The Function of the Hilum in Some Papilionaceae in Relation to the Ripening of the Seed and the Permeability of the Testa

In seeds of Trifolium repens, T. pratense, and Lupinus arboreus,the hilum is a hygroscopically activated valve in the impermeableepidermis of the testa. When relative humidity was low the fissurein the hilum opened permitting the seed to dry out; when therelative humidity was high the fissure closed obstructing theabsorption of moisture. During seed-ripening the moisture contentfell readily to approximately 25 per cent., and thereafter moreslowly until the epidermis became impermeable at approximately14 per cent, moisture content. Further drying of the seed tookplace only by diffusion of water vapour through the hilum. ‘Hard’seeds tended to have a moisture content in equilibrium withthe lowest relative humidity to which they had been exposed.They absorbed moisture under conditions of gradually increasingrelative humidity such that the hilar fissure remained open.The duration of the impermeable condition increased with thedegree of desiccation brought about by loss of water throughthe hilum.     

The mechanical properties of stratum corneum: I. The effect of water and ambient temperature on the tensile properties of newborn rat stratum corneum

The tensile properties of the outermost layer of skin of neonatal rats, the stratum corneum, were investigated at a constant strain rate as a function of moisture content and ambient test temperature. The results show that the mechanical behavior of this membrane, whose primary constituent is the fibrous protein keratin, can be significantly altered by variations in both the sorbed water content and ambient temperature. In particular, a brittle to ductile transition was observed at 25°C once the hydration level exceeded 70% relative humidity. Similarly, an identical phenomenon moisture concentrations were maintained at 10 g H₂O/100 g dry protein. Differential scanning calorimetry measurements showed the presence of a molecular relaxation process which migrated from 42°C at 40% relative humidity to −18°C at 95% relative humidity. It is postulated that this relaxation process, possibly corresponding to the glass transition of the fibrous protein component of stratum corneum, is primarily respnsible for the observed behavior.     

Release behavior of allyl sulfide from cyclodextrin inclusion complex of allyl sulfide under different storage conditions

The stability of allyl sulfide, an organosulfur compound present in garlic oil, in its α-, β-, and γ-cyclodextrin inclusion complexes was investigated under various storage conditions. The complexes of cyclodextrins and allyl sulfide were prepared by spray drying. The storage temperature, relative humidity, and initial moisture content of the inclusion complex had different effects on the release rate of allyl sulfide. Allyl sulfide in α-cyclodextrin complexes had a lower release rate than in β- and γ-cyclodextrin complexes at 100 °C and at 50 °C under 6, 40, 54, and 73% relative humidity. The initial moisture content affected only the release rate of allyl sulfide from α-cyclodextrin complexes. The release behavior of allyl sulfide can be correlated with the first-order release rate equation with a normal Gaussian distribution of free energy of activation of release rate constant. The results indicated α-cyclodextrin is a suitable material for controlled release of allyl sulfide.     

Agricultural Plants and Soil as a Reservoir for Pseudomonas aeruginosa

Pseudomonas aeruginosa was detected in 24% of the soil samples but in only 0.13% of the vegetable samples from various agricultural areas of California. The distribution of pyocin types of soil and vegetable isolates was similar to that of clinical strains, and three of the soil isolates were resistant to carbenicillin. Pseudomonas aeruginosa multiplied in lettuce and bean under conditions of high temperature and high relative humidity (27 C and 80-95% relative humidity) but declined when the temperature and humidity were lowered (16 C, 55-75% relative humidity). The results suggest that soil is a reservior for P. aeruginosa and that the bacterium has the capacity to colonize plants during favorable conditions of temperature and moisture.     

The mechanical properties of stratum corneum. I. The effect of water and ambient temperature on the tensile properties of newborn rat stratum corneum.

The tensile properties of the outermost layer of skin of neonatal rats, the stratum corneum, were investigated at a constant strain rate as a function of moisture content and ambient test temperature. The results show that the mechnical behavior of this membrane, whose primary constituent is the fibrous protein keratin, can be significantly altered by variations in both the sorbed water content and ambient temperature. In particular, a brittle to ductile transition was observed at 25 degrees C once the hydration level exceeded 70% relative humidity. Similarly, an identical phenomenon was detected at temperatures beyond 40 degrees C for specimens whose equilibrium moisture concentrations were maintained at 10 g H2 O/100 g dry protein. Differential scanning calrimetry measurements showed the presence of a molecular relaxation process which migrated from 42 degrees C at 40% relative humidity to --18 degrees C at 95% relative humidity. It is postulated that this relaxation process, possibly corresponding to the glass transition of the fibrous protein component of stratum corneum, is primarily responsible for the observed behavior.     

Effects of a Bacterial Hay Preservative (Pediococcus pentosaceus) on Hay under Experimental Storage Conditions

The abundant growth of molds and thermophilic actinomycetes in stored hay decreases its quality and can be hazardous for the producer who inhales these contaminants when the moldy hay is fed in closed barns. These microbes are responsible for a respiratory disease called farmer's lung. Products, including bacterial cultures that can be inoculated in hay, are available to prevent hay deterioration by molds and bacteria. The aim of this study was to verify the effectiveness of Pediococcus pentosaceus (a bacterial inoculant) in preventing hay deterioration at different humidity levels in a laboratory experiment. Mixtures of grasses (mostly alfalfa, timothy, and clover) placed in plastic bags were treated with the commercially available product (live culture of P. pentosaceus) at 500,000 and 5,000,000 CFU/g of hay and humidified at different levels (20, 25, 30, and 35%). Control batches of hay (untreated) were prepared at the same humidity levels. The growth of inoculated bacteria in hay, pH level, and hay deterioration were evaluated. Under these experimental conditions, the growth of P. pentosaceus was abundant only when it was inoculated in very moist hay (35% moisture), resulting in bacterium levels of 6.3 x 10(sup8) CFU/g after 30 days. This abundant growth did not prevent the pH from increasing (final pH of about 9.0), nor did it prevent molding. At lower humidity levels (20, 25, and 30%), the bacterial inoculant used did not grow and did not prevent hay deterioration.     

Effect of abiotic factors on the burrow density of some sympatric field murids

The burrow density of sympatric murids in relation to various abiotic factorsviz. maximum and minimum atmospheric temperatures, relative humidity, soil temperature and soil moisture was studied in the agro-ecosystem of village Kakrod-Jind (Haryana) Analysis of monthly recorded data on burrow density revealed a biomodal patterni. e. a peak each during the months of September and March · Of these abiotic factors, soil moisture revealed significant positive correlation with the burrow density whereas relative humidity exhibited invariably the least interaction · However, path co-efficient analysis depicted the direct effects of soil temperature and soil moisture and indirect effect of maximum and minimum atmospheric temperature through soil temperature on the burrow density. The use of path co-efficient analysis in such studies has been suggested.     

A Model of the Effect of Temperature and Moisture on Pollen Longevity in Air-dry Storage Environments

Data on the survival of pollen ofTypha latifoliaL. stored forup to 261 d over seven different saturated salt solutions (providing0.5 to 66% relative humidity) and six different constant temperatures(from -5 to +45 °C) were analysed to quantify the effectof air-dry storage environment on pollen longevity. Pollen survivalcurves conformed much more closely to negative cumulative normaldistributions than to negative exponential relations. Estimatesofp₅₀(storage period required to reduce pollen viability to50%), provided by negative cumulative normal distributions,were available from 37 different storage environments in whichpollen viability was reduced below 50%. Once observations at0.5% and 5.5% relative humidity were excluded from analysis,there was a negative logarithmic relation between these estimatesof longevity and pollen moisture content (%, wet basis) anda curvilinear semi-logarithmic relation between longevity andtemperature. When the negative logarithmic relation betweenlongevity and moisture content was replaced by a negative semi-logarithmicrelation between longevity and the relative humidity of thestorage environment the resultant model was less satisfactory,principally because pollen longevity over saturated solutionsof calcium nitrate (43–62% relative humidity) and sodiumnitrite (60–66% relative humidity) were consistently greaterand smaller, respectively, than fitted values. Notwithstandingthese errors, comparison between the fitted relations and observationsat the two lowest relative humidities provided estimates ofthe lower-relative-humidity limits to these relations. Theseprovisional estimates varied with storage temperature beinglowest at 25 °C (<5.5% relative humidity). However, therewas no linear trend to that variation (P>0.25): the meanestimate was 11.9 (s.e.=1.4)%. The considerable similaritiesamong models of pollen longevity in air-dry storage, and theirestimated lower limits, and those developed previously for orthodoxseeds and spores are discussed.Copyright 1999 Annals of BotanyCompany. Typha latifoliaL., pollen, storage, survival, longevity, relative humidity, moisture content, temperature.     

Influence of Platen Temperatures and Storage Conditions on the Survival of Freeze-dried Salmonella typhimurium

Salmonella typhimurium survived freeze-drying at a platen temperature of 120 F (48.9 C) and also, though to a much lesser degree, at 160 F (82.6 C). The extent of the survival at these temperatures was dependent on the composition of the model system employed. The incidence of damage immediately after freeze-drying was greater for cells dried at the higher platen temperature and was influenced by the composition of the menstruum in which the cells were dried. In model systems having protein-dominant isotherms, survival during subsequent storage depended greatly on relative humidity, with recovery highest at relative humidities below those corresponding to moisture contents at which a monomolecular layer is formed. In menstrua having a higher sugar content, survival was best at low relative humidities corresponding to a very low equilibrium moisture content in the model system used. Damage during storage tended to be a function of the composition of the gels in which the organisms were freeze-dried, and also depended greatly on the presence of air and on the relative humidity. The maximal percentage of damage usually occurred at the low relative humidities as storage time increased.     

Invasion of sorghum seed by storage fungi at moisture contents of 13.5–15 % and condition of samples from commercial bins

In sorghum seed stored at 22–25° C for 535 days, invasion by storage fungi and loss of germinability increased greatly with small increases in moisture content between 13.5 and 15.5 %. Seeds dried for 18 hours at 70° C, then exposed to a relative humidity of 75 %, had a lower equilibrium moisture content, but were more heavily invaded by storage fungi and lost germinability fsater, than those that had been conditioned to 20 % moisture before storage at 75 % relative humidity. The 10 samples of Grade No. 2 sorghum examined averaged about 13.0 % moisture, germinated an average of 59 %, yieldedAlternaria from 75 % of the surface-disinfected kernels andAspergillus glaucus from 4 %; judged by these criteria, the lots from which the samples came were in good condition for continued storage.     

Evidence of a maternal effect that protects against water stress in larvae of the American dog tick, Dermacentor variabilis (Acari: Ixodidae)

We report that the ability to absorb water vapor from the air in larvae of the American dog tick, Dermacentor variabilis, changes depending upon moisture conditions where the eggs develop. When development occurs at lower relative humidities, resultant larvae can replenish water stores, maintain water balance, and survive at relative humidities as low as 75-85% RH, a range that agrees with previously published values for the critical equilibrium humidity or CEH. In contrast, exposure to high relative humidity conditions during development elevates the CEH to 93-97% RH. These larvae can survive only at relative humidities that are close to saturation, as 93% RH is a dehydrating atmosphere. For these larvae, absorption at 97% RH can be prevented by blocking the mouthparts with wax, indicating that an upward shift has occurred in the moisture threshold where the active mechanism for water vapor absorption operates. Based on transfer experiments between low and high relative humidities, the CEH of larvae is determined by the relative humidity experienced by the mother rather than the moisture conditions encountered by eggs after they are laid. The fact that no changes in body water content, dehydration tolerance limit and water loss rate were observed implies that adjustments to the CEH conferred by the mother have the adaptive significance of enabling larvae to maintain water balance by limiting the range of hydrating atmospheres.     

Cotton (Gossypium barbadense) production as affected by climatic factors and soil moisture status

This study investigates the statistical relationship between climatic variables and aspects of cotton production (Gossypium barbadense), and the effects of climatic factors prevailing prior to flowering or subsequent to boll setting on flower and boll production and retention in cotton. Also, the study covers the predicted effects of climatic factors during convenient intervals (in days) on cotton flower and boll production compared with daily observations. Further, cotton flower and boll production as affected by climatic factors and soil moisture status has been considered. Evaporation, sunshine duration, relative humidity, surface soil temperature at 1800 h, and maximum air temperature, are the important climatic factors that significantly affect flower and boll production. The least important variables were found to be surface soil temperature at 0600 h and minimum temperature. The 5-day interval was found to be more adequately and sensibly related to yield parameters. Evaporation; minimum humidity and sunshine duration were the most effective climatic factors during preceding and succeeding periods on boll production and retention. There was a negative correlation between flower and boll production and either evaporation or sunshine duration, while that correlation with minimum relative humidity was positive. The soil moisture status showed low and insignificant correlation with flower and boll production. Higher minimum relative humidity, short period of sunshine duration, and low temperatures enhanced flower and boll formation.     

The life-history and epidemiology of American gooseberry mildew on black currants

It is shown that conidia of Sphaerotheca mors-uvae (Schw.) Berk, from gooseberry readily infect black currant; therefore it is unlikely that a new race of S. mors-uvae specifically pathogenic to black currants has recently appeared. However, the life-cycle on black currants differs from that on gooseberry. Incubation, infection and sporulation of the fungus have been examined under the optimum conditions of 18 °C and 100% relative humidity. The establishment of infections and sporulation was encouraged by a relatively low soil moisture content, temperatures above 15 °C, 60% relative humidity and good illumination-factors which promote vigorous plant growth. High phosphorus and high potassium nutrition also increased the susceptibility of black currants to infection.     

Limits to the Negative Logarithmic Relationship Between Moisture Content and Longevity in Conidia ofMetarhizium flavoviride

Conidia ofMetarhizium flavoviridewere hermetically stored at50 °C and 14 moisture contents between 2.5 and 31.8% (freshweight basis) for up to 146 d, and tested for germination onSabouraud Dextrose Agar at 25 °C for 24 h. Survival of conidiaconformed to cumulative negative normal distributions and all14 survival curves could be constrained to a common origin.There was a negative logarithmic relation between longevityand conidia moisture content, but limits to the relation weredetected: the lower-moisture-content limit was 4.6% [in equilibriumwith 10.7% relative humidity (RH) at 20 °C], below whichvalue further reduction in moisture content did not increaseconidia longevity; and an upper-moisture-content limit betweenabout 21.2 and 31.8% moisture content (between 77 and 90.0%equilibrium RH at 20 °C) above which conidia longevity nolonger decreased. The observations could also be described bya negative semi-logarithmic relation between conidia longevityand equilibrium relative humidity. In this model, each reductionin equilibrium relative humidity by 11.2% within the range 10.7to 80% RH doubled conidia longevity. The similarities in theserelations, and the limits to these relations, between the conidiaof this entomopathogenic fungus and the orthodox seeds of higherplants are discussed.Copyright 1998 Annals of Botany Company Conidia longevity, equilibrium relative humidity,Metarhizium flavoviride, moisture content, hermetic storage, viability equation     

Physical properties of peanut hull pellets

Peanut hull (peanut pods and waste materials from processing of peanuts) was pelleted through a 3/16-in. (4.76 mm) diameter die. The effect of change in moisture content (4.2-21.2%, wet basis) of the pellets (due to exposure of the pellets to low or high humidity storage environments) on physical properties were measured. Pelleting increased the bulk density of the peanut hull from 151 kg/m(3) to more than 600 kg/m(3). Bulk density, particle density and durability of the pelleted peanut hull of pellets were significantly affected by moisture content attained by the pellets during exposure to the low or high humidity environment. Air relative humidity significantly influenced the rate at which the pellets exchange moisture with the environment while air temperature did not. The values of the constants of the GAB model were obtained from moisture sorption isotherm at 25 degrees C.     

Establishing a feed value for moulded hay

Fungal invasion in forage materials can occur during plant growth, harvest or storage. End products generated from this activity include fungal biomass, mycotoxin, and fruiting body or spore formation. Spores are predominantly produced by the thermotolerant organisms during storage. Mycotoxin production is observed for forage stored at moisture levels greater than 35%; however, there is little evidence that mycotoxins will occur in hay stored at moisture levels lower than 30%. Hay exposed to precipitation for more than 1 year has not received adequate attention regarding the potential for mycotoxin content.

Fungal biomass (a combination of viable and non-viable mycelia and spores) accumulation was evaluated relative to palatability, intake, digestibility and rumen function. Given a choice, animals will select hay with low levels of fungal biomass contamination. However, results from four studies with growing animals in which hay was offered as the sole feedstuff indicate that intake is determined by the nutrient characteristics of the feedstuff and is not depressed due to presence of mould. Fed as long hay, dry matter digestibility of moulded hay does not differ from clean hay of a similar nutrient profile. Digestibility differences for these hays may become more apparent when chopped. A possible rational may be that the actions of fungal invasion reduce integrity of the forage, causing particle size reduction to be greater when processed. Rumen function does not appear to be impaired when moulded hay is fed.     

Desiccation,Moisture Content and Germination of Zostera marina L. Seed

Zostera marina is the only seagrass species whose seeds have been successfully used in large‐scale restoration. Although progress has been made in refining Z. marina restoration protocols, additional information on Z. marina seed physiology is necessary as the science of seagrass restoration evolves. We tested the germination rates of Z. marina seeds under different relative humidities and temperatures for different periods of time. Z. marina seed moisture content (MC) and germination rates were also tested when seeds were exposed to a temperature of 25°C and relative humidity of 50%. Z. marina seeds suffered higher mortality when exposed to lower relative humidity and higher temperature for longer period of exposure time. A significant negative correlation was detected between seed germination rate and MC. Z. marina seeds are sensitive to desiccation exposure and long periods of exposure to air should be prevented to minimize seed mortality when seeds are used in restoration projects.     

Extrusion processing of high amylose potato starch materials

Thermoplastic starch was prepared by mixing native high amylose potato starch and normal potato starch in a Buss co-kneading extruder at starch to glycerol ratios of 100:45 and 100:30. The materials were also conditioned to different moisture contents at different relative humidities at 23 °C. After the mixing, the compounds were extruded into sheets with a Brabender laboratory extruder. The thermoplastic high amylose materials exhibited a higher melt viscosity than the normal potato starch materials when conditioned at 53% relative humidity. Increasing the moisture content in HAP from 27% to 30% (by weight) lowered the melt viscosity to the same level as that of normal potato starch with a moisture content of 28%. In general, the high amylose materials were more difficult to extrude than the thermoplastic material based on normal starch. The main extrusion problems encountered with the high amylose starch were unstable flow, insufficient melt tenacity and clogging of the die. By increasing the moisture content, increasing the compression ratio of the screw and increasing the rotation rate of the screw, the problems were reduced or eliminated. However, only with a starch to glycerol ratio of 100:45 was an acceptable extrusion result obtained. Extruded sheets of such high amylose materials had a stress at break of about 5 MPa at room temperature and 53% relative humidity, whereas the corresponding value for normal potato (thermoplastic) starch was 3 MPa. The elongation at break was also higher in the case of the high amylose material. The results are discussed in terms of residual crystallinity of the starch materials.     

Effects of soil moisture content on the growth and physiological status of ginger (<Emphasis Type="Italic">Zingiber officinale</Emphasis> Roscoe)

Ginger (Zingiber officinale Roscoe), one of the most valuable economic plants from the Zingiberaceae family, is used worldwide as a spice and flavoring agent in the beverage, bakery, confectionary, and pharmaceutical industries. Soil moisture is one of the most important constraints in ginger cultivation. In the present paper, the phenotype, physiology, biochemistry, and expression difference of genes coding for key enzyme for endogenous hormone metabolism in ginger under different soil moisture conditions (water-filled pore space, WFPS) were measured. Our results indicated that with the increase of soil moisture content, the ramet number of Z. officinale gradually increased, and the ramet number increased to 26.7?±?3.7 at 40% humidity. However, the stem height, stem diameter, and the relative chlorophyll content were highest at 25% humidity. Similarly, the activities of superoxide dismutase (SOD) and peroxidase (POD) as well as the contents of abscisic acid (ABA) and ethylene (Eth) content remained relatively low at 25% humidity, whereas they were relatively high at lower moisture (10%) and higher moisture (30–40%) levels. In addition, the expression patterns of key enzyme-coding genes involved in ABA synthesis and Eth metabolism were analyzed to elucidate the effect of soil moisture on ginger cultivation. The results showed that the expression of the genes were in accordance with the variation of ABA and Eth under different soil moisture levels. In sum, soil moisture significantly affects the growth of Z. officinale, and 25% soil humidity is suitable for the growth of Z. officinale.     

Pollen and seed desiccation tolerance in relation to degree of developmental arrest, dispersal, and survival

In most species, arrest of growth and a decrease in water content occur in seeds and pollen before they are dispersed. However, in a few cases, pollen and seeds may continue to develop (germinate). Examples are cleistogamy and vivipary. In all other cases, seeds and pollen are dispersed with a variable water content (2-70%), and consequently they respond differently to environmental relative humidity that affects dispersal and maintenance of viability in time. Seeds with low moisture content shed by the parent plant after maturation drying can generally desiccate further to moisture contents in the range of 1-5% without damage and have been termed 'orthodox'. Pollen that can withstand dehydration also was recently termed orthodox. Seeds and pollen that do not undergo maturation drying and are shed at relatively high moisture contents (30-70%) are termed 'recalcitrant'. Since recalcitrant seeds and pollen are highly susceptible to desiccation damage, they cannot be stored under conditions suitable for orthodox seeds and pollen. Hence, there are four types of plants with regard to tolerance of pollen and seeds to desiccation. Orthodoxy allows for dispersal over greater distances, longer survival, and greater resistance to low relative humidity. The advantage of recalcitrance is fast germination. Orthodoxy and recalcitrance are often related to environment rather than to systematics. It has been postulated that certain types of genes are involved during presentation and dispersal of pollen and seeds, since molecules (sucrose, polyalcohols, late embryogenic abundant proteins, antioxidants, etc.) that protect different cell compartments during biologically programmed drying have been detected in both.