pooled and reacted with the next Fmoc-amino acid-pentafluorophenyl ester in the sequence. Repetition of the deprotection/purification/reaction cycle yields the fully protected peptide.On completion of the synthesis, the cholestane iodohydrin ester is selectively removed by treatment with Zn degrees /AcOH to yield the peptide with intact alpha-amino and side chain protecting groups. Global deprotection is achieved with HF. All intermediates from the syntheses reported were characterized. The magainin analogue was shown to have full biologic activity. The Fmoc iodohydrin esters of 16 of the 20 proteogenic amino acids have been prepared and characterized for use as the C-terminal amino acids in other EPG syntheses.     

Protein synthesis in polyamine-deficient bacteria during amino-acid starvation

Amino-acid starvation in polyamine-auxotrophic bacteria grown in the presence of putrescine provokes a marked inhibition of protein synthesis. This inhibition is almost completely relieved in polyamine-depleted cells. The differential behaviour of bacterial protein synthesis depending on the endogenous levels of polyamines is not due to a change in the uptake of amino acids used to measure protein synthesis, nor to the decreased growth rate of polyamine-depleted cells. During leucine starvation, cells grown with putrescine synthesized a somewhat lower amount of high-molecular-weight proteins than polyamine-depleted bacteria. In addition, cells with normal endogenous levels of polyamines accumulated significant amounts of 62 and 41 kDa polypeptides as well as several low-molecular-weight peptides.     

The origin of polynucleotide-directed protein synthesis

Summary If protein synthesis evolved in an RNA world it was probably preceded by simpler processes by means of which interaction with amino acids conferred selective advantage on replicating RNA molecules. It is suggested that, at first, the simple attachment of amino acids to the 2′(3′)-termini of RNA templates favored initiation of replication at the end of the template rather than at internal positions. The second stage in the evolution of protein synthesis would probably have been the association of pairs of charged RNA adaptors in such a way as to favor noncoded formation of peptides. Only after this process had become efficient could coded synthesis have begun.     

Light directed massively parallel on-chip synthesis of peptide arrays with t-Boc chemistry

Peptide and peptidomimetic molecule arrays are emerging powerful tools for parallel screening of binding in proteomics and pharmaceutical discovery research. Up to now the common method of preparing peptide arrays was based on spotting on glass using a library of presynthesized peptides. However, due to the large number of monomers (amino acids) it is not possible to have combinatorial libraries which include all combinations of natural and synthetic amino acids. We describe a very flexible on-chip oligopeptide synthesis method which uses the well developed t-Boc based solid state synthesis chemistry. A very high degree of flexibility is achieved by using light photo generated acids and maskless projection lithography for spatially directed deprotection. Use of microfluidic chips enables moderately high densities, short reaction times and off-the-shelf chemicals. Examples are given from synthesis of metal ion binding peptides and epitope binding assays.     

The spark discharge synthesis of amino acids from various hydrocarbons

The spark discharge synthesis of amino acids using an atmosphere of CH₄ + N₂ + H₂O + NH₃ has been investigated with variable pNH₃. The amino acids produced using higher hydrocarbons (ethane, ethylene, acetylene, propane, butane, and isobutane) instead of CH₄ were also investigated. There was considerable range in the absolute yields of amino acids, but the yields relative to glycine (or -amino-n-butyric acid) were more uniform. The relative yields of the C₃ to C₆ aliphatic -amino acids are nearly the same (with a few exceptions) with all the hydrocarbons. The glycine yields are more variable. The precursors to the C₃-C₆ aliphatic amino acids seem to be produced in the same process, which is separate from the synthesis of glycine precursors. It may be possible to use these relative yields as a signature for a spark discharge synthesis provided corrections can be made for subsequent decomposition events (e.g. in the Murchison meteorite).     

2-Chloro-1-methylpyridinium iodide. A suitable reagent for peptide synthesis

2-Chloro-1-methylpyridinium iodide is a coupling reagent for peptide synthesis. By its use different peptides were synthesized with protected di- and trifunctional amino acids. While urethan-protected amino acids react free of racemization, the fragment condensation needs N-Hydroxysuccinimide, as shown by the Young test.