Stacking interactions of ApA analogues with modified backbones

CD spectra have been measured as a function of temperature for a number of ApA analogues with modified backbones. Oligonucleotides with these modified backbones are being used as antisense agents having potential as viral therapeutics. Results of these studies show that when a carbonyl is substituted for the phosphate to produce an uncharged backbone, the analogues that have either sugar or morpholino substitution do not stack. In contrast, when a morpholino group is substituted for the sugar and the phosphate is modified so as to be uncharged, there is strong base stacking. Stacking interactions in the phosphorus-linked morpholino analogues are at least as strong as those found in d (ApA). The stacking interactions in ApA are weak by comparison. Singular value decomposition demonstrates that the stacking is two state, and Taylor series decomposition yields a coefficient that measures base stacking interactions. The van't Hoff equation is applied to the base stacking coefficient from the Taylor series fitting to give thermodynamic parameters. © 1992 John Wiley & Sons, Inc.     

Negative electrospray ionization mass spectrometry of synthetic and chemically modified oligonucleotides.

We report here on the analysis of synthetic oligonucleotides by electrospray ionization mass spectrometry (ESI-MS). After intensive removal of salt ions (especially sodium cations), negative ion mass spectra, allowing mass measurement with an accuracy of 0.01%, were obtained on several oligonucleotides up to 80 nucleotides. In most cases, the resolution was sufficient to observe n-1 and n-2 forms due to internal deletions during automated synthesis, and to identify the missing nucleotides. A 132-mer, whose size is close to the limit of automated chemical synthesis, was also successfully mass measured. A quantitative study showed that ESI-MS can provide quantitative data on oligonucleotides of similar size and structure. The described methodology is used to characterize oligonucleotide analogues such as phosphorothioate oligonucleotides designed for antisense applications. Finally, analyses in the positive ion mode on a trimer TpTpT in the presence of different amine bases were performed and allowed a better understanding of the influence of these bases on the ions formation.     

Triplex formation of chemically modified homopyrimidine oligonucleotides: thermodynamic and kinetic studies.

We have investigated effects of chemical modifications of a third strand on the thermodynamic and kinetic properties of the triplex formation between a 23-bp duplex and each of four kinds of 15-mer chemically modified third strands using isothermal titration calorimetry and interaction analysis system. The chemical modifications of the third strand included one base modification, with replacement of thymine by uracil; two sugar moiety modifications, RNA and 2'-O-methyl-RNA; and one phosphate backbone modification, with replacement of phosphodiester by phosphorothioate backbone. The thermodynamic and kinetic parameters obtained were similar in magnitude at room temperature for the triplex formation with the base-modified and the sugar-modified third strands. By contrast, binding constant for the triplex formation with the third strand containing phosphorothioate backbone was much smaller by a factor of 10 than that for the other triplex formations. Kinetic analyses have also demonstrated that the third strand containing phosphorothioate backbone was much slower in the association step and much faster in the dissociation step than the other third strands, which resulted in the much smaller binding constant. The reason for the instability of the triplex with the third strand containing phosphorothioate backbone will be discussed. We conclude that, at least in the triplex formation with the chemically modified third strands studied in the present work, the modification of phosphate backbone of the third strand produces more significant effect on the triplex formation than the modifications of base and sugar moiety.     

化学修饰寡核苷酸在核酸配基扩增技术中的应用

核酸酸基扩增技术（SELEX)可从极大容量的随机寡核苷酸文库中筛选得到与靶分子高特异性和高亲和力结合的核酸配基。对寡核苷酸进行化学修饰,可以提高核酸配基的稳定性,增加其功能多样性及生物利用度。SELEX在基础研究、诊断和治疗试剂的研制及药物筛选等领域有广泛用途。     

Bioelectrocatalyzed signal amplification for affinity interactions at chemically modified electrodes

A comparative study was performed to evaluate the signal amplification strategies in electrochemical affinity sensing, which included the direct electron transfer and diffusible-group mediated electron transfer between label enzymes that were specifically bound to target proteins and chemically modified electrode surfaces. As a platform surface for affinity recognition reactions, a double functionalized poly(amido amine) dendrimer monolayer that was modified with ferrocene and biotin groups was constructed on a gold surface. With the chemically modified electrode, a model affinity sensing with avidin was investigated. The advantages of adopting the diffusible-group mediated signaling strategy were demonstrated in terms of signal sensitivity and stability.     

Stacking interactions in PUF-RNA complexes

Stacking interactions between amino acids and bases are common in RNA-protein interactions. Many proteins that regulate mRNAs interact with single-stranded RNA elements in the 3' UTR (3'-untranslated region) of their targets. PUF proteins are exemplary. Here we focus on complexes formed between a Caenorhabditis elegans PUF protein, FBF, and its cognate RNAs. Stacking interactions are particularly prominent and involve every RNA base in the recognition element. To assess the contribution of stacking interactions to formation of the RNA-protein complex, we combine in vivo selection experiments with site-directed mutagenesis, biochemistry, and structural analysis. Our results reveal that the identities of stacking amino acids in FBF affect both the affinity and specificity of the RNA-protein interaction. Substitutions in amino acid side chains can restrict or broaden RNA specificity. We conclude that the identities of stacking residues are important in achieving the natural specificities of PUF proteins. Similarly, in PUF proteins engineered to bind new RNA sequences, the identity of stacking residues may contribute to "target" versus "off-target" interactions, and thus be an important consideration in the design of proteins with new specificities.     

An automated algorithm for sequence confirmation of chemically modified oligonucleotides by tandem mass spectrometry

We have developed a tandem mass spectrometry (MS/MS) data analysis program for confirmation of sequence of chemically modified oligonucleotides. The method is based on the analysis of deconvoluted MS/MS data for fragment ions from three charge states and comparison of these data against a set of computer-generated masses from expected fragmentation patterns. The algorithm compares the experimental masses not only against the fragment set predicted for the expected sequence but also against a wider test set covering all next-neighbor position switches of the original sequence and all pairwise swaps of nucleosides, which in synthesis would result in molecules with masses within a preset mass tolerance. The algorithm is capable of identifying incorrect sequences that would not be distinguished by identity testing with electrospray ionization mass spectrometry. The method has been tested with permutations of the two 21-mer single strands of a chemically modified short interfering RNA containing 2′-O-methyl and phosphorothioate linkages. For both strands, challenge sequences were synthesized and tested with the premise that they were the original sequences. The algorithm correctly reported the locations of next-neighbor position switches and nucleoside swaps. The results confirm the approach as useful for MS/MS-based identity test methods for synthetic oligonucleotides.     

Trichloroacetaldehyde modified oligonucleotides

Some commercial batches of dichloroacetic acid (DCA) contain traces of chloral (trichloroacetaldehyde). Using such DCA to effect detritylation during solid-phase oligonucleotide synthesis results in the formation of a family of process impurities in which the atoms of chloral (Cl3CCHO) are incorporated between the 5'-oxygen and phosphorus atoms of an internucleotide linkage. The structure was elucidated by HPLC with UV and MS detection, digestion of the oligonucleotide, synthesis of model compounds, and 1H and 31P NMR spectroscopy. By understanding the chemistry behind its formation, we are now able to limit levels of this impurity in synthetic oligonucleotides by limiting chloral in DCA.     

Triplex-forming ability of modified oligonucleotides

We present our studies on the ability of several different nucleotide analogs as triplex-forming oligonucleotides. The modifications tested include 4'-C-hydroxymethyl, LNA, 2'-amino-LNA and N2'-functionalized 2'-amino-LNA. Triplexes containing monomers of N2'-glycyl-functionalized 2'-amino-LNA are particularly stable.     

Synthesis and properties of modified oligonucleotides.

Phosphorothioate oligonucleotide analogs conjugated to cholesteryl by a neutral, 6 atom linker are more effective inhibitors of HIV-1 in cell culture than the corresponding analogs conjugated via a phosphorothioate group. The antiviral activity correlates with the hydrophobic character of the oligonucleotide. Some new synthetic methodology is also discussed.     

Stacking and hydrogen bond interactions between adenine and gallic acid

We have performed DFT and DFT-SAPT calculations on dimers of gallic acid, the model system for plant polyphenols, and the DNA base adenine. These dimers were selected for this study as they exhibit simultaneously hydrogen bonds and stacking interactions and it allows to quantify the relative values of these interactions. We calculate the relationships between the stability of the complexes, the charge transfer between monomers and the properties of the intermolecular bonds including hydrogen bonds and other bonds that do not involve hydrogen atoms. DFT-SAPT calculations were also performed to obtain the participation of the different types of energy and so the resulting physical effects. The results show that the presence of hydrogen bonds is the main stabilizing factor for dimers: the higher number and strength, the lower the dimer energy. The contribution of stacking to the stabilization is related to the strength and number of bonds between non-hydrogen atoms and quantified by the contribution of the dispersion terms to the interaction energy. Dimers I and II are mainly stabilized due to hydrogen bonds whereas dimer III is mainly stabilized by stacking interactions.     

Induction by chemically modified actin derivatives of antibody specificity: A relation between modified sites and antibody interactions with monomeric and filamentous actins

A comparison of specific antibodies induced by unfolded actins modified either by oxidation or by arylation of lysine residues was reported. We have focused our work on binding properties with filamentous actin and located its preferential antigenic sites for the anti-arylated-actin antibodies in the C-part of the molecule. An interference of anti-oxidized actin antibodies upon actin polymerisation has also been reported.     

Quality of chemically modified hemp fibers

Hemp fibers are very interesting natural material for textile and technical applications now. Applying hemp fibers to the apparel sector requires improved quality fibers. In this paper, hemp fibers were modified with sodium hydroxide solutions (5% and 18% w/v), at room and boiling temperature, for different periods of time, and both under tension and slack, in order to partially extract noncellulosic substances, and separate the fiber bundles. The quality of hemp fibers was characterised by determining their chemical composition, fineness, mechanical and sorption properties. The modified hemp fibers were finer, with lower content of lignin, increased flexibility, and in some cases tensile properties were improved. An original method for evaluation of tensile properties of hemp fibers was developed.