Conformation of poly(sodium ethacrylate) in solution studied by small-angle X-ray scattering

The pH-induced conformational transition of poly(sodium ethacrylate) PNaEA in aqueous solution, which occurs between a compact form at low charge-density and an extended coil at high charge-density, was studied by small-angle X-ray scattering and the structure at an each conformational state was analyzed and compared with the corresponding one of poly(sodium methacrylate) PNaMA. The conformational transition for PNaEA induced a remarkable change in the scattering data plotted in the form of the Kratky plot. By comparing the scattering data with theoretical scattering functions, it was clarified that the structures of the compact form and the extended coil are well mimicked by a swollen gel having a network structure and by a wormlike chain, respectively. Although such a structure of the extended coil of PNaEA is similar to the corresponding one of PNaMA, the structure of the compact form of PNaEA is different from the corresponding one of PNaMA, which is still represented by a wormlike chain in a Theta medium.     

Novel preparation method for poly(L-lactide)-based block copolymers: extended chain crystallites as a solid-state macro-coinitiator

A novel synthetic method for poly(L-lactide) (PLLA)-based diblock copolymers was developed by the use of PLLA extended chain crystallites (or crystalline residues) as a solid-state macro-coinitiator. In this study, we showed one example, i.e., a synthesis of diblock copolymer composed of a crystalline PLLA chain and an amorphous poly(DL-lactide) chain by ring-opening polymerization of DL-lactide initiated with stannous octoate (i.e., tin(II) 2-ethylhexanoate) in the presence of PLLA extended chain crystallites. The PLLA extended chain crystallites were prepared by hydrolytic degradation of crystallized PLLA films at 97 degrees C for 70 h. The chains inside the extended chain crystallites are expected to be protected from transesterfication reaction. Gel permeation chromatography, polarimetry, 1H NMR spectroscopy, wide-angle X-ray scattering, and differential scanning calorimetry revealed that the diblock copolymer poly(L-lactide-block-DL-lactide) was successfully prepared without significant transesterification.     

Viscoelastic behavior of fractionated ovine submaxillary mucins.

Solution properties of fractionated ovine submaxillary mucin (OSM) and asialo OSM (aOSM) in aqueous guanidine hydrochloride have been investigated using light scattering and rheological methods. For the first time we present viscometric evidence in both dilute and concentrated solution that the molecular structure of OSM is that of a wormlike chain. The intrinsic viscosity shows molecular weight dependence consistent with the linear extended chain conformation observed by light scattering measurements. The viscoelastic behavior of the OSM fractions in aqueous guanidine hydrochloride was further examined above the overlap concentration as a function of molecular weight and temperature. Under these solvent conditions in which the role of nonbonding intermolecular interactions is minimized, OSM shows predominantly fluid like behavior. However, high molecular weight OSM shows evidence of the existence of an entanglement network at high concentration. The frequency-dependent shear storage and loss moduli at all concentrations and molecular weights can be scaled to yield a master curve by incorporating typical viscoelastic shift parameters. The entanglement molecular weight and concentration are consistent with literature data for extended, semiflexible wormlike chains. The behavior of aOSM is similar to that of intact OSM at comparable degrees of coil overlap, indicating that the terminal sialic acid residue on the carbohydrate side chain has no effect on the rheology of concentrated OSM solutions beyond that due to an increase in the hydrodynamic volume.     

Derivation of the small-angle x-ray scattering functions for local conformations of polypeptide chains in solution

The small-angle x-ray scattering (SAXS) functions are analytically derived for both the randomly coiled and helical local conformations of a polypeptide chain in solution. The resulting scattering functions for helices of various types are characterized by a maximum in the range of scattering-vector corresponding to Bragg spacings of 3-5 A, whereas the random-coil function has no maximum. This result is compatible with the extant SAXS data for partially neutralized poly(L-glutamic acid) and poly(L-lysine) in aqueous solutions. Comparison of the SAXS data with the calculated scattering functions shows that helical structures in both polypeptide chains are of the 3.6(13)-helix (alpha-helix) rather than 3.0(10)-type.     

Cylindrical poly(oligo-DNA)

Oligo-desoxyribonuleic acids (ODNs) having a sequence of 5'-TCC ATG ACG TTC-3' were modified at the 5' end by introduction of an amine group via a C6-amino linker. After subsequent reaction of the amine group with N-methacryloyloxysuccinimide, polymerizable ODNs were obtained. Free radical homopolymerization results in the formation of comb polymers, which possess an ODN side-chain at each repeating unit of the main chain. Mainly due to steric repulsion, the main chain has to adopt a semi-flexible wormlike shape instead of the otherwise preferred coiled structure. This leads to the formation of cylindrical poly(oligo-DNA) molecules. Characterization by static and dynamic light scattering of the poly(oligo-DNA) in aqueous solution gave a radius of gyration Rg,app = 67.8 nm, a hydrodynamic radius Rh,app = 44.6 nm, and a characteristic ratio of rho = Rg/Rh = 1.52, indicating the cylindrical shape in solution. In addition, the cylindrical poly(oligo-DNA) molecules were adsorbed onto mica and visualized by atomic force microscopy.     

Synthesis of well-defined amphiphilic block copolymers having phospholipid polymer sequences as a novel biocompatible polymer micelle reagent

To realize safer and effective drug administration, novel well-defined and biocompatible amphiphilic block copolymers containing phospholipid polymer sequences were synthesized. At first, the homopolymer of 2-methacryloyloxyethylphosphorylcholine (MPC) was synthesized in water by reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization. The "living" polymerization was confirmed by the fact that the number-average molecular weight increased linearly with monomer conversion while the molecular weight distribution remained narrow independent of the conversion. The poly(MPC) thus prepared is end-capped with a dithioester moiety. Using the dithioester-capped poly(MPC) as a macro chain transfer agent, AB diblock copolymers of MPC and n-butyl methacrylate (BMA) were synthesized. Associative properties of the amphiphilic block copolymer (pMPC(m)-BMA(n)) with varying poly(BMA) block lengths were investigated using NMR, fluorescence probe, static light scattering (SLS), and quasi-elastic light scattering (QELS) techniques. Proton NMR data in D2O indicated highly restricted motions of the n-butyl moieties, arising from hydrophobic associations of poly(BMA) blocks. Fluorescence spectra of N-phenyl-1-naphthylamine indicated that the probes were solubilized in the polymer micelles in water. The formation of polymer micelles comprising a core with poly(BMA) blocks and shell with hydrophilic poly(MPC) blocks was suggested by SLS and QELS data. The size and mass of the micelle increased with increasing poly(BMA) block length. With an expectation of a pharmaceutical application of pMPC(m)-BMA(n), solubilization of a poorly water-soluble anticancer agent, paclitaxel (PTX), was investigated. PTX dissolved well in aqueous solutions of pMPC(m)-BMA(n) as compared with pure water, implying that PTX is incorporated into the hydrophobic core of the polymer micelle. Since excellent biocompatible poly(MPC) sequences form an outer shell of the micelle, pMPC(m)-BMA(n) may find application as a promising reagent to make a good formulation with a hydrophobic drug.     

Synthesis and characterization of poly(ethylene oxide)-block-poly(methylidene malonate 2.1.2) block copolymers bearing a mannose group at the PEO chain end

A poly(ethylene oxide)-block-poly(methylidene malonate 2.1.2) block copolymer (PEO-b-PMM 2.1.2) bearing a mannose moiety at the poly(ethylene oxide) chain end was synthesized by sequential anionic polymerization of ethylene oxide (EO) and methylidene malonate 2.1.2 (MM 2.1.2), followed by a coupling reaction between its poly(ethylene oxide) amino- or aldehyde-end group and a sugar derivative. Different coupling procedures, either in organic media or in aqueous micellar solutions, were examined in order to optimize the poly(ethylene oxide) end-glycosylation yield. The micellar size of the functionalized block copolymers was determined by dynamic light scattering.     

Structure of branched poly-alpha-amino acids in dimethylformamide. II. Viscosity, sedimentation, and diffusion

The intrinsic viscosity, sedimentation and diffusion of a series of branched, multichain poly-α-amino acids having a poly(L -lysine) backbone and poly(γ-benzyl L -glutamate) and poly (β-benzyl L -aspartate) side chains was studied at room temperature in dimethylformamide. The molecules were found to be extremely compact structures in which the molecular backbone is either lying along the major axis in a slightly twisted configuration (the longer the side chain the smaller the twist) or is coiled up in the form of a disk with backbone and side chains coplanar. Heat treatment (to 70°C.) introduces only small changes in the hydrodynamic parameters showing that the heat-labile aggregates detected by light scattering are reversibly broken up during the hydrodynamic measurements. The above structural information concerns the initial metastable conformation of the molecules which is irreversibly destroyed by heat treatment.     

Resonance Raman spectroscopy of complexes of the helix destabilizing proteins GP32 and GP5 with poly(rA) and poly(dA)

The bacteriophage T4 helix destabilizing protein (hdp) gp32 and its complexes with poly(rA) and poly(dA) were studied with ultra-violet resonant Raman spectroscopy. The UV-resonant Raman (UV-RR) spectrum of the complex of gp5, the coat protein of bacteriophage M13, with poly(dA) was also measured and is compared with the spectrum of the gp 32/poly(dA) complex. The excitation wavelength was 245.1 nm. This is on the far UV-side of the first absorption bands of adenine and near a "window" in the protein absorption spectrum. The overlap of fluorescence due to chromophores present in the protein and resonance Raman scattering was prevented by this choice of wavelength. The spectra of the protein/polynucleotide complexes are compared with the native nucleotide spectra measured at varying temperatures. The hyperchromicity which is expected when a nucleotide changes from a stacked to an unstacked conformation was not observed for poly(rA), neither upon temperature increase nor on protein binding. In both cases poly(dA) revealed a clear hyperchromicity. This different behavior of poly(rA) and poly(dA) is probably a consequence of their different conformations. The contributions of the proteins to the spectra is weak except for two bands, at 1550 and 1610 cm-1 due to tryptophan (in case of gp32) and one band near 1610 cm-1 due to tyrosine and phenylalanine.     

Chain flexibility and hydrodynamics of the B and Z forms of poly(dG-dC).poly(dG-dC).

The solution properties of the B and Z forms of poly(dG-dC).poly(dG-dC) have been measured by static and dynamic laser light scattering. The radius of gyration, persistence length, translational and segmental diffusion coefficients, and the Rouse-Zimm parameters have been evaluated. The persistence length of the Z form determined at 3 M NaCl is about 200 nm compared to 84 and 61 nm respectively for the B forms of poly(dG-dC).poly(dG-dC), and calf thymus DNA, both determined at 0.1 M NaCl. The data on persistence length, diffusion coefficients and the Rouse-Zimm parameters indicate a large increase in the chain stiffness of Z DNA compared to the B form. These results are opposite to the ionic strength effects on random sequence native DNAs, for which the flexibility increases with ionic strength and levels off at about 1 M NaCl.     

Order parameters and areas in fluid-phase oriented lipid membranes using wide angle X-ray scattering

We used wide angle x-ray scattering (WAXS) from stacks of oriented lipid bilayers to measure chain orientational order parameters and lipid areas in model membranes consisting of mixtures of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)/cholesterol and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/cholesterol in fluid phases. The addition of 40% cholesterol to either DOPC or DPPC changes the WAXS pattern due to an increase in acyl chain orientational order, which is one of the main properties distinguishing the cholesterol-rich liquid-ordered (Lo) phase from the liquid-disordered (Ld) phase. In contrast, powder x-ray data from multilamellar vesicles does not yield information about orientational order, and the scattering from the Lo and Ld phases looks similar. An analytical model to describe the relationship between the chain orientational distribution and WAXS data was used to obtain an average orientational order parameter, S_x-ray. When 40% cholesterol is added to either DOPC or DPPC, S_x-ray more than doubles, consistent with previous NMR order parameter measurements. By combining information about the average chain orientation with the chain-chain correlation spacing, we extended a commonly used method for calculating areas for gel-phase lipids to fluid-phase lipids and obtained agreement to within 5% of literature values.     

Hydrolytic and enzymatic degradation of nanoparticles based on amphiphilic poly(gamma-glutamic acid)-graft-L-phenylalanine copolymers

Amphiphilic graft copolymers consisting of poly(gamma-glutamic acid) (gamma-PGA) as the hydrophilic backbone and L-phenylalanine ethylester (L-PAE) as the hydrophobic side chain were synthesized by grafting L-PAE to gamma-PGA. The nanoparticles were prepared by a precipitation method, and about 200 nm-sized nanoparticles were obtained due to their amphiphilic properties. The hydrolytic and enzymatic degradation of these gamma-PGA nanoparticles was studied by gel permeation chromatography (GPC), scanning electron microscopy (SEM), dynamic light scattering (DLS) and (1)H NMR measurements. The hydrolysis ratio of gamma-PGA and these hydrophobic derivatives was found to decrease upon increasing the hydrophobicity of the gamma-PGA derivates. The pH had an effect on the hydrolytic degradation of the polymer. The hydrolysis of the polymer could be accelerated by alkaline conditions. The degradation of the gamma-PGA backbone by gamma-glutamyl transpeptidase (gamma-GTP) resulted in a dramatic change in nanoparticle morphology. With increasing time, the gamma-PGA nanoparticles began to decrease in size and finally disappeared completely. Moreover, the gamma-PGA nanoparticles were degraded by four different enzymes (Pronase E, protease, cathepsin B and lipase) with different degradation patterns. The enzymatic degradation of the nanoparticles occurred via the hydrolysis of gamma-PGA as the main chain and L-PAE as the side chain. In the case of the enzymatic degradation of gamma-PGA nanoparticles with Pronase E, the size of the nanoparticles increased during the initial degradation stage and decreased gradually when the degradation time was extended. Nanoparticles composed of biodegradable amphiphilic gamma-PGA with reactive function groups can undergo further modification and are expected to have a variety of potential pharmaceutical and biomedical applications, such as drug and vaccine carriers.     

Small-angle neutron scattering by a strongly denatured protein: analysis using random polymer theory.

Small-angle neutron scattering profiles are presented from phosphoglycerate kinase, in the native form and strongly denatured in 4 M guanidinium chloride (GdnHCl) solution. The data are interpreted using a model in which the excess scattering density associated with the protein is represented as a finite freely jointed chain of spheres. The similarity of the model-derived scattering function to experiment increases asymptotically with the number of spheres. The improvement of the fit obtained with more than approximately 200 spheres (i.e., two residues per sphere) is insignificant. The effects of finite size of the scattering units and of scattering length variation along the polypeptide chain are examined. Improved agreement with experiment is obtained when these effects are taken into account. A method for rapid calculation of the scattering profile of a full, all-atom configuration is examined. It is found that a representation of the chain containing two scattering units per residue, placed at the backbone and side-chain scattering length centroids, reproduces the full, all-atom profile to within 2%.     

Mechanism of inhibition of deoxyribonucleic acid synthesis by 1-beta-D-arabinofuranosyladenosine triphosphate and its potentiation by 6-mercaptopurine ribonucleoside 5'-monophosphate

The mechanism of inhibition of DNA synthesis by 1-beta-D-arabinofuranosyl-ATP (ara-ATP) and the potentiation of this inhibition by 6-mercaptopurine ribonucleoside 5'-monophosphate (6-MPR-P) have been investigated with mammalian DNA polymerase delty by using poly(dA-dT) as the template. The inhibition of DNA synthesis by ara-ATP correlates with incorporation of ara-AMP into poly(dA-dT). Nearest-neighbor analysis indicates that ara-AMP does not act as an absolute chain terminator but rather that chains with 3'-terminal arabinosyl nucleotides are extended slowly. The inhibition of DNA synthesis by ara-ATP is markedly enhanced by the addition of the nucleotide derivative of 6-mercaptopurine, 6-mercaptopurine ribonucleoside 5'-monophosphate. The increased inhibition of DNA synthesis in the presence of 6-MPR-P is due to increased incorporation of ara-AMP. The mechanism by which 6-MPR-P increases the incorporation of ara-AMP is by selective inhibition of the 3' to 5' exonuclease activity of DNA polymerase, thereby preventing the removal of newly incorporated ara-AMP at 3' termini of DNA chains.     

Interaction of cationic bilayer fragments with a model oligonucleotide

The interaction between cationic bilayer fragments and a model oligonucleotide was investigated by differential scanning calorimetry, turbidimetry, determination of excimer to monomer ratio of 2-(10-(1-pyrene)-decanoyl)-phosphatidyl-choline in bilayer fragment dispersions and dynamic light scattering for sizing and zeta-potential analysis. Salt (Na?HPO?), mononucleotide (2'-deoxyadenosine-5'-monophosphate) or poly (dA) oligonucleotide (3'-AAA AAA AAA A-5') affected structure and stability of dioctadecyldimethylammonium bromide bilayer fragments. Oligonucleotide and salt increased bilayer packing due to bilayer fragment fusion. Mononucleotide did not reduce colloid stability or did not cause bilayer fragment fusion. Charge neutralization of bilayer fragments by poly (dA) at 1:10 poly (dA):dioctadecyldimethylammonium bromide molar ratio caused extensive aggregation, maximal size and zero of zeta-potential for the assemblies. Above charge neutralization, assemblies recovered colloid stability due to charge overcompensation. For bilayer fragments/poly (dA), the nonmonotonic behavior of colloid stability as a function of poly (dA) concentration was unique for the oligonucleotide and was not observed for Na?HPO? or 2'-deoxyadenosine-5'-monophosphate. For the first time, such interactions between cationic bilayer fragments and mono- or oligonucleotide were described in the literature. Bilayer fragments/oligonucleotide assemblies may find interesting applications in drug delivery.     

The effect of changes in salt concentration and pH on the interaction between glycosaminoglycans and cationic polypeptides.

Circular dichroism (CD) spectroscopy has been used to investigate the effects of changes in salt concentration and pH on the interactions between basic polypeptides and connective tissue glycosaminoglycans in dilute aqueous solution. The polypeptides undergo conformation-directing interactions in the presence of glycosaminoglycans, which are subject to transitions as the ionic strength and pH are varied. For poly(L -lysine), the conformational change due to interaction breaks down as the ionic strength (monovalent ions) is increased. Based on the ionic strength at which disruption occurs, the glycosaminoglycans can be placed in order of increasing strength of interaction: chondroitin 6-sulfate, hyaluronic acid, chondroitin 4-sulfate, heparin, and dermatan sulfate. Prior to the conformational transition, scattering effects are observed, indicating the development of larger aggregates. Each glycosaminoglycan induces α-helicity for poly(L -arginine), which does not break down as the ionic strength is increased, indicating a stronger interaction for this polypeptide. The pH-induced transitions are in the pH range 2.5–3.8 and are probably related to deionization of carboxyl groups. For poly(L -lysine) the conformational effect is disrupted at low pH. For poly(L -arginine), the transitions are not complete, but appear to correspond to an increase in scattering.     

The Fab and Fc fragments of IgA1 exhibit a different arrangement from that in IgG: a study by X-ray and neutron solution scattering and homology modelling

Human immunoglobulin A (IgA) is an abundant antibody that mediates immune protection at mucosal surfaces as well as in plasma. The IgA1 isotype contains two four-domain Fab fragments and a four-domain Fc fragment analogous to that in immunoglobulin G (IgG), linked by a glycosylated hinge region made up of 23 amino acid residues from each of the heavy chains. IgA1 also has two 18 residue tailpieces at the C terminus of each heavy chain in the Fc fragment. X-ray scattering using H2O buffers and neutron scattering using 100 % 2H2O buffers were performed on monomeric IgA1 and a recombinant IgA1 that lacks the tailpiece (PTerm455). The radii of gyration RG from Guinier analyses were similar at 6.11-6.20 nm for IgA1 and 5.84-6.16 nm for PTerm455, and their cross-sectional radii of gyration RXS were also similar. The similarity of the RG and RXS values suggests that the tailpiece of IgA1 is not extended outwards in solution. The IgA1 RG values are higher than those for IgG, and the distance distribution function P(r) showed two distinct peaks, whereas a single peak was observed for IgG. Both results show that the hinge of IgA1 results in an extended Fab and Fc arrangement that is different from that in IgG. Automated curve-fit searches constrained by homology models for the Fab and Fc fragments were used to model the experimental IgA1 scattering curves. A translational search to optimise the relative arrangement of the Fab and Fc fragments held in a fixed orientation resembling that in IgG was not successful in fitting the scattering data. A new molecular dynamics curve-fit search method generated IgA1 hinge structures to which the Fab and Fc fragments could be connected in any orientation. A search based on these identified a limited family of IgA1 structures that gave good curve fits to the experimental data. These contained extended hinges of length about 7 nm that positioned the Fab-to-Fab centre-to-centre separation 17 nm apart while keeping the corresponding Fab-to-Fc separation at 9 nm. The resulting extended T-shaped IgA1 structures are distinct from IgG structures previously determined by scattering and crystallography which have Fab-to-Fab and Fab-to-Fc centre-to-centre separations of 7-9 nm and 6-8 nm, respectively. It was concluded that the IgA1 hinge is structurally distinct from that in IgG, and this results in a markedly different antibody structure that may account for a unique immune role of monomeric IgA1 in plasma and mucosa.     

Effect of ribonuclease H from chick embryo on the covalent-linked poly(A)--poly(dA) complementary to poly(dT) template

In vitro poly(dA) synthesis on poly(dT) template can be initiated by poly(A) primer. Poly(A) chains are covalently extended by DNA polymerase. The reaction product consists of poly(dA) chain with poly(A) at their 5'-ends, hydrogen bonded to the template poly(dT). The primer poly(A) is linked to the product poly(dA) via a 3':5'-phosphodiester bond, and can be specifically removed by ribonuclease H from chick embryos, leaving a 5'-phosphate end of poly(dA). Poly- or oligoriboadenylate longer than the (pA)5 could serve as a priming activity to synthesize poly(A) covalently linked to poly(dA).