Two hybrid plasmids with D. melanogaster DNA sequences complementary to mRNA coding for the major heat shock protein.

The isolation and partial characterization of two cloned segments of Drosophila melanogaster DNA containing "heat shock" gene sequences is described. We have inserted sheared embryonic D. melanogaster DNA by the poly(dA-dt) connector method (Lobban and Kaiser, 1973) into the R1 restriction site of the ampicillin-resistant plasmid pSF2124 (So, Gill and Falkow, 1975). A collection of independent hybrid plasmids was screened by colony hybridization (Grunstein and Hogness, 1975) for sequences complementary to in vitro labeled polysomal poly(A)+ heat shock RNA. Two clones were identified which contain sequences complementary to a heat shock mRNA species that directs the in vitro synthesis of the 70,000 dalton heat-induced polypeptide. Both cloned segments hybridize in situ to the heat-induced puff sites located at 87A and 87C of the salivary gland polytene chromosomes.     

Physical map of two D. melanogaster DNA segments containing sequences coding for the 70,000 dalton heat shock protein.

The isolation of the two hybrid plasmids 56H8 and 132E3, which contain D. melanogaster (Dm) DNA sequences complementary to the mRNA coding for the 70,000 dalton heat shock protein, has been reported (Schedl et al., 1978). Here we compare the sequence arrangement in the two cloned Dm DNA segments by restriction, cross-hybridization and heteroduplex analysis. The results show that the two cloned DNA segments derive from nonoverlapping regions of the Dm genome; that they contain homologous regions present once in 56H8 and twice in 132E3; and that each homologous region is composed of three distinct contiguous sequence elements, x, y and z, which together define a 3 kb common unit. While the 2.5 kb z elements show a high degree of sequence homology in all three common units, the three x and y elements display an intriguing relationship. The localization of the mRNA coding sequences within each of these common units is presented in the accompanying paper (Artavanis-Tsakonas et al., 1979).     

Construction and properties of recombinant plasmids containing the rII genes of bacteriophage T4.

Summary The EcoRI digestion products of phage T4 DNA have been examined using a phage DNA transformation assay. A 2.6x10⁶ Dalton fragment was found to contain the rII genes. This fragment was purified and then treated with HindIII endonuclease. The cleavage products were ligated to the vector plasmid pBR313 and viable recombinant plasmids recovered. A genetic assay was employed to demonstrate that the recombinants contained T4 DNA and to localize on the phage genetic map the EcoRI and HindIII sites cleaved during the construction of the plasmids. Preliminary characterization suggests that a fragment covering the beginning of the rIIA gene possibly contains a promotor which is active in uninfected cells.Abbreviations used Ap ampicillin - Tc tetracycline - Mdal 10⁶ Daltons - bp base pairs     

Two genes for the major heat-shock protein of Drosophila melanogaster arranged as an inverted repeat.

The physical maps of three cloned D. melanogaster DNA fragments with genes for the 70,000 dalton heat-shock protein (hsp 70) are presented. Fragment 122 contains two genes in diverging orientation, forming an inverted repeat around a central spacer. The other two fragments, which are found as polymorphic variants in the fly population, have related structures; they differ by the deletion or the insertion of large DNA segments. The sequence homologies between 122 and a plasmid with two hsp 70 genes in tandem repetition was investigated by heteroduplex analysis. In addition to the basic gene units, the segments share other homologous sequence elements which are found in different combinations near the beginning of the genes.     

Transcriptional organization of the Drosophila melanogaster ribosomal RNA genes.

Five distinct DNA replicating intermediates have been separated from lysates of bacteriophage G4-infected cells pulse-labelled during the period of replicative form synthesis using propidium diiodide/caesium chloride gradients. These are a partially single-stranded theta structure that is labelled in both the viral and complementary DNA strands; partially single-stranded circles, some with an unfinished viral DNA strand (25%) and some with an unfinished complementary DNA strand (75%); replicative form II(RFII) and replicative form I(RFI) DNA labelled only in the complementary DNA strand. To explain the pulse-label data a model is proposed in which G4 replicative form replication takes place by a displacement mechanism in which synthesis of the new viral DNA strand displaces the old viral DNA strand as a single-stranded DNA loop (D-loop) and when the displacement reaches half way round the molecule (the origin of synthesis of the G4 viral and complementary DNA strands are on opposite sides of the genome, Martin &; Godson 1977) synthesis of the complementary DNA strand starts, but in the opposite direction. Strand separation of the parent helix runs ahead of DNA synthesis, releasing two partially single-stranded circles from the replicating structure which then complete their replication as free single-stranded DNA circles. No evidence was found to support a rolling circle displacement mechanism of G4 replicative form synthesis.     

Selection and some properties of recombinant clones of lambda bacteriophage containing genes of Drosophila melanogaster.

The lambdagt clones containing fragments of the Drosophila melanogaster genome were prepared and characterized by hybridization of their DNA with (I) lambdagt-cRNA; (2) lambdaC-cRNA; (3) Dm-cRNA; (4) the mRNA of D.melanogaster culture cells and (5) the stable cytoplasmic poly (A) RNA from the same source. The technique for a simple selection of hybrid clones is described. The hybridization with mRNA allows one to select the clones containing structural genes of D.melanogaster. It was found that in all cases when the clone contains the structural gene it also contains the reiterated base sequences of the D.melanogaster genome. Several clones containing D. melanogaster DNA fragments with a size of (2-4)x1O6 daltons hybridizing with a relatively large portion of mRNA were selected for further analysis.     

Gene A protein cleavage of recombinant plasmids containing the phi X174 replication origin

Synthetic oligonucleotides, DNA ligase and DNA polymerase were used to construct double-stranded DNA fragments homologous to the first 25, 27 or 30 b.p. of the origin of replication of bacteriophage phi X174 (nucleotides 4299-4328 of the phi X174 DNA sequence). The double-stranded DNA fragments were cloned into the unique SmaI or HindIII restriction sites in the kanamycin-resistance gene of pACYC177 (AmpR, KmR). Recombinant plasmids were picked up by colony hybridization. DNA sequencing showed that not only recombinant plasmids with the expected insert were formed, but also recombinant plasmids with a shorter insert. Recombinant plasmids with an insert homologous to the first 24, 25, 26, 27, 28 or all 30 b.p. of the phi X174 origin region were thus obtained. Supercoiled plasmids containing a sequence homologous to the first 27, 28 or 30 b.p. of the phi X174 origin region are nicked by the phi X174 gene A protein. However, the other supercoiled plasmids are not nicked by the phi X174 gene A protein. These results show that the first 27 b.p. of the phi X174 origin region are sufficient as well as required for the initiation step in phi X174 RF DNA replication, i.e. the cleavage by gene A protein.     

Deletion mapping of two D. melanogaster loci that code for the 70,000 dalton heat-induced protein.

Using deficiencies in D. melanogaster that lack either the 87A or 87C heat-induced puffs, we have shown that the 70,000 dalton heat-induced protein (hsp 70) is encoded at both these loci. Embryos deleted for one of the two loci retain the ability to make hsp 70 after heat shock, but deleting both loci eliminates synthesis of hsp 70. Thus both loci encode hsp 70 and can be active following heat shock. We have analyzed the proteins made by embryos lacking either 87A or 87C, and have compared the 87A- and 87C-coded hsp 70 by isoelectric focusing and tryptic peptide fingerprinting. The hsp 70 made by the two loci is very similar, although a variant tryptic peptide appears to be encoded only at 87C. Using deficiencies with slightly different breakpoints, we have mapped the 87A locus to band 87A7, the site of the 87A heat-induced puff. The 87C locus maps within 87C1.     

Isolation and characterization of cloned DNA sequences containing ribosomal protein genes of Drosophila melanogaster.

Ribosomal (r) proteins encoded by polyadenylated RNA were specifically precipitated in vitro from polysomes by using antibodies raised against characterized Drosophila melanogaster r proteins. The immuno-purified mRNA in the polysome complex was used to prepare cDNA with which to probe a D. melanogaster genomic library. Selected recombinant phages were used to hybrid select mRNAs, which were analyzed by in vitro translation. Three clones containing the genes for r proteins 7/8, S18, and L12 were positively identified by electrophoresis of the translation products in one-dimensional and two-dimensional polyacrylamide gels. Sequences encoding r proteins S18 and L12 were found to be present in the genome in single copies. In contrast, the polynucleotide containing the region encoding 7/8 may be repeated or may contain or be flanked by short repeated sequences. The sizes of mRNAs that hybridized to the recombinant clone containing 7/8 were significantly larger than would be expected from the molecular weight of protein 7/8, implying that there were unusually long 5' and 3' noncoding sequences. The mRNAs for r proteins S18 and L12 were however, only about 10% larger. In situ hybridizations to salivary gland polytene chromosomes, using the recombinant phage, revealed that the recombinant clone containing the gene for r protein 7/8 hybridized to 5D on the X chromosome; the recombinant clone containing the gene for S18 hybridized to 15B on the same chromosome, and the recombinant phage containing the gene for L12 hybridized to 62E on chromosome 3L. It is of interest that the genomic locations of all three r protein clones were within the chromosomal intervals known to contain the Minute mutations [M(1)0, M(1)30, and M(3)LS2]. Although each clone contained sequences specifying two to four proteins, none had more than one identifiable r protein gene, suggesting that different D. melanogaster r protein genes may not be closely linked.     

Chromatin structure of the histone genes of D. melanogaster

We have examined the chromatin structure of the histone gene repeat of D. melanogaster using an indirect end-labeling technique. Our results show that each DNA segment of the repeat is packaged into a precisely defined and characteristic structure, as follows: the nontranscribed spacers display a "normal" chromatin arrangement, with each nucleosome precisely positioned on the underlying DNA sequence; the 5' ends of all five histone genes are in an exposed configuration, highly sensitive to both micrococcal nuclease and DNAase I; and the genes have an "altered" chromatin structure, as indicated by the weak and irregularly spaced nuclease cuts. This well-defined chromatin arrangement is established early in development and is stably maintained throughout the remainder of the D. melanogaster life cycle.