Industrial Whey Utilization as a Medium Supplement for Biphasic Growth and Bacteriocin Production by Probiotic Lactobacillus casei LA-1

The ability of probiotic Lactobacillus casei LA-1 for bacteriocin production using industrial by-products, such as whey, as supplement in growth medium has been demonstrated for the first time. Whey was investigated as a sole carbon source in cooperation with other components to substitute expensive nutrients as MRS for economical bacteriocin production. Industrial whey-supplemented MRS medium was then selected as to determine the effect of four variables (temperature, initial pH, incubation time, and whey concentration) by response surface methodology on bacteriocin production. Statistical analysis of results showed that two variables have a significant effect on bacteriocin production. Response surface data showed maximum bacteriocin production of 6,132.33?AU/mL at an initial pH of 7.12, temperature 34.29?°C, and whey concentration 13.74?g/L. The production of bacteriocin started during the exponential growth phase, reaching maximum values at stationary phase, and a biphasic growth and production pattern was observed. Our current work demonstrates that this approach of utilization of whey as substitution in costly medium as MRS has great promise for cost reduction in industry for the production of novel biological metabolic product that can be utilized as a food preservative.     

Stenotrophomonas maltophilia Gd2: A potential and novel isolate for fibrinolytic enzyme production

The bacterium with an ability to produce extracellular fibrinolytic protease was isolated and identified as Stenotrophomonas maltophilia Gd2 based on ribotyping. The in-vitro fibrinolytic profile of this enzyme depicted 73% of fibrin clot dissolution within 4 h. Fibrinolytic enzyme yield influenced by different physiological (incubation time, temperature, agitation and pH), nutritional (macronutrients such as carbon and nitrogen sources) and biological (inoculums age and inoculums concentration) parameters of fermentation which were optimized based on one-factor-at-a-time (OFAT) approach. The enzyme yield improved from 886 to 1795 FU ml⁻¹ upon OFAT; optimized conditions include temperature – 33 °C, pH – 8.0, incubation time – 36 h, agitation – 150 RPM, 3% v/v inoculums and age of inoculum – 18 h. Further optimization of enzyme production was achieved with implementation of Plackett-Burman media designing where the production levels increased to 3411 FU ml⁻¹ and noticed that peptone, pH, dextrose and K₂HPO₄ was found to be significant factor. This ms reports the highest fibrinolytic enzyme yield with S. maltophilia to that of literature reports.     

Lactobacillus plantarum isolated from molasses produces bacteriocins active against Gram-negative bacteria

Two bacteriocins, ST28MS and ST26MS, produced by Lactobacillus plantarum isolated from molasses, inhibited the growth of Lactobacillus casei, Lactobacillus sakei, Staphylococcus aureus, Enterococcus faecalis, Pseudomonas aeruginosa, Escherichia coli and Acinetobacter baumanii. The mode of activity of the bacteriocins is bacteriostatic, as observed against L. casei and P. aeruginosa. Reduction in antimicrobial activity was recorded after treatment with Proteinase K, papain, trypsin, chymotrypsin, pronase, pepsin and protease. Both peptides remained active after 20 min at 121 °C. Bacteriocin ST28MS was produced at much higher levels (12,800 AU/mL) compared to bacteriocin ST26MS (6400 AU/mL) with glucose as carbon source. The activity of bacteriocin ST28MS decreased by 50% at pH below 4.0. Bacteriocin ST26MS, on the other hand, is more stable at this pH. Production of both bacteriocins is stimulated by tryptone. Potassium (KH₂PO₄ and K₂HPO₄) at 5 and 10 g/L stimulated the production of bacteriocin ST28MS, but not bacteriocin ST26MS. MRS supplemented with glycerol (1–5 g/L) did not result in any changes in the activity levels of the two bacteriocins. Ascorbic acid and Vitamins B₁ and B₁₂ are required for bacteriocin ST28MS production, but only Vitamin B₁₂ for bacteriocin ST26MS production. No plasmids were recorded for strains ST28MS and ST26MS, suggesting that the genes encoding production of the two bacteriocins are located on the genomes.     

Purification and Characterization of Bacteriocin Produced by Lactobacillus brevis UN Isolated from Dhulliachar: a Traditional Food Product of North East India

A bacteriocin producing strain Lactobacillus brevis UN isolated from Dulliachar—a salted pickle and identified by biochemical and molecular methods. L. brevis UN was found to produce bacteriocin with broad spectrum activity against spoilage causing/food borne pathogens viz. L. monocytogenes, C. perfringens, S. aureus, L. mesenteroides, L. plantarum and B. cereus. Bacteriocin production was optimized through classical one variable at a time method. The isolate showed maximum bacteriocin production at early stationary phase, pH 4.0, temperature 35 °C and with an inoculum size of 1.5 OD @ 10 %. Bacteriocin produced by L. brevis UN was purified to homogeneity by single step gel exclusion chromatography and was most active at pH 6.0 and 7.0, stable up to 100 °C and was proteinaceous in nature. The results of NMR revealed the presence of proline, glutamic acid, aspartic acid, leucine, isoleucine and serine in its peptide structure. PCR amplification analysis determined that bacteriocin encoded gene in L. brevis UN was plasmid bound.     

Production of Bacteriocin ST33LD, Produced by Leuconostoc mesenteroides subsp. mesenteroides, as Recorded in the Presence of Different Medium Components

Summary Bacteriocin ST33LD, produced by Leuconostoc mesenteroides subsp. mesenteroides, is approximately 2.7 kDa in size and inhibits Enterococcus faecalis, Escherichia coli, Lactobacillus casei and Pseudomonas aeruginosa. Good growth was recorded in the presence of 10% (w/v) soy milk or 10% (w/v) molasses, but there was no bacteriocin production. Growth in MRS broth adjusted to pH 4.5 yielded low bacteriocin levels (800 AU/ml). However, the same medium adjusted to pH 5.0, 5.5 and 6.5, respectively, yielded 3200 AU/ml. Tween 80 decreased bacteriocin production by more than 50%. Growth in the presence of tryptone yielded maximal activity (12,800 AU/ml), whereas different combinations of tryptone, meat extract and yeast extract produced activity levels of 1600 AU/ml and less. Growth in the presence of 2.0% (w/v) sucrose, or maltose, yielded much higher levels of bacteriocin activity (12,800 AU/ml) compared to growth in the presence of 2.0% (w/v) glucose or lactose (6400 AU/ml). Lower yields were also recorded in the presence of fructose and mannose. KH₂PO₄ at 10.0% (w/v) stimulated bacteriocin production. Glycerol concentrations of 0.5% (w/v) and higher (up to 5.0%, w/v) repressed bacteriocin production by 50%. The addition of cyanocobalamin, thiamine and L-ascorbic acid to MRS broth (1.0 ppm) yielded 12,800 AU/ml bacteriocin, whereas the addition of DL-6,8-thioctic acid yielded only 6 400 AU/ml.     

Effect of Medium Components on Bacteriocin Production by Lactobacillus Pentosus ST151BR,a Strain Isolated from Beer Produced by the Fermentation of Maize,Barley and Soy Flour

Lactobacillus pentosus ST151BR, isolated from home-brewed beer, produces a 3.0 kDa antibacterial peptide (bacteriocin ST151BR) active against Lactobacillus casei, Lactobacillus sakei, Pseudomonas aeruginosa, Enterococcus faecalis and Escherichia coli. Treatment with Proteinase K or Pronase resulted in loss of activity. Bacteriocin levels of 6400 AU/ml were recorded in MRSbb (De Man-Rogosa-Sharpe broth without Tween 80) at pH 5.5, 6.0 and 6.5. The same growth conditions at pH 4.5 yielded only 1600 AU/ml bacteriocin. Inclusion of Tween 80 in the growth medium reduced bacteriocin production by more than 50%. Growth in the presence of tryptone or tryptone plus meat extract stimulated bacteriocin production, whereas much lower activity was recorded when the bacteria were grown in the presence of meat extract, yeast extract, tryptone plus yeast extract, meat extract plus yeast extract, or a combination of tryptone, meat extract and yeast extract. MRSbb supplemented with maltose, lactose or mannose (2.0%, w/v) yielded bacteriocin levels of 6400 AU/ml. Sucrose or fructose at these concentrations reduced the activity by 50 and 75%, respectively. Growth in the presence of 4.0%(w/v) glucose resulted in 50% activity loss. Glycerol levels as low as 0.1%(w/v) repressed bacteriocin production. Addition of cyanocobalamin, ascorbic acid, thiamine and thioctic acid (1.0 mg/l) to the growth medium did not lead to an increase in bacteriocin production. This revised version was published online in July 2006 with corrections to the Cover Date.     

Detection, purification and efficacy of warnerin produced by Staphylococcus warneri

Summary Three strains of Staphylococcus warneri (FM10, FM20 and FM30) isolated from meat samples were investigated for their ability to synthesize bacteriocin. All the tested strains produced warnerin, a new peptide bacteriocin; which inhibits the growth of a large number of Gram-positive and Gram-negative bacteria. The inhibitory effect of warnerin produced by the FM20 isolate was high when compared to the other isolates. The results on the effect of carbon sources, nitrogen sources, pH, temperature, incubation time and surfactant (tween 80) inferred that the bacteriocin production was high in medium supplemented with 1% glucose (12,800 AU/ml), 1% urea (6800 AU/ml), and 0.5% Tween 80 (25,600 AU/ml). The higher productivity of bacteriocin was registered during 12 h of incubation in the medium pH 6.5 at 37 °C temperature. Among the various indicator strains tested, Staphylococcus aureus was more sensitive to the bacteriocin activity. Partially purified warnerin exhibited a single band on SDS-PAGE with an apparent molecular weight of 2500 Da. Warnerin, the antibacterial compound was determined as a proteinaceous substance, since it lost its activity when pepsin was added.     

Effect of medium components on bacteriocin production by Lactobacillus plantarum strains ST23LD and ST341LD, isolated from spoiled olive brine

Bacteriocin ST23LD levels of 2930AU/OD were recorded in MRS broth (pH of 6.5) and in the presence of tryptone and yeast extract as sole nitrogen sources. Growth in MRS broth at an initial pH of 6.0 yielded only 1460AU/OD bacteriocin ST23LD. Activities of 5861AU/OD were recorded with maltose (20, 30 and 40 g/l) as sole carbon source and 9036AU/OD with the addition of 2.0-10.0 g/l KH2PO4. Bacteriocin ST341LD levels of 2850 and 2841AU/OD were recorded in MRS broth at an initial pH of 6.0 or 5.5, respectively. Only 709AU/OD was recorded in the same medium with an initial pH of 6.5. Bacteriocin ST341LD production was stimulated by the presence of tryptone. However, glucose at 10 and 40 g/l, or the presence of 5.0 or 10.0 g/l K2HPO4, resulted in a 50% reduction of bacteriocin activity. Glycerol in the growth medium repressed bacteriocin production. No increased bacteriocin production was recorded in medium supplemented with vitamins.     

Optimization and modeling studies on the production of a new fibrinolytic protease using <Emphasis Type="Italic">Streptomyces radiopugnans</Emphasis>_VITSD8

Background

The current study demonstrated the possibility of statistical design tools combination with computational tools for optimization of fermentation conditions for enhanced fibrinolytic protease production.

Methods

The effects of using different carbon and nitrogen sources for protease production by Streptomyces radiopugnans_VITSD8 were examined by a full factorial design method. The incubation time, temperature, pH of the medium, and RPM were assessed by the predictable one factor at a time (OFAT) method. Optimization was carried out using starch and oat meal as carbon source, nitrogen source as peptic and malt extract using Fractional Factorial Design (FFD). The analysis was further continued for medium volume, temperature, initial medium pH, inoculum concentration, high determination co-efficient as (R’-0.965), and lower determination co-efficient of variation (CV-8.19%), which defines a reliable and accurate experimental value.

Results

Analysis of variance by the fixed slope effect by temperature and starch; temperature and L-aspargine, temperature and oat meal, temperature and peptic extracts, temperature and pH, temperature and duration of incubation were more vital for protease production at an interactive level. Response surface plots revealed that temperature, starch, and peptic extracts affix critical concerning in temperature. Programming estimated a 28% increase in protease production. Incubation temperature and medium volume portrayed extreme impact among all factor. Starch, peptic and temperature play an important regulatory role in protease production. Optimium temperature for protease production was 33°C. The ratio of carbon and nitrogen sources and pH were the major regulatory factors in protease production by Streptomyces radiopugnans_VITSD8. It demonstrated a 4% noteworthy change in condition.

Conclusion

Among all the selected parameters, temperature was the most intuitive factor, demonstrating a notable connection with the type of media and pH, while inoculum fixation had a direct impact on protein production.

     

Medium components effecting bacteriocin production by two strains of Lactobacillus plantarum ST414BZ and ST664BZ isolated from boza

Bacteriocins ST414BZ and ST664BZ, produced by Lactobacillus plantarum, inhibited the growth of a number of lactic acid bacteria, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae and Enterobacter cloacae. Optimal production of bacteriocin ST664BZ (12 800 AU/mL) was recorded in MRS broth with an initial pH of 6.0 and 6.5. Bacteriocin ST414BZ was produced in MRS broth at lower pH values, ranging from 6.5 to 5.0. Low levels of bacteriocin activity were produced in BHI, M17, 10% (w/v) soy flour and 10% (w/v) molasses, suggesting that specific nutrients are required for optimal production. Bacteriocin ST414BZ production doubled (from 12 800 to 25 600 AU/mL) in MRS broth with tryptone as sole nitrogen source, or when glucose was replaced with maltose. Bacteriocin ST664BZ production, on the other hand, was less influenced by changes in nitrogen content, but increased two-fold (to 25 600 AU/mL) when glucose was replaced with sucrose, maltose or mannose, or when MRS broth was supplemented with 2.0 g/L KH₂ PO₄. Enrichment of MRS broth with vitamins B₁₂, B₁ or C did not stimulate production of the two bacteriocins. Growth in the presence of DL-6,8-thioctic acid increased bacteriocin ST664BZ production to 25 600 AU/mL. Concluded from these results, optimal levels of bacteriocins ST414BZ and ST664BZ will be produced in boza enriched with tryptone and maltose.     

Comparison of bacteriocins production from Enterococcus faecium strains in cheese whey and optimised commercial MRS medium

The production of bacteriocins from cheap substrates could be useful for many food industrial applications. This study aimed at determining the conditions needed for optimal production of enterocins SD1, SD2, SD3 and SD4 secreted by Enterococcus faecium strains SD1, SD2, SD3 and SD4, respectively. To our knowledge, this is the first use of cheese whey—a low-cost milk by-product—as a substrate for bacteriocin production by E. faecium; skimmed milk and MRS broths were used as reference media. This cheese manufacturing residue proved to be a promising substrate for the production of bacteriocins. However, the levels of secreted antimicrobial compounds were lower than those achieved by E. faecium strains in MRS broth. Bacteriocin production was affected strongly by physical and chemical factors such as growth temperature, time of incubation, pH, and the chemical composition of the culture medium. The optimal temperature and time of incubation supporting the highest bacteriocin production was determined for each strain. Different types, sources and amounts of organic nitrogen, sugar, and inorganic salts played an essential role in bacteriocin secretion. E. faecium strains SD1 and SD2—producing high bacteriocin levels both in cheese whey and skimmed milk—could be of great interest for potential applications in cheese-making.     

Augmented cellulase production by Bacillus subtilis strain MU S1 using different statistical experimental designs

The production of cellulase by Bacillus subtilis MU S1, a strain isolated from Eravikulam National Park, was optimized using one-factor-at-a-time (OFAT) and statistical methods. Physical parameters like incubation temperature and agitation speed were optimized using OFAT and found to be 40?°C and 150?rpm, respectively, whereas, medium was optimized by statistical tools. Plackett-Burman design (PBD) was employed to screen the significant variables that highly influence cellulase production. The design showed carboxymethyl cellulose (CMC), yeast extract, NaCl, pH, MgSO₄ and NaNO₃ as the most significant components that affect cellulase production. Among these CMC, yeast extract, NaCl and pH showed positive effect whereas MgSO₄ and NaNO₃ were found to be significant at their lower levels. The optimum levels of the components that positively affect enzyme production were determined using response surface methodology (RSM) based on central composite design (CCD). Three factors namely CMC, yeast extract and NaCl were studied at five levels whilst pH of the medium was kept constant at 7. The optimal levels of the components were CMC (13.46?g/l), yeast extract (8.38?g/l) and NaCl (6.31?g/l) at pH 7. The maximum cellulase activity in optimized medium was 566.66?U/ml which was close to the predicted activity of 541.05?U/ml. Optimization of physical parameters and medium components showed an overall 3.2-fold increase in activity compared to unoptimized condition (179.06?U/ml).     

Influence of pH on growth and bacteriocin production byLactococcus lactis subsp.lactis 14ONWC during batch fermentation

The influence of pH on growth, and lactic acid and bacteriocin production byLactococcus lactis subsp.lactis 140 NWC was studied during batch fermentation in a lactose-based complex medium. Growth and lactic acid production were modelled using a simple logistic equation while substrate consumption was found to be a function growth and lactic acid production rate. The optimal pH for growth and lactic acid production was between 6.0 and 6.5. Bacteriocin production showed primary metabolite kinetics. pH had a dramatic effect on the production of the bacteriocin, lactococcin 140. A maximum activity of 15.4 × 10⁶ AU (arbitrary units) 1^–1 was obtained after 7 h at pH 5.5. Maximum bacteriocin activity was achieved before the end of growth and was followed by a decrease in activity, which was due to adsorption to the cells of the producing organism, possibly followed by degradation by specific proteases. Both bacteriocin production and degradation rates were higher at pH 5.0 and 5.5, resulting in sharper activity peaks than at pH 6.0 or 6.5. On the basis of the experimental results a qualitative model for bacteriocin production is proposed.     

Screening,selection and development of Bacillus subtilis apr-IBL04 for hyper production of macromolecule alkaline protease

Bacillus subtilis microbe is commonly found in soil and produces proteases on nitrogen and carbon-containing sources and increases the fertility rate by degrading nitrogenous organic materials. The present study was aimed to develop hyper producing mutant strain of B. subtilis for the production of proteases, to improve the process variables by the response surface methodology (RSM) under central composite design (CCD) and the production of protease by the particular mutant strain in a liquid state fermentation media. The mutation of the strain was carried out using ethidium bromide. Pure B. subtilis strain was collected and screened for hyper-production of protease. The production of protease by mutant B. subtilis strain was optimized by varying temperature, inoculum size, pH and incubation time under liquid state fermentation. The CCD model were found to be reliable with r² of 0.999. The maximum enzyme activity of B. subtilis IBL-04 mutant with 3 mL/100 mL inoculum size, 72 h fermentation time, pH 8, and 45 °C temperature was developed with enzyme activity 631.09 U/mL, indicates 1–7-fold increase in enzyme activity than the parent strain having 82.32 U/mL activity. These characteristics render its potential use in industries for pharmaceutical and dairy formulation.     

Evaluation of environmental conditions for production of bacteriocin-like substance by <Emphasis Type="Italic">Bacillus</Emphasis> sp. strain P34

The influence of temperature, pH and media on bacteriocin production by Bacillus sp. P34 was investigated. The effect of temperature and initial pH was evaluated by factorial design and response surface methodology (RSM). Statistical analysis of results showed that, in the range studied, the two variables have a significant effect on bacteriocin production. Response-surface data showed maximum antimicrobial activity production at initial pH values between 6.0 and 8.0 and temperatures between 25 and 37 °C. No relationship between bacterial growth and bacteriocin production was observed. RSM proved to be a powerful tool in optimizing the production of antimicrobial activity by Bacillus sp. P34. When different media were tested, maximum bacteriocin production was observed in soybean protein-based medium, but antimicrobial activity was not achieved by cultivation on fish meal, feather meal, whey and grape waste.     

Fermentative production of dextran using Leuconostoc spp. isolated from fermented food products

Leuconostoc spp. （LSland LI1） isolated from sauerkraut and idli batter was selected for dextran production. To enhance the yield of dextran, effects of various parameters such as sucrose concentration, pH, temperature, incubation and inoculum percentage were analyzed. The optimum sucrose concentration for the Leuconostoc spp. （LS1 and LI1） was found to be 15% and 25% respectively. Isolates produced maximum dextran after 20 h of incubation at 29℃ and the optimum pH was found between 8 and 8.5. The inoculum concentration of 7.5% was more favorable for the production of dextran by Leuconostoc spp. （LS1 and LI1）. The growth kinetic parameters were studied and compared for the strains LS1 and LI1. Mass production of dextran was carried out using a stirred tank batch reactor. FTIR analysis was done to determine the functional groups of dextran, sephadex is prepared by cross linking dextran using epichlorohydrin and the functional groups are determined by FTIR analysis.     

Combination of classical and statistical approaches to enhance the fermentation conditions and increase the yield of Lipopeptide(s) by Pseudomonas sp. OXDC12: its partial purification and determining antifungal property

Around 200 different lipopeptides (LPs) have been identified to date, most of which are produced via Bacillus and Pseudomonas species. The clinical nature of the lipopeptide (LP) has led to a big surge in its research. They show antimicrobial and antitumor activities due to which mass-scale production and purification of LPs are beneficial. Response surface methodology (RSM) approach has emerged as an alternative in the field of computational biology for optimizing the reaction parameters using statistical models. In the present study, Pseudomonas sp. strain OXDC12 was used for production and partial purification of LPs using Thin Layer Chromatography (TLC). The main goal of the study was to increase the overall yield of LPs by optimizing the different variables in the fermentation broth. This was achieved using a combination of one factor at a time (OFAT) and response surface methodology (RSM) approaches. OFAT technique was used to optimize the necessary parameters and was followed by the creation of statistical models (RSM) to optimize the remaining variables. Maximum mycelial growth inhibition (%) against the fungus Mucor sp. was 61.3% for LP. Overall, the combination of both OFAT and RSM helped in increasing the LPs yield by 3 folds from 367mg/L to 1169mg/L.     

Lactobacillus pentosus B231 Isolated from a Portuguese PDO Cheese: Production and Partial Characterization of Its Bacteriocin

Bacteriocin B231 produced by Lactobacillus pentosus, isolated from an artisanal raw cow’s milk protected designation of origin Portuguese cheese, is a small protein with an apparent relative mass of about 5 kDa and active against a large number of Listeria monocytogenes wild-type strains, Listeria ivanovii and Listeria innocua. Bacteriocin B231 production is highly dependent on the type of the culture media used for growth of Lact. pentosus B231. Replacement of glucose with maltose yielded the highest bacteriocin production from eight different carbon sources. Similar results were recorded in the presence of combination of glucose and maltose or galactose. Production of bacteriocin B231 reached maximal levels of 800 AU/ml during the stationary phase of growth of Lact. pentosus B231 in MRS broth at 30 °C. Bacteriocin B231 (in cell-free supernatant) was sensitive to treatment with trypsin and proteinase K, but not affected by the thermal treatment in range of 55–121 °C, or freezing (?20 °C). Bacteriocin production and inhibitory spectrum were evaluated. Gene encoding plantaricin S has been detected in the genomic DNA. Virulence potential and safety of Lact. pentosus B231 were assessed by PCR targeted the genes gelE, hyl, asa1, esp, cylA, efaA, ace, vanA, vanB, hdc1, hdc2, tdc and odc. The Lact. pentosus B231 strains harbored plantaricin S gene, while the occurrence of virulence, antibiotic resistance and biogenic amine genes was limited to cytolysin, hyaluronidase, aggregation substance, adhesion of collagen protein, gelatinase, tyrosine decarboxylase and vancomycin B genes.     

Comparative Assessment of the Artificial Neural Network and Response Surface Modelling Efficiencies for Biohydrogen Production on Sugar Cane Molasses

This study comparatively evaluates the modelling efficiency of the Response Surface Methodology (RSM) and the Artificial Neural Network (ANN). Twenty-nine biohydrogen fermentation batches were carried out to generate the experimental data. The input parameters consisted of a concentration of molasses (50–150 g/l), pH (4–8), temperature (35–40 °C) and inoculum concentration (10–50 %). The obtained data were used to develop the RSM and ANN models. The ANN model was a committee of networks with a topology of 4-(6-10)-1 structured on multilayer perceptrons. RSM and ANN models gave R ² values of 0.75 and 0.91, respectively, with predicted optimum conditions of 150 g/l, 8 and 35 °C for molasses, pH and temperature, respectively, with differences in inoculum concentrations (10.11 and 15 %) for RSM and ANN, respectively. Upon validation, 15.12 and 119.08 % prediction errors on hydrogen volume were found for ANN and RSM, respectively. These findings suggest that ANN has greater accuracy in modelling the relationships between the considered process inputs for fermentative biohydrogen production and thus, is more reliable to navigate the optimization space.     

Optimization of Process Conditions Using Response Surface Methodology (RSM) for Ethanol Production from Pretreated Sugarcane Bagasse: Kinetics and Modeling

Based on a five level central composite design (CCD) involving the variables substrate concentration (C), pH (P), incubation temperature (T) and fermentation time (H), a response surface methodology (RSM) for the production of ethanol from pretreated sugarcane bagasse by cellulase and yeast Kluyveromyces fragilis was standardized. The design contains a total of 31 experimental trials in which the first 24 organized in a factorial design and from 25 to 31 involving the replications of the central points. Data obtained from RSM on ethanol production were subjected to the analysis of variance (ANOVA) and analyzed using a second order polynomial equation. Maximum ethanol concentration (32.6 g/l) was obtained from 180 g/l pretreated sugarcane bagasse at the optimized process conditions (temperature 35°C, pH 5.5) in 72 h aerobic batch fermentation. Various kinetic models such as logistic model, logistic incorporated leudeking piret model and logistic incorporated modified leudeking piret model have been evaluated and the constants were predicted.