The use ofZoogloea ramigera in waste water treatment containing Cr(VI) and Cd(II) ions

Summary Optimum fermentation conditions forZ. ramigera were determined and various parameters which affected adsorption rates of chromium and cadmium ions onZ. ramigera were investigated. At 25°C the optimum adsorption pH of Cr(VI) and Cd(II) ions were 2.0 and 6.0 respectively. The adsorption rate of chromium and cadmium ion increased by increasing initial metal ion concentration up to 75 and 50 ppm respectively: at higher initial metal ion concentrations, the adsorption rates decreased.     

Specific Cd2+ uptake of encapsulated Aureobasidium pullulans biosorbents

Calcium alginate capsules containing Aureobasidium pullulans cells were prepared by an in-situ one-step method. The Cd²⁺uptakes of free biosorbent and capsule biosorbent were described well by the Freundlich isotherms. The Cd²⁺ uptake of capsule biosorbent was lower than that of free biosorbent with Cd^{2 +}at 100 mg l^–1. The total cadmium uptake of capsule biosorbent increased with the increase in encapsulated cell density and plateaued at a value of 23 g Cd²⁺/capsule with 150 g dry biosorbent l^–1 core volume of a capsule. The specific cadmium uptake of encapsulated biosorbent was 85% to that of free biosorbent at 35 g biosorbent dry weight l^–1 core volume of a capsule, decreased to 35% at 176 g biosorbent dry weight l^–1.     

Application of adsorption isotherms to chromium adsorption onZ.ramigera

Summary Adsorption isotherms for the adsorption of chromium onZoogloea ramigera are developed. The rates were affected by the pH and temperature of adsorption medium. The biomass ofZ. ramigera at pH 2.0 where the optimum pH for biosorption lies exhibited the highest chromium adsorptive uptake capacity. In general, higher adsorptive uptake was observed at 25°C than 35°C and 45°C.     

A flow injection analysis system with encapsulated high-density <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> cells for rapid determination of biochemical oxygen demand

The biochemical oxygen demand (BOD) determination was studied using a novel flow injection analysis (FIA) system with encapsulated Saccharomyces cerevisiae cells and an oxygen electrode and was compared with conventional 5-day BOD tests. S. cerevisiae cells were packed in a calcium alginate capsule at a dry cell weight of 250 g/l of capsule core. The level of dissolved oxygen (DO) was reduced due to the enhanced respiratory activity of the microbial cells when the injected nutrient passed through the bioreactor. The decrease in DO (ΔDO) was intensified with the amount of microbial cells packed in the bioreactor. However, the specific ΔDO decreased as the amount of cells loaded in the bioreactor increased. The ΔDO value was dependent on the pH and temperature of the mobile phase and reached its maximum value at 35°C and pH 7–8. Also, ΔDO became larger at longer response times as the flow rate of the mobile phase decreased. The measurement of ΔDO was repeated more than six times consecutively using a 20-ppm standard glucose and glutamic acid solution, which confirmed the reproducibility with a standard deviation of 0.95%. A strong linear correlation between ΔDO and BOD was also observed. The 5-day BOD values of actual water and wastewater samples were in accordance with the BOD values obtained by this FIA method using encapsulated S. cerevisiae cells. Unlike the cell-immobilized bead system, there was no contamination of the bioreactor resulting from any leak of yeast cells from the sensor capsules during BOD measurements.     

Evaluation of plastic composite-supports for enhanced ethanol production in biofilm reactors

Biofilms are a natural form of cell immobilization that result from microbial attachment to solid supports. Biofilm reactors with polypropylene composite-supports containing up to 25% (w/w) of various agricultural materials (corn hulls, cellulose, oat hulls, soybean hulls or starch) and nutrients (soybean flour or zein) were used for ethanol production. Pure cultures ofZymomonas mobilis, ATCC 31821 orSaccharomyces cerevisiae ATCC 24859 and mixed cultures with either of these ethanol-producing microorganisms and the biofilm-formingStreptomyces viridosporus T7A ATCC 39115 were evaluated. An ethanol productivity of 374g L^–1 h^–1 (44% yield) was obtained on polypropylene composite-supports of soybean hull-zein-polypropylene by usingZ. mobilis, whereas mixed-culture fermentations withS. viridosporus resulted in ethanol productivity of 147.5 g L^–1 h^–1 when polypropylene composite-supports of corn starch-soybean flour were used. WithS. cerevisiae, maximum productivity of 40 g L^–1 h^–1 (47% yield) was obtained on polypropylene composite-supports of soybean hull-soybean flour, whereas mixed-culture fermentation withS. viridosporus resulted in ethanol productivity of 190g L^–1 h^–1 (35% yield) when polypropylene composite-supports of oat hull-polypropylene were used. The maximum productivities obtained without supports (suspension culture) were 124 g L^–1 h^–1 and 5 g L^–1 h^–1 withZ. mobilis andS. cerevisiae, respectively. Therefore, forZ. mobilis andS. cerevisiae, ethanol productivities in biofilm fermentations were three- and eight-fold higher than suspension culture fermentations, respectively. Biofilm formation on the chips was detected by weight change and Gram staining of the support material at the end of the fermentation. The ethanol production rate and concentrations were consistently greater in biofilm reactors than in suspension cultures.This is Journal Paper No. J-16356 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project No. 3253     

Toxicity and accumulation of thallium in bacteria and yeast

Thallium sulphate inhibited microbial growth, withBacillus megaterium KM, more sensitive to the metal thanSaccharomyces cerevisiae andEscherichia coli. Inhibition ofB. megaterium KM andS. cerevisiae, but not ofE. coli, was alleviated by increasing the potassium concentration of the medium; inhibition of respiration ofS. cerevisiae, but not ofE. coli, was similarly alleviated. Thallium was rapidly bound, presumably to cell surfaces, byS. cerevisiae andE. coli, and was progressively accumulated by energy-dependent transport systems (probably concerned primarily with potassium uptake) with both organisms. Thallium uptake kinetics suggested more than one transport system operated in yeast, possibly reflecting a multiplicity of potassium transport systems. ApparentK _m andK _i values for competitive inhibition of thallium uptake by potassium indicatedS. cerevisiae to have a higher affinity for thallium uptake than for potassium, whileE. coli had a transport system with a higher affinity for potassium than for thallium. The likely systems for thallium transport are discussed. A mutant ofE. coli with tenfold decreased sensitivity to thallium was isolated and apparently effected surface binding of thallium in amounts equivalent to the wild type organism, but showed no subsequent uptake and accumulation of the metal from buffer, even though it was able to accumulate potassium to normal intracellular concentrations during growth. Abbreviations: Metal are referred to by their recognised atomic symbols (e.g. TI = Thallium; K = potassium; Co = cobalt)     

Differential responses of a mine tailings Pseudomonas isolate to cadmium and lead exposures

We examined cadmium and lead resistance in Pseudomonas sp. S8A, an isolate obtained from mine tailings-contaminated soil. Resistant to soluble metal concentrations up to 200 mg l⁻¹ cadmium and 300 mg l⁻¹ lead, S8A produced both exopolymer and biosurfactant. Upon growth, this pseudomonad diverged into two morphologically distinct colony subtypes; small and round or large and flat. In the presence of lead and in the no metal control the large morphotype appeared only in late stationary phase. With cadmium the large morphotype appeared immediately following exposure. Results show that the large morphotype produced greater amounts of surfactant than the small morphotype, suggesting a unique subpopulation response to cadmium toxicity. Results also indicate that an unidentified 28 kDa protein was expressed following exposure to >10 mg l⁻¹ cadmium. This study demonstrates new links between surfactant production, differential subpopulation response and metal exposure.     

Reusable biosorbents in capsules from zoogloea ramigera cells for cadmium removal

A biosorbent was prepared by immobilizing and culturing Zoogloea ramigera cells in calcium alginate capsules to high density. The biosorbent (the cell and its exopolysaccharide "Zooglan") along with the [calcium] alginate is known to be responsible for cadmium removal. The dry weight of the biosorbent reached 107 g/L after 3 days of cultivation and 220 g/L after 5 days based on the core volume of a 2.0-mm diameter capsule used. The biosorbents were completely contained in the core of the capsule where the cells grew preferentially near the shell of the capsules while the polymer distributed homogeneously in the core. The specific cadmium uptake by the capsule biosorbent was 1.9 mg/g adsorbent at an initial cadmium concentration of 3 mg/L. This is 1.24 times more than the specific cadmium uptake by the 1.8-mm beads prepared under a comparable condition. The capsules crosslinked with 1% triethylene tetramine and 1% glutamic dialdehyde solutions were superior to the uncrosslinked capsules in mechanical strength. The crosslinked capsules maintained their mechanical strength and adsorption/desorption capacity even after 30 cycles of repeated use. Copyright 1999 John Wiley & Sons, Inc.     

Selective antimicrobial action of chitosan against spoilage yeasts in mixed culture fermentations

The effect of chitosan on Saccharomyces cerevisiae (the yeast that carries out alcohol fermentation), Brettanomyces bruxellensis and Brettanomyces intermedius (contaminants of alcohol fermentations), was investigated. The effect of chitosan was tested on each yeast, as well as on mixed cultivations of S. cerevisiae + B. bruxellensis and S. cerevisiae + B. intermedius. Chitosan enhanced the lag period of both strains of Brettanomyces (80 h for B. bruxellensis and 170 h for B. intermedius with 6 and 2 g/l chitosan, respectively). The growth rate of S. cerevisiae was inversely proportional to the chitosan concentration; the former was 50% when 6 g/l polysaccharide was used. Moreover, in mixed cultivations of S. cerevisiae and Brettanomyces strains, it was found that both B. bruxellensis and B. intermedius failed to grow while growth of S. cerevisiae was not affected (using 3 and 6 g/l chitosan, respectively). An interesting collateral result was that the presence of chitosan accelerated the consumption of glucose in the mixed cultivations (60 h instead of 120 h).     

Immobilization of blue green microalgae on loofa sponge to biosorb cadmium in repeated shake flask batch and continuous flow fixed bed column reactor system

Summary An indigenous strain of blue green microalga, Synechococcus sp., isolated from wastewater, was immobilized onto loofa sponge discs and investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. Immobilization has enhanced the sorption of cadmium and an increase of biosorption (21%) at equilibrium was noted as compared to free biomass. The kinetics of cadmium biosorption was extremely rapid, with (96%) of adsorption within the first 5 min and equilibrium reached at 15 min. Increasing initial pH or initial cadmium concentration resulted in an increase in cadmium uptake. The maximum biosorption capacity of free and loofa immobilized biomass of Synechococcus sp. was found to be 47.73 and 57.76 mg g⁻¹ biomass respectively. The biosorption equilibrium was well described by Langmuir adsorption isotherm model. The biosorbed cadmium was desorbed by washing the immobilized biomass with dilute HCl (0.1 M) and desorbed biomass was reused in five biosorption–desorption cycles without an apparent decrease in its metal biosorption capacity. The metal removing capacity of loofa immobilized biomass was also tested in a continuous flow fixed-bed column bioreactor and was found to be highly effective in removing cadmium from aqueous solution. The results suggested that the loofa sponge-immobilized biomass of Synechococcus sp. could be used as a biosorbent for an efficient removal of heavy metal ions from aqueous solution.     

Accumulation of cadmium by immobilizedZoogloea ramigera 115

Summary Zoogloea ramigera 115 was immobilized into beads of calcium-alginate and placed into batch air-bubbled column reactors. In the absence of any added nutrients the immobilized bacterium adsorbed Cd from solutions containing levels of 2 and 20 g ml^–1 per day, over a period of 21 and 20 days, respectively. Adsorption of Cd from solutions containing 20 g ml^–1 Cd was better than 90% for 16 days. Beads treated with Cd at 2 g ml^–1 never adsorbed less than 95% of the metal. Alginate adsorbed Cd as well, but inclusion of cells changed the effectiveness of adsorption. Of a 250 g ml^–1 Cd solution, alginate adsorbed 70.4% Cd in 60 min whereas alginate plus cells adsorbed 90.5% in the same time span. Temperature had no effect on adsorption by immobilized cells at levels of 2 and 10 g ml^–1 Cd. However at higher concentrations, binding was enhanced as temperature increased.Z. ramigera beads were stable during all treatments and for prolonged periods of time (21 days).     

Rapid and extensive vacuolation of the budding yeastsSaccharomyces cerevisiae andCandida albicans by amphotericin B

The effect of amphotericin B (AMPH) on vacuolation in the budding yeastsSaccharomyces cerevisiae andCandida albicans was studied. The minimum inhibitory concentration of AMPH for growth ofS. cerevisiae andC. albicans was 1 µg/ml. In untreated control cultures, mature cells had large central vacuoles in the exponential phase, which hampered the detection of vacuolation effect. Small buds in untreated exponential phase cells, however, only rarely showed vacuoles under the light microscope. Treatment with 0.2 µg/ml of AMPH for 20–30 min induced extensive vacuolation not only in mothers but also buds ofS. cerevisiae. Extensive vacuolation lasted 4 h or more, and growth rate of the cells was much reduced for 8 h or more. Vacuolation itself was not fatal: on removal of the drug most cells gradually recovered from vacuolation and eventually multiplied. A similar effect of AMPH was also observed inC. albicans but at a higher concentration (0.5 µg/ml).     

Biosorption of cadmium,copper and lead by isolated mother cell walls and whole cells of Chlorella fusca

Using a new method for the isolation of released mother cell walls of Chlorella fusca, the biosorption of cadmium, copper and lead by purified cell wall isolates and whole cell suspensions was comparatively characterized. In all cases whole cells accumulated more metal ions than isolated cell walls. Both the Langmuir and Freundlich isotherm models were suitable for describing the short-term adsorption of cadmium, copper and lead by cell walls and the cadmium and copper adsorption by whole cells. However, neither model could sufficiently explain the lead accumulation by whole cells. The feasibility of a practical use of whole cells or isolated cell walls as biosorbents is discussed.     

Cadmium uptake by non-viable biomass from a marine brown algaEcklonia radiata turn

Biomass of non-viable and dried brown marine algaeEcklonia radiata Turn. was used to examine its cadmium uptake capability. Twelve different pretreatments on the algal biomass were prepared. Among these pretreatments, the algal biomass, which treated with 0.1 M NaOH and kept in water bath (100°C, 18 h) followed by washing with distilled water and squeezing, showed the highest amount of cadmium uptake as 1634±195 mg/g dry biomass at pH 4.0 and 50°C. Adsorption temperatures and pH levels played some important role in cadmium uptake. However, cadmium uptake decreased dramatically at a lower pH than 4.0. Freundlich adsorption isotherm showed potent cadmium uptake capacity of the non-viable biomass. Pretreatments on the nonviable algal biomass shown in this study may enhance the cadmium removal in the industrial wastewater.     

Role of Oxidative Phosphorylation in Histatin 5-Induced Cell Death in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The succeptibility of Saccharomyces cerevisiae to the anti-microbial peptide, histatin 5, was tested after pre-growth in fermentable and non-fermentable carbon sources and in the absence or presence of the uncoupler of oxidative phosphorylation, carbonyl cyanide m-chlorophenylhydrazone (CCCP). S. cerevisiae was more resistant to histatin 5 when grown on a fermentable carbon source compared to growth on a non-fermentable carbon source, indicating an important role for oxidative phosphorylation in histatin 5-induced cell death. Oxidative phosphorylation is a pre-requisite for histatin 5-induced cell death in Candida albicans but this is not the case in S. cerevisiae. Incubation of CCCP-treated S. cerevisiae cells with histatin 5 still resulted in cell death. These results suggest that histatin 5-induced cell death in S. cerevisiae differs from that in C. albicans.Revisions received 28 September 2004     

酿酒酵母细胞中内质网应激与未折叠蛋白反应的研究进展

内质网应激激活的未折叠蛋白反应(Unfolded protein response,UPR)途径在酿酒酵母和哺乳动物细胞中是非常保守的。内质网(Endoplasmic reticulum,ER)是蛋白质合成、折叠和修饰的细胞器,也是贮存钙的主要场所之一。酵母细胞内质网钙平衡与UPR的作用是相互的;两个MAPK途径——HOG途径和CWI途径都是细胞应答内质网应激压力时生存所必需的;重金属镉离子能够激活UPR途径,它通过激活钙离子通道Cch1/Mid1进入细胞影响钙离子的功能。本文结合最新研究进展对酿酒酵母细胞中的两个MAPK途径、镉离子和钙离子稳态与内质网应激激活的UPR途径之间相互关系进行综述。     

The function of Alr1p of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> in cadmium detoxification: Insights from phylogenetic studies and particle-induced X-ray emission

Two genes in Saccharomyces cerevisiae, ALR1 and ALR2, encode transmembrane proteins involved in Mg²⁺ uptake. The present study investigates the phylogenetic relationship of Alr1p/Alr2p with bacterial CorA proteins and some proteins related to Mg²⁺influx/efflux transport in mitochondrial and bacterial zinc transporters; including hydrophobic cluster analysis (HCA). The phylogenetic results indicate that the Alrp sequences of S. cerevisiae share a common carboxy-terminus with proteins related to zinc efflux transport. We also analyse the intracellular metal content by particle-induced X-ray emission (PIXE) after cell exposure to cadmium. The PIXE analysis of cadmium-exposed ALR mutants and wild-type yeast cells suggests that Alrp has a central role in cell survival in a cadmium-rich environment. Published online December 2004 Ana Lúcia Kern, Diego Bonatto: Both authors contributed equally to this work.     

Immunological evidence for the involvement of cell wall proteins in phosphate uptake in the yeast Saccharomyces cerevisiae

Immunological cross-reactivity between cell wall proteins obtained from two yeast genera (Candida tropicalis and Saccharomyces cerevisiae) is reported. Specific retention of two cell wall proteins from Saccharomyces cerevisiae by an immunoabsorbent column coupled with antibodies against phosphate binding protein 2 (PiBP2) from Candida tropicalis allowed to generate antibodies against the proteins from S. cerevisiae. These antibodies were effective in inhibiting phosphate uptake by S. cerevisiae cells. The proteins from S. cerevisiae displayed a phosphate binding activity which was inhibited in the presence of the forementioned antibodies. These results and the observation that the amount of these proteins in the shock fluid was dependent of the growth conditions (i.e., in the presence or in the absence of phosphate) support the idea that these proteins are involved in the high affinity phosphate transport system.Abbreviations Pi inorganic phosphate - PiBP2 phosphate binding protein 2 obtained from Candida tropicalis - Tris Tris(hydroxymethyl)-aminoethane - MES [2-(N-Morpholino)] ethanesulfonic acid - EDTA ethylene diamine tetraacetic acid, disoldium salt - PMSF phenylmethyl sulfonyl fluoride - SDS sodium dodecyl sulfate - SDS-PAGE sodium dodecyl sulfate polyacrylamide gel electrophoresis     

Cadmium biosorption by Streptomyces pimprina waste biomass

Biosorption of cadmium from solution was studied using a hamycin-producing Streptomyces pimprina waste biomass. Mycelial pretreatments with 80% ethanol increased the uptake of cadmium threefold. The rate of uptake of the metal was maximum in the first 10 min and the equilibration of the system was achieved after 60 min. At pH 2.0 there was no adsorption of cadmium; however, as the pH of the solution increased, a rise in the adsorption could be noticed, which peaked at pH 5.0. The uptake of cadmium was found to increase linearly as a function of cadmium concentration up to 500 mg/l. The data could be fitted to Freundlich and Langmuir models for absorption processes. A 0.1 M EDTA solution could desorb cadmium loaded on S. pimprina biomass with the highest efficiency.