Establishment of gene transfer systems for and construction of the genetic map of a marine Vibrio strain.

Two gene transfer systems were established for a marine bacterium, Vibrio sp. strain 60. One was generalized transduction with a newly isolated bacteriophage, As3, and the other was conjugal gene transfer by the use of newly constructed transposon-facilitated recombination (Tfr) donors. As3 transduced various chromosomal markers at frequencies of 10(-4) to 10(-6). Tfr donors, which were constructed by introducing transposon Tn10 into both plasmid RP4 and the chromosome, mediated the polarized transfer of chromosomal genes from the sites of Tn10 insertion on the chromosome. By means of these gene transfer systems, a genetic map of the vibrio chromosome was constructed.     

Physical map of Mycoplasma gallisepticum.

Physical chromosomal maps of two Mycoplasma gallisepticum strains, R and ATCC 19610, were constructed by using field inversion gel electrophoresis. To assist in the ordering of chromosomal fragments and the construction of the chromosomal maps, the gram-positive transposon Tn4001 was modified to serve as a mobile restriction site. The total sizes of the M. gallisepticum R and ATCC 19610 genomes were estimated to be 1,037 and 998 kb, respectively. The restriction enzyme locations for EagI and SmaI were determined along with several transposon insertion sites. The two strain maps were similar except for three small deletions and one additional EagI site in strain ATCC 19610.     

Identifying microbial fitness determinants by insertion sequencing using genome-wide transposon mutant libraries

Insertion sequencing (INSeq) is a method for determining the insertion site and relative abundance of large numbers of transposon mutants in a mixed population of isogenic mutants of a sequenced microbial species. INSeq is based on a modified mariner transposon containing MmeI sites at its ends, allowing cleavage at chromosomal sites 16-17 bp from the inserted transposon. Genomic regions adjacent to the transposons are amplified by linear PCR with a biotinylated primer. Products are bound to magnetic beads, digested with MmeI and barcoded with sample-specific linkers appended to each restriction fragment. After limited PCR amplification, fragments are sequenced using a high-throughput instrument. The sequence of each read can be used to map the location of a transposon in the genome. Read count measures the relative abundance of that mutant in the population. Solid-phase library preparation makes this protocol rapid (18 h), easy to scale up, amenable to automation and useful for a variety of samples. A protocol for characterizing libraries of transposon mutant strains clonally arrayed in a multiwell format is provided.     

Molecular cloning of bacterial DNA in vivo using a transposable R6K ori and a P1vir phage.

A new method of cloning in vivo using the P1vir phage and transposon Tn5-rpsL oriR6K was developed. The method relies upon recircularization of transducing DNA containing a transposon insertion in a recombination-deficient strain of Escherichia coli K-12 and subsequent stable replication of the recircularized DNA. Using this method, we were able to clone in vivo the chromosomal region located between approximately 7.1 and 9.2 min on the E. coli K-12 map in a 95-kb plasmid.     

Genetic linkage maps of the red flour beetle, Tribolium castaneum, based on bacterial artificial chromosomes and expressed sequence tags

A genetic linkage map was constructed in a backcross family of the red flour beetle, Tribolium castaneum, based largely on sequences from bacterial artificial chromosome (BAC) ends and untranslated regions from random cDNA's. In most cases, dimorphisms were detected using heteroduplex or single-strand conformational polymorphism analysis after specific PCR amplification. The map incorporates a total of 424 markers, including 190 BACs and 165 cDNA's, as well as 69 genes, transposon insertion sites, sequence-tagged sites, microsatellites, and amplified fragment-length polymorphisms. Mapped loci are distributed along 571 cM, spanning all 10 linkage groups at an average marker separation of 1.3 cM. This genetic map provides a framework for positional cloning and a scaffold for integration of the emerging physical map and genome sequence assembly. The map and corresponding sequences can be accessed through BeetleBase (http://www.bioinformatics.ksu.edu/BeetleBase/).     

Analysis of the chromosomal distribution of transposon-carrying T-DNAs in tomato using the inverse polymerase chain reaction

We are developing a system for isolating tomato genes by transposon mutagenesis. In maize and tobacco, the transposon Activator (Ac) transposes preferentially to genetically linked sites. To identify transposons linked to various target genes, we have determined the RFLP map locations of Ac- and Dissociation (Ds)-carrying T-DNAs in a number of transformants. T-DNA flanking sequences were isolated using the inverse polymerase chain reaction (IPCR) and located on the RFLP map of tomato. The authenticity of IPCR reaction products was tested by several criteria including nested primer amplification, DNA sequence analysis and PCR amplification of the corresponding insertion target sequences. We report the RFLP map locations of 37 transposon-carrying T-DNAs. We also report the map locations of nine transposed Ds elements. T-DNAs were identified on all chromosomes except chromosome 6. Our data revealed no apparent chromosomal preference for T-DNA integration events. Lines carrying transposons at known map locations have been established which should prove a useful resource for isolating tomato genes by transposon mutagenesis.     

Construction of a chromosome map for the phage group II Staphylococcus aureus Ps55.

The genome size and a partial physical and genetic map have been defined for the phage group II Staphylococcus aureus Ps55. The genome size was estimated to be 2,771 kb by pulsed-field gel electrophoresis (PFGE) using the restriction enzymes SmaI, CspI, and SgrAI. The Ps55 chromosome map was constructed by transduction of auxotrophic and cryptic transposon insertions, with known genetic and physical locations in S. aureus NCTC 8325, into the Ps55 background. PFGE and DNA hybridization analysis were used to detect the location of the transposon in Ps55. Ps55 restriction fragments were then ordered on the basis of genetic conservation between the two strains. Cloned DNA probes containing the lactose operon (lac) and genes encoding staphylococcal protein A (spa), gamma hemolysin (hlg), and coagulase (coa) were also located on the map by PFGE and hybridization analysis. This methodology enabled a direct comparison of chromosomal organization between NCTC 8325 and Ps55 strains. The chromosome size, gene order, and some of the restriction sites are conserved between the two phage group strains.     

Mapping transposon insertion sites by touchdown PCR and hybrid degenerate primers

A novel mapping method based on touchdown PCR was developed for identifying a transposon insertion site in genomic DNA using a hybrid consensus-degenerate primer in combination with a specific primer that anneals to the transposon. The method was tested using Xanthomonas citri transposon mutants. PCR products contained adjacent DNA regions that belonged to both X. citri genomic DNA and the transposon. Products were directly sequenced from PCRs using only the specific primer. Different PCR conditions were tested, and the optimized reaction parameters that increased product yields and specificity are described. Best results were obtained with the HIB17 hybrid primer, which is a 25-mer oligonucleotide having degenerate bases at 6 different positions within the last 12 bases at the 3' end. An X. citri mutants library was produced by random transposition using the EZ::TN transposon, and we identified the insertion sites within the genome of 90 mutants. Insertions were found within both the chromosomal and the plasmid DNA in these X. citri mutants. Restriction mapping and Southern blot analysis confirmed the insertion sites for eight randomly chosen mutants. This method is a very useful tool for large-scale characterization of mutants in functional genomics studies.     

Construction and characterization of transposon TnphoZ for the identification of genes encoding exported proteins in Streptococcus agalactiae

Bacterial virulence often depends on exported proteins. To identify genes encoding exported proteins in the neonatal pathogen, group B streptococcus, the transposon TnphoZ was constructed. Here, the coding sequence for the secretion-dependent enzyme alkaline phosphatase from Enterococcus faecalis was fused to the left terminal repeat of Tn917, generating TnphoZ. A collection of TnphoZ mutants was isolated and the DNA flanking the transposon insertion sites was sequenced. Sequence data correlated the expression of high AP activity with transposon insertion into genes encoding predicted exported proteins. It is anticipated that TnphoZ will be suitable for use in other Gram-positive hosts.     

The construction and preliminary analysis of a Tn5 transposon based random mutant library of baculovirus

A transposon-based random mutation library of AcMNPV,the type species of baculovirus,was constructed using a Tn5 transposon.The green fluorescence protein gene under the control of the Drosophila hsp70 promoter was inserted into the transposon for easy tracking in insect cells.In vitro transposition was carried out using the transposon and AcMNPV genomic DNA to allow the random insertion of the transposon into the virus genome.The transposed genome was then used to transfect Sf21 insect cells,and a library of mutant viruses capable of expressing green fluorescence protein was obtained.Two mutant viruses,B9F and Li6A were isolated,and the sites of transposon insertion were determined to be within the coding regions of the 94k and p10 genes,respectively.Both genes were determined to be nonessential in viral replication and infection.This technique will be very useful in the functional study of baculovirus genes.     

Transposon-induced genetic rearrangements in the chromosome of Vibrio El Tor and their application to the construction of the first genetic map of a cholera vibrio

The specificity of integration of chloramphenicol resistance transposon (Tn9) into Vibrio El Tor chromosome was studied. As shown by the isolation of auxotrophs offerring various nitritional requirements, Tn9 displayed fairly low specificity in its interaction with the chromosome. When inserted into cholera vibrio chromosome, Tn9 induced secondary rearrangements of genetic material. Nutritional requirements were identified for the polyauxotrophic clones which resulted from the mutations in chromosome region adjacent to the insertion sites of Tn9 and Tn10. Based on these observations a preliminary map was constructed for certain regions of V. eltor chromosome.     

Efficient transposition in mycobacteria: construction of Mycobacterium smegmatis insertional mutant libraries.

The Tn611 transposon was inserted into pCG63, a temperature-sensitive plasmid isolated from an Escherichia coli-mycobacterial shuttle vector which contains the pAL5000 and pUC18 replicons. The resulting plasmid, pCG79, was used to generate a large number of insertional mutations in Mycobacterium smegmatis. These are the first mycobacterial insertional mutant libraries to be constructed by transposition directly into a mycobacterium. No highly preferential insertion sites were detected by Southern blot analysis of the chromosomal DNAs isolated from the insertion mutants. Auxotrophic mutants with various phenotypes were isolated at a frequency ranging from 0.1 to 0.4%, suggesting that the libraries are representative. The pCG79 system thus seems to be a useful tool for the study of M. smegmatis genetics and may be applicable to other mycobacteria, such as the M. tuberculosis complex.     

Identification and mapping of nitrogen fixation genes of Rhodobacter capsulatus: duplication of a nifA-nifB region.

Rhodobacter capsulatus mutants unable to fix nitrogen were isolated by random transposon Tn5 mutagenesis. The Tn5 insertion sites of 30 Nif- mutants were mapped within three unlinked chromosomal regions designated A, B, and C. The majority of Tn5 insertions (21 mutants) map within nif region A, characterized by two ClaI fragments of 2.5 and 25 kilobases (kb). The 17-kb ClaI fragment of nif region B contains six nif::Tn5 insertions, and the three remaining mutations are located on a 32-kb ClaI fragment of nif region C. Hybridization experiments using all 17 Klebsiella pneumoniae nif genes individually as probes revealed homology to nifE, nifS, nifA, and nifB in nif region A. The nifHDK genes were localized in nif region B. About 2 kb away from this operon, a second copy of the DNA fragments homologous to nifA and nifB, originally found in nif region A, was identified.     

Mu Transposon Insertion Sites and Meiotic Recombination Events Co-Localize with Epigenetic Marks for Open Chromatin across the Maize Genome

The Mu transposon system of maize is highly active, with each of the ∼50–100 copies transposing on average once each generation. The approximately one dozen distinct Mu transposons contain highly similar ∼215 bp terminal inverted repeats (TIRs) and generate 9-bp target site duplications (TSDs) upon insertion. Using a novel genome walking strategy that uses these conserved TIRs as primer binding sites, Mu insertion sites were amplified from Mu stocks and sequenced via 454 technology. 94% of ∼965,000 reads carried Mu TIRs, demonstrating the specificity of this strategy. Among these TIRs, 21 novel Mu TIRs were discovered, revealing additional complexity of the Mu transposon system. The distribution of >40,000 non-redundant Mu insertion sites was strikingly non-uniform, such that rates increased in proportion to distance from the centromere. An identified putative Mu transposase binding consensus site does not explain this non-uniformity. An integrated genetic map containing more than 10,000 genetic markers was constructed and aligned to the sequence of the maize reference genome. Recombination rates (cM/Mb) are also strikingly non-uniform, with rates increasing in proportion to distance from the centromere. Mu insertion site frequencies are strongly correlated with recombination rates. Gene density does not fully explain the chromosomal distribution of Mu insertion and recombination sites, because pronounced preferences for the distal portion of chromosome are still observed even after accounting for gene density. The similarity of the distributions of Mu insertions and meiotic recombination sites suggests that common features, such as chromatin structure, are involved in site selection for both Mu insertion and meiotic recombination. The finding that Mu insertions and meiotic recombination sites both concentrate in genomic regions marked with epigenetic marks of open chromatin provides support for the hypothesis that open chromatin enhances rates of both Mu insertion and meiotic recombination.     

Characterization of a Pseudomonas aeruginosa transposon insertion mutant with defective release of exoenzymes

A Pseudomonas aeruginosa transposon insertion mutant with defective release of several exoenzymes has been characterized. The Tn5-751 insertion mutation was located in the previously described xcp-1 locus at 0 min on the chromosomal map and caused several exoenzymes to remain in cell-bound form. At least one of the exoenzymes, elastase, was accumulated in the periplasmic space. The periplasmic elastase had the same Mr as the extracellular enzyme produced by the wild-type strain. The virulence of the mutant was comparable to that of wild-type strains in experimental burn infection in mice. The presence of an easily selectable antibiotic resistance marker in the xcp-1 locus offers the possibility of cloning the gene(s) involved in exoprotein secretion.     

A novel method for the rapid cloning in Escherichia coli of Bacillus subtilis chromosomal DNA adjacent to Tn917 insertions

Summary A rapid and general procedure has been devised for the pBR322-mediated cloning in Escherichia coli of Bacillus subtilis chromosomal DNA extending in a specified direction from any Tn917 insertion. Derivatives of Tn917 have been constructed that contain a pBR322-derived replicon, together with a chloramphenicol-resistance (Cm^r) gene of Gram-positive origin (selectable in B. subtilis), inserted by ligation in two orientations into a SalI restriction site located near the center of the transposon. When linearized plasmid DNA carrying such derivatives was used to transform to Cm^r B. subtilis bacteria already containing a chromosomal insertion of Tn917, the pBR322 sequences efficiently became integrated into the chromosomal copy of the transposon by homologous recombination. It was then possible to clone chromosomal sequences adjacent to either transposon insertion junction into E. coli, using a selection for ampicillin-resistance, by transforming CaCl₂-treated cells with small amounts of insert-containing DNA that had been digested with various restriction enzymes and then ligated at a dilute concentration. Because pBR322 sequences may be inserted by recombination in either orientation with respect to the transposon arms, a single restriction enzyme (such as EcoRi or SphI) that has a unique recognition site in pBR322 DNA may be used to separately clone chromosomal DNA extending in either direction from the site of any transposon insertion. A family of clones generated from the region of an insertional spo mutation (spoIIH::Tn917) was used in Southern hybridization experiments to verify that cloned material isolated with this procedure accurately reflected the arrangement of sequences present in the chromosome. Strategies are discussed for taking advantage of certain properties inherent in the structure of clones generated in this way to facilitate the identification and study of promoters of insertionally mutated genes.     

Comparison of two Xanthomonas campestris pathovar campestris genomes revealed differences in their gene composition

For the Xanthomonas campestris pathovar campestris wild-type strain B100 a plasmid-based clone library was constructed. The plasmids carried chromosomal fragments of 3-4 kb in size that were tagged in vitro with the artificial transposon KAN-2. More than 3000 of the transposon target sites were characterized by DNA sequencing. The sequences obtained were compared to the recently published genome of Xanthomonas campestris pathovar campestris strain ATCC 33913. Most of the sequenced clones derived from strain B100 matched the chromosomal sequence of strain ATCC 33913. An alignment to the circular map of this chromosome revealed that the similarities were statistically distributed over the entire genome of strain ATCC 33913. The similarity was obvious for protein coding sequences, as well as for mobile genetic elements. However, four regions in the genome of Xanthomonas campestris pathovar campestris strain ATCC 33913, ranging in size from 11 to 37 kb, were not represented in the sequenced clone library of Xanthomonas campestris pathovar campestris strain B100. On the other hand, 1.2% of the sequenced clones originating from Xanthomonas campestris pathovar campestris strain B100 showed no or insignificant similarities to the genome of strain ATCC 33913.