Structure and function of Tn5467, a Tn21-like transposon located on the Thiobacillus ferrooxidans broad-host-range plasmid pTF-FC2.

A 3.5-kb region of plasmid pTF-FC2, which contains a transposon-like element designated Tn5467, has been sequenced, and its biological activity has been investigated. The transposon is bordered by two 38-bp inverted repeat sequences which have sequence identity in 37 of 38 and in 38 of 39 bp to the tnpA distal and tnpA proximal inverted repeats of Tn21, respectively. Within these borders, open reading frames with amino acid similarity to a glutaredoxin-like protein, a MerR regulatory protein, and a multidrug-resistant-membrane transport-like protein were found. The gene for the glutaredoxin-like protein was expressed in Escherichia coli and enabled growth of a glutathione-requiring E. coli trxA gshA mutant on minimal medium and the reduction of methionine sulfoxide to methionine. In addition, there were two regions which, when translated, had homology to 85% of the N-terminal region of the Tn21 resolvase (tnpR) and to 15% of the C terminus of the Tn21 transposase (tnpA). A region containing res-like sites was located immediately upstream of the partial tnpR gene. Neither the partial transposase nor the resolvase genes of Tn5467 were biologically active, but Tn5467 was transposed and resolved when the Tn21 transposase and resolvase were provided in trans. Tn5467 appears to be a defective transposon which belongs to the Tn21 subgroup of the Tn3 family.     

Complete nucleotide sequence of Tn1721: gene organization and a novel gene product with features of a chemotaxis protein.

The complete 11,139-nucleotide sequence of transposon Tn1721 has been determined. It contains three 38-bp inverted repeats, and (in this order) a new orfI, a resolution site (res), genes encoding resolvase (tnpR), transposase (tnpA), tetracycline-resistance (TcR) repressor (tetR), TcR (tetA) and a truncated transposase gene (tnpA'). The modulator origin of Tn1721 from at least three separate sources is supported by the distinctive codon usages of orfI, tnpR/tnpA and tetR/tetA, and by sequence similarities with Tn501 (tnpR/tnpA) and RP1 (tetR/tetA). The ORFI-encoded 56-kDa polypeptide exhibits features of a methyl-accepting chemotaxis protein (MCP) with a conserved signal domain and a potential transmembrane domain; this polypeptide cross-reacts with anti-MCP antiserum. Like chemotaxis genes, orfI is transcribed from a sigma 28-like promoter. The overexpressed orfI gene product interferes with MCP-dependent chemotaxis suggesting that it completes for soluble transducer protein(s) in the cell. The potential selective advantage of this novel transposon-borne gene is discussed.     

Toluene transposons Tn4651 and Tn4653 are class II transposons

The toluene degradative transposon Tn4651 is included within another transposon, Tn4653, and both of these elements are members of the Tn3 family. The tnpA gene product of each element mediates formation of cointegrates as intermediate products of transposition, and the tnpS and tnpT gene products encoded by Tn4651 take part in resolution of both Tn4651- and Tn4653-mediated cointegrates. Sequence analysis demonstrated that Tn4651 and Tn4653 have 46- and 38-base-pair terminal inverted repeats, respectively, and that both elements generate 5-base-pair duplication of the target sequence upon transposition. Complementation tests of the Tn4651- and Tn4653-encoded transposition functions with those of Tn3, Tn21, and Tn1721 showed that (i) the trans-acting transposition functions encoded by Tn4651 were not interchangeable with those encoded by the four other transposons, (ii) the Tn4653 tnpA function was interchangeable with the Tn1721 function, and (iii) Tn4653 coded for a resolvase (tnpR gene product) that complemented the tnpR mutations of Tn21 and Tn1721. The Tn4653 tnpR gene was located just 5' upstream of the tnpA gene and shared extensive sequence homology with the Tn1721 tnpR gene. The res region was located adjacent to the tnpR gene, and sequence analysis indicated that failure of the Tn4653 tnpR product to resolve the Tn4653-mediated cointegrates is ascribed to an incomplete structure of the res region.     

Transposon-encoded site-specific recombination: nature of the Tn3 DNA sequences which constitute the recombination site res.

The tnpR gene of transposon Tn3 encodes a site-specific recombination enzyme that acts at res, a DNA region adjacent to tnpR, to convert co-integrate intermediates of interreplicon transposition to the normal transposition end-products. We have used two complementary approaches to study the nature of the Tn3 recombination region, res. Firstly, the DNA-binding sites for tnpR protein were determined in DNase I protection experiments. These identified a 120-bp region between the tnpA and tnpR genes that can be subdivided into three separate protein-binding sites. Genetic dissection experiments indicate that few, if any, other sequences in addition to this 120-bp region are required for res function. Moreover, we have shown that the two directly repeated res regions within a molecule are unequal partners in the recombination reaction: a truncated res region, which is unable to recombine with a second identical res region, can recombine efficiently with an intact res region. This demonstration, along with the observation that tnpR/res recombination acts efficiently on directly repeated res regions within a molecule but inefficiently both on inverted res regions in the same molecule and in the fusion reaction between res regions in different molecules, leads us to propose that one-dimensional diffusion (tracking) of tnpR protein along DNA is used to locate an initial res region, and then to bring a second directly repeated res region into a position that allows recombination between the res regions.     

Transposon-mediated site-specific recombination in vitro: DNA cleavage and protein-DNA linkage at the recombination site

Resolvase, the product of the tnpR gene of the transposable element gamma delta, mediates a site-specific recombination between two copies of the element directly repeated on the same replicon. The resolution site, res, at which resolvase acts lies in the intercistronic region between the tnpA and tnpR genes. We have studied this site-specific recombination in vitro. In the absence of Mg2+, a resolvase-res complex is formed, which contains DNA molecules that have been cleaved at res. Our data suggest that in this complex resolvase is covalently attached to the 5' ends of the cleaved DNA, leaving free 3' hydroxyl groups. DNA cleavage is stimulated by the interaction of two res sites on the same substrate molecule and appears to be an intermediate step in normal res site recombination. We show that the DNA is cut within a region previously identified as containing the crossover point at the palindromic sequence 5'- (see formula in text) to generate 3' extensions of two bases.     

Tn5053 family transposons are res site hunters sensing plasmidal res sites occupied by cognate resolvases

DNA sequence database search revealed that most of Tn5053/Tn402 family transposons inserted into natural plasmids were located in putative res regions upstream of genes encoding various resolvase-like proteins. Some of these resolvase genes belonged to Tn3 family transposons and were closely related to the tnpR genes of Tn1721 and a recently detected Tn5044. Using recombinant plasmids containing fragments of Tn1721 or Tn5044 as targets in transposition experiments, we have demonstrated that Tn5053 displays striking insertional preference for the res regions of these transposons: more than 70% of Tn5053 insertion events occur in clusters inside the target res regions, while most remaining insertion events occur no further than 200 base pairs away from both sides of the res regions. We demonstrate that Tn5053 insertions (both into and outside a res region of the target plasmid) require the presence of a functional cognate resolvase gene either in cis or in trans. To our knowledge, this is the first case when a site-specific recombination system outside a transposon has been shown to be involved in transposition.     

Characterization of the staphylococcal beta-lactamase transposon Tn552.

The staphylococcal beta-lactamase transposon Tn552 is a member of a novel group of transposable elements. The organization of genes in Tn552 resembles that of members of the Tn21 sub-group of Tn3 family transposons, which transpose replicatively by cointegrate formation and resolution. Thus, a possible resolution site ('resL') and a resolvase gene (tnpR or 'binL') have been identified. However, consistent with the fact that Tn552 generates 6 bp (rather than 5 bp) flanking direct repeats of target DNA, neither the putative transposase protein, nor the terminal inverted repeats of Tn552 are homologous to those of Tn3 elements. Tn552, like phage Mu and retroelements, is defined by the terminal dinucleotides 5' TG .. CA 3'. A naturally occurring staphylococcal plasmid, pI9789, contains a Tn552-derived resolution system ('resR-binR') that acts as a 'hotspot' for Tn552 transposition; insertion creates a segment of DNA flanked by inversely repeated resolution sites, one (resR) on pI9789 and the other (resL) on Tn552. The putative Tn552 resolvase, the most closely related of known resolvases to the homologous DNA invertases, initially was identified as a DNA invertase ('Bin') as a result of its ability to mediate efficient inversion of this segment in vivo.     

Fine structure of transposition genes on Tn2603 and complementation of its tnpA and tnpR mutations by related transposons

The fine structure of the genes tnpA, tnpR and res of Tn2603 required for its own transposition, was determined. The order of the genes was tnpA-tnpR-res from the right end of the right hand side region in Tn2603, the tnpA and tnpR encoded gene products having molecular weights of 110,000 and 21,000, respectively. The 110,000 molecular weight polypeptides was absolutely required for replicon fusion as the first stage of transposition, and named transposase. On the other hand, the 21,000 molecular weight polypeptide was necessary for resolution of the cointegrate as the second stage of transposition, and named resolvase. We also examined the ability of various transposons, assumed to be closely related, to complement the tnpA and tnpR mutations of Tn2603. The results indicated that the mercury resistance transposon, Tn2613, and Tn501, can complement both genes, but TnAs and gamma delta cannot at all. Tn501 had much less efficiency of complementation for tnpA than Tn2613. We have also discovered that the transposition frequency of transposons in the tn2613 family systematically depend on their size of transposon.     

Evolutionary perspectives on multiresistance beta-lactamase transposons.

A series of intragenic DNA probes, encoding the major part of the transposase resolvase and inverted repeats of transposons Tn3, Tn21, and Tn2501, were used in hybridization assays for homologous DNA sequences in 18 transposons studied. The tnpA and tnpR probes detected extensive homology with Tn3-like and Tn21-like elements for 11 transposons. This high degree of homology was confirmed with the 38- and 48-base-pair inverted-repeat oligonucleotide probes of Tn3, Tn21, and Tn2501. The Southern-type gel hybridization experiments localized the tnpA-homologous sequences on the physical DNA maps constructed. The genetic and physical maps of the transposons were compared, as were their nucleic acid sequence homologies. These comparisons suggested a subfamily of mobile elements distinct from but related to the Tn21 group. Based on these results, an evolutionary model is proposed and a pedigree is presented for the genesis of multiresistance beta-lactamase transposons.     

Characteristics of Tn3611 and Tn3613 transposons discovered in the chromosome of the BS205 strain of Pseudomonas aeruginosa

The transposons Tn3611 (HgR, 9.0 kb) and Tn3613 (SmRCmRKmRSuRHgR, 24.0 kb) were discovered in the chromosome of Pseudomonas aeruginosa BS205. The physical and genetic maps of these transposons were constructed using restriction endonucleases EcoRI, BamHI, SalI, HindIII. Genes of the mer operon, tnpA and tnpR were localized in the Tn3611 transposon, the genes DHPS-II, aad, tnpA, tnpR being situated in the map of the Tn3613 transposon. It was established that the Tn3611 belongs to the class of Tn3-like transposons and the Tn3613 is a complex transposon flanked by inverted repeats 2.2 kb in size, the transposon comprising both Tn3611 and a migrating sequence.     

Definition of three resolvase binding sites at the res loci of Tn21 and Tn1721.

The dual functions of resolvase, site-specific recombination and the regulation of its own expression from tnpR, both require the interaction of this protein with the DNA sequence at res, but the specificity of this interaction differs between groups of Tn3-like elements. In this study, DNA fragments that contained res from Tn21 or Tn1721 were subjected to either cleavage by DNase I or methylation by dimethyl sulphate in the presence of the purified resolvase from Tn21 or Tn1721. These experiments showed that each resolvase bound to the same three sites (I, II and III) within res from Tn1721 and to an equivalent series of three sites on Tn21: the differences in the amino acid sequences of the two proteins did not affect their interaction with either DNA. The DNA sequences at each site had some similarities and, in conjunction with data from the related transposon Tn501, a consensus was established. However, the three sites are functionally distinct: site I (tnpR-distal) spans the recombination cross-over point and sites II and III (tnpR-proximal) overlap the promoter of tnpR. The binding sites on these transposons were compared with those in the gamma delta/Tn3 system: the similarities between the two groups of transposons revealed some general features of resolvase-DNA interactions while the differences in fine structure elucidated the specificity of each resolvase.     

Tn5037-a Tn21-like mercury transposon, detected in Thiobacillus ferrooxidans

The 6645-bp mercury resistance transposon of the chemolithotrophic bacterium Thiobacillus ferrooxidans was cloned and sequenced. This transposon, named Tn5037, belongs to the Tn21 branch of the Tn21 subgroup, many members of which have been isolated from clinical sources. Having the minimum set of the genes (merRTPA), the mercury resistance operon of Tn5037 is organized similarly to most of the Gram-negative bacteria mer operons and is closest to that of Thiobacillus 3.2. The operator-promoter region of the mer operon of Tn5037 also has the common (Tn21/Tn501-like) structure. However, its inverted, presumably MerR protein binding repeats in the operator/promoter element are two base pairs shorter than in Tn21/Tn501. In the merA region, this transposon shares 77.4, 79.1, 83.2 and 87.8% identical bases with Tn21, Tn501, T. ferrooxidance E-15, and Thiobacillus 3.2, respectively. No inducibility of the Tn5037 mer operon was detected in the in vivo experiments. The transposition system (terminal repeats plus gene tnpA) of Tn5037 was inactive in Escherichia coli K12, in contrast to its resolution system (res site plus gene tnpR). However, transposition of Tn5037 in this host was provided by the tnpA gene of Tn5036, a member of the Tn21 subgroup. Sequence analysis of the Tn5037 res site suggested its recombinant nature.     

Genetic and molecular characterization of Tn21, a multiple resistance transposon from R100.1.

Tge transposon Tn21 has been transposed from R100.1 to plasmid pACYC184 and, from the resulting recombinants, to plasmid R388. The sites of insertion and the orientation of the element in several pACYC184::Tn21 recombinants have been examined. Restriction enzyme analysis of these recombinants has resulted in a detailed map of Tn21; this is compared with the published maps of the relevant part of R100.1. Heteroduplex analysis has shown short inverted repeat sequences at the ends of the element. With various in vitro-generated deletion mutants of Tn21, the internal gene necessary for transposition (tnpA) was localized within the terminal 4.3 kilobases of the right-hand end of the element. Genetic analysis of transposition of Tn21 suggests that the process proceeds via cointegrates. Since the end products of transposition are simple recombinants of the element and the recipient replicon, Tn21 must contain a gene that codes for a resolvase type of activity (tnpR gene).     

DNA sequence analysis of the transposon Tn3: three genes and three sites involved in transposition of Tn3.

The complete nucleotide sequence of the transposon Tn3 and of 20 mutations which affect its transposition are reported. The mutations, generated in vitro by random insertion of synthetic restriction sites, proved to contain small duplications or deletions immediately adjacent to the new restriction site. By determining the phenotype and DNA sequence of these mutations we were able to generate an overlapping phenotypic and nucleotide map. This 4957 bp transposon encodes three polypeptides which account for all but 350 bp of its total coding capacity. These proteins are the transposase, a high molecular weight polypeptide (1015 amino acids) encoded by the tnpA gene; the Tn3-specific repressor, a low molecular weight polypeptide (185 amino acids) encoded by the tnpR gene; and the 286 amino acid beta-lactamase. The 38 bp inverted repeats flanking Tn3 appear to be absolutely required in cis for Tn3 to transpose. Genetic data suggest that Tn3 contains a third site (Gill et al., 1978), designated IRS (internal resolution site), whose absence results in the insertion of two complete copies of Tn3 as direct repeats into the recipient DNA. We suggest that these direct repeats of complete copies of Tn3 are intermediates in transposition, and that the IRS site is required for recombination and subsequent segregation of the direct repeats to leave a single copy of Tn3 (Gill et al., 1978). A 23 nucleotide sequence within the amino terminus of the transposase which shares strong sequence homology with the inverted repeat may be the internal resolution site.     

Geometry of site alignment during int family recombination: antiparallel synapsis by the Flp recombinase

The Flp site-specific recombinase functions in the copy number amplification of the yeast 2 microm plasmid. The recombination reaction is catalyzed by four monomers of Flp bound to two separate, but identical, recombination sites (FRT sites) and occurs in two sequential pairs of strand exchanges. The relative orientation of the two recombination sites during synapsis was examined. Topoisomerase relaxation and nick ligation were used to detect topological nodes introduced by the synapse prior to the chemical steps of recombination. A single negative supercoil was found to be trapped by Flp in substrates with inverted FRT sites whereas no trapped supercoils were observed with direct repeats. The topology of products resulting from Flp-mediated recombination adjacent to a well characterised synapse, that of Tn3 resolvase/res, was analyzed. The deletion and inversion reactions yielded the four noded catenane and the three noded knot, respectively, as the simplest and the most abundant products. The linking number change introduced by the Flp-mediated inversion reaction was determined to be +/-2. The most parsimonious explanation of these results is that Flp aligns its recombination sites with antiparallel geometry. The majority of synapses appear to occur without entrapment of additional random plectonemic DNA supercoils between the sites and no additional crossings are introduced as a result of the chemical steps of recombination.