Surface, subunit interfaces and interior of oligomeric proteins

The solvent-accessible surface area (As) of 23 oligomeric proteins is calculated using atomic co-ordinates from high-resolution and well-refined crystal structures. As is correlated with the protein molecular weight, and a power law predicts its value to within 5% on average. The accessible surface of the average oligomer is similar to that of monomeric proteins in its hydropathy and amino acid composition. The distribution of the 20 amino acid types between the protein surface and its interior is also the same as in monomers. Interfaces, i.e. surfaces involved in subunit contacts, differ from the rest of the subunit surface. They are enriched in hydrophobic side-chains, yet they contain a number of charged groups, especially from Arg residues, which are the most abundant residues at interfaces except for Leu. Buried Arg residues are involved in H-bonds between subunits. We counted H-bonds at interfaces and found that several have none, others have one H-bond per 200 A2 of interface area on average (1 A = 0.1 nm). A majority of interface H-bonds involve charged donor or acceptor groups, which should make their contribution to the free energy of dissociation significant, even when they are few. The smaller interfaces cover about 700 A2 of the subunit surface. The larger ones cover 3000 to 10,000 A2, up to 40% of the subunit surface area in catalase. The lower value corresponds to an estimate of the accessible surface area loss required for stabilizing subunit association through the hydrophobic effect alone. Oligomers with small interfaces have globular subunits with accessible surface areas similar to those of monomeric proteins. We suggest that these oligomers assemble from preformed monomers with little change in conformation. In oligomers with large interfaces, isolated subunits should be unstable given their excessively large accessible surface, and assembly is expected to require major structural changes.     

Does structural and chemical divergence play a role in precluding undesirable protein interactions?

To understand the evolutionary forces establishing, maintaining, breaking, or precluding protein-protein interactions, a comprehensive data set of protein complexes has been analyzed to examine the overlap between protein interfaces and the most conserved or divergent protein surface areas. The most divergent areas tend to be found predominantly away from protein interfaces, although when found at interfaces, they are associated with specific lack of cross-reactivity between close homologues, like in antibody-antigen complexes. Moreover, the amino acid composition of highly variable regions is significantly different from any other protein surfaces. The variable regions present higher structural plasticity as a result of insertions and deletions, and favor charged over hydrophobic residues, a known strategy to minimize aggregation. This suggests that (1) a rapid rate of mutations at these regions might be continuously altering their properties, making difficult the coadaptation, in shape and chemical complementarity, to potential interacting partners; and (2) the existence of some form of selective pressure for variable areas away from interfaces to accumulate charged residues, perhaps as an evolutionary mechanism to increase solubility and minimize undesirable interactions within the crowded cellular environment. Finally, these results are placed into the context of the aberrant oligomerization of sickle-cell anemia hemoglobin and prion proteins.     

Synaptobrevin Transmembrane Domain Dimerization Studied by Multiscale Molecular Dynamics Simulations

Synaptic vesicle fusion requires assembly of the SNARE complex composed of SNAP-25, syntaxin-1, and synaptobrevin-2 (sybII) proteins. The SNARE proteins found in vesicle membranes have previously been shown to dimerize via transmembrane (TM) domain interactions. While syntaxin homodimerization is supposed to promote the transition from hemifusion to complete fusion, the role of synaptobrevin’s TM domain association in the fusion process remains poorly understood. Here, we combined coarse-grained and atomistic simulations to model the homodimerization of the sybII transmembrane domain and of selected TM mutants. The wild-type helix is shown to form a stable, right-handed dimer with the most populated helix-helix interface, including key residues predicted in a previous mutagenesis study. In addition, two alternative binding interfaces were discovered, which are essential to explain the experimentally observed higher-order oligomerization of sybII. In contrast, only one dimerization interface was found for a fusion-inactive poly-Leu mutant. Moreover, the association kinetics found for this mutant is lower as compared to the wild-type. These differences in dimerization between the wild-type and the poly-Leu mutant are suggested to be responsible for the reported differences in fusogenic activity between these peptides. This study provides molecular insight into the role of TM sequence specificity for peptide aggregation in membranes.     

Amino acid substitutions at protein–protein interfaces that modulate the oligomeric state

Despite similarities in their sequence and structure, there are a number of homologous proteins that adopt various oligomeric states. Comparisons of these homologous protein pairs, in terms of residue substitutions at the protein–protein interfaces, have provided fundamental characteristics that describe how proteins interact with each other. We have prepared a dataset composed of pairs of related proteins with different homo‐oligomeric states. Using the protein complexes, the interface residues were identified, and using structural alignments, the shadow‐interface residues have been defined as the surface residues that align with the interface residues. Subsequently, we investigated residue substitutions between the interfaces and the shadow interfaces. Based on the degree of the contributions to the interactions, the aligned sites of the interfaces and shadow interfaces were divided into primary and secondary sites; the primary sites are the focus of this work. The primary sites were further classified into two groups (i.e. exposed and buried) based on the degree to which the residue is buried within the shadow interfaces. Using these classifications, two simple mechanisms that mediate the oligomeric states were identified. In the primary‐exposed sites, the residues on the shadow interfaces are replaced by more hydrophobic or aromatic residues, which are physicochemically favored at protein–protein interfaces. In the primary‐buried sites, the residues on the shadow interfaces are replaced by larger residues that protrude into other proteins. These simple rules are satisfied in 23 out of 25 Structural Classification of Proteins (SCOP) families with a different‐oligomeric‐state pair, and thus represent a basic strategy for modulating protein associations and dissociations. Proteins 2010. © 2009 Wiley‐Liss, Inc.     

Residue frequencies and pairing preferences at protein-protein interfaces

We used a nonredundant set of 621 protein-protein interfaces of known high-resolution structure to derive residue composition and residue-residue contact preferences. The residue composition at the interfaces, in entire proteins and in whole genomes correlates well, indicating the statistical strength of the data set. Differences between amino acid distributions were observed for interfaces with buried surface area of less than 1,000 A(2) versus interfaces with area of more than 5,000 A(2). Hydrophobic residues were abundant in large interfaces while polar residues were more abundant in small interfaces. The largest residue-residue preferences at the interface were recorded for interactions between pairs of large hydrophobic residues, such as Trp and Leu, and the smallest preferences for pairs of small residues, such as Gly and Ala. On average, contacts between pairs of hydrophobic and polar residues were unfavorable, and the charged residues tended to pair subject to charge complementarity, in agreement with previous reports. A bootstrap procedure, lacking from previous studies, was used for error estimation. It showed that the statistical errors in the set of pairing preferences are generally small; the average standard error is approximately 0.2, i.e., about 8% of the average value of the pairwise index (2.9). However, for a few pairs (e.g., Ser-Ser and Glu-Asp) the standard error is larger in magnitude than the pairing index, which makes it impossible to tell whether contact formation is favorable or unfavorable. The results are interpreted using physicochemical factors and their implications for the energetics of complex formation and for protein docking are discussed. Proteins 2001;43:89-102.     

The evolutionary transition from monomeric to oligomeric proteins: tools, the environment, hypotheses

Recently, renewed interest in the evolution of oligomeric proteins has seen new approaches explored and new hypotheses proposed. The model systems chosen are generally made up of pairs of homologous proteins, each composed of a monomer and a dimeric counterpart, but the question has been also approached by comparing statistically significant structural patterns in sets of monomeric and oligomeric proteins. Here the tools of genetics and chemistry potentially available to the evolution of oligomeric proteins are discussed, as well as the possible effects of environments on the early attempts to oligomerization. Traces of an ancestral monomeric status of oligomers may be detected in the significant presence of polar and charged residues at intersubunit interfaces, and by the recognition that, besides the hydrophobic effect, a 'hydrophilic' effect has also had a role in the construction of these interfaces. The traditional 'mutation' model is described and found to be based on a hierarchy of mutations, crowned by a 'primary' mutation, one that could prime oligomerization by irreversibly altering the structure of an ancestral monomer. The mechanism of oligomerization based on the exchange or 'swap' of structural elements between monomers is discussed. The possibility is also discussed that the main steps in the folding pathway of an oligomeric protein reiterate the main steps in its evolution.     

Predicting where Small Molecules Bind at Protein-Protein Interfaces

Small molecules that bind at protein-protein interfaces may either block or stabilize protein-protein interactions in cells. Thus, some of these binding interfaces may turn into prospective targets for drug design. Here, we collected 175 pairs of protein-protein (PP) complexes and protein-ligand (PL) complexes with known three-dimensional structures for which (1) one protein from the PP complex shares at least 40% sequence identity with the protein from the PL complex, and (2) the interface regions of these proteins overlap at least partially with each other. We found that those residues of the interfaces that may bind the other protein as well as the small molecule are evolutionary more conserved on average, have a higher tendency of being located in pockets and expose a smaller fraction of their surface area to the solvent than the remaining protein-protein interface region. Based on these findings we derived a statistical classifier that predicts patches at binding interfaces that have a higher tendency to bind small molecules. We applied this new prediction method to more than 10 000 interfaces from the protein data bank. For several complexes related to apoptosis the predicted binding patches were in direct contact to co-crystallized small molecules.     

Construction and characterization of protein libraries composed of secondary structure modules

Only a minute fraction of all possible protein sequences can exist in the genomes of all life forms. To explore whether physicochemical constraints or a lack of need causes the paucity of different protein folds, we set out to construct protein libraries without any restriction of topology. We generated different libraries (all alpha-helix, all beta-strand, and alpha-helix plus beta-strand) with an average length of 100 amino acid residues, composed of designed secondary structure modules (alpha-helix, beta-strand, and beta-turn) in various proportions, based primarily on the patterning of polar and nonpolar residues. We wished to explore that part of sequence space that is rich in secondary structure. The analysis of randomly chosen clones from each of the libraries showed that, despite the low sequence homology to known protein sequences, a substantial proportion of the library members containing alpha-helix modules were indeed helical, possess a defined oligomerization state, and showed cooperative chemical unfolding behavior. On the other hand, proteins composed of mainly beta-strand modules tended to form amyloid-like fibrils and were among the least soluble proteins ever reported. We found that a large fraction of members in non-beta-strand-containing protein libraries that are distant from natural proteins in sequence space possess unexpectedly favorable properties. These results reinforce the efficacy of applying binary patterning to design proteins with native-like properties despite lack of restriction in topology. Because of the intrinsic tendency of beta-strand modules to aggregate, their presence requires precise topologic arrangement to prevent fibril formation.     

Engineered oligomerization state of OmpF protein through computational design decouples oligomer dissociation from unfolding

Biogenesis of β-barrel membrane proteins is a complex, multistep, and as yet incompletely characterized process. The bacterial porin family is perhaps the best-studied protein family among β-barrel membrane proteins that allows diffusion of small solutes across the bacterial outer membrane. In this study, we have identified residues that contribute significantly to the protein-protein interaction (PPI) interface between the chains of outer membrane protein F (OmpF), a trimeric porin, using an empirical energy function in conjunction with an evolutionary analysis. By replacing these residues through site-directed mutagenesis either with energetically favorable residues or substitutions that do not occur in natural bacterial outer membrane proteins, we succeeded in engineering OmpF mutants with dimeric and monomeric oligomerization states instead of a trimeric oligomerization state. Moreover, our results suggest that the oligomerization of OmpF proceeds through a series of interactions involving two distinct regions of the extensive PPI interface: two monomers interact to form a dimer through the PPI interface near G19. This dimer then interacts with another monomer through the PPI interface near G135 to form a trimer. We have found that perturbing the PPI interface near G19 results in the formation of the monomeric OmpF only. Thermal denaturation of the designed dimeric OmpF mutant suggests that oligomer dissociation can be separated from the process of protein unfolding. Furthermore, the conserved site near G57 and G59 is important for the PPI interface and might provide the essential scaffold for PPIs.     

How oligomerization contributes to the thermostability of an archaeon protein. Protein L-isoaspartyl-O-methyltransferase from Sulfolobus tokodaii

To study how oligomerization may contribute to the thermostability of archaeon proteins, we focused on a hexameric protein, protein L-isoaspartyl-O-methyltransferase from Sulfolobus tokodaii (StoPIMT). The crystal structure shows that StoPIMT has a distinctive hexameric structure composed of monomers consisting of two domains: an S-adenosylmethionine-dependent methyltransferase fold domain and a C-terminal alpha-helical domain. The hexameric structure includes three interfacial contact regions: major, minor, and coiled-coil. Several C-terminal deletion mutants were constructed and characterized. The hexameric structure and thermostability were retained when the C-terminal alpha-helical domain (Tyr(206)-Thr(231)) was deleted, suggesting that oligomerization via coiled-coil association using the C-terminal alpha-helical domains did not contribute critically to hexamerization or to the increased thermostability of the protein. Deletion of three additional residues located in the major contact region, Tyr(203)-Asp(204)-Asp(205), led to a significant decrease in hexamer stability and chemico/thermostability. Although replacement of Thr(146) and Asp(204), which form two hydrogen bonds in the interface in the major contact region, with Ala did not affect hexamer formation, these mutations led to a significant decrease in thermostability, suggesting that two residues in the major contact region make significant contributions to the increase in stability of the protein via hexamerization. These results suggest that cooperative hexamerization occurs via interactions of "hot spot" residues and that a couple of interfacial hot spot residues are responsible for enhancing thermostability via oligomerization.     

Residue conservation in viral capsid assembly

To evaluate the evolutionary constraints placed on viral proteins by the structure and assembly of the capsid, we calculate Shannon entropies in the aligned sequences of 45 polypeptide chains in 32 icosahedral viruses, and relate these entropies to the residue location in the three-dimensional structure of the capsids. Three categories of residues have entropies lower than the chain average implying that they are better conserved than average: residues that are buried within a subunit (the protein core), residues that contain atoms buried at an interface between subunits (the interface core), and residues that contribute to several such interfaces. The interface core is also conserved in homomeric proteins and in transient protein-protein complexes, which have only one interface whereas capsids have many. In capsids, the subunit interfaces implicate most of the polypeptide chain: on average, 66% of the capsid residues are at an interface, 34% at more than one, and 47% at the interface core. Nevertheless, we observe that the degree of residue conservation can vary widely between interfaces within a capsid and between regions within an interface. The interfaces and regions of interfaces that show a low sequence variability are likely to play major roles in the self-assembly of the capsid, with implications on its mechanism that we discuss taking adeno-associated virus as an example.     

Binding interface prediction by combining protein–protein docking results

We developed a method called residue contact frequency (RCF), which uses the complex structures generated by the protein–protein docking algorithm ZDOCK to predict interface residues. Unlike interface prediction algorithms that are based on monomers alone, RCF is binding partner specific. We evaluated the performance of RCF using the area under the precision‐recall (PR) curve (AUC) on a large protein docking Benchmark. RCF (AUC = 0.44) performed as well as meta‐PPISP (AUC = 0.43), which is one of the best monomer‐based interface prediction methods. In addition, we test a support vector machine (SVM) to combine RCF with meta‐PPISP and another monomer‐based interface prediction algorithm Evolutionary Trace to further improve the performance. We found that the SVM that combined RCF and meta‐PPISP achieved the best performance (AUC = 0.47). We used RCF to predict the binding interfaces of proteins that can bind to multiple partners and RCF was able to correctly predict interface residues that are unique for the respective binding partners. Furthermore, we found that residues that contributed greatly to binding affinity (hotspot residues) had significantly higher RCF than other residues. Proteins 2014; 82:57–66. © 2013 Wiley Periodicals, Inc.     

Evolution of specific protein-protein interaction sites following gene duplication

Gene duplication is a common evolutionary process that leads to the expansion and functional diversification of protein subfamilies. The evolutionary events that cause paralogous proteins to bind different protein ligands (functionally diverged interfaces) are investigated and compared to paralogous proteins that bind the same protein ligand (functionally preserved interfaces). We find that functionally diverged interfaces possess more subfamily-specific residues than functionally preserved interfaces. These subfamily-specific residues are usually partially buried at the interface rim and achieve specific binding through optimized hydrogen bond geometries. In addition to optimized hydrogen bond geometries, side-chain modeling experiments suggest that steric effects are also important for binding specificity. Residues that are completely buried at the interface hub are also less conserved in functionally diverged interfaces than in functionally preserved interfaces. Consistent with this finding, hub residues contribute less to free energy of binding in functionally diverged interfaces than in functionally preserved interfaces. Therefore, we propose that protein binding is a delicate balance between binding affinity that primarily occurs at the interface hub and binding specificity that primarily occurs at the interface rim.     

Structural and functional roles for beta-strand 7 in the alpha-crystallin domain of p26, a polydisperse small heat shock protein from Artemia franciscana

Oviparous development in the extremophile crustacean, Artemia franciscana, generates encysted embryos which enter a profound state of dormancy, termed diapause. Encystment is marked by the synthesis of p26, a polydisperse small heat shock protein thought to protect embryos from stress. In order to elucidate structural/functional relationships within p26 and other polydisperse small heat shock proteins, and to better define the protein's role during diapause, amino acid substitutions R110G, F112R, R114A and Y116D were generated within the p26 alpha-crystallin domain by site-directed mutagenesis. These residues were chosen because they are highly conserved across species boundaries, and molecular modelling indicates that they are part of a key structural interface between dimers. The F112R mutation, which had the greatest impact on oligomerization, placed two charged residues at the p26 dimer-dimer interface, demonstrating the importance of beta-strand 7 in tetramer formation. All mutated versions of p26 were less able than wild-type p26 to confer thermotolerance on transformed bacteria and they exhibited diminished chaperone action in three in vitro assays; however, all variants retained protective activity. This apparent stability of p26 may, by prolonging effective chaperone life in vivo, enhance embryo stress resistance. All substitutions modified p26 intrinsic fluorescence, surface hydrophobicity and secondary structure, and the pronounced changes in variant R114A, as indicated by these physical measurements, correlated with the greatest loss of function. Although mutation R114A had the greatest effect on p26 chaperoning, it had the least on oligomerization. These results demonstrate that in contrast to many other small heat shock proteins, p26 effectiveness as a chaperone is independent of oligomerization. The results also reinforce the idea, occasioned by modelling, that R114 is removed slightly from dimer-dimer interfaces. Moreover, beta-strand 7 is shown to have an important role in oligomerization of p26, a function first proposed for this structural element upon crystallization of wheat Hsp16.9, a small heat shock protein with different quaternary structure.     

Analysing six types of protein-protein interfaces

Non-covalent residue side-chain interactions occur in many different types of proteins and facilitate many biological functions. Are these differences manifested in the sequence compositions and/or the residue-residue contact preferences of the interfaces? Previous studies analysed small data sets and gave contradictory answers. Here, we introduced a new data-mining method that yielded the largest high-resolution data set of interactions analysed. We introduced an information theory-based analysis method. On the basis of sequence features, we were able to differentiate six types of protein interfaces, each corresponding to a different functional or structural association between residues. Particularly, we found significant differences in amino acid composition and residue-residue preferences between interactions of residues within the same structural domain and between different domains, between permanent and transient interfaces, and between interactions associating homo-oligomers and hetero-oligomers. The differences between the six types were so substantial that, using amino acid composition alone, we could predict statistically to which of the six types of interfaces a pool of 1000 residues belongs at 63-100% accuracy. All interfaces differed significantly from the background of all residues in SWISS-PROT, from the group of surface residues, and from internal residues that were not involved in non-trivial interactions. Overall, our results suggest that the interface type could be predicted from sequence and that interface-type specific mean-field potentials may be adequate for certain applications.     

Stabilization of a protein nanocage through the plugging of a protein-protein interfacial water pocket

The unique structural properties of the ferritin protein cages have provided impetus to focus on the methodical study of these self-assembling nanosystems. Among these proteins, Escherichia coli bacterioferritin (EcBfr), although architecturally very similar to other members of the family, shows structural instability and an incomplete self-assembly behavior by populating two oligomerization states. Through computational analysis and comparison to its homologues, we have found that this protein has a smaller than average dimeric interface on its 2-fold symmetry axis mainly because of the existence of an interfacial water pocket centered around two water-bridged asparagine residues. To investigate the possibility of engineering EcBfr for modified structural stability, we have used a semiempirical computational method to virtually explore the energy differences of the 480 possible mutants at the dimeric interface relative to that of wild-type EcBfr. This computational study also converged on the water-bridged asparagines. Replacing these two asparagines with hydrophobic amino acids resulted in proteins that folded into α-helical monomers and assembled into cages as evidenced by circular dichroism and transmission electron microscopy. Both thermal and chemical denaturation confirmed that, in all cases, these proteins, in agreement with the calculations, possessed increased stability. One of the three mutations shifts the population in favor of the higher-order oligomerization state in solution as evidenced by both size exclusion chromatography and native gel electrophoresis. These results taken together suggest that our low-level design was successful and that it may be possible to apply the strategy of targeting water pockets at protein--protein interfaces to other protein cage and self-assembling systems. More generally, this study further demonstrates the power of jointly employing in silico and in vitro techniques to understand and enhance biostructural energetics.     

Side-chain conformational changes upon Protein-Protein Association

Conformational changes upon protein-protein association are the key element of the binding mechanism. The study presents a systematic large-scale analysis of such conformational changes in the side chains. The results indicate that short and long side chains have different propensities for the conformational changes. Long side chains with three or more dihedral angles are often subject to large conformational transition. Shorter residues with one or two dihedral angles typically undergo local conformational changes not leading to a conformational transition. A relationship between the local readjustments and the equilibrium fluctuations of a side chain around its unbound conformation is suggested. Most of the side chains undergo larger changes in the dihedral angle most distant from the backbone. The frequencies of the core-to-surface interface transitions of six nonpolar residues and Tyr are larger than the frequencies of the opposite surface-to-core transitions. The binding increases both polar and nonpolar interface areas. However, the increase of the nonpolar area is larger for all considered classes of protein complexes, suggesting that the protein association perturbs the unbound interfaces to increase the hydrophobic contribution to the binding free energy. To test modeling approaches to side-chain flexibility in protein docking, conformational changes in the X-ray set were compared with those in the docking decoy sets. The results lead to a better understanding of the conformational changes in proteins and suggest directions for efficient conformational sampling in docking protocols.     

Design of multi-specificity in protein interfaces

Interactions in protein networks may place constraints on protein interface sequences to maintain correct and avoid unwanted interactions. Here we describe a “multi-constraint” protein design protocol to predict sequences optimized for multiple criteria, such as maintaining sets of interactions, and apply it to characterize the mechanism and extent to which 20 multi-specific proteins are constrained by binding to multiple partners. We find that multi-specific binding is accommodated by at least two distinct patterns. In the simplest case, all partners share key interactions, and sequences optimized for binding to either single or multiple partners recover only a subset of native amino acid residues as optimal. More interestingly, for signaling interfaces functioning as network “hubs,” we identify a different, “multi-faceted” mode, where each binding partner prefers its own subset of wild-type residues within the promiscuous binding site. Here, integration of preferences across all partners results in sequences much more “native-like” than seen in optimization for any single binding partner alone, suggesting these interfaces are substantially optimized for multi-specificity. The two strategies make distinct predictions for interface evolution and design. Shared interfaces may be better small molecule targets, whereas multi-faceted interactions may be more “designable” for altered specificity patterns. The computational methodology presented here is generalizable for examining how naturally occurring protein sequences have been selected to satisfy a variety of positive and negative constraints, as well as for rationally designing proteins to have desired patterns of altered specificity.     

The Subunit Interfaces of Weakly Associated Homodimeric Proteins

We analyzed subunit interfaces in 315 homodimers with an X-ray structure in the Protein Data Bank, validated by checking the literature for data that indicate that the proteins are dimeric in solution and that, in the case of the “weak” dimers, the homodimer is in equilibrium with the monomer. The interfaces of the 42 weak dimers, which are smaller by a factor of 2.4 on average than in the remainder of the set, are comparable in size with antibody-antigen or protease-inhibitor interfaces. Nevertheless, they are more hydrophobic than in the average transient protein-protein complex and similar in amino acid composition to the other homodimer interfaces. The mean numbers of interface hydrogen bonds and hydration water molecules per unit area are also similar in homodimers and transient complexes. Parameters related to the atomic packing suggest that many of the weak dimer interfaces are loosely packed, and we suggest that this contributes to their low stability. To evaluate the evolutionary selection pressure on interface residues, we calculated the Shannon entropy of homologous amino acid sequences at 60% sequence identity. In 93% of the homodimers, the interface residues are better conserved than the residues on the protein surface. The weak dimers display the same high degree of interface conservation as other homodimers, but their homologs may be heterodimers as well as homodimers. Their interfaces may be good models in terms of their size, composition, and evolutionary conservation for the labile subunit contacts that allow protein assemblies to share and exchange components, allosteric proteins to undergo quaternary structure transitions, and molecular machines to operate in the cell.