QTL for percentage of carcass and carcass parts in a broiler x layer cross

An F₂ experimental population, developed from a broiler layer cross, was used in a genome scan of QTL for percentage of carcass, carcass parts, shank and head. Up to 649 F₂ chickens from four paternal half‐sib families were genotyped with 128 genetic markers covering 22 linkage groups. Total map length was 2630 cM, covering approximately 63% of the genome. QTL interval mapping using regression methods was applied to line‐cross and half‐sib models. Under the line‐cross model, 12 genome‐wide significant QTL and 17 suggestive linkages for percentages of carcass parts, shank and head were mapped to 13 linkage groups (GGA1, 2, 3, 4, 5, 7, 8, 9, 11, 12, 14, 18 and 27). Under the paternal half‐sib model, six genome‐wide significant QTL and 18 suggestive linkages for percentages of carcass parts, shank and head were detected on nine chicken linkage groups (GGA1, 2, 3, 4, 5, 12, 14, 15 and 27), seven of which seemed to corroborate positions revealed by the previous model. Overall, three novel QTL of importance to the broiler industry were mapped (one significant for shank% on GGA3 and two suggestive for carcass and breast percentages on GGA14 and drums and thighs percentage on GGA15). One novel QTL for wings% was mapped to GGA3, six novel QTL (GGA1, 3, 7, 8, 9 and 27) and suggestive linkages (GGA2, 4, and 5) were mapped for head%, and suggestive linkages were identified for back% on GGA2, 11 and 12. In addition, many of the QTL mapped in this study confirmed QTL previously reported in other populations.     

Genetic mapping of quantitative trait loci affecting carcass and meat quality traits in Beijing ducks (Anas platyrhynchos)

Quantitative trait loci (QTL) for carcass and meat quality traits were detected in a sample of 224 progeny from four males in line VI and 12 females in line V of Beijing ducks. These lines were selected for high body weight at 42 days of age (line VI) or high egg production at 360 days of age (line V). Traits were weights of the carcass, head, neck, shanks, wings, legs, thighs, breast, heart, liver, crop, gizzard, abdominal fat (AFW) and skin fat, as well as fat thickness in the tail, and pH value, shear force, drip loss (DL) (%) and cooking loss (CL) (%) of the breast. Using a half-sib analysis with a multiple QTL model, linkage between the carcass and meat quality traits and 95 microsatellite markers was investigated. Eight genome-wide significant QTL for weight of crop, skin fat, liver, neck, shanks, wings, DL were detected on linkage groups CAU4 and CAU6. One genome-wide suggestive QTL and one chromosome-wide significant QTL for weight of breast were found on CAU1 and CAU4 respectively. Fifteen chromosome-wide suggestive QTL influencing weight of AFW, breast, crop, heart, carcass, thighs, liver, shanks, gizzard, fat thickness in tail, DL (%) and CL (%) were mapped on CAU2, CAU4, CAU5, CAU6, CAU7, CAU10 and CAU13. In addition, two linked QTL for weight of liver and DL (%) were located on CAU2 and CAU7 respectively. The detection of QTL in ducks is a step towards identification of genes influencing these traits and their use for genetic improvement in this species.     

Results of a whole-genome quantitative trait locus scan for growth, carcass composition and meat quality in a porcine four-way cross

A whole-genome quantitative trait locus (QTL) scan for 31 phenotypes related to growth, carcass composition and meat quality was conducted using 1187 progeny of a commercial four-way cross. Animals were genotyped for 198 microsatellite markers that spanned the entire porcine genome. QTL analysis was conducted to extract information from paternal and maternal meioses separately using a rank-based nonparametric approach for half-sib designs. Nine QTL exceeded genome-wide significance: one QTL affecting growth (average daily gain on SSC1), two QTL influencing carcass composition (fatness on SSC3 and muscle mass on SSC15) and six QTL influencing meat quality (tenderness on SSC4 and SSC14; colour on SSC5, SSC6 and SSCX; and conductivity on SSC16). All but one of these coincided with previously reported QTL. In addition, we present evidence for 78 suggestive QTL with a combined false discovery rate of 40%.     

Genetic parameters for body weight, carcass chemical composition and yield in a broiler-layer cross developed for QTL mapping

The objective of this study was to estimate genetic and phenotypic correlations of body weight at 6 weeks of age (BW6), as well as final carcass yield, and moisture, protein, fat and ash contents, using data from 3,422 F2 chickens originated from reciprocal cross between a broiler and a layer line. Variance components were estimated by the REML method, using animal models for evaluating random additive genetic and fixed contemporary group (sex, hatch and genetic group) effects. The heritability estimates (h(2)) for BW6, carcass yield and percentage of carcass moisture were 0.31 ± 0.07, 0.20 ± 0.05 and 0.33 ± 0.07, respectively. The h(2) for the percentages of protein, fat and ash on a dry matter basis were 0.48 ± 0.09, 0.55 ± 0.10 and 0.36 ± 0.08, respectively. BW6 had a positive genetic correlation with fat percentage in the carcass, but a negative one with protein and ash contents. Carcass yield, thus, appears to have only low genetic association with carcass composition traits. The genetic correlations observed between traits, measured on a dry matter basis, indicated that selection for carcass protein content may favor higher ash content and a lower percentage of carcass fat.     

Genome-wide identification of quantitative trait loci for carcass composition and meat quality in a large-scale White Duroc × Chinese Erhualian resource population

Carcass and meat quality traits are economically important in pigs. In this study, 17 carcass composition traits and 23 meat quality traits were recorded in 1028 F₂ animals from a White Duroc × Erhualian resource population. All pigs in this experimental population were genotyped for 194 informative markers covering the entire porcine genome. Seventy-seven genome-wide significant quantitative trait loci (QTL) for carcass traits and 68 for meat quality were mapped to 34 genomic regions. These results not only confirmed many previously reported QTL but also revealed novel regions associated with the measured traits. For carcass traits, the most prominent QTL was identified for carcass length and head weight at 57 cM on SSC7, which explained up to 50% of the phenotypic variance and had a 95% confidence interval of only 3 cM. Moreover, QTL for kidney and spleen weight and lengths of cervical vertebrae were reported for the first time in pigs. For meat quality traits, two significant QTL on SSC5 and X were identified for both intramuscular fat content and marbling score in the longissimus muscle, while three significant QTL on SSC1 and SSC9 were found exclusively for IMF. Both LM and the semimembranous muscle showed common QTL for colour score on SSC4, 5, 7, 8, 13 and X and discordant QTL on other chromosomes. White Duroc alleles at a majority of QTL detected were favourable for carcass composition, while favourable QTL alleles for meat quality originated from both White Duroc and Erhualian.     

Identification of quantitative trait loci for growth and carcass composition in cattle

A genomic screening to detect quantitative trait loci (QTL) affecting growth, carcass composition and meat quality traits was pursued. Two hundred nineteen microsatellite markers were genotyped on 176 of 620 (28%) progeny from a Brahman x Angus sire mated to mostly MARC III dams. Selective genotyping, based on retail product yield (%) and fat yield (%), was used to select individuals to be genotyped. Traits included in the study were birth weight (kg), hot carcass weight (kg), retail product yield, fat yield, marbling score (400 = slight00 and 500 = small00), USDA yield grade, and estimated kidney, heart and pelvic fat (%). The QTL were classified as significant when the expected number of false positives (ENFP) was less than 0.05 (F-statistic greater than 17.3), and suggestive when the ENFP was <1 (F-statistic between 10.2 and 17.3). A significant QTL (F = 19; ENFP = 0.02) was detected for marbling score at centimorgan (cM) 54 on chromosome 2. Suggestive QTL were detected for fat yield at 50 cM, for retail product yield at 53 cM, and for USDA yield grade at 63 cM on chromosome 1, for marbling score at 56 cM, for retail product yield at 70 cM, and for estimated kidney, heart and pelvic fat at 79 cM on chromosome 3, for marbling score at 44 cM, for hot carcass weight at 49 cM, and for estimated kidney, heart and pelvic fat at 62 cM on chromosome 16, and for fat yield at 35 cM on chromosome 17. Two suggestive QTL for birth weight were identified, one at 12 cM on chromosome 20 and the other at 56 cM on chromosome 21. An additional suggestive QTL was detected for retail product yield, for fat yield, and for USDA yield grade at 26 cM on chromosome 26. Results presented here represent the initial search for quantitative trait loci in this family. Validation of detected QTL in other populations will be necessary.     

Quantitative trait loci associated with fatness in a broiler–layer cross

An F₂ population established by crossing a broiler male line and a layer line was used to map quantitative trait loci (QTL) affecting abdominal fat weight, abdominal fat percentage and serum cholesterol and triglyceride concentrations. Two genetic models, the line-cross and the half-sib, were applied in the QTL analysis, both using the regression interval method. Three significant QTL and four suggestive QTL were mapped in the line-cross analysis and four significant and four suggestive QTL were mapped in the half-sib analysis. A total of five QTL were mapped for abdominal fat weight, six for abdominal fat percentage and four for triglyceride concentration in both analyses. New QTL associated with serum triglyceride concentration were mapped on GGA5, GGA23 and GG27. QTL mapped between markers LEI0029 and ADL0371 on GGA3 for abdominal fat percentage and abdominal fat weight and a suggestive QTL on GGA12 for abdominal fat percentage showed significant parent-of-origin effects. Some QTL mapped here match QTL regions mapped in previous studies using different populations, suggesting good candidate regions for fine-mapping and candidate gene searches.     

Quantitative trait loci segregating in crosses between New Hampshire and White Leghorn chicken lines: II. Muscle weight and carcass composition

In order to identify genetic factors influencing muscle weight and carcass composition in chicken, a linkage analysis was performed with 278 F₂ males of reciprocal crosses between the extremely different inbred lines New Hampshire (NHI) and White Leghorn (WL77). The NHI line had been selected for high meat yield and the WL77 for low egg weight before inbreeding. Highly significant quantitative trait loci (QTL) controlling body weight and the weights of carcass, breast muscle, drumsticks–thighs and wings were identified on GGA4 between 151.5 and 160.5 cM and on GGA27 between 4 and 52 cM. These genomic regions explained 13.7–40.2% and 5.3–13.8% of the phenotypic F₂ variances of the corresponding traits respectively. Additional genome‐wide highly significant QTL for the weight of drumsticks–thighs were mapped on GGA1, 5 and 7. Moreover, significant QTL controlling body weight were found on GGA2 and 11. The data obtained in this study can be used for increasing the mapping resolution and subsequent gene targeting on GGA4 and 27 by combining data with other crosses where the same QTL were found.     

A genome scan reveals QTL for growth, fatness, leanness and meat quality in a Duroc-Pietrain resource population

We performed a genome-wide QTL scan for production traits in a line cross between Duroc and Pietrain breeds of pigs, which included 585 F(2) progeny produced from 31 full-sib families genotyped with 106 informative microsatellites. A linkage map covering all 18 autosomes and spanning 1987 Kosambi cM was constructed. Thirty-five phenotypic traits including body weight, growth, carcass composition and meat quality traits were analysed using least square regression interval mapping. Twenty-four QTL exceeded the genome-wide significance threshold, while 47 QTL reached the suggestive threshold. These QTL were located at 28 genomic regions on 16 autosomal chromosomes and QTL in 11 regions were significant at the genome-wide level. A QTL affecting pH value in loin was detected on SSC1 between marker-interval S0312-S0113 with strong statistical support (P < 3.0 x 10(-14)); this QTL was also associated with meat colour and conductivity. QTL for carcass composition and average daily gain was also found on SSC1, suggesting multiple QTL. Seventeen genomic segments had only a single QTL that reached at least suggestive significance. Forty QTL exhibited additive inheritance whereas 31 QTL showed (over-) dominance effects. Two QTL for trait backfat thickness were detected on SSC2; a significant paternal effect was found for a QTL in the IGF2 region while another QTL in the middle of SSC2 showed Mendelian expression.     

Identification of quantitative trait loci affecting shank length, body weight and carcass weight from the Japanese cockfighting chicken breed, Oh-Shamo (Japanese Large Game)

We performed a quantitative trait locus (QTL) analysis to map QTLs controlling shank length, body weight, and carcass weight in a resource family of 245 F(2) birds developed from a cross of the large-sized, native, Japanese cockfighting breed, Oh-Shamo (Japanese Large Game), and the White Leghorn breed of chickens. Interval mapping revealed three significant QTLs for shank length on chromosomes 1, 4 and 24 at the experiment-wise 5% level, and a suggestive shank length QTL on chromosome 27 at the experiment-wise 10% level. For body weight two QTLs, one significant and the other suggestive, were identified on chromosomes 4 and 24, respectively. As expected, QTLs for carcass weight, which was highly correlated with body weight (r = 0.95), were detected at the same chromosomal locations as the detected body weight QTLs. Interestingly, the chromosomal locations containing these body weight and carcass weight QTLs coincided with those of two of the four shank length QTLs detected. No QTL with an epistatic interaction effect was discovered for any trait. The total contribution of all detected QTLs to genetic variance was 98.4%, 27.0% and 25.9% for shank length, body weight and carcass weight, respectively, indicating that most shank length QTLs have been identified but many body weight and carcass weight QTLs have been overlooked by the present analysis because of a low coverage rate of the 88 microsatellite markers used here (approximately 46% of the whole genome).     

QTL alleles on chromosome 7 from fatty Meishan pigs reduce fat deposition

~~QTL alleles on chromosome 7 from fatty Meishan pigs reduce fat deposition@岳根华$Department of Animal Breeding and Biotechnology,University of Hohenheim!Garbenstr.17,70593 Stutt-gart,GermanyCurrent address:Institute of Molecular Agrobiology,national University of Singapore @Petra Beeckmann$Department of Animal Breeding and Biotechnology,University of Hohenheim!Garbenstr.17,70593 Stutt-gart,Germany @Gerhard Moser$Department of Animal Breeding and Biotechnology,University…     

QTL alleles on chromosome 7 from fatty Meishan pigs reduce fat deposition

For detecting QTL in the whole swine genome, 1068 pigs from three F₂ populations constructed by crossing European Wild boar and Pietrain (W×P), Meishan and Pietrain (M×P), and Wild Boar and Meishan (W × M) were genotyped for genetic markers evenly spaced at approximately 20 cM intervals. AQTL analysis was performed using a least-squares method. Here the results of the QTL analysis on the porcine chromosome 7 are presented. QTL for carcass composition (e.g. head weight, carcass length, backfat depth, abdominal fat and bacon meat) were mapped in the chromosomal region CYPA/CYPD-TNFB-S0102 in M×P and W×M, but not in W×P. The QTL explained 5.3%–27.2% of the F₂ phenotypic variance in the two F₂ populations. Most traits affected by the mapped QTL were related to carcass fatness. The mode of gene action of QTL was additive. Surprisingly, in contrast to the parental phenotype, the QTL alleles from fatty Meishan were associated with thinner backfat than Pietrain and Wild Boar alleles, suggesting that the genome of the fatty Meishan pig contains genes which can reduce fat content of carcass substantially.     

Genetic mapping of quantitative trait loci affecting susceptibility to Marek's disease virus induced tumors in F2 intercross chickens.

Marek''s disease (MD) is a lymphoproliferative disease caused by the MD virus (MDV), which costs the poultry industry nearly $1 billion annually. To identify quantitative trait loci (QTL) affecting MD susceptibility, the inbred lines 6(3) (MD resistant) and 7(2) (MD susceptible) were mated to create more than 300 F2 chickens. The F2 chickens were challenged with MDV JM strain, moderately virulent) at 1 wk of age and assessed for MD susceptibility. The QTL analysis was divided into three stages. In stage 1, 65 DNA markers selected from the chicken genetic maps were typed on the 40 most MD-susceptible and the 40 most MD-resistant F2 chickens, and 21 markers residing near suggestive QTL were revealed by analysis of variance (ANOVA). In stage 2, the suggestive markers plus available flanking markers were typed on 272 F2 chickens, and three suggestive QTL were identified by ANOVA. In stage 3, using the interval mapping program Map Manager and permutation tests, two significant and two suggestive MD QTL were identified on four chromosomal subregions. Three to five loci collected explained between 11 and 23% of the phenotypic MD variation, or 32-68% of the genetic variance. This study constitutes the first report in the domestic chicken on the mapping of non-major histocompatibility complex QTL affecting MD susceptibility.     

Detection of quantitative trait loci for carcass composition traits in pigs

A quantitative trait locus (QTL) analysis of carcass composition data from a three-generation experimental cross between Meishan (MS) and Large White (LW) pig breeds is presented. A total of 488 F2 males issued from six F1 boars and 23 F1 sows, the progeny of six LW boars and six MS sows, were slaughtered at approximately 80 kg live weight and were submitted to a standardised cutting of the carcass. Fifteen traits, i.e. dressing percentage, loin, ham, shoulder, belly, backfat, leaf fat, feet and head weights, two backfat thickness and one muscle depth measurements, ham + loin and back + leaf fat percentages and estimated carcass lean content were analysed. Animals were typed for a total of 137 markers covering the entire porcine genome. Analyses were performed using a line-cross (LC) regression method where founder lines were assumed to be fixed for different QTL alleles and a half/full sib (HFS) maximum likelihood method where allele substitution effects were estimated within each half-/full-sib family. Additional analyses were performed to search for multiple linked QTL and imprinting effects. Significant gene effects were evidenced for both leanness and fatness traits in the telomeric regions of SSC 1q and SSC 2p, on SSC 4, SSC 7 and SSC X. Additional significant QTL were identified for ham weight on SSC 5, for head weight on SSC 1 and SSC 7, for feet weight on SSC 7 and for dressing percentage on SSC X. LW alleles were associated with a higher lean content and a lower fat content of the carcass, except for the fatness trait on SSC 7. Suggestive evidence of linked QTL on SSC 7 and of imprinting effects on SSC 6, SSC 7, SSC 9 and SSC 17 were also obtained.     

Variant discovery in a QTL region on chromosome 3 associated with fatness in chickens

Abdominal fat content is an economically important trait in commercially bred chickens. Although many quantitative trait loci (QTL) related to fat deposition have been detected, the resolution for these regions is low and functional variants are still unknown. The current study was conducted aiming at increasing resolution for a region previously shown to have a QTL associated with fat deposition, to detect novel variants from this region and to annotate those variants to delineate potentially functional ones as candidates for future studies. To achieve this, 18 chickens from a parental generation used in a reciprocal cross between broiler and layer lines were sequenced using the Illumina next‐generation platform with an initial coverage of 18X/chicken. The discovery of genetic variants was performed in a QTL region located on chromosome 3 between microsatellite markers LEI0161 and ADL0371 (33 595 706–42 632 651 bp). A total of 136 054 unique SNPs and 15 496 unique INDELs were detected in this region, and after quality filtering, 123 985 SNPs and 11 298 INDELs were retained. Of these variants, 386 SNPs and 15 INDELs were located in coding regions of genes related to important metabolic pathways. Loss‐of‐function variants were identified in several genes, and six of those, namely LOC771163, EGLN1, GNPAT, FAM120B, THBS2 and GGPS1, were related to fat deposition. Therefore, these loss‐of‐function variants are candidate mutations for conducting further studies on this important trait in chickens.     

Effects of genomic selection for intramuscular fat content in breast muscle in Chinese local chickens

Improvements in living standards have resulted in consumers having higher expectations for chicken meat quality. This is particularly true in Asia, where there is high consumer preference for local breeds. Nothing is presently known about the effectiveness of using genomic selection (GS) strategies in chickens to genetically improve meat quality traits that cannot be measured in living potential parents. In this study, 724 Beijing‐You chickens were used as a training population; all were genotyped using Illumina 60K SNP chips, and intramuscular fat content in breast muscle (IMF_br) was measured. Birds in the GS line were selected based on genomic estimated breeding values, IMF_br being the sole trait. Genetic progress in one generation was compared to that from conventional family‐based selection, and both were evaluated against random‐bred controls. Results showed that relative to the random‐bred controls, IMF percentage was improved 9.62% using GS, comparable to the 10.38% improvement using family‐based selection. We quantified the effectiveness of GS when applied to a meat quality trait with low heritability in chickens. We plan to introduce custom SNP chips, appropriate for native chicken breeds in China, to assist in applying GS in local breeding and accelerate genetic gain.     

Segregation of QTL for production traits in commercial meat-type chickens

This study investigated whether quantitative trait loci (QTL) identified in experimental crosses of chickens provide a short cut to the identification of QTL in commercial populations. A commercial population of broilers was targeted for chromosomal regions in which QTL for traits associated with meat production have previously been detected in extreme crosses. A three-generation design, consisting of 15 grandsires, 608 half-sib hens and over 15 000 third-generation offspring, was implemented within the existing breeding scheme of a broiler breeding company. The first two generations were typed for 52 microsatellite markers spanning regions of nine chicken chromosomes and covering a total of 730 cM, approximately one-fifth of the chicken genome. Using half-sib analyses with a multiple QTL model, linkage was studied between these regions and 17 growth and carcass traits. Out of 153 trait x region comparisons, 53 QTL exceeded the threshold for genome-wide significance while an additional 23 QTL were significant at the nominal 1% level. Many of the QTL affect the carcass proportions and feed intake, for which there are few published studies. Given intensive selection for efficient growth in broilers for more than 50 generations it is surprising that many QTL affecting these traits are still segregating. Future fine-mapping efforts could elucidate whether ancestral mutations are still segregating as a result of pleiotropic effects on fitness traits or whether this variation is due to new mutations.     

Genome-wide mapping for fatty acid composition and melting point of fat in a purebred Duroc pig population

The fatty acid composition and melting point of fatty tissue are among the most important economic traits in pig breeding because of their influence on the eating quality of meat. Identifying the quantitative trait locus (QTL) of these traits may help reveal the genetic structure of fatty acid composition and the melting point of fatty tissue and improve meat-quality traits by marker-assisted selection. We conducted whole-genome QTL analysis for fatty acid composition and melting point of inner and outer subcutaneous fat and inter- and intramuscular fat in a purebred Duroc population. A total of 129 markers were genotyped and used for QTL analysis. For fatty acid compositions of inner and outer subcutaneous fat, three significant QTL and 17 suggestive QTL were detected on SSC2, 4, 6, 8, 9, 10, 11, 12, 14 and 18. For the melting point of inner and outer subcutaneous fat, two significant QTL were detected on the same region of SSC14. For fatty acid compositions of inter- and intramuscular fat, five significant QTL and 13 suggestive QTL were detected on SSC2, 4, 6, 8, 9, 10, 14 and 15. On SSC14, significant QTL for C18:0 and C18:1 of outer subcutaneous fat and intramuscular fat, and melting point of subcutaneous fat, which had high likelihood of odds (LOD) scores (2.67-5.78), were detected in the same region. This study determined QTL affecting fatty acid composition and melting point of different fat tissues in purebred Duroc pigs.     

Epistatic QTL pairs associated with meat quality and carcass composition traits in a porcine Duroc × Pietrain population

Background

Quantitative trait loci (QTL) analyses in pig have revealed numerous individual QTL affecting growth, carcass composition, reproduction and meat quality, indicating a complex genetic architecture. In general, statistical QTL models consider only additive and dominance effects and identification of epistatic effects in livestock is not yet widespread. The aim of this study was to identify and characterize epistatic effects between common and novel QTL regions for carcass composition and meat quality traits in pig.

Methods

Five hundred and eighty five F₂ pigs from a Duroc × Pietrain resource population were genotyped using 131 genetic markers (microsatellites and SNP) spread over the 18 pig autosomes. Phenotypic information for 26 carcass composition and meat quality traits was available for all F₂ animals. Linkage analysis was performed in a two-step procedure using a maximum likelihood approach implemented in the QxPak program.

Results

A number of interacting QTL was observed for different traits, leading to the identification of a variety of networks among chromosomal regions throughout the porcine genome. We distinguished 17 epistatic QTL pairs for carcass composition and 39 for meat quality traits. These interacting QTL pairs explained up to 8% of the phenotypic variance.

Conclusions

Our findings demonstrate the significance of epistasis in pigs. We have revealed evidence for epistatic relationships between different chromosomal regions, confirmed known QTL loci and connected regions reported in other studies. Considering interactions between loci allowed us to identify several novel QTL and trait-specific relationships of loci within and across chromosomes.