共查询到20条相似文献，搜索用时 0 毫秒
1.
2.
Bottlenecks in the efficient conversion of xylose into cost-effective biofuels have limited the widespread use of plant lignocellulose as a renewable feedstock. The yeast Saccharomyces cerevisiae ferments glucose into ethanol with such high metabolic flux that it ferments high concentrations of glucose aerobically, a trait called the Crabtree/Warburg Effect. In contrast to glucose, most engineered S. cerevisiae strains do not ferment xylose at economically viable rates and yields, and they require respiration to achieve sufficient xylose metabolic flux and energy return for growth aerobically. Here, we evolved respiration-deficient S. cerevisiae strains that can grow on and ferment xylose to ethanol aerobically, a trait analogous to the Crabtree/Warburg Effect for glucose. Through genome sequence comparisons and directed engineering, we determined that duplications of genes encoding engineered xylose metabolism enzymes, as well as TKL1, a gene encoding a transketolase in the pentose phosphate pathway, were the causative genetic changes for the evolved phenotype. Reengineered duplications of these enzymes, in combination with deletion mutations in HOG1, ISU1, GRE3, and IRA2, increased the rates of aerobic and anaerobic xylose fermentation. Importantly, we found that these genetic modifications function in another genetic background and increase the rate and yield of xylose-to-ethanol conversion in industrially relevant switchgrass hydrolysate, indicating that these specific genetic modifications may enable the sustainable production of industrial biofuels from yeast. We propose a model for how key regulatory mutations prime yeast for aerobic xylose fermentation by lowering the threshold for overflow metabolism, allowing mutations to increase xylose flux and to redirect it into fermentation products. 相似文献
3.
Crude glycerol, generated as waste by-product in biodiesel production process, has been considered as an important carbon source for converting to value-added bioproducts recently. Free fatty acids (FFAs) can be used as precursors for the production of biofuels or biochemicals. Microbial biosynthesis of FFAs can be achieved by introducing an acyl–acyl carrier protein thioesterase into Escherichia coli. In this study, the effect of metabolic manipulation of FFAs synthesis cycle, host genetic background and cofactor engineering on FFAs production using glycerol as feed stocks was investigated. The highest concentration of FFAs produced by the engineered stain reached 4.82 g/L with the yield of 29.55% (g FFAs/g glycerol), about 83% of the maximum theoretical pathway value by the type II fatty acid synthesis pathway. In addition, crude glycerol from biodiesel plant was also used as feedstock in this study. The FFA production was 3.53 g/L with a yield of 24.13%. The yield dropped slightly when crude glycerol was used as a carbon source instead of pure glycerol, while it still can reach about 68% of the maximum theoretical pathway yield. 相似文献
4.
Acetyl-coenzyme A (AcCoA) is a metabolic hub in virtually all living cells, serving as both a key precursor of essential biomass components and a metabolic sink for catabolic pathways for a large variety of substrates. Owing to this dual role, tight growth-production coupling schemes can be implemented around the AcCoA node. Building on this concept, a synthetic C2 auxotrophy was implemented in the platform bacterium Pseudomonas putida through an in silico-informed engineering approach. A growth-coupling strategy, driven by AcCoA demand, allowed for direct selection of an alternative sugar assimilation route—the phosphoketolase (PKT) shunt from bifidobacteria. Adaptive laboratory evolution forced the synthetic P. putida auxotroph to rewire its metabolic network to restore C2 prototrophy via the PKT shunt. Large-scale structural chromosome rearrangements were identified as possible mechanisms for adjusting the network-wide proteome profile, resulting in improved PKT-dependent growth phenotypes. 13C-based metabolic flux analysis revealed an even split between the native Entner-Doudoroff pathway and the synthetic PKT bypass for glucose processing, leading to enhanced carbon conservation. These results demonstrate that the P. putida metabolism can be radically rewired to incorporate a synthetic C2 metabolism, creating novel network connectivities and highlighting the importance of unconventional engineering strategies to support efficient microbial production. 相似文献
5.
3-Hydroxypropionic acid (3-HP) is a promising platform chemical which can be used for the production of various value-added chemicals. In this study,Corynebacterium glutamicum was metabolically engineered to efficiently produce 3-HP from glucose and xylose via the glycerol pathway. A functional 3-HP synthesis pathway was engineered through a combination of genes involved in glycerol synthesis (fusion of gpd and gpp from Saccharomyces cerevisiae) and 3-HP production (pduCDEGH from Klebsiella pneumoniae and aldehyde dehydrogenases from various resources). High 3-HP yield was achieved by screening of active aldehyde dehydrogenases and by minimizing byproduct synthesis (gapAA1GΔldhAΔpta-ackAΔpoxBΔglpK). Substitution of phosphoenolpyruvate-dependent glucose uptake system (PTS) by inositol permeases (iolT1) and glucokinase (glk) further increased 3-HP production to 38.6 g/L, with the yield of 0.48 g/g glucose. To broaden its substrate spectrum, the engineered strain was modified to incorporate the pentose transport gene araE and xylose catabolic gene xylAB, allowing for the simultaneous utilization of glucose and xylose. Combination of these genetic manipulations resulted in an engineered C. glutamicum strain capable of producing 62.6 g/L 3-HP at a yield of 0.51 g/g glucose in fed-batch fermentation. To the best of our knowledge, this is the highest titer and yield of 3-HP from sugar. This is also the first report for the production of 3-HP from xylose, opening the way toward 3-HP production from abundant lignocellulosic feedstocks. 相似文献
6.
Ethylene is a small hydrocarbon gas widely used in the chemical industry. Annual worldwide production currently exceeds 150 million tons, producing considerable amounts of CO2 contributing to climate change. The need for a sustainable alternative is therefore imperative. Ethylene is natively produced by several different microorganisms, including Pseudomonas syringae pv. phaseolicola via a process catalyzed by the ethylene-forming enzyme (EFE), subsequent heterologous expression of EFE has led to ethylene production in non-native bacterial hosts including Escherichia coli and cyanobacteria. However, solubility of EFE and substrate availability remain rate-limiting steps in biological ethylene production. We employed a combination of genome-scale metabolic modelling, continuous fermentation, and protein evolution to enable the accelerated development of a high efficiency ethylene producing E. coli strain, yielding a 49-fold increase in production, the most significant improvement reported to date. Furthermore, we have clearly demonstrated that this increased yield resulted from metabolic adaptations that were uniquely linked to EFE (wild type versus mutant). Our findings provide a novel solution to deregulate metabolic bottlenecks in key pathways, which can be readily applied to address other engineering challenges. 相似文献
7.
Tolerance of yeast to acid stress is important for many industrial processes including organic acid production. Therefore, elucidating the molecular basis of long term adaptation to acidic environments will be beneficial for engineering production strains to thrive under such harsh conditions. Previous studies using gene expression analysis have suggested that both organic and inorganic acids display similar responses during short term exposure to acidic conditions. However, biological mechanisms that will lead to long term adaptation of yeast to acidic conditions remains unknown and whether these mechanisms will be similar for tolerance to both organic and inorganic acids is yet to be explored. We therefore evolved Saccharomyces cerevisiae to acquire tolerance to HCl (inorganic acid) and to 0.3 M L-lactic acid (organic acid) at pH 2.8 and then isolated several low pH tolerant strains. Whole genome sequencing and RNA-seq analysis of the evolved strains revealed different sets of genome alterations suggesting a divergence in adaptation to these two acids. An altered sterol composition and impaired iron uptake contributed to HCl tolerance whereas the formation of a multicellular morphology and rapid lactate degradation was crucial for tolerance to high concentrations of lactic acid. Our findings highlight the contribution of both the selection pressure and nature of the acid as a driver for directing the evolutionary path towards tolerance to low pH. The choice of carbon source was also an important factor in the evolutionary process since cells evolved on two different carbon sources (raffinose and glucose) generated a different set of mutations in response to the presence of lactic acid. Therefore, different strategies are required for a rational design of low pH tolerant strains depending on the acid of interest. 相似文献
8.
Saccharomyces cerevisiae, Baker's yeast, is the industrial workhorse for producing ethanol and the subject of substantial metabolic engineering research in both industry and academia. S. cerevisiae has been used to demonstrate production of a wide range of chemical products from glucose. However, in many cases, the demonstrations report titers and yields that fall below thresholds for industrial feasibility. Ethanol synthesis is a central part of S. cerevisiae metabolism, and redirecting flux to other products remains a barrier to industrialize strains for producing other molecules. Removing ethanol producing pathways leads to poor fitness, such as impaired growth on glucose. Here, we review metabolic engineering efforts aimed at restoring growth in non-ethanol producing strains with emphasis on relieving glucose repression associated with the Crabtree effect and rewiring metabolism to provide access to critical cellular building blocks. Substantial progress has been made in the past decade, but many opportunities for improvement remain. 相似文献
9.
甘油对利福霉素SV生物合成的影响 总被引：1，自引：0，他引：1
利福霉素SV脂肪链桥部分的合成是以乙酸单位（由丙二酰CoA提供）和丙酸单位（由甲基丙二酰CoA提供）为延伸单元经过缩合、环化和后修饰而形成的,一些短链碳前体对二碳或三碳延伸单位的合成具有调节作用。研究发现添加一定量的甘油对利福霉素SV的生成具有明显的促进作用,其最适添加量为3％,添加时间以72h为宜,并且分批补加效果更好,最高提高效价21％以上。有机酸分析结果显示,甘油的加入导致乙酸和琥珀酸在胞外积累的增加,促进了EMP和TCA代谢途径,有利于利福霉素SV合成前体的积累。 相似文献
10.
4-Hydroxyphenylacetic acid (4HPAA) is an important building block for synthesizing drugs, agrochemicals, and biochemicals, and requires sustainable production to meet increasing demand. Here, we use a 4HPAA biosensor to overcome the difficulty of conventional library screening in identification of preferred mutants. Strains with higher 4HPAA production and tolerance are successfully obtained by atmospheric and room temperature plasma (ARTP) mutagenesis coupled with adaptive laboratory evolution using this biosensor. Genome shuffling integrates preferred properties in the strain GS-2-4, which produces 25.42 g/L 4HPAA. Chromosomal mutations of the strain GS-2-4 are identified by whole genome sequencing. Through comprehensive analysis and experimental validation, important genes, pathways and regulations are revealed. The best gene combination in inverse engineering, acrD-aroG, increases 4HPAA production of strain GS-2-4 by 37% further. These results emphasize precursor supply and stress resistance are keys to efficient 4HPAA biosynthesis. Our work shows the power of biosensor-assisted screening of mutants from libraries. The methods developed here can be easily adapted to construct cell factories for the production of other aromatic chemicals. Our work also provides many valuable target genes to build cell factories for efficient 4HPAA production in the future. 相似文献
11.
Guanglu Wang Qian Li Zhan Zhang Xianzhong Yin Bingyang Wang Xuepeng Yang 《Journal of industrial microbiology & biotechnology》2022,50(1)
Adaptive laboratory evolution (ALE) is a technique for the selection of strains with better phenotypes by long-term culture under a specific selection pressure or growth environment. Because ALE does not require detailed knowledge of a variety of complex and interactive metabolic networks, and only needs to simulate natural environmental conditions in the laboratory to design a selection pressure, it has the advantages of broad adaptability, strong practicability, and more convenient transformation of strains. In addition, ALE provides a powerful method for studying the evolutionary forces that change the phenotype, performance, and stability of strains, resulting in more productive industrial strains with beneficial mutations. In recent years, ALE has been widely used in the activation of specific microbial metabolic pathways and phenotypic optimization, the efficient utilization of specific substrates, the optimization of tolerance to toxic substance, and the biosynthesis of target products, which is more conducive to the production of industrial strains with excellent phenotypic characteristics. In this paper, typical examples of ALE applications in the development of industrial strains and the research progress of this technology are reviewed, followed by a discussion of its development prospects. 相似文献
12.
Erythritol (1,2,3,4-butanetetrol) is a four-carbon sugar alcohol with sweetening properties that is used by the agrofood industry as a food additive. In this study, we demonstrated that metabolic engineering can be used to improve the production of erythritol from glycerol in the yeast Yarrowia lipolytica. The best results were obtained using a mutant that overexpressed GUT1 and TKL1, which encode a glycerol kinase and a transketolase, respectively, and in which EYK1, which encodes erythrulose kinase, was disrupted; the latter enzyme is involved in an early step of erythritol catabolism. In this strain, erythritol productivity was 75% higher than in the wild type; furthermore, the culturing time needed to achieve maximum concentration was reduced by 40%. An additional advantage is that the strain was unable to consume the erythritol it had created, further increasing the process's efficiency. The erythritol productivity values we obtained here are among the highest reported thus far. 相似文献
13.
Biologically produced 3-hydroxypropionic acid (3HP) is a potential source for sustainable acrylates and can also find direct use as monomer in the production of biodegradable polymers. For industrial-scale production there is a need for robust cell factories tolerant to high concentration of 3HP, preferably at low pH. Through adaptive laboratory evolution we selected S. cerevisiae strains with improved tolerance to 3HP at pH 3.5. Genome sequencing followed by functional analysis identified the causal mutation in SFA1 gene encoding S-(hydroxymethyl)glutathione dehydrogenase. Based on our findings, we propose that 3HP toxicity is mediated by 3-hydroxypropionic aldehyde (reuterin) and that glutathione-dependent reactions are used for reuterin detoxification. The identified molecular response to 3HP and reuterin may well be a general mechanism for handling resistance to organic acid and aldehydes by living cells. 相似文献
14.
15.
奎尼酸生物合成的代谢工程 总被引：1，自引：1，他引：1
奎尼酸及其衍生物氢醌和苯醌等是一类重要的化工原料,可作为一些化学合成制剂和药物中间原料,且在食品和化学工业中有着广泛的应用。目前奎尼酸的制备方法有植物提取法、化学合成法、酶工程法和微生物发酵法,其中微生物发酵法是近年发展起来的一种十分经济有效的方法。在介绍奎尼酸的制备方法的基础上重点综述了应用代谢工程在生物合成奎尼酸基因工程菌的改造中的研究进展,其中涉及奎尼酸生物合成途径中相关基因及其酶的调控、中心代谢途径的改造和修饰等,并探讨了将来的发展前景。 相似文献
16.
Metabolic engineering has emerged as a powerful tool for bioproduction of both fine and bulk chemicals. The natural coordination among different metabolic pathways contributes to the complexity of metabolic modification, which hampers the development of biorefineries. Herein, the coordination between the oxidative and reductive branches of glycerol metabolism was rearranged in Klebsiella oxytoca to improve the 1,3-propanediol production. After deliberating on the product value, carbon conservation, redox balance, biological compatibility and downstream processing, the lactate-producing pathway was chosen for coupling with the 1,3-propanediol-producing pathway. Then, the other pathways of 2,3-butanediol, ethanol, acetate, and succinate were blocked in sequence, leading to improved d-lactate biosynthesis, which as return drove the 1,3-propanediol production. Meanwhile, efficient co-production of 1,3-propanediol and l-lactate was also achieved by replacing ldhD with ldhL from Bacillus coagulans. The engineered strains PDL-5 and PLL co-produced over 70 g/L 1,3-propanediol and over 100 g/L optically pure d-lactate and l-lactate, respectively, with high conversion yields of over 0.95 mol/mol from glycerol. 相似文献
17.
Cellular systems can be engineered into factories that produce high-value chemicals from renewable feedstock. Such an approach requires an expanded toolbox for metabolic engineering. Recently, protein engineering and directed evolution strategies have started to play a growing and critical role within metabolic engineering. This review focuses on the various ways in which directed evolution can be applied in conjunction with metabolic engineering to improve product yields. Specifically, we discuss the application of directed evolution on both catalytic and non-catalytic traits of enzymes, on regulatory elements, and on whole genomes in a metabolic engineering context. We demonstrate how the goals of metabolic pathway engineering can be achieved in part through evolving cellular parts as opposed to traditional approaches that rely on gene overexpression and deletion. Finally, we discuss the current limitations in screening technology that hinder the full implementation of a metabolic pathway-directed evolution approach. 相似文献
18.
甘油歧化生产1,3-丙二醇过程的代谢和基因调控机理研究进展 总被引：13，自引：1，他引：13
用生物转化法将可再生资源(如淀粉、纤维素等)转化为重要的化工原料是目前生物技术领域的一个重要课题。本文以甘油生物转化为1,3丙二醇过程为考察对象,系统综述了该过程代谢和基因调控的研究现状,并对今后的研究提出了一些建议。 相似文献
19.
Nevoigt E Pilger R Mast-Gerlach E Schmidt U Freihammer S Eschenbrenner M Garbe L Stahl U 《FEMS yeast research》2002,2(2):225-232
The GPD1 gene encoding the glycerol-3-phosphate dehydrogenase was overexpressed in an industrial lager brewing yeast (Saccharomyces cerevisiae ssp. carlsbergensis) to reduce the content of ethanol in beer. The amount of glycerol produced by the GPD1-overexpressing yeast in fermentation experiments simulating brewing conditions was increased 5.6 times and ethanol was decreased by 18% when compared to the wild-type. Overexpression of GPD1 does not affect the consumption of wort sugars. Only minor changes in the concentration of higher alcohols, esters and fatty acids could be observed in beer produced by the GPD1-overexpressing brewing yeast. However, the concentrations of several other by-products, particularly acetoin, diacetyl and acetaldehyde, were considerably increased. 相似文献
20.
Large amounts of crude glycerol produced in the biodiesel industry can be used as a low-cost renewable feedstock to produce chemicals and fuels. Compared to sugars (sucrose, glucose, xylose, etc.), glycerol has a lower reducing level, which is of benefit to the production of reduced chemicals. In this work, glycerol as the sole carbon source in propionic acid fermentation by metabolically engineered Propionibacterium acidipropionici (ACK-Tet) was studied. It was found that the adapted ACK-Tet mutant could use glycerol for its growth and produced propionic acid at a high yield of 0.54–0.71 g/g, which was much higher than that from glucose (0.35 g/g). In addition, the production of acetic acid in glycerol fermentation was much less than that from glucose. Thus, glycerol fermentation produced a high purity propionic acid with a high propionic acid to acetic acid ratio of 22.4 (vs. 5 for glucose fermentation), facilitating the recovery and purification of propionic acid from the fermentation broth. The highest propionic acid concentration obtained from glycerol fermentation was 106 g/L, which was 2.5 times of the highest concentration (42 g/L) previously reported in the literature. 相似文献