Use of a chemically modified T7 DNA polymerase for manual and automated sequencing of supercoiled DNA

Procedures are presented for reliable and accurate nucleotide sequence analysis using as template supercoiled DNA prepared by a modified rapid boiling minipreparation protocol. This method yields DNA templates suitable for sequencing within 1 h of bacterial harvest. We describe optimal reaction conditions for supercoiled miniprep DNA sequencing using a modified T7 DNA polymerase (Sequenase) in dideoxynucleotide chain termination reactions. We demonstrate that under these conditions, the sequencing data obtained with miniprep DNA is indistinguishable from that obtained with CsCl purified supercoiled DNA or from that obtained using single stranded DNA templates. We further show that the supercoiled DNA sequencing reactions can be analyzed on a commercially available automated DNA sequencing system that detects 32P labeled DNA during its electrophoretic separation. Taken together, these developments represent a significant improvement in the process of nucleotide sequence analysis.     

Optimal conditions and specific characteristics of Vent exo- DNA polymerase in ligation-mediated polymerase chain reaction protocols.

An optimized procedure for the ligation-mediated polymerase chain reaction (PCR) technique using Thermococcus litoralis exo- DNA polymerase (Vent exo-) was developed. The optimal dosage of Vent exo- at the primer extension and PCR amplification steps as well as the optimal DNA quantity to use were established. We showed that Vent exo- can efficiently create the blunt-ended termini required for subsequent linker ligation. Vent exo- proves to be more efficient than Pyrococcus furiosus exo- (Pfu exo-) for this task. Vent exo- resolves highly GC-rich sequence substantially better than Thermus aquaticus DNA polymerase (Taq) and with a similar efficiency as Pfu exo-. The DNA/DNA polymerase activity ratio is significantly higher for Vent exo- than for Pfu exo-, which is reflected by the sensibility of Vent exo- in efficiently amplifying genomic DNA. Furthermore, the range of efficiency of Vent exo- demonstrates the importance of conducting evaluative testing to identify the optimal dosage of use of this polymerase to obtain successful PCR amplification. Optimal MgSO4 concentrations to use with Vent exo- were established. Our results show that Vent exo- DNA polymerase produces bands of uniform and strong intensity and can efficiently be used for the analysis of DNA in living cells by ligation-mediated PCR.     

T7 DNA polymerase in automated dideoxy sequencing.

T7 DNA polymerase with chemically inactivated 3'-5' exo-nuclease activity, as well as unmodified T7 DNA polymerase, were used for sequencing by the dideoxy method in an automated system with fluorescence labelled primer and on-line detection of laser-excited reaction products. An analysis of signal intensity variations in the C track revealed that low C signals were usually preceded by a T in the sequence. This effect was modified by surrounding nucleotides. Signal intensities were more uniform with T7 polymerase than with the Klenow fragment of DNA polymerase I. Some sequences ambiguous with the Klenow enzyme could easily be evaluated with the T7 enzyme. One sequence could only be read by the unmodified T7 polymerase, while both the Klenow fragment and the chemically modified T7 enzyme gave uninterpretable data.     

Specific-primer-directed DNA sequencing using automated fluorescence detection.

Automated fluorescence-based DNA sequence analysis offers the possibility to undertake very large scale sequencing projects. Directed strategies, such as the specific-primer-directed sequencing approach ('gene walking'), should prove useful in such projects. Described herein is a study involving the use of this approach in conjunction with automated fluorescence detection on a commercial instrument (ABI 370A DNA sequencer). This includes procedures for the rapid chemical synthesis and purification of labeled primers, the design of primer sequences that are compatible with the commercial analysis software, and automated DNA sequence analysis using such primers. A set of four fluorophore-labeled primers can be reliably synthesized in a twenty-four hour period, and greater than 300 nucleotides of analyzed new sequence obtained using this set in an additional twenty-four hours. Scale-up of these procedures to take advantage of the full capabilities of the sequencer is, at present, too slow and costly to be suitable for routine sequencing, and therefore the use of specific-primers is best suited to the closure of gaps in extended sequence produced using random cloning and sequencing strategies.     

Optimal conditions to use Pfu exo(-) DNA polymerase for highly efficient ligation-mediated polymerase chain reaction protocols

Ligation-Mediated Polymerase Chain Reaction (LMPCR) is the most sensitive sequencing technique available to map single-stranded DNA breaks at the nucleotide level of resolution using genomic DNA. LMPCR has been adapted to map DNA damage and reveal DNA-protein interactions inside living cells. However, the sequence context (GC content), the global break frequency and the current combination of DNA polymerases used in LMPCR affect the quality of the results. In this study, we developed and optimized an LMPCR protocol adapted for Pyrococcus furiosus exo(-) DNA polymerase (Pfu exo(-)). The relative efficiency of Pfu exo(-) was compared to T7-modified DNA polymerase (Sequenase 2.0) at the primer extension step and to Thermus aquaticus DNA polymerase (Taq) at the PCR amplification step of LMPCR. At all break frequencies tested, Pfu exo(-) proved to be more efficient than Sequenase 2.0. During both primer extension and PCR amplification steps, the ratio of DNA molecules per unit of DNA polymerase was the main determinant of the efficiency of Pfu exo(-), while the efficiency of Taq was less affected by this ratio. Substitution of NaCl for KCl in the PCR reaction buffer of Taq strikingly improved the efficiency of the DNA polymerase. Pfu exo(-) was clearly more efficient than Taq to specifically amplify extremely GC-rich genomic DNA sequences. Our results show that a combination of Pfu exo(-) at the primer extension step and Taq at the PCR amplification step is ideal for in vivo DNA analysis and DNA damage mapping using LMPCR.     

PCR performance of the highly thermostable proof-reading B-type DNA polymerase from Pyrococcus abyssi

DNA polymerase from the archaeon Pyrococcus abyssi strain Orsay was expressed in Escherichia coli. The recombinant DNA polymerase (Pab) was purified to homogeneity by heat treatment followed by 5 steps of chromatography and characterized for PCR applications. Buffer optimization experiments indicated that Pab PCR performance and fidelity parameters were highest in the presence of 20 mM Tris-HCl, pH 9.0, 1.5 mM MgSO4, 25 mM KCl, 10 mM (NH4)2SO4 and 40 microM of each dNTP. Under these conditions, the error rate was 0.66.10(-6) mutations/nucleotide/duplication. Pab DNA polymerase, having a half life of 5 h at 100 degrees C, was demonstrated to be highly thermostable in PCR conditions compared to commercial Taq and Pfu DNA polymerases. These characteristics enable Pab to be one of the most efficient thermostable DNA polymerases described, exhibiting very high accuracy compared to other available commercial DNA polymerases and robust thermostable activity. This new DNA polymerase is currently on the market under the name Isis DNA Polymerase (Qbiogene Molecular Biology).     

Amplification of the phage lambda DNA sequence by polymerase chain reaction using thermostable DNA polymerase]

The efficiency of phage DNA amplification by the method of polymerase chain reaction (PCR) with Tth DNA-polymerase was studied for optimization of PCR conditions. The effect on amplification efficiency of medium ionic strength and pH, the presence of univalent cations, detergents, gelatin, ATP, pyrophosphate, SH-reagents and ratio of concentrations of Mg and dNTPs, primers and template was studied. It has been found that a pH optimum for PCR with Tth DNA-polymerase varies from 8.5 to 9.0. An ionic strength optimum for PCR is about 0.08. The influence of univalent cations on the activity of Tth DNA-polymerase can be expressed as NH4+ greater than Na+ greater than K+. 0.01% Tween-20 significantly increases the efficiency of PCR and 0.01% gelatin inhibits it. Addition of ATP, pyrophosphate, SH-reagents to the reaction mixture did not increase the yield of PCR product. It has been also shown that for the given PCR-system an optimum Mg/dNTPs molar ratio is within the range of 1.5-2.0. An optimum concentration of each of the pair of primers for this PCR-system is about 0.3 microM. The possibility of PCR-amplification of 500-8500 b.p. DNA fragments has been demonstrated.     

High-fidelity amplification using a thermostable DNA polymerase isolated from Pyrococcus furiosus.

A thermostable DNA polymerase which possesses an associated 3'-to-5' exonuclease (proofreading) activity has been isolated from the hyperthermophilic archaebacterium, Pyrococcus furiosus (Pfu). To test its fidelity, we have utilized a genetic assay that directly measures DNA polymerase fidelity in vitro during the polymerase chain reaction (PCR). Our results indicate that PCR performed with the DNA polymerase purified from P. furiosus yields amplification products containing less than 10% of the number of mutations obtained from similar amplifications performed with Taq DNA polymerase. The PCR fidelity assay is based on the amplification and cloning of lacI, lacO and lacZ alpha gene sequences (lacIOZ alpha) using either Pfu or Taq DNA polymerase. Certain mutations within the lacI gene inactivate the Lac repressor protein and permit the expression of beta Gal. When plated on a chromogenic substrate, these LacI- mutants exhibit a blue-plaque phenotype. These studies demonstrate that the error rate per nucleotide induced in the 182 known detectable sites of the lacI gene was 1.6 x 10(-6) for Pfu DNA polymerase, a greater than tenfold improvement over the 2.0 x 10(-5) error rate for Taq DNA polymerase, after approx. 10(5)-fold amplification.     

Quantitation of heteroplasmy in mitochondrial DNA mutations by primer extension using Vent(R)(exo-) DNA polymerase and RFLP analysis

In this report we describe a simple and rapid protocol for reliable quantitation of mitochondrial DNA (mtDNA) mutations, which is basically a modification of the traditional polymerase chain reaction (PCR)/restriction fragment length polymorphism (RFLP) analysis technique. Up to now, the PCR/RFLP method has been of limited use for the accurate determination of ratios of mutant and wild type molecules, largely owing to the formation of heteroduplex molecules by PCR and incompleteness of restriction digestion. In order to overcome this problem, we have introduced a single-step primer extension reaction using Vent(R)(exo-) DNA polymerase and a fluorescence-labeled primer to the standard assay. The labeled homoduplex molecules are then digested with a restriction endonuclease, and the nucleic acids fractionated on an automated DNA sequencer equipped with GENESCAN analysis software. The amount of mutant mtDNA is readily estimated from fluorescence intensities of the wild-type and mutant mtDNA fragments corrected for incomplete digestion as monitored by a homologous control fragment. The accuracy of the improved protocol was determined by constructing standard curves obtained from defined mixtures of genomic DNA containing homoplasmic wild-type and mutant mtDNA. The expected values were obtained, with an observed correlation coefficient of 0.997 and a typical variability of +/-5% between repeated measurements. Further validation of the protocol is provided by the screening of five patients and unaffected subjects carrying the guanine to adenine transition at the nucleotide 3460 of the mitochondrial genome responsible for the mitochondrial disorder of Leber's hereditary optic neuropathy.     

PCR fidelity of pfu DNA polymerase and other thermostable DNA polymerases.

The replication fidelities of Pfu, Taq, Vent, Deep Vent and UlTma DNA polymerases were compared using a PCR-based forward mutation assay. Average error rates (mutation frequency/bp/duplication) increased as follows: Pfu (1.3 x 10(-6)) < Deep Vent (2.7 x 10(-6)) < Vent (2.8 x 10(-6)) < Taq (8.0 x 10(-6)) < < exo- Pfu and UlTma (approximately 5 x 10(-5)). Buffer optimization experiments indicated that Pfu fidelity was highest in the presence of 2-3 mM MgSO4 and 100-300 microM each dNTP and at pH 8.5-9.1. Under these conditions, the error rate of exo- Pfu was approximately 40-fold higher (5 x 10(-5)) than the error rate of Pfu. As the reaction pH was raised from pH 8 to 9, the error rate of Pfu decreased approximately 2-fold, while the error rate of exo- Pfu increased approximately 9-fold. An increase in error rate with pH has also been noted for the exonuclease-deficient DNA polymerases Taq and exo- Klenow, suggesting that the parameters which influence replication error rates may be similar in pol l- and alpha-like polymerases. Finally, the fidelity of 'long PCR' DNA polymerase mixtures was examined. The error rates of a Taq/Pfu DNA polymerase mixture and a Klentaq/Pfu DNA polymerase mixture were found to be less than the error rate of Taq DNA polymerase, but approximately 3-4-fold higher than the error rate of Pfu DNA polymerase.     

Direct sequencing of unpurified PCR-amplified DNA by semi-exponential cycle sequencing (SECS)

A simple technique for direct sequencing of PCR-amplified templates without purification of the PCR reaction product is presented. This method does not require an additional synthesis step after template amplification, and can generate sequence information form as little as 0.1 fmol of unpurified template.     

A simple and rapid preparation of M13 sequencing templates for manual and automated dideoxy sequencing.

A simple and rapid procedure for the preparation of M13 single stranded DNA sequencing templates which does not involve phenol extractions and alcohol precipitations is described. Bacteriophages are precipitated from media supernatants with acetic acid and recovered on glass fiber filters. Subsequent dissociation of the phages and removal of contaminants is performed while the DNA is bound to the glass. Finally, the purified DNA is eluted in a small volume of low-salt buffer. The yield is higher than that obtained by standard methods. The simplified procedure takes less than 30 minutes and does not demand special skills or equipment; the sequence resolution is as good as that obtained by standard procedures both with the Klenow fragment and T7 DNA polymerase, with radioactive labelling as well as in automated sequencing with a fluorescent label.     

Alternative dideoxy sequencing of double-stranded DNA by cyclic reactions using Taq polymerase.

The polymerase chain reaction (PCR) is a technique to amplify a specific DNA sequence millions of times. The thermostable enzyme Taq polymerase allows this procedure to take place under conditions of high specificity and automatization. By combining the techniques of PCR and dideoxy sequencing, it is possible to perform DNA sequencing independently of their structures. The cyclic sequencing reaction is carried out in the presence of an excess amount of sequencing primer and a radioactive nucleotide ([alpha-35S]dATP) using a DNA thermal cycler. Different reaction conditions were investigated and optimized including nucleotide ratios in each termination mix, primer/template ratios, amount of a radioactive nucleotide, and the program of the reaction. This method allows the detection of single base substitutions in heterozygous alleles, and the detection of homozygous deletions. A new RFLP of the human porphobilinogen deaminase (PBGD) gene was identified using this technique. This RFLP is created by one base difference (cytosine or adenine) that changes the restriction site for Apa LI. The alternative sequencing method described in this study is a simple and time-saving procedure that can also be used for large sequencing projects.     

Identification and sequencing of the Choristoneura biennis entomopoxvirus DNA polymerase gene.

A degenerate oligonucleotide probe corresponding to a highly conserved amino acid sequence in several DNA polymerases was used to locate the DNA polymerase gene in the Choristoneura biennis entomopoxvirus. Southern blot analysis of the entomopoxvirus genome using the degenerate oligonucleotide probe showed specific interaction between the probe and an eight kilobasepair EcoRI fragment from the entomopoxvirus genome. Sequencing this EcoRI fragment revealed an open reading frame 2892 nucleotides in length, capable of encoding a protein about 115 kilodaltons. Homology search of this open reading frame against other proteins indicated a high degree of homology in four distinct regions with DNA polymerases from other organisms. The highest degree of homology (24.9% at the amino acid level) was found between the vaccinia DNA polymerase gene and the entomopoxvirus open reading frame.