Ultrastructural architecture and mechanical properties of attachment pads in Tettigonia viridissima (Orthoptera Tettigoniidae)

Natural releasable attachment systems of insect legs, where attachment-detachment performances are often very fast, seem to be optimized to get a maximum of real contact to the substratum. Tarsi of Tettigonia viridissima bear flexible attachment pads with unusual ultrastructural architecture of the cuticle. The indentation of the attachment pads was measured under different loads using a force-tester. Since the mechanical properties are influenced by material structure, the freeze-substitution experiments were undertaken to investigate the influence of loads on material structure. Both profile changes of the surface and the orientation of cuticle microfibrils were visualized by means of scanning electron microscopy followed by fracturing of the frozen material. The results show that the flexible pad material deforms replicating the substrate profile down to the micrometer roughness. The pad material showed both elastic and viscous behavior under loads. Elastic deformation of the pad occurred under normal force applied for 4-6 s (elastic modulus 27.2 +/- 11.6 kPa). Two viscous relaxation processes were found, of time constants tau1 = 1.88+/-0.616 s and tau2 =41.2 +/- 9.95 s. Low stiffness of material studied here aids in surface replication and increase of area of real contact between the pad and the underlying substrate.     

Micromechanics of smooth adhesive organs in stick insects: pads are mechanically anisotropic and softer towards the adhesive surface

Animals have evolved adhesive structures on their legs to cling to the substrate during locomotion. Here we characterise the ultrastructure and mechanical properties of adhesive pads in Carausius morosus (Phasmatodea) using atomic force microscopy (AFM) as well as transmission and scanning electron microscopy (TEM, SEM). The smooth adhesive arolium has a soft cuticle consisting of principal rods, which branch into finer fibres near the surface. Indentation experiments showed that the pad material consists of distinct layers with different mechanical properties. The 100–300 nm thick outermost layer consisting of the cuticulin envelope and the epicuticle is extremely soft and resilient (mean effective Young’s modulus 12 kPa), while the subjacent procuticle is a much stiffer material (mean effective Young’s modulus 625 kPa). AFM contact mode imaging revealed that the cuticle is mechanically anisotropic, which can be explained by its fibrillar inner structure. We propose that the described layered structure of smooth adhesive pads, consisting of materials decreasing in stiffness towards the outer surface, represents a superior design to conform and adhere to substrates with roughnesses at different length scales. This design principle could be easily implemented in technical adhesives, and thus has a potential to inspire biomimetic applications.     

Ultrastructural Features of Three Ectocommensal Protozoa Attached to the Gills of the Red Swamp Crawfish,Procambarus clarkii (Crustacea: Decapoda)1

Because heavy branchial infestations are thought to interfere with respiration, we examined the attachment of three stalked ciliates commonly found in the branchial chambers of Louisiana crawfish. Attachments by Cothurnia sp., Epistylis sp. and Acineta sp. differ in their fine structure. Stalks of the peritrichous ciliates. Cothurnia and Epistylis, contain striated tubules that differ in their arrangement, diameter, and in the periodicity of their striations. In both species the striated tubules branch within the basal disk and attach to a pad of adhesive material secreted by the organism during initial attachment to the gill surface. The stalk of the suctorian Acineta is composed of a striated honeycomb-like matrix. Within the basal disc the matrix is disorganized; however, striated elements anchor the stalk to a pad of adhesive material. Attachment sites also differ in the amount of secretory material deposited. Cothurnia forms a multi-layered, granular pad; Epistylis forms an indistinct, microfibrillar layer, and Acineta deposits a thick mucoid pad. None of the ciliates appear to damage the gill epicuticle nor is there an obvious host response. Harmful effects are probably limited to a decrease in respiratory surface area and disruption of normal water flow patterns. This may impair respiration sufficiently to increase the susceptibility of crawfish to low dissolved oxygen concentrations encountered periodically in commercial crawfish ponds.     

Light and electron microscopic analyses of the high deformability of adhesive toe pads in White's tree frog,Litoria caerulea

White's tree frog (Litoria caerulea) has large, adhesive toe pads that are among the softest of all known biological structures. To explore the morphological basis for the physical properties of the toe pads, the internal microstructure of the toe pads in L. caerulea was examined using both light and transmission electron microscopy. Three design elements that are distinct from other areas of skin were observed. First, the keratinocytes comprising the adhesive surface of the toe pad all contained keratin filament bundles (tonofibrils) exhibiting structural anisotropy. Specifically, the curved conformation of the hierarchical (branching) tonofibrils was characterized by the formation of anastomoses consisting of tonofibrils beneath the adhesive cell surface and stem keratin filament bundles concentrated in the lower‐middle part of the dorsal‐side of adhesive cells. Second, the cytoplasm of keratinocytes in the most superficial cell layer contained glycoproteins (stained by periodic acid/Schiff reagent) that are considered to confer high viscoelasticity. Third, the dermis contained large lymph spaces interspersed with elastic fibers and collagen fibers, which were relatively sparsely distributed compared to the dorsal skin of the toe pads. The profiles of these structures were easily deformed by the slight application of pressure. These findings reaffirmed that the unique internal architecture of the toe pads in L. caerulea contributed to their remarkable softness and high deformability, which in turn increased the contact area and provided improved adaptability to the local topography of natural surfaces. J. Morphol. 277:1509–1516, 2016. © 2016 Wiley Periodicals, Inc.     

Tarsal attachment devices of the southern green stink bug Nezara viridula (Heteroptera: Pentatomidae)

Based on analyses with cryo‐scanning and transmission electron microscopy, the present study reports on the morphology and ultrastructure of the attachment structures of the green stinkbug Nezara viridula L. (Heteroptera: Pentatomidae), a cosmopolitan pest of different crops in most areas of the world. In addition, the presence and distribution of large proportions of the elastic protein resilin in these structures was revealed by confocal laser scanning microscopy. The attachment structures of each leg comprise two sclerotised claws, a pair of smooth flexible pulvilli and a hairy adhesive pad located at the ventral side of the basitarsus. No sexual dimorphism is evident. Contact areas of resting individuals on a smooth surface show that N. viridula creates contact to the substrate with the ventral surface of (a) the distal portions of the pulvilli, (b) the setae of the hairy adhesive pad, (c) the two paraempodia representing mechanosensory setae, and (d) the tips of the claws. Each pulvillus is a sac‐like structure formed by complex cuticular layers that vary in their structure and resilin content. The dorsal side consists of sclerotised chitinous material, while the ventral cuticle consists mainly of resilin and shows a very thin epicuticle and a thick exocuticle. The setae of the hairy adhesive pad are pointed and socketed. They exhibit a pronounced longitudinal gradient in the material composition, with large proportions of resilin being present in the setal tips. In most of these setae, especially in those of the distal‐most part of the pad, also a transverse gradient in the material composition is visible.     

Biological microtribology: anisotropy in frictional forces of orthopteran attachment pads reflects the ultrastructure of a highly deformable material

Evolutionarily optimized frictional devices of insects are usually adapted to attach to a variety of natural surfaces. Orthopteran attachment pads are composed of hexagonal outgrowths with smooth flexible surfaces. The pads are designed to balance the weight of the insect in different positions and on different materials. In a scanning electron microscopy study followed by freezing-substitution experiments, the ultrastructural architecture of the pad material was visualized. In friction experiments, the interaction was measured between the attachment pad and a polished silicon surface. The inner structure of this material contains distally directed rods, branching close to the surface, and spaces filled with fluid. The specific design of the pad material provides a higher frictional force in the distal direction. Frictional anisotropy is more enhanced at higher normal forces and lower sliding velocities. It is concluded that optimal mechanical functionality of biosystems is the result of a combination of surface structuring and material design.     

Histochemical and ultrastructural analyses of adhesive setae of lizards indicate that they contain lipids in addition to keratins

We studied the distribution of lipid material and organelles in the epidermal layers of toe pads from two species of lizards representing the two main lizard families in which adhesive scansors are found (gekkonids and polychrotids), the dull day gecko, Phelsuma dubia and the green anole, Anolis carolinensis. Although lipids are a conspicuous component of the mesos layer of squamate reptiles and function in reducing cutaneous water loss, their distribution has not been specifically studied in the highly elaborated epidermal surface of adhesive toe pads. We found that, in addition to the typical cutaneous water loss‐resistant mesos and alpha‐layer lipids, the Oberhäutchen (including the setae) on the most exterior layers of the epidermis in P. dubia and A. carolinensis also contain lipid material. We also present detailed histochemical and ultrastructural analyses of the toe pads of P. dubia, which indicate that lipid material is closely associated spatially with maturing setae as they branch during the renewal phase of epidermal regeneration. This lipid material appears associated with the packing of keratin within setae, possibly affecting permeability to water loss in the pad lamella, where the surface area is from 4–60‐fold greater compared with normal scales. J. Morphol., 2011. © 2011 Wiley‐Liss, Inc.     

Elastic modulus of tree frog adhesive toe pads

Previous work using an atomic force microscope in nanoindenter mode indicated that the outer, 10- to 15-??m thick, keratinised layer of tree frog toe pads has a modulus of elasticity equivalent to silicone rubber (5?C15?MPa) (Scholz et al. 2009), but gave no information on the physical properties of deeper structures. In this study, micro-indentation is used to measure the stiffness of whole toe pads of the tree frog, Litoria caerulea. We show here that tree frog toe pads are amongst the softest of biological structures (effective elastic modulus 4?C25?kPa), and that they exhibit a gradient of stiffness, being stiffest on the outside. This stiffness gradient results from the presence of a dense network of capillaries lying beneath the pad epidermis, which probably has a shock absorbing function. Additionally, we compare the physical properties (elastic modulus, work of adhesion, pull-off force) of the toe pads of immature and adult frogs.     

Gripping ease in southern green stink bugs Nezara viridula L. (Heteroptera: Pentatomidae): Coping with geometry,orientation and surface wettability of substrate

The southern green stink bug Nezara viridula L. (Heteroptera, Pentatomidae) is highly polyphagous, preferring apically situated seeds and fruits on more than 150 plant species belonging to over 30 plant families all over the world. This forces them to move over highly variable terrains, including plant stems, leaves, pods and buds, which requires efficient attachment. Stink bugs have long slender legs and feet (tarsi) equipped with paired curved claws, paired soft adhesive pads (pulvilli), and flattened lanceolate hairs (setae), which arise ventrally on the first and second foot segments (tarsomeres). To characterize their attachment abilities on well‐defined test substrates, here we comparatively measured and analyzed the traction forces of bugs walking horizontally and vertically on hydrophilic (water attractive) and hydrophobic (water repellent) glass plates and rods. The latter correspond to the geometry of preferred feeding sites of stink bugs in the field. The results show a clear contribution of tarsal flattened lanceolate hairs to the stink bug's attachment. Higher traction forces are generated on a glass rod than on a glass plate, corresponding to up to individual maximum of 43 times the stink bug's body weight. Substrate hydrophobicity promotes the attachment, while the measured forces are up to eight times lower when tarsal hairs are disabled. The combination of smooth and hairy tarsal pads results in a remarkable attachment ability, which enables N. viridula to climb unstable apical plant parts, and supports their invasive behavior and global dispersion.     

Microstructure of pretarsal pulvilli in shield bug Acanthosoma spinicolle (Heteroptera: Acanthosomatidae)

Shield bugs effectively attach themselves on both rough and smooth surfaces, but their advanced biological attachment devices have not been studied closely. Our fine structural examination of the attachment devices in the shield bug A. spinicolle reveals a unique system to achieve extraordinary adhesion that allows vertical climbing. Each appendage has a pair of tarsal claws that attach to rough substrates and a pair of pretarsal pulvilli that attach to smooth surfaces. Similar to other heteropteran insects, the pulvilli of this bug are categorized as a wet adhesion system, which makes use of an adhesive fluid from the pad secretion. However, this deformable pad creates a regular pattern of contact with the mating surface with a compact array of microfolds and setae with filamentous distal protrusions. To date, this distinctive microstructure in pulvilli pads has never been reported. These microstructural characteristics should be further studied to understand biological adhesion as well as create biomimetic applications.     

Development of the subdigital adhesive pads of Ptyodactylus guttatus (Reptilia: Gekkonidae)

Subdigital adhesive pads play an important role in the locomotion of many species of gekkonid lizards. These pads consist of integrated components derived from the epidermis, dermis, vascular system, subcuticular tendons, and phalanges. These components become intimately associated with each other during the developmental differentiation of the digits and the sequence of this integration is outlined herein in Ptyodactylus guttatus. The pads initially appear as paired swellings at the distal tips of the digits. Subsequently, a fan-like array of naked scansors develops on the ventral surface of each digit, at about the same time that scales differentiate over the surface of the foot as a whole. At the time of appearance of the naked scansors, the vascular sinus system of the pad also differentiates, along with subcuticular connective tissue specializations. At this stage the digits, along with the rest of the body, are clad in an embryonic periderm. Only after hatching and as the periderm is shed, do the epidermal setae and spines appear. The developmental sequence described here is consistent with predictions previously advanced about the evolutionary origin and elaboration of subdigital pads in gekkonid lizards. The paucity of available staged embryonic material leaves many questions unresolved.     

Structural correlates of increased adhesive efficiency with adult size in the toe pads of hylid tree frogs

Tree frogs are able to climb smooth, vertical substrates using specialised toe pads which adhere via an area-based wet adhesive mechanism. Although the link between pads and arboreality in frogs is well-established, few studies have investigated the influence of morphology on adhesion. Trinidadian tree frogs from the genus Hyla are geometrically similar. There is a tendency towards comparatively reduced mass in larger species, but toe pad area increases as expected with isometry. As adhesion is area-dependent, forces are affected directly by the increase in mass relative to pad area, and there is a decrease in the ability of larger species to adhere to smooth rotation platforms. However, there is an increase in force per unit area that suggests larger species have more efficient toe pads. Toe pad structure is very similar though there are variations in the details of a number of features. Crucially, although differences in morphology appeared small they had demonstrable effects on adhesive efficiency of the pads. Epithelial cell area correlates positively with frog length and adhesive efficiency, related features of cell density and intercellular channel length correlate negatively. These findings are discussed in relation to the different forces involved in the tree frogs’ wet adhesive system.     

Durability of Simuliid Silk Pads (Simuliidae,Diptera)

A central aspect of simuliid adaption to life in moving water is a silky secretion which they produce in their salivary glands. This secretion is spread on the substrate surface thereby enabling adhesion of the posterior abdominal hooks of the larvae to the substrate surface. Therefore, silk pads are a prerequisit for simuliid filter‐feeding as well as any kind of locomotive activity. If silk pad adhesion is weak, larvae risk drifting off, either directly or during locomotion. Properties of the adhesive (=silk) as well as the substrate surface may cause weak adhesion. A specialist such as S. noelleri which has little chance of surviving after drifting off its lake outlet habitat, should have adaptations to reduce this risk. Such an adaptation could be very durable silk pads, giving larvae the chance to be safely attached for a relatively long time. In this study larval silk pads of S. ornatum and S. noelleri were stained using Giemsa's staining procedures. Changes in silk pad structure and traces of rot after 2–33 days of exposure to stream water were recorded and compared. Silk pads of S. ornatum and S. noelleri showed differences which indicate differences in ageing processes and biochemistry of this secretion.     

Fine structural analysis of the fibrillar adhesion apparatus in ladybird beetle

The attachment system on the ladybird beetle Harmonia axyridis is composed of a pair of pretarsal claws and adhesive pads at the tarsal segments. The claws, which are connected to the pretarsal segment, are mainly used to hold the rough substrates by their apical diverged hooks. In contrast, the adhesive pads have an adhesive function when landing on smooth surfaces. They are interspersed at the ventral adhesive pad of each tarsomere, and are composed of two kinds of hairy setae. The discoid tip seta (DtS) is located at the central region of each adhesive pad. The DtS has a spoon‐shaped endplate with a long and narrow shaft. In contrast, the pointed tip seta (PtS) is interspersed along the marginal regions of each adhesive pad, and has a hook‐shaped spine near the tip. In the present study, we found numerous fine cuticular pores beneath the setae, which seem to be related to the secretion of some adhesive fluids. It may be deduced that ladybird beetles can attach to smooth surfaces more effectively by employing adhesive fluids filling in surface crevices to overcome problems cause by their larger size endplates.     

The structure of anoline (Reptilia: Dactyloidae: Anolis) toe pads in relation to substratum conformity

Adhesive toe pads of geckos house modified components of vascular and/or connective tissues that promote conformity of the setal fields with the locomotor substratum. Similar modifications have been claimed for the digits of Anolis, but evidence for them is not compelling. Angiographic and histological investigations of Anolis failed to identify any evidence of either an intralamellar vascular reticular network or a central sinus. Instead, their vascularity more closely resembles that of lizards in general than that of pad‐bearing geckos. The loose connective tissue of the toe pads likely contributes to their general pliability and flexibility, promoting localized compliance with the substratum. Through the shedding cycle, the lamellae change shape as the replacing setae elongate. The outer epidermal generation lacunar cells on the inner lamellar faces simultaneously hypertrophy, providing for compatibility between overlapping lamellae, enabling reciprocity between them. This contributes to continuing compliance of the setal fields with the substratum. Overall, digital structure and attachment and release kinematics of the toe pads of Anolis are very similar to those of geckos exhibiting an incipient adhesive mechanism. Both lack major anatomical specializations for promoting conformity of the setae with the locomotor substratum beyond those of the seta‐bearing portions of the epidermis.     

A new Polygordius (Annelida: Polychaeta) from Terra Nova Bay, Ross Sea, Antarctica

Polygordius antarcticus sp. nov. is described from benthic material collected at depths ranging between 31 and 61 m in Terra Nova Bay, Ross Sea, during the 1987–1988 and 1988–1989 expeditions of the Italian National Research Program in Antarctica. This is the first named species of the genus from Antarctic waters. Although no fully mature specimens were available, the new species appears unique in combining the following features: a regular pygidium, inflated and with a single ring of round adhesive pads, a conical prostomium with short antennae (only half as long as the prostomium) and shallow head fold, and a well-developed circulatory apparatus, with circumoesophageal commissures entering the prostomium and long intersegmental commissures insinuating into the ventrolateral compartments of the trunk. These and other significant features were investigated by light and scanning electron microscopy. In the construction of the head and the scheme of the blood system, the new species resembles Polygordius triestinus Woltereck, described by Hempelmann in 1906, an aberrant species inhabiting muddy, anoxic sediments in the Adriatic Sea, but it differs significantly from it in the shape of the mouth (in P. triestinus the upper lip is hypertrophied and strongly protruding) and the pygidium (in P. triestinus this region is stump-like and non-adhesive). The pygidium of P. antarcticus sp. nov. is encircled by 28–30 small adhesive pads, each with 15–20 glandular openings. Preterminal cirri are lacking, as are perianal appendages. The anus is surrounded by six to seven lobes of which the midventral is largest and longest. A world distribution map of the genus is provided. Accepted: 27 August 1998     

Spider silk softening by water uptake: an AFM study

We have investigated the mechanical properties of spider dragline fibers of three Nephila species under varied relative humidity. Force maps have been collected by atomic force microscopy. The Young’s modulus E was derived from the indentation curves of each pixel by the modified Hertz model. An average decrease in E by an order of magnitude was observed upon immersion of the fiber in water. Single fiber stretching experiments were carried out for comparison, and also showed a strong dependence on relative humidity. However, the absolute values of E are significantly higher than those obtained by indentation. The results of this work thus show that the elastic properties of spider silk are highly anisotropic, and that the silk softens significantly for both tensile and compressional strain (indentation) upon water uptake. In addition, the force maps indicate a surface structure on the sub-micron scale.     

Cytokeratin localization in toe pads of the anuran amphibian Philautus annandalii (Boulenger, 1906)

We have examined cytokeratin distribution and their nature in toe pads of the Himalayan tree-frog Philautus annandalii. Toe pads are expanded tips of digits and show modifications of their ventral epidermis for adhesion. The toe pad epidermal cells, being organized into 3–4 rows, possess keratin bundles, especially in surface nanostructures that are involved in adhesion. Immunohistochemical localization using a pan-cytokeratin antibody revealed that cytokeratin immunoreactivity is the strongest in the mid- to basal cell rows of the epidermis, which parallels our previous ultrastructural observation of dense keratin bundles present in this part of the epidermis. The remainder of the epidermis (i.e., the superficial cell layer) showed little immunoreactivity. Immunoblot analysis revealed that toe-pads possessed keratins prominently in the molecular mass of 50 kDa. Possible presence of keratin 5 in toe pad epidermis has been correlated with its usual distribution pattern in mammalian epidermis.     

The functional morphology and attachment mechanism of pandarid adhesion pads (Crustacea: Copepoda: Pandaridae)

The attachment mechanism of pandarid adhesion pads is described from observations of their externally ridged structure and internal construction in three species; Pandarus bicolor Leach, 1816, Dinemoura latifolia (Steenstrup and Lutken, 1861) and Echthrogaleus coleoptratus (Guerin-Meneville, 1837). The host's external skin morphology was also examined, since parasite attachment mechanism and host surface can be considered as components of a single system.

The results emphasise the importance of the physical nature of the pad's surface. This is inferred from the compliance of the cuticle and subsurface structure, and the presence of cuticular ridging. The pads probably prevent pandarids from being dislodged by hydrodynamic drag, by increasing overall adhesion. It is proposed that this is achieved in different ways, by two types of adhesion pad identified here, distinguishable by their external structure and location. Type I pads are suggested to remove interfacial water and increase surface contact by one of two contrasting methods. The ridges may act as tyre treads, by channelling water from the contact surface. Alternatively, the channels between ridges may be hydrophobic and behave as dewetting structures, preventing water from entering in the same way that troughs between surface nodules function to produce superhydrophobicity on lotus leaves. Type I adhesion pads are also suggested to aid attachment by hindering the process of peeling, by which they are thought to be removed by hydrodynamic drag. Type II pads are more likely to function as one-way frictional attachments. Both types of pad appear to be attached passively, since they lack muscles inserting into them. The adhesive mechanism of each, which functions most effectively on hard surfaces, may explain why pads are absent or reduced on pandarids which parasitise the softer, unscaled surfaces of hosts.

Pandarids predominantly parasitise the skin and fins of fast-swimming sharks. This may be because the scales are characteristically smaller in these species and are more easily encircled by the primary attachment appendages, the maxillipeds.

This is thought to be the first published report to reveal frictional attachment structures from the Crustacea, which have convergently evolved in many terrestrial Arthropoda.