Construction and characterization of new cloning vehicles. III. Derivatives of plasmid pBR322 carrying unique Eco RI sites for selection of Eco RI generated recombinant DNA molecules.

In vitro recombinant DNA techniques were used to construct two new cloning vehicles, pBR324 and pBR235. These vectors, derived from plasmid pBR322, are relaxed replicating elements. Plasmid pBR324 carries the genes from pBR322 coding for resistance to the antibiotics ampicillin (Apr) and tetracycline (Tcr) and the colicin E1 structural and immunity genes derived from plasmid pMBI. Plasmid pBR325 carries the Apr and Tcr genes from pBR322 and the cloramphenicol resistance gene (Cmr) from phage P1Cm. In these plasmids the unique EcoRI restriction site present in the DNA molecule is located either in the colicin E1 structural gene (pBR324) or in the Cmr gene (pBR325). These vectors were constructed in order to have a single EcoRI site located in the middle of a structural gene which when inactivated would allow, for the easy selection of plasmid recombinant DNA molecules. These plasmids permit the molecular cloning and easy selection of EcoRI, BamHI, HindIII, PstI, HincII, SalI, (XamI), Smal, (XmaI), BglII and DpnII restriction generated DNA molecules.     

An inverted repeat sequence of the IncFI plasmid ColV2-K94 increases multimerization-mediated plasmid instability

A detailed physical map of the region of the IncFI plasmid ColV2-K94 containing the Rep1 replicon, a Tn903 transposon, and an inverted repeat structure (X1) with unknown properties was prepared by cloning restriction fragments into pBR325. Inserts carrying the 1.2 kb repeated sequence of X1, but not the IS903 sequence of Tn903, had a destabilizing effect on pBR325 and pBR322 plasmid maintenance. One of these derivatives, pWS139, was studied further and was shown to have elevated levels of multimeric DNA forms; this resulted in decreased copy number and plasmid instability, as multimerization reduces the effective number of randomly segregating plasmids per cell. A ColV2-K94 miniplasmid, which has a copy number much lower than that of ColE1-derived vectors, was also less stably inherited if it contained the X1 structure. This destabilizing effect of the X1 repeat sequence was dependent on the RecA function, but not the RecB or the RecC functions of the host. These results suggest that the inverted repeat sequence of the X1 structure serves as a 'hot-spot' for generalized recombination. Thus, when present in cis, this sequence can generate plasmid instability because plasmid molecules are readily converted into multimeric forms through enhanced recombination at this site.     

Construction and characterization of new cloning vehicles. VI. Plasmid pBR329, a new derivative of pBR328 lacking the 482-base-pair inverted duplication

The 4150-bp plasmid pBR329 was constructed by the the insertion into pBR327 of an 877-bp DNA fragment carrying the Cmr gene from pBR328. This new cloning vector does not contain the 482-bp inverted duplication that has been reported to be present in pBR325 and pBR328 (Prentki et al., 1981). In pBR329 the Cmr gene lacks its original promoter but is transcribed counterclockwise toward the Apr gene by a promoter located to the right of the HindIII site in the Tcr gene.     

Direct repeats flanking the Bacteroides transposon Tn4351 are insertion sequence elements.

The clindamycin-erythromycin resistance (Ccr Emr) region of the Bacteroides transposon Tn4351 is flanked by direct repeats. This study showed that the direct repeats are insertion sequence (IS) elements. Although both IS elements can mediate transfer of the chloramphenicol (Cmr) marker on pBR328 by cointegrate formation with the conjugal IncW plasmid R388, IS4351R-mediated transfer of Cmr occurred at a consistently lower frequency than did the transfer mediated by IS4351L. Analysis of plasmids from the resultant transconjugants revealed IS-mediated activities such as deletions, tandem duplication of IS4351L, and excision of IS4351R.     

Structural instability of co-integrates formed during interaction of plasmid R57 with pB322 and RP1. Possible role of IS1 element in the degradation of co-integrates

The conjugative plasmid R57 determines resistance to ampicillin and chloramphenicol. Earlier it was shown that R57 encodes site-specific recA-independent recombinase, which acts in cis and resolves IS1-mediated cointegrates arising in the Escherichia coli recA cells between R57 and pBR322. In the present work the properties of the cointegrates between R57 and pBR322 or RP1 arising in the E. coli rec+ strains were studied. It was found that the cointegrates between R57 and pBR322, obtained by mating of the respective biplasmid donors of E. coli rec+ and the rec+ recipients, lost as a result of deletion a large DNA segment of R57 containing determinant Cmr. The resulting hybrid replicons preserved determinants Apr and Tcr of pBR322 and the R57 conjugative properties and were structurally identical. By using plasmid RP1ts12, which is temperature-sensitive in replication, it was demonstrated that in cells rec+ the cointegrates between R57 and RP1 are extremely unstable. On storage they undergo structural degradation mainly affecting the RP1 replicon. The degradation products of the hydrid complex had lost their RP1 genes but preserved the R57 functional determinants. For elucidation of the observed phenomena the properties of the IS1-mediated cointegrates between pBR322:Tn9 and plasmid pBR3.1--deletion derivative of RP1 were studied. It was found that insertion of IS1 sometimes resulted in formation of unstable cointegrates capable of resolving and loosing determinant Cmr with a high frequency. It was suggested that IS1 encodes the site-specific recombinase responsible for resolution of the IS1-mediated cointegrates and deletion generation. Expression of this recombinase appears to be dependent on structure of the insertion sites. The possible role of IS1 and recombinase encoded by it in resolution and structural instability of the cointegrates between R57 and pBR322 or RP1 is discussed.     

Construction and characterization of new cloning vehicles. IV. Deletion derivatives of pBR322 and pBR325

In vitro recombinant DNA experiments involving restriction endonuclease fragments derived from the plasmids pBR322 and pBR325 resulted in the construction of two new cloning vehicles. One of these plasmids, designated pBR327, was obtained after an EcoRII partial digestion of pBR322. The plasmid pBR327 confers resistance to tetracycline and ampicillin, contains 3273 base pairs (bp) and therefore is 1089 bp smaller than pBR322. The other newly constructed vector, which has been designated pBR328, confers resistance to chloramphenicol as well as the two former antibiotics. This plasmid contains unique HindIII, BamHI and SalI sites in the tetracycline resistance gene, unique PvuI and PstI sites in the ampicillin resistance gene and unique EcoRI, PvuII and BalI sites in the chloramphenicol resistance gene. The pBR328 plasmid contains approx. 4900 bp.     

The site-specific deletion in plasmid pBR322

The formation of a deletion derivative of plasmid pBR322, designated pBR322 delta 1, was observed during cloning of various eukaryotic DNAs, when the BamHI site of the plasmid vector was used for construction of the recombinant molecules. The restriction analysis of six independently isolated pBR322 delta 1 plasmids allowed establishment of their complete identity. Similar deletion derivatives were also formed as a result of transformation of Escherichia coli cells by the linear form of vector pBR322 produced by BamHI cleavage, but not by SalI or HindIII. The endpoints of the deletion in one of the pBR322 delta 1 plasmids occurred at positions 375 and 16666 bp from the EcoRI site, as determined by sequence analysis. Formation of pBR322 delta 1 is most probably due to site-specific recombination between the sequence in the 1666-1670 bp region and the BamHI end of the linear pBR322 molecule. THe deletion was not controlled by the recA system of the host bacteria.     

Identification of sequences necessary for packaging DNA into lambda phage heads

Several species of DNA molecules are packaged into lambda phage heads if they carry the region around the cohesive end site of lambda phage (cos lambda). The minimal functional sequence around cos lambda needed for packaging was examined by cloning in pBR322. The results showed that the minimal region contained 85 bp around cos lambda; 45 bp of the left arm of lambda phage and 40 bp of the right arm. A 75-bp region located to the right of the minimal region seems to enhance packaging. A 223-bp fragment containing these regions can be used as a portable element for plasmid DNA packaging into lambda phage heads. Plasmid ppBest 322, a derivative of pBR322 carrying this portable packager and both amp and tet genes, was constructed. This plasmid is useful for cloning of large DNA fragments.     

Characterization of insertion sequence IS946, an Iso-ISS1 element, isolated from the conjugative lactococcal plasmid pTR2030.

The self-transmissible plasmid pTR2030 mobilized nonconjugative heterologous cloning vectors pGK12 (Cmr Emr) and pSA3 (Emr) at frequencies of 10(-5) to 10(-6) per input donor. Transconjugants harbored a 51- or 58-kilobase (kb) plasmid not found in the parental strains that cotransferred at high frequency with Cmr Emr and pTR2030-encoded phage resistance (Hsp+) in second-round matings (10(-1) per input donor). Restriction endonuclease mapping and DNA-DNA hybridization identified the 51- to 58-kb plasmids as pTR2030::vector cointegrates. Examination of four cointegrates indicated that pGK12 and pSA3 had inserted within two locations on pTR2030. Resolution of the cointegrates generated vector derivatives containing a 0.8-kb insert of pTR2030 DNA. Restriction analyses of several resolution plasmids indicated that the 0.8-kb element had inserted into various positions within pGK12 and pSA3 and in certain cases had inactivated the Cmr or Emr marker of pGK12. A conjugative mobilization assay demonstrated that the 0.8-kb element, designated IS946, mediated transpositional recombination. Nucleotide sequence determination identified IS946 as an 808-base-pair (bp) insertion sequence sharing ca. 96% homology with lactococcal insertion sequence ISS1. IS946 differed by 27 and 31 bp from ISS1S and ISS1T, respectively, and in 2 of 226 amino acids in the deduced sequence of the putative transposase. IS946 has perfect 18-bp terminal inverted repeats, identical to ISS1, and similarly generated 8-bp direct repeats of the target site upon insertion.     

Function of the InsA gene in the IS1 element of the Tn9' transposon: influence of oligonucleotide inserts in the InsA gene on formation of simple insertions and plasmid cointegrates]

To elucidate the role of the insA reading frame in transposition of the IS1 element of the Tn9' transposon, the derivatives of plasmids pUC19::Tn9' and pUC19::IS1 have been obtained using oligonucleotide inserts of the length equal or exceeding 9 bp and equal to 10 bp. The ability of mutant variants of the Tn9' transposon and the IS1 element to form simple insertions and plasmid cointegrates was studied. To this end, experiments were performed on mobilization of the derivatives of pUC19 containing mutant variants of the IS1 element and Tn9' as well as of the plasmids pUC19::Tn9' by the conjugative plasmid pRP3.1. According to the data obtained, mutations (inserts) in the insA gene have no influence on the frequency of transposition of the IS1 element and Tn9' from the plasmid pUC19 to pRP3.1. At the same time, the frequency of transposition events of mutant variants of Tn9' from the plasmid pRP3.1 to pBR322 is more than 10 times lower in comparison with the wild type transposon. The data obtained are in accordance with the assumption that the insA gene is not essential for transposition. A hypothesis is put forward explaining the role of the insA gene product in the process of bringing together short inverted repeats of the IS1, which are the sites for the transposase to be recognized at first stages of transposition.     

An IS15 insertion generates an eight-base-pair duplication of the target DNA

In plasmid pIP1088 the transposable module IS15 is inserted at nucleotide position 1,430 of the vector plasmid pBR322. We have sequenced the termini of the IS15 element, which consists of two perfect inverted repeat sequences, 14 bp long. The sequence is 5′-GGCACTGTTGCAAA… TTTGCAACAGTGCC-3′. The integration event results in the duplication of 8 bp of target DNA.     

Highly efficient yeast-based in vivo DNA cloning of multiple DNA fragments and the simultaneous construction of yeast/ Escherichia coli shuttle vectors

In vivo recombinational cloning in yeast is a very efficient method. Until now, this method has been limited to experiments with yeast vectors because most animal, insect, and bacterial vectors lack yeast replication origins. We developed a new system to apply yeast-based in vivo cloning to vectors lacking yeast replication origins. Many cloning vectors are derived from the plasmid pBR322 and have a similar backbone that contains the ampicillin resistance gene and pBR322-derived replication origin for Escherichia coli. We constructed a helper plasmid pSUO that allows the in vivo conversion of a pBR322-derived vector to a yeast/E. coli shuttle vector through the use of this backbone sequence. The DNA fragment to be cloned is PCR-amplified with the addition of 40 bp of homology to a pBR322-derived vector. Cotransformation of linearized pSU0, the pBR322-derived vector, and a PCR-amplified DNA fragment, results in the conversion of the pBR322-derived vector into a yeast/E. coli shuttle vector carrying the DNA fragment of interest. Furthermore, this method is applicable to multifragment cloning, which is useful for the creation of fusion genes. Our method provides an alternative to traditional cloning methods.     

Identification of the Escherichia coli K-12 cpxA locus as a single gene: construction and analysis of biologically-active cpxA gene fusions

In the accompanying communication we showed that a 2 kb EcoRI-BamHI restriction fragment from the pfkA-rha interval of the Escherichia coli K-12 chromosome fully complemented a chromosomal cpxA mutation when the fragment was cloned in pBR325. The same fragment cloned in pBR322 lacked any complementing activity. We show here that minicells containing the pBR325 derivative (pRA310) synthesized a 33 kDa polypeptide, designated phi 33, that was not synthesized in minicells containing the pBR322 derivative (pRA311) or either of the parent plasmids. Synthesis of the phi 33 polypeptide did not occur in minicells containing Tn5 insertion alleles of pRA310 that inactivated its cpxA complementing activity. These insertions mapped within the vector cat (chloramphenicol acetyltransferase gene) sequence immediately adjacent to the EcoRI site of pRA310 and within the 700-800 bp of the cloned EcoRI-BamHI fragment immediately adjacent to the EcoRI site. Tn5 insertions located within the fragment but closer to the BamHI terminus affected neither the cpxA complementing activity of pRA310 nor synthesis of the phi 33 polypeptide in minicells. Plasmid pRA311 could be converted to a plasmid with cpxA complementing activity by cloning into its EcoRI site a restriction fragment containing a hybrid trp-lacUV5 promoter, the lacZ ribosome binding site, and the first eight lacZ codons.(ABSTRACT TRUNCATED AT 250 WORDS)